[Erp5-report] ERP5_simulation r45326 : 238 Tests, 102 Errors, 12 Failures, 4 Skips
nobody at svn.erp5.org
nobody at svn.erp5.org
Tue Apr 12 18:07:19 CEST 2011
Test Suite: ERP5_simulation
Revision: None
Result: FAIL
All tests: 238
Failures: 12
Errors: 102
Skips: 4
The following tests failed:
testAccountingRules (22 errors)
test_04_SimpleInvoice (testAccountingRules.TestSaleAccountingRules), Simple Invoice.
test_04b_SimpleInvoiceConfirm (testAccountingRules.TestSaleAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 lines.
test_04d_SimpleInvoiceTwoCells (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 cells.
test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestSaleAccountingRules), Add a new line then updateAppliedRule.
test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestSaleAccountingRules), Tests that editing a line updates simulation correctly
test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestSaleAccountingRules), Tests that removing a line updates simulation correctly
test_05d_SimpleInvoiceReExpandCreateCell (testAccountingRules.TestSaleAccountingRules), Tests that replacing a line by cells updates simulation correctly
test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestSaleAccountingRules), Tests that updating an applied rule many times doesn't break the
test_06_MultiLineInvoice (testAccountingRules.TestSaleAccountingRules), Multiple lines invoice.
test_planning_invoice_creates_simulation (testAccountingRules.TestSaleAccountingRules)
test_04_SimpleInvoice (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice.
test_04b_SimpleInvoiceConfirm (testAccountingRules.TestPurchaseAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 lines.
test_04d_SimpleInvoiceTwoCells (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 cells.
test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestPurchaseAccountingRules), Add a new line then updateAppliedRule.
test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestPurchaseAccountingRules), Tests that editing a line updates simulation correctly
test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestPurchaseAccountingRules), Tests that removing a line updates simulation correctly
test_05d_SimpleInvoiceReExpandCreateCell (testAccountingRules.TestPurchaseAccountingRules), Tests that replacing a line by cells updates simulation correctly
test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestPurchaseAccountingRules), Tests that updating an applied rule many times doesn't break the
test_06_MultiLineInvoice (testAccountingRules.TestPurchaseAccountingRules), Multiple lines invoice.
test_planning_invoice_creates_simulation (testAccountingRules.TestPurchaseAccountingRules)
testAdvancedInvoicing (1 failures, 3 errors)
test_13_acceptQuantityDivergenceOnInvoiceWithStartedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice), Adopt quantity with stopped packing list
test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), Adopt quantity with stopped packing list
test_04_InvoiceChangeStartDateFail (testAdvancedInvoicing.TestAdvancedSaleInvoice)
testBPMEvaluation (40 errors)
test_confirming (testBPMEvaluation.TestOrderDefaultProcess)
test_starting (testBPMEvaluation.TestPackingListDefaultProcess)
test_confirming (testBPMEvaluation.TestOrderDifferentProcess)
test_starting (testBPMEvaluation.TestPackingListDifferentProcess)
testDeliveryBuilderToSupportMultipleLines (1 failures)
test_03_AcceptingDecision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
testICal (1 errors)
test_02_renderTask (testICal.TestICal)
testImmobilisation (2 failures)
test_19_TestAccountingBuildingAndDivergence (testImmobilisation.TestImmobilisation)
test_20_TestAccountingAcceptDecisionSolver (testImmobilisation.TestImmobilisation)
testInvoice (6 failures, 1 errors)
test_07_InvoiceAddPackingListLine (testInvoice.TestSaleInvoice)
test_09_InvoiceChangeStartDateFail (testInvoice.TestSaleInvoice)
test_09b_InvoiceChangeStartDateSucceed (testInvoice.TestSaleInvoice)
test_modify_planned_order_invoice_transaction_rule (testInvoice.TestSaleInvoice)
test_modify_planned_order_invoicing_rule (testInvoice.TestSaleInvoice)
test_modify_planned_order_invoice_transaction_rule (testInvoice.TestPurchaseInvoice)
test_modify_planned_order_invoicing_rule (testInvoice.TestPurchaseInvoice)
testItem (2 failures, 11 errors)
test_06_VerifyHavingSameItemTwiceOnMovementCausesNoBug (testItem.TestItem)
test_12_CreteSameResourceDifferentItemOrderLines (testItem.TestItem)
test_select_item_dialog_variation (testItem.TestItem)
test_Item_getCurrentOwnerTitle (testItem.TestItemScripts)
test_Item_getCurrentOwnerValue (testItem.TestItemScripts)
test_Item_getCurrentSiteTitle (testItem.TestItemScripts)
test_Item_getCurrentSiteValue (testItem.TestItemScripts)
test_Item_getResourceTitle (testItem.TestItemScripts)
test_Item_getResourceValue (testItem.TestItemScripts)
test_Item_getVariationCategoryList (testItem.TestItemScripts)
test_Item_getVariationRangeCategoryItemList (testItem.TestItemScripts)
test_09_ChangeOrderDateAndAcceptOnPackingList (testItem.TestItem)
test_13_CreateSameResourceDiffrentItemOrderLinesThenChangeTheOrderLinesDate (testItem.TestItem)
testMRP (1 errors, 4 skips)
test_TransformationRule_expand (testMRP.TestMRPImplementation)
testOrderBuilder (4 errors)
test_01_simpleOrderBuilder (testOrderBuilder.TestOrderBuilder)
test_01a_simpleOrderBuilderVariatedResource (testOrderBuilder.TestOrderBuilder)
test_02_maxDelayResourceOrderBuilder (testOrderBuilder.TestOrderBuilder)
test_03_minFlowResourceOrderBuilder (testOrderBuilder.TestOrderBuilder)
testProductionOrder (8 errors)
test_01_testProductionSimulationExpand (testProductionOrder.TestProductionOrder)
test_02_testSourcingSimulationExpand (testProductionOrder.TestProductionOrder)
test_03_testIndustrialPhase (testProductionOrder.TestProductionOrder)
test_04_testProductionSimulationBuild (testProductionOrder.TestProductionOrder)
test_05_testSourcingSimulationBuild (testProductionOrder.TestProductionOrder)
test_06_testIndustrialPhase (testProductionOrder.TestProductionOrder)
test_08_testTransformationWithEfficiency (testProductionOrder.TestProductionOrder)
test_09_testTransformationWithVariation (testProductionOrder.TestProductionOrder)
testProductionOrderApparel (6 errors)
test_01_testProductionSimulationExpand (testProductionOrderApparel.TestProductionOrderApparel)
test_02_testSourcingSimulationExpand (testProductionOrderApparel.TestProductionOrderApparel)
test_03_testIndustrialPhase (testProductionOrderApparel.TestProductionOrderApparel)
test_04_testProductionSimulationBuild (testProductionOrderApparel.TestProductionOrderApparel)
test_05_testSourcingSimulationBuild (testProductionOrderApparel.TestProductionOrderApparel)
test_06_testIndustrialPhase (testProductionOrderApparel.TestProductionOrderApparel)
testProductionPackingList (1 errors)
test_01_sourcingDelivery (testProductionPackingList.TestProductionDelivery)
testProject (1 errors)
testProject_getSourceProjectRelatedTaskReportList (testProject.TestProject)
testReturnedSalePackingList (3 errors)
test_01_ReturnedSalePackingListWithInventory (testReturnedSalePackingList.TestReturnedSalePackingList)
test_02_ReturnedSalePackingListWorkflow (testReturnedSalePackingList.TestReturnedSalePackingList)
test_03_ReturnedSalePackingListWorkflowFail (testReturnedSalePackingList.TestReturnedSalePackingList)
The following tests were at least partly skipped:
testMRP (4 skips)
test_TransformationRule_expand_concurrent (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationRule_expand_reexpand (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationRule_getHeadProductionPathList (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationSourcingRule_expand (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
-------------- next part --------------
A non-text attachment was scrubbed...
Name: summary.diff
Type: text/x-diff
Size: 904 bytes
Desc: not available
URL: <http://mail.tiolive.com/pipermail/erp5-report/attachments/20110412/2072995a/attachment-0001.diff>
-------------- next part --------------
ERROR: test_04_SimpleInvoice (testAccountingRules.TestSaleAccountingRules), Simple Invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1660, in test_04_SimpleInvoice
self.playSequence("""
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
PlanInvoice
Tic
CheckFirstRuleIsApplied
CheckPaymentRuleIsApplied
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCoherantWithSimulation
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_04b_SimpleInvoiceConfirm (testAccountingRules.TestSaleAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1700, in test_04b_SimpleInvoiceConfirm
self.playSequence("""
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 lines.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1738, in test_04c_SimpleInvoiceTwoLines
self.playSequence("""
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoiceTwoLines
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_04d_SimpleInvoiceTwoCells (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 cells.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1776, in test_04d_SimpleInvoiceTwoCells
self.playSequence("""
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoiceTwoCells
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestSaleAccountingRules), Add a new line then updateAppliedRule.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1817, in test_05a_SimpleInvoiceReExpandAddLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateEmptyInvoice
PlanInvoice
Tic
AddInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestSaleAccountingRules), Tests that editing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1856, in test_05b_SimpleInvoiceReExpandEditLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateOtherSimpleInvoice
PlanInvoice
Tic
EditInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestSaleAccountingRules), Tests that removing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1895, in test_05c_SimpleInvoiceReExpandDeleteLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
AddInvoiceLine
PlanInvoice
Tic
DeleteInvoiceLine
Tic
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_05d_SimpleInvoiceReExpandCreateCell (testAccountingRules.TestSaleAccountingRules), Tests that replacing a line by cells updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1936, in test_05d_SimpleInvoiceReExpandCreateCell
self.playSequence("""
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateOtherSimpleInvoice
PlanInvoice
Tic
AddCellsInInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestSaleAccountingRules), Tests that updating an applied rule many times doesn't break the
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2006, in test_05e_SimpleInvoiceExpandManyTimes
""", quiet=quiet )
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
PlanInvoice
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_06_MultiLineInvoice (testAccountingRules.TestSaleAccountingRules), Multiple lines invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2021, in test_06_MultiLineInvoice
self.playSequence("""
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
Tic
CreateNotebookFranceCell
CreateBareboneFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateMultiLineInvoice
PlanInvoice
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForMultiLineInvoice
CheckPaymentLinesCreatedForMultiLineInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_planning_invoice_creates_simulation (testAccountingRules.TestSaleAccountingRules)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2053, in test_planning_invoice_creates_simulation
self.playSequence("""
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
Tic
CreateNotebookFranceCell
CreateBareboneFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
Tic
PlanInvoice
Tic
CheckInvoiceSimulation
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_04_SimpleInvoice (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1660, in test_04_SimpleInvoice
self.playSequence("""
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
PlanInvoice
Tic
CheckFirstRuleIsApplied
CheckPaymentRuleIsApplied
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCoherantWithSimulation
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_04b_SimpleInvoiceConfirm (testAccountingRules.TestPurchaseAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1700, in test_04b_SimpleInvoiceConfirm
self.playSequence("""
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 lines.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1738, in test_04c_SimpleInvoiceTwoLines
self.playSequence("""
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoiceTwoLines
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_04d_SimpleInvoiceTwoCells (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 cells.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1776, in test_04d_SimpleInvoiceTwoCells
self.playSequence("""
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoiceTwoCells
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestPurchaseAccountingRules), Add a new line then updateAppliedRule.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1817, in test_05a_SimpleInvoiceReExpandAddLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateEmptyInvoice
PlanInvoice
Tic
AddInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestPurchaseAccountingRules), Tests that editing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1856, in test_05b_SimpleInvoiceReExpandEditLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateOtherSimpleInvoice
PlanInvoice
Tic
EditInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestPurchaseAccountingRules), Tests that removing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1895, in test_05c_SimpleInvoiceReExpandDeleteLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
AddInvoiceLine
PlanInvoice
Tic
DeleteInvoiceLine
Tic
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_05d_SimpleInvoiceReExpandCreateCell (testAccountingRules.TestPurchaseAccountingRules), Tests that replacing a line by cells updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1936, in test_05d_SimpleInvoiceReExpandCreateCell
self.playSequence("""
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateOtherSimpleInvoice
PlanInvoice
Tic
AddCellsInInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestPurchaseAccountingRules), Tests that updating an applied rule many times doesn't break the
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2006, in test_05e_SimpleInvoiceExpandManyTimes
""", quiet=quiet )
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
PlanInvoice
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_06_MultiLineInvoice (testAccountingRules.TestPurchaseAccountingRules), Multiple lines invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2021, in test_06_MultiLineInvoice
self.playSequence("""
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
Tic
CreateNotebookFranceCell
CreateBareboneFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateMultiLineInvoice
PlanInvoice
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForMultiLineInvoice
CheckPaymentLinesCreatedForMultiLineInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_planning_invoice_creates_simulation (testAccountingRules.TestPurchaseAccountingRules)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2053, in test_planning_invoice_creates_simulation
self.playSequence("""
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 118, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
Tic
CreateNotebookFranceCell
CreateBareboneFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
Tic
PlanInvoice
Tic
CheckInvoiceSimulation
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 202, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_13_acceptQuantityDivergenceOnInvoiceWithStartedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 1026, in test_13_acceptQuantityDivergenceOnInvoiceWithStartedPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
Tic
ChangeQuantityDoubledOnInvoice
Tic
CheckDivergedQuantityOnInvoice
AcceptDecisionOnInvoice
Tic
CheckDivergenceOnInvoice
CheckDivergedOnPackingList
CheckDivergedQuantityOnPackingList
> AdoptPrevisionOnPackingList
Tic
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 247, in stepAdoptPrevisionOnPackingList
divergence_to_adopt_list=divergence_list)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 71, in <lambda>
return lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 104, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/Document/SimulatedDeliveryBuilder.py", line 282, in _solveDivergence
force_update=1)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/mixin/builder.py", line 410, in _processDeliveryGroup
force_update=force_update)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/mixin/builder.py", line 410, in _processDeliveryGroup
force_update=force_update)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/mixin/builder.py", line 410, in _processDeliveryGroup
force_update=force_update)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/mixin/builder.py", line 422, in _processDeliveryGroup
divergence_list)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/mixin/builder.py", line 321, in _findUpdatableObject
result, property_dict = self._test(
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/mixin/builder.py", line 289, in _test
tmp_result, tmp_property_dict = movement_group_node.test(
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/MovementGroup.py", line 156, in test
related_divergence_list = [
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/ObjectMessage.py", line 80, in __getattr__
return getattr(obj, name)
AttributeError: divergence_scope
ERROR: test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice), Adopt quantity with stopped packing list
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 323, in test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
StartPackingList
StopPackingList
Tic
ChangeQuantityDoubledOnInvoice
Tic
CheckDivergedQuantityOnInvoice
> AdoptPrevisionOnInvoice
Tic
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 258, in stepAdoptPrevisionOnInvoice
divergence_to_adopt_list=divergence_list)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 71, in <lambda>
return lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 104, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/Document/SimulatedDeliveryBuilder.py", line 282, in _solveDivergence
force_update=1)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/mixin/builder.py", line 410, in _processDeliveryGroup
force_update=force_update)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/mixin/builder.py", line 410, in _processDeliveryGroup
force_update=force_update)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/mixin/builder.py", line 410, in _processDeliveryGroup
force_update=force_update)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/mixin/builder.py", line 410, in _processDeliveryGroup
force_update=force_update)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/mixin/builder.py", line 422, in _processDeliveryGroup
divergence_list)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/mixin/builder.py", line 321, in _findUpdatableObject
result, property_dict = self._test(
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/mixin/builder.py", line 289, in _test
tmp_result, tmp_property_dict = movement_group_node.test(
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/MovementGroup.py", line 156, in test
related_divergence_list = [
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/ObjectMessage.py", line 80, in __getattr__
return getattr(obj, name)
AttributeError: divergence_scope
ERROR: test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), Adopt quantity with stopped packing list
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 323, in test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
Tic
StartPackingList
StopPackingList
Tic
ChangeQuantityDoubledOnInvoice
Tic
CheckDivergedQuantityOnInvoice
> AdoptPrevisionOnInvoice
Tic
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 258, in stepAdoptPrevisionOnInvoice
divergence_to_adopt_list=divergence_list)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 71, in <lambda>
return lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 104, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/Document/SimulatedDeliveryBuilder.py", line 282, in _solveDivergence
force_update=1)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/mixin/builder.py", line 410, in _processDeliveryGroup
force_update=force_update)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/mixin/builder.py", line 410, in _processDeliveryGroup
force_update=force_update)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/mixin/builder.py", line 410, in _processDeliveryGroup
force_update=force_update)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/mixin/builder.py", line 410, in _processDeliveryGroup
force_update=force_update)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/mixin/builder.py", line 422, in _processDeliveryGroup
divergence_list)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/mixin/builder.py", line 321, in _findUpdatableObject
result, property_dict = self._test(
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/mixin/builder.py", line 289, in _test
tmp_result, tmp_property_dict = movement_group_node.test(
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/MovementGroup.py", line 156, in test
related_divergence_list = [
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/ObjectMessage.py", line 80, in __getattr__
return getattr(obj, name)
AttributeError: divergence_scope
FAIL: test_04_InvoiceChangeStartDateFail (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 597, in test_04_InvoiceChangeStartDateFail
self.playSequence(sequence, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testInvoice.py", line 156, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
ChangeInvoiceStartDate
CheckInvoiceIsDivergent
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
UnifyStartDateWithDecisionInvoice
Tic
CheckInvoiceNotSplitted
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
> CheckPackingListIsDivergent
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testPackingList.py", line 194, in stepCheckPackingListIsDivergent
self.assertTrue(packing_list.isDivergent())
AssertionError
ERROR: test_confirming (testBPMEvaluation.TestOrderDefaultProcess)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 847, in setUp
erp5_catalog_storage=erp5_catalog_storage)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1032, in setUpERP5Site
quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 940, in _installBusinessTemplateList
update_translation=1)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/Base.py", line 237, in __call__
result = apply(self.__dict__['_m'], (instance,) + args, kw)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 4858, in install
return self._install(**kw)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 4796, in _install
trashbin=trashbin, installed_bt=installed_bt)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 3451, in install
self.local_file_importer_name(name)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/Utils.py", line 920, in importLocalDocument
module = imp.load_source(class_path, path)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Document/OrderBuilder.py", line 31, in ?
from Products.ERP5.Document.BPMBuilder import BPMBuilder
ImportError: No module named BPMBuilder
ERROR: test_starting (testBPMEvaluation.TestPackingListDefaultProcess)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 847, in setUp
erp5_catalog_storage=erp5_catalog_storage)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1032, in setUpERP5Site
quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 940, in _installBusinessTemplateList
update_translation=1)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/Base.py", line 237, in __call__
result = apply(self.__dict__['_m'], (instance,) + args, kw)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 4858, in install
return self._install(**kw)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 4796, in _install
trashbin=trashbin, installed_bt=installed_bt)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 3451, in install
self.local_file_importer_name(name)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/Utils.py", line 920, in importLocalDocument
module = imp.load_source(class_path, path)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Document/OrderBuilder.py", line 31, in ?
from Products.ERP5.Document.BPMBuilder import BPMBuilder
ImportError: No module named BPMBuilder
ERROR: test_confirming (testBPMEvaluation.TestOrderDifferentProcess)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 847, in setUp
erp5_catalog_storage=erp5_catalog_storage)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1032, in setUpERP5Site
quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 940, in _installBusinessTemplateList
update_translation=1)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/Base.py", line 237, in __call__
result = apply(self.__dict__['_m'], (instance,) + args, kw)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 4858, in install
return self._install(**kw)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 4796, in _install
trashbin=trashbin, installed_bt=installed_bt)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 3451, in install
self.local_file_importer_name(name)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/Utils.py", line 920, in importLocalDocument
module = imp.load_source(class_path, path)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Document/OrderBuilder.py", line 31, in ?
from Products.ERP5.Document.BPMBuilder import BPMBuilder
ImportError: No module named BPMBuilder
ERROR: test_starting (testBPMEvaluation.TestPackingListDifferentProcess)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 847, in setUp
erp5_catalog_storage=erp5_catalog_storage)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1032, in setUpERP5Site
quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 940, in _installBusinessTemplateList
update_translation=1)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/Base.py", line 237, in __call__
result = apply(self.__dict__['_m'], (instance,) + args, kw)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 4858, in install
return self._install(**kw)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 4796, in _install
trashbin=trashbin, installed_bt=installed_bt)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 3451, in install
self.local_file_importer_name(name)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/Utils.py", line 920, in importLocalDocument
module = imp.load_source(class_path, path)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Document/OrderBuilder.py", line 31, in ?
from Products.ERP5.Document.BPMBuilder import BPMBuilder
ImportError: No module named BPMBuilder
FAIL: test_03_AcceptingDecision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testDeliveryBuilderToSupportMultipleLines.py", line 303, in test_03_AcceptingDecision
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
UpdateBuilderForMultipleLineList
SetPythonScriptForDeliveryBuilder
StartPackingList
CheckInvoicingRule
Tic
GetRelatedInvoiceFromPackingList
UpdateInvoice
Tic
CheckInvoiceIsDivergent
AcceptDecisionInvoiceQuantity
Tic
CheckInvoiceIsNotDivergent
> CheckPackingListIsDivergent
AdoptPrevisionPackingListQuantity
Tic
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testPackingList.py", line 194, in stepCheckPackingListIsDivergent
self.assertTrue(packing_list.isDivergent())
AssertionError
ERROR: test_02_renderTask (testICal.TestICal)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testICal.py", line 209, in test_02_renderTask
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_cefb9b8a3a89a3f683f25c51b36c5dc6/task_module/one', 'Delivery_updateAppliedRule', -2, 1)]
Last error message:
ValueError
No such rule as 'default_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Shared.DC.Scripts.Bindings, line 311, in __call__
Module Shared.DC.Scripts.Bindings, line 348, in _bindAndExec
Module Products.ERP5Type.tests.ERP5TypeTestCase, line 1309, in _exec
Module Products.PythonScripts.PythonScript, line 325, in _exec
Module None, line 47, in Delivery_updateAppliedRule
- <PythonScript at /erp5_portal_cefb9b8a3a89a3f683f25c51b36c5dc6/Delivery_updateAppliedRule used for /erp5_portal_cefb9b8a3a89a3f683f25c51b36c5dc6/task_module/one>
- Line 47
Module AccessControl.ZopeGuards, line 339, in guarded_apply
Module AccessControl.ZopeGuards, line 361, in builtin_guarded_apply
Module Products.ERP5.Document.Order, line 179, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 723, in updateAppliedRule
ValueError: No such rule as 'default_order_rule' is found
FAIL: test_19_TestAccountingBuildingAndDivergence (testImmobilisation.TestImmobilisation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testImmobilisation.py", line 3688, in test_19_TestAccountingBuildingAndDivergence
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
SetTest19SequenceData
DeleteAccounting
Tic
DeleteAllPackingLists
Tic
TestAllAppliedRulesAreEmpty
CreatePackingList
DeliverPackingList
AggregateItems
Tic
BuildAccounting
Tic
TestSimpleAccountingBuild
SetTest19SequenceData2
CreatePackingList
DeliverPackingList
AggregateItems
Tic
TestSimulationBuildAfterFirstAccountingChange
BuildAccounting
Tic
> TestAccountingBuildAfterFirstChange
DeletePackingList
Tic
TestSimulationBuildAfterSecondAccountingChange
BuildAccounting
Tic
TestAccountingBuildAfterSecondChange
AdoptPrevision
Tic
TestAccountingBuildAfterAdoptPrevision
Test19ModifyPackingList
Tic
TestSimulationBuildAfterPackingListModification
BuildAccounting
Tic
TestAccountingBuildAfterPackingListModification
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testImmobilisation.py", line 2520, in stepTestAccountingBuildAfterFirstChange
self._testAccountingBuild(c_transaction_list, e_transaction_list)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testImmobilisation.py", line 2987, in _testAccountingBuild
self.failUnless(e_found_transaction is not None)
AssertionError
FAIL: test_20_TestAccountingAcceptDecisionSolver (testImmobilisation.TestImmobilisation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testImmobilisation.py", line 3765, in test_20_TestAccountingAcceptDecisionSolver
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
SetTest20SequenceData
DeleteAccounting
Tic
DeleteAllPackingLists
Tic
TestAllAppliedRulesAreEmpty
CreatePackingList
DeliverPackingList
AggregateItems
Tic
BuildAccounting
Tic
ConfirmAmortisationTransaction
Tic
TestSimpleAccountingBuild
ChangeAccountingPrice
Tic
AcceptDecision
Tic
> TestSimulationBuildAfterAcceptDecision
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testImmobilisation.py", line 2743, in stepTestSimulationBuildAfterAcceptDecision
self._testSimulationBuild(c_simulation_movement_list, e_simulation_movement_list)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testImmobilisation.py", line 2141, in _testSimulationBuild
self.fail('No expected movement found for\
AssertionError: No expected movement found for portal_simulation/26/start_input_0_0
None
None
0.0
10000.0
currency_module/EUR
account_module/account1
organisation_module/A
2000/01/01
2000/01/01
[{'destination': None,
'destination_section_value': None,
'id': 1,
'profit_quantity': -5000,
'quantity': 10000,
'resource': 'currency_module/EUR',
'source': 'account_module/account1',
'source_section_value': <Organisation at /erp5_portal_168a841f92e1bd50ea96f4abcb5d8d9b/organisation_module/A>,
'start_date': DateTime('2000/01/01'),
'stop_date': DateTime('2000/01/01')}]
ERROR: test_07_InvoiceAddPackingListLine (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2749, in test_07_InvoiceAddPackingListLine
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
AddPackingListLine
SetContainerFullQuantity
> Tic
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 578, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_8685db8faf417b87851d6c5a2ca7dad3/sale_packing_list_module/10', 'expand', -2, 1)]
Last error message:
ValueError
A Business Process can not erase amounts
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 69, in getMovementCollectionDiff
Module Products.ERP5.mixin.rule, line 110, in getGeneratedMovementList
Module Products.ERP5.Document.BusinessProcess, line 714, in getTradePhaseMovementList
ValueError: A Business Process can not erase amounts
FAIL: test_09_InvoiceChangeStartDateFail (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2830, in test_09_InvoiceChangeStartDateFail
self.playSequence(sequence, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testInvoice.py", line 156, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
ChangeInvoiceStartDate
CheckInvoiceIsDivergent
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
UnifyStartDateWithDecisionInvoice
Tic
CheckInvoiceNotSplitted
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
> CheckInvoiceTransactionRule
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testInvoice.py", line 299, in stepCheckInvoiceTransactionRule
parent_movement.getStartDate())
AssertionError: DateTime('2011/05/12 13:12:22.373 GMT') != DateTime('2011/04/27 13:12:22.373 GMT')
FAIL: test_09b_InvoiceChangeStartDateSucceed (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2875, in test_09b_InvoiceChangeStartDateSucceed
self.playSequence(sequence, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testInvoice.py", line 156, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
StopPackingList
Tic
DeliverPackingList
Tic
ChangeInvoiceStartDate
CheckInvoiceIsDivergent
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
UnifyStartDateWithDecisionInvoice
Tic
CheckInvoiceNotSplitted
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
> CheckInvoiceTransactionRule
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testInvoice.py", line 299, in stepCheckInvoiceTransactionRule
parent_movement.getStartDate())
AssertionError: DateTime('2011/05/12 13:12:22.373 GMT') != DateTime('2011/04/27 13:12:22.373 GMT')
FAIL: test_modify_planned_order_invoice_transaction_rule (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testInvoice.py", line 1631, in test_modify_planned_order_invoice_transaction_rule
invoice_transaction_movement.getStartDate())
AssertionError: DateTime('2001/02/03') != DateTime('2008/01/11')
FAIL: test_modify_planned_order_invoicing_rule (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testInvoice.py", line 1415, in test_modify_planned_order_invoicing_rule
invoice_movement.getStartDate())
AssertionError: DateTime('2001/02/03') != DateTime('2008/01/11')
FAIL: test_modify_planned_order_invoice_transaction_rule (testInvoice.TestPurchaseInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testInvoice.py", line 1631, in test_modify_planned_order_invoice_transaction_rule
invoice_transaction_movement.getStartDate())
AssertionError: DateTime('2001/02/03') != DateTime('2008/01/11')
FAIL: test_modify_planned_order_invoicing_rule (testInvoice.TestPurchaseInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testInvoice.py", line 1415, in test_modify_planned_order_invoicing_rule
invoice_movement.getStartDate())
AssertionError: DateTime('2001/02/03') != DateTime('2008/01/11')
ERROR: test_06_VerifyHavingSameItemTwiceOnMovementCausesNoBug (testItem.TestItem)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testItem.py", line 660, in test_06_VerifyHavingSameItemTwiceOnMovementCausesNoBug
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_9e7377d240b5bbc1be56800e3346f083/purchase_packing_list_module/4', 'updateCausalityState', -1, 0), ('/erp5_portal_9e7377d240b5bbc1be56800e3346f083/purchase_packing_list_module/4', 'applyToDeliveryRelatedMovement', -1, 0), ('/erp5_portal_9e7377d240b5bbc1be56800e3346f083/purchase_packing_list_module/4', 'expand', -2, 1)]
Last error message:
ValueError
A Business Process can not erase amounts
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 69, in getMovementCollectionDiff
Module Products.ERP5.mixin.rule, line 110, in getGeneratedMovementList
Module Products.ERP5.Document.BusinessProcess, line 714, in getTradePhaseMovementList
ValueError: A Business Process can not erase amounts
ERROR: test_12_CreteSameResourceDifferentItemOrderLines (testItem.TestItem)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testItem.py", line 787, in test_12_CreteSameResourceDifferentItemOrderLines
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateItemList
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderLineSetAggregationList
CreateItemList
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderSetAggregationList
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
CheckPackingListIsNotDivergent
CheckOrderPackingList
CheckPackingListLineAggregateList
ModifyOrderLinesQuantity
Tic
CheckPackingListIsDiverged
> AdoptPrevisionQuantity
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckPackingListLineWithNewQuantityPrevision
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testPackingList.py", line 697, in stepAdoptPrevisionQuantity
self._solveDivergence(packing_list, 'quantity', 'Adopt Solver')
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testPackingList.py", line 703, in _solveDivergence
solver_decision, = [x for x in solver_process.contentValues()
ValueError: too many values to unpack
ERROR: test_select_item_dialog_variation (testItem.TestItem)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testItem.py", line 949, in test_select_item_dialog_variation
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_9e7377d240b5bbc1be56800e3346f083/portal_deliveries/purchase_invoice_builder', 'build', -1, 0), ('/erp5_portal_9e7377d240b5bbc1be56800e3346f083/purchase_packing_list_module/6', 'updateCausalityState', -1, 0), ('/erp5_portal_9e7377d240b5bbc1be56800e3346f083/purchase_packing_list_module/6', 'applyToDeliveryRelatedMovement', -1, 0), ('/erp5_portal_9e7377d240b5bbc1be56800e3346f083/purchase_packing_list_module/6', 'expand', -2, 1)]
Last error message:
ValueError
A Business Process can not erase amounts
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 69, in getMovementCollectionDiff
Module Products.ERP5.mixin.rule, line 110, in getGeneratedMovementList
Module Products.ERP5.Document.BusinessProcess, line 714, in getTradePhaseMovementList
ValueError: A Business Process can not erase amounts
ERROR: test_Item_getCurrentOwnerTitle (testItem.TestItemScripts)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testItem.py", line 1092, in test_Item_getCurrentOwnerTitle
line = self._makeSalePackingListLine()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/utils.py", line 382, in wrapper
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/1', 'updateCausalityState', -1, 0), ('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/1', 'applyToDeliveryRelatedMovement', -1, 0), ('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/1', 'expand', -2, 1)]
Last error message:
ValueError
A Business Process can not erase amounts
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 69, in getMovementCollectionDiff
Module Products.ERP5.mixin.rule, line 110, in getGeneratedMovementList
Module Products.ERP5.Document.BusinessProcess, line 714, in getTradePhaseMovementList
ValueError: A Business Process can not erase amounts
ERROR: test_Item_getCurrentOwnerValue (testItem.TestItemScripts)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testItem.py", line 1084, in test_Item_getCurrentOwnerValue
line = self._makeSalePackingListLine()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/utils.py", line 382, in wrapper
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/2', 'updateCausalityState', -1, 0), ('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/2', 'applyToDeliveryRelatedMovement', -1, 0), ('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/2', 'expand', -2, 1)]
Last error message:
ValueError
A Business Process can not erase amounts
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 69, in getMovementCollectionDiff
Module Products.ERP5.mixin.rule, line 110, in getGeneratedMovementList
Module Products.ERP5.Document.BusinessProcess, line 714, in getTradePhaseMovementList
ValueError: A Business Process can not erase amounts
ERROR: test_Item_getCurrentSiteTitle (testItem.TestItemScripts)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testItem.py", line 1108, in test_Item_getCurrentSiteTitle
line = self._makeSalePackingListLine()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/utils.py", line 382, in wrapper
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/3', 'updateCausalityState', -1, 0), ('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/3', 'applyToDeliveryRelatedMovement', -1, 0), ('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/3', 'expand', -2, 1)]
Last error message:
ValueError
A Business Process can not erase amounts
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 69, in getMovementCollectionDiff
Module Products.ERP5.mixin.rule, line 110, in getGeneratedMovementList
Module Products.ERP5.Document.BusinessProcess, line 714, in getTradePhaseMovementList
ValueError: A Business Process can not erase amounts
ERROR: test_Item_getCurrentSiteValue (testItem.TestItemScripts)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testItem.py", line 1100, in test_Item_getCurrentSiteValue
line = self._makeSalePackingListLine()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/utils.py", line 382, in wrapper
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/4', 'updateCausalityState', -1, 0), ('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/4', 'applyToDeliveryRelatedMovement', -1, 0), ('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/4', 'expand', -2, 1)]
Last error message:
ValueError
A Business Process can not erase amounts
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 69, in getMovementCollectionDiff
Module Products.ERP5.mixin.rule, line 110, in getGeneratedMovementList
Module Products.ERP5.Document.BusinessProcess, line 714, in getTradePhaseMovementList
ValueError: A Business Process can not erase amounts
ERROR: test_Item_getResourceTitle (testItem.TestItemScripts)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testItem.py", line 1076, in test_Item_getResourceTitle
line = self._makeSalePackingListLine()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/utils.py", line 382, in wrapper
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/5', 'updateCausalityState', -1, 0), ('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/5', 'applyToDeliveryRelatedMovement', -1, 0), ('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/5', 'expand', -2, 1)]
Last error message:
ValueError
A Business Process can not erase amounts
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 69, in getMovementCollectionDiff
Module Products.ERP5.mixin.rule, line 110, in getGeneratedMovementList
Module Products.ERP5.Document.BusinessProcess, line 714, in getTradePhaseMovementList
ValueError: A Business Process can not erase amounts
ERROR: test_Item_getResourceValue (testItem.TestItemScripts)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testItem.py", line 1068, in test_Item_getResourceValue
line = self._makeSalePackingListLine()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/utils.py", line 382, in wrapper
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/6', 'updateCausalityState', -1, 0), ('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/6', 'applyToDeliveryRelatedMovement', -1, 0), ('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/6', 'expand', -2, 1)]
Last error message:
ValueError
A Business Process can not erase amounts
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 69, in getMovementCollectionDiff
Module Products.ERP5.mixin.rule, line 110, in getGeneratedMovementList
Module Products.ERP5.Document.BusinessProcess, line 714, in getTradePhaseMovementList
ValueError: A Business Process can not erase amounts
ERROR: test_Item_getVariationCategoryList (testItem.TestItemScripts)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testItem.py", line 1141, in test_Item_getVariationCategoryList
self._makeSalePackingListCellWithVariation()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/utils.py", line 382, in wrapper
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/7', 'updateCausalityState', -1, 0), ('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/7', 'applyToDeliveryRelatedMovement', -1, 0), ('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/7', 'expand', -2, 1)]
Last error message:
ValueError
A Business Process can not erase amounts
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 69, in getMovementCollectionDiff
Module Products.ERP5.mixin.rule, line 110, in getGeneratedMovementList
Module Products.ERP5.Document.BusinessProcess, line 714, in getTradePhaseMovementList
ValueError: A Business Process can not erase amounts
ERROR: test_Item_getVariationRangeCategoryItemList (testItem.TestItemScripts)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testItem.py", line 1149, in test_Item_getVariationRangeCategoryItemList
self._makeSalePackingListCellWithVariation()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/utils.py", line 382, in wrapper
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/8', 'updateCausalityState', -1, 0), ('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/8', 'applyToDeliveryRelatedMovement', -1, 0), ('/erp5_portal_414eeaef40dfa7a367469c1dc65a93bd/sale_packing_list_module/8', 'expand', -2, 1)]
Last error message:
ValueError
A Business Process can not erase amounts
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 69, in getMovementCollectionDiff
Module Products.ERP5.mixin.rule, line 110, in getGeneratedMovementList
Module Products.ERP5.Document.BusinessProcess, line 714, in getTradePhaseMovementList
ValueError: A Business Process can not erase amounts
FAIL: test_09_ChangeOrderDateAndAcceptOnPackingList (testItem.TestItem)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testItem.py", line 725, in test_09_ChangeOrderDateAndAcceptOnPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateItemList
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderLineSetAggregationList
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderRule
CheckOrderLineAggregate
CheckOrderSimulation
CheckSimulationAggregate
CheckDeliveryBuilding
CheckPackingListIsNotDivergent
CheckPackingListLineAggregate
CheckToRender_Delivery_viewAggregatedItemList
ModifyOneOrderLineStartDate
Tic
> CheckPackingListIsDiverged
CheckPackingListIsDivergent
UnifyStartDateWithPrevision
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckNewPackingListAfterStartDateAdopt
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testPackingList.py", line 226, in stepCheckPackingListIsDiverged
self.assertEquals('diverged', packing_list.getCausalityState())
AssertionError: 'diverged' != 'solved'
FAIL: test_13_CreateSameResourceDiffrentItemOrderLinesThenChangeTheOrderLinesDate (testItem.TestItem)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testItem.py", line 804, in test_13_CreateSameResourceDiffrentItemOrderLinesThenChangeTheOrderLinesDate
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateItemList
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderLineSetAggregationList
CreateItemList
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderSetAggregationList
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
CheckPackingListIsNotDivergent
CheckOrderPackingList
CheckPackingListLineAggregateList
ModifyOrderLinesDate
Tic
> CheckPackingListIsDiverged
UnifyStartDateWithPrevision
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckPackingListStartDateAfterStartDateAdopt
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testPackingList.py", line 226, in stepCheckPackingListIsDiverged
self.assertEquals('diverged', packing_list.getCausalityState())
AssertionError: 'diverged' != 'solved'
ERROR: test_TransformationRule_expand (testMRP.TestMRPImplementation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testMRP.py", line 284, in test_TransformationRule_expand
rule = self.getRule(reference='default_transformation_model_rule')
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 471, in getRule
return self.portal.portal_rules.searchFolder(
File "/usr/lib/erp5/lib/python/Shared/DC/ZRDB/Results.py", line 101, in __getitem__
fields=self._class(self._data[index], parent)
IndexError: tuple index out of range
ERROR: test_01_simpleOrderBuilder (testOrderBuilder.TestOrderBuilder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 300, in test_01_simpleOrderBuilder
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation
CreateNotVariatedResource
SetMaxDelayOnResource
SetMinFlowOnResource
Tic
DecreaseOrganisationResourceQuantity
Tic
CreateOrderBuilder
FillOrderBuilder
Tic
BuildOrderBuilder
Tic
> CheckGeneratedDocumentList
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 158, in stepCheckGeneratedDocumentList
order, = sequence.get('generated_document_list')
ValueError: need more than 0 values to unpack
ERROR: test_01a_simpleOrderBuilderVariatedResource (testOrderBuilder.TestOrderBuilder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 341, in test_01a_simpleOrderBuilderVariatedResource
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation
CreateVariatedResource
SetMaxDelayOnResource
SetMinFlowOnResource
Tic
DecreaseOrganisationResourceQuantityVariated
Tic
CreateOrderBuilder
FillOrderBuilder
Tic
BuildOrderBuilder
Tic
> CheckGeneratedDocumentListVariated
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 132, in stepCheckGeneratedDocumentListVariated
order, = sequence.get('generated_document_list')
ValueError: need more than 0 values to unpack
ERROR: test_02_maxDelayResourceOrderBuilder (testOrderBuilder.TestOrderBuilder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 364, in test_02_maxDelayResourceOrderBuilder
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation
CreateNotVariatedResource
SetMaxDelayOnResource
SetMinFlowOnResource
Tic
DecreaseOrganisationResourceQuantity
Tic
CreateOrderBuilder
FillOrderBuilder
Tic
BuildOrderBuilder
Tic
> CheckGeneratedDocumentList
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 158, in stepCheckGeneratedDocumentList
order, = sequence.get('generated_document_list')
ValueError: need more than 0 values to unpack
ERROR: test_03_minFlowResourceOrderBuilder (testOrderBuilder.TestOrderBuilder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 389, in test_03_minFlowResourceOrderBuilder
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation
CreateNotVariatedResource
SetMaxDelayOnResource
SetMinFlowOnResource
Tic
DecreaseOrganisationResourceQuantity
Tic
CreateOrderBuilder
FillOrderBuilder
Tic
BuildOrderBuilder
Tic
> CheckGeneratedDocumentList
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 158, in stepCheckGeneratedDocumentList
order, = sequence.get('generated_document_list')
ValueError: need more than 0 values to unpack
ERROR: test_01_testProductionSimulationExpand (testProductionOrder.TestProductionOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 1324, in test_01_testProductionSimulationExpand
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateProductionOrganisation1
CreateProductionSC
CreateNotVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
CheckProductionSimulation
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 578, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_303f4118abc2b708b4fa015015b7a00c/production_order_module/1', 'updateAppliedRule', -2, 1)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 179, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 723, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_02_testSourcingSimulationExpand (testProductionOrder.TestProductionOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 1351, in test_02_testSourcingSimulationExpand
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateProductionOrganisation1
CreateSupplyOrganisation1
CreateSourcingSC
CreateNotVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
CheckSourcingSimulation
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 578, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_303f4118abc2b708b4fa015015b7a00c/production_order_module/2', 'updateAppliedRule', -2, 1)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 179, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 723, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_03_testIndustrialPhase (testProductionOrder.TestProductionOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 1379, in test_03_testIndustrialPhase
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateProductionOrganisation1
CreateProductionOrganisation2
CreateSupplyOrganisation1
CreateSupplyOrganisation2
CreateTwoPhasesSC
CreateNotVariatedResource
CreateComponent1
CreateComponent2
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
CheckTwoPhasesSimulation
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 578, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_303f4118abc2b708b4fa015015b7a00c/production_order_module/3', 'updateAppliedRule', -2, 1)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 179, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 723, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_04_testProductionSimulationBuild (testProductionOrder.TestProductionOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 1406, in test_04_testProductionSimulationBuild
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateProductionOrganisation1
CreateProductionSC
CreateNotVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
ConfirmOrder
Tic
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 578, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_303f4118abc2b708b4fa015015b7a00c/production_order_module/4', 'updateAppliedRule', -2, 1)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 179, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 723, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_05_testSourcingSimulationBuild (testProductionOrder.TestProductionOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 1419, in test_05_testSourcingSimulationBuild
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateProductionOrganisation1
CreateSupplyOrganisation1
CreateSourcingSC
CreateNotVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
CheckSourcingSimulation
ConfirmOrder
Tic
CheckSourcingSimulation
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 578, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_303f4118abc2b708b4fa015015b7a00c/production_order_module/5', 'updateAppliedRule', -2, 1)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 179, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 723, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_06_testIndustrialPhase (testProductionOrder.TestProductionOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 1450, in test_06_testIndustrialPhase
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateProductionOrganisation1
CreateProductionOrganisation2
CreateSupplyOrganisation1
CreateSupplyOrganisation2
CreateTwoPhasesSC
CreateNotVariatedResource
CreateComponent1
CreateComponent2
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
ConfirmOrder
Tic
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 578, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_303f4118abc2b708b4fa015015b7a00c/production_order_module/6', 'updateAppliedRule', -2, 1)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 179, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 723, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_08_testTransformationWithEfficiency (testProductionOrder.TestProductionOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 1605, in test_08_testTransformationWithEfficiency
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateProductionOrganisation1
CreateSupplyOrganisation1
CreateSourcingSC
Tic
CreateNotVariatedResource
CreateComponent1
CreateEmptyTransformation
FillTransformationWithResource
Tic
CreateTransformationTransformedResource
FillTransformationTransformedResourceWithComponent1
SetTransformationTransformedResourceQuantity
SetTransformationTransformedResourceEfficiency
SetTransformationTransformedResourceIndustrialPhaseList
Tic
CreateOrganisation
CreateOrder
CreateOrderLine
SetOrderLineQuantity
Tic
OrderOrder
> Tic
CheckEfficiencySimulation
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 578, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_303f4118abc2b708b4fa015015b7a00c/production_order_module/13', 'updateAppliedRule', -2, 1)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 179, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 723, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_09_testTransformationWithVariation (testProductionOrder.TestProductionOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 1736, in test_09_testTransformationWithVariation
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateProductionOrganisation1
CreateSupplyOrganisation1
CreateSourcingSC
Tic
CreateColourSizeVariatedResource
CreateColourSizeVariatedComponent1
Tic
CreateEmptyTransformation
FillTransformationWithResource
SetTransformationVariation
Tic
CreateTransformationTransformedResource
FillTransformationTransformedResourceWithComponent1
SetTransformationTransformedResourceVariation
SetTransformationTransformedResourceIndustrialPhaseList
Tic
SetTransformationTransformedResourceQuantityMatrix
SetTransformationTransformedResourceVariationMatrix
Tic
CreateOrganisation
CreateOrder
CreateOrderLine
SetOrderLineVariationCategories
SetOrderLineQuantityMatrix
Tic
OrderOrder
> Tic
CheckVariationSimulation
ConfirmOrder
Tic
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 578, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_303f4118abc2b708b4fa015015b7a00c/production_order_module/14', 'updateAppliedRule', -2, 1)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 179, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 723, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_01_testProductionSimulationExpand (testProductionOrderApparel.TestProductionOrderApparel)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testProductionOrderApparel.py", line 960, in test_01_testProductionSimulationExpand
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateProductionOrganisation1
CreateProductionSC
CreateVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
CheckProductionSimulation
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 578, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_18666b9bab8a3375d895dac359522af0/production_order_module/1', 'updateAppliedRule', -2, 1)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 179, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 723, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_02_testSourcingSimulationExpand (testProductionOrderApparel.TestProductionOrderApparel)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testProductionOrderApparel.py", line 987, in test_02_testSourcingSimulationExpand
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateProductionOrganisation1
CreateSupplyOrganisation1
CreateSourcingSC
CreateVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
CheckSourcingSimulation
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 578, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_18666b9bab8a3375d895dac359522af0/production_order_module/2', 'updateAppliedRule', -2, 1)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 179, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 723, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_03_testIndustrialPhase (testProductionOrderApparel.TestProductionOrderApparel)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testProductionOrderApparel.py", line 1015, in test_03_testIndustrialPhase
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateProductionOrganisation1
CreateProductionOrganisation2
CreateSupplyOrganisation1
CreateSupplyOrganisation2
CreateTwoPhasesSC
CreateVariatedResource
CreateComponent1
CreateComponent2
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
CheckTwoPhasesSimulation
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 578, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_18666b9bab8a3375d895dac359522af0/production_order_module/3', 'updateAppliedRule', -2, 1)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 179, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 723, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_04_testProductionSimulationBuild (testProductionOrderApparel.TestProductionOrderApparel)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testProductionOrderApparel.py", line 1042, in test_04_testProductionSimulationBuild
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateProductionOrganisation1
CreateProductionSC
CreateVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
ConfirmOrder
Tic
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 578, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_18666b9bab8a3375d895dac359522af0/production_order_module/4', 'updateAppliedRule', -2, 1)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 179, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 723, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_05_testSourcingSimulationBuild (testProductionOrderApparel.TestProductionOrderApparel)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testProductionOrderApparel.py", line 1055, in test_05_testSourcingSimulationBuild
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateProductionOrganisation1
CreateSupplyOrganisation1
CreateSourcingSC
CreateVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
CheckSourcingSimulation
ConfirmOrder
Tic
CheckSourcingSimulation
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 578, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_18666b9bab8a3375d895dac359522af0/production_order_module/5', 'updateAppliedRule', -2, 1)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 179, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 723, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_06_testIndustrialPhase (testProductionOrderApparel.TestProductionOrderApparel)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testProductionOrderApparel.py", line 1086, in test_06_testIndustrialPhase
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateProductionOrganisation1
CreateProductionOrganisation2
CreateSupplyOrganisation1
CreateSupplyOrganisation2
CreateTwoPhasesSC
CreateVariatedResource
CreateComponent1
CreateComponent2
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
ConfirmOrder
Tic
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 578, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_18666b9bab8a3375d895dac359522af0/production_order_module/6', 'updateAppliedRule', -2, 1)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 179, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 723, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_01_sourcingDelivery (testProductionPackingList.TestProductionDelivery)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testProductionPackingList.py", line 778, in test_01_sourcingDelivery
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateProductionOrganisation1
CreateSupplyOrganisation1
CreateSourcingSC
CreateNotVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
CheckSourcingSimulation
ConfirmOrder
Tic
CheckSourcingSimulation
CheckSourcingDeliverySimulation
CheckProducedDeliveryPackingListIsConfirmed
CheckProducedDeliveryPackingListIsSolved
CheckSupplyDeliveryPackingListIsConfirmed
CheckSupplyDeliveryPackingListIsSolved
CheckProducedReportIsConfirmed
CheckProducedReportIsSolved
CheckConsumedReportIsConfirmed
CheckConsumedReportIsSolved
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 578, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_48108743c153265094a1592efa897f58/production_order_module/1', 'updateAppliedRule', -2, 1)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 179, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 723, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: testProject_getSourceProjectRelatedTaskReportList (testProject.TestProject)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testProject.py", line 154, in testProject_getSourceProjectRelatedTaskReportList
self.stepTic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 578, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_935356b6767f9f8e1c9e799702358714/task_report_module/1', 'updateCausalityState', -1, 0), ('/erp5_portal_935356b6767f9f8e1c9e799702358714/task_report_module/1', 'Delivery_updateAppliedRule', -2, 1)]
Last error message:
ValueError
No such rule as 'default_delivery_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Shared.DC.Scripts.Bindings, line 311, in __call__
Module Shared.DC.Scripts.Bindings, line 348, in _bindAndExec
Module Products.ERP5Type.tests.ERP5TypeTestCase, line 1309, in _exec
Module Products.PythonScripts.PythonScript, line 325, in _exec
Module None, line 47, in Delivery_updateAppliedRule
- <PythonScript at /erp5_portal_935356b6767f9f8e1c9e799702358714/Delivery_updateAppliedRule used for /erp5_portal_935356b6767f9f8e1c9e799702358714/task_report_module/1>
- Line 47
Module AccessControl.ZopeGuards, line 339, in guarded_apply
Module AccessControl.ZopeGuards, line 361, in builtin_guarded_apply
Module Products.ERP5.Document.PackingList, line 125, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 723, in updateAppliedRule
ValueError: No such rule as 'default_delivery_rule' is found
ERROR: test_01_ReturnedSalePackingListWithInventory (testReturnedSalePackingList.TestReturnedSalePackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testReturnedSalePackingList.py", line 460, in test_01_ReturnedSalePackingListWithInventory
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateCurrency
CreateNotVariatedResource
Tic
Tic
CreateInitialInventory
Tic
CheckInitialInventory
CreateReturnedPackingList
ConfirmReturnedPackingList
ShipReturnedPackingList
ReceiveReturnedPackingList
DeliverReturnedPackingList
> Tic
CheckReturnedInventory
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 578, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_dc2688613f27509924625a9a445111a0/returned_sale_packing_list_module/1', 'updateCausalityState', -1, 0), ('/erp5_portal_dc2688613f27509924625a9a445111a0/returned_sale_packing_list_module/1', 'updateCausalityState', -1, 0), ('/erp5_portal_dc2688613f27509924625a9a445111a0/returned_sale_packing_list_module/1', 'Delivery_updateAppliedRule', -1, 0), ('/erp5_portal_dc2688613f27509924625a9a445111a0/returned_sale_packing_list_module/1', 'applyToDeliveryRelatedMovement', -1, 0), ('/erp5_portal_dc2688613f27509924625a9a445111a0/returned_sale_packing_list_module/1', 'Delivery_updateAppliedRule', -1, 0), ('/erp5_portal_dc2688613f27509924625a9a445111a0/returned_sale_packing_list_module/1', 'applyToDeliveryRelatedMovement', -1, 0), ('/erp5_portal_dc2688613f27509924625a9a445111a0/returned_sale_packing_list_module/1', 'expand', -2, 1)]
Last error message:
ValueError
A Business Process can not erase amounts
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 69, in getMovementCollectionDiff
Module Products.ERP5.mixin.rule, line 110, in getGeneratedMovementList
Module Products.ERP5.Document.BusinessProcess, line 714, in getTradePhaseMovementList
ValueError: A Business Process can not erase amounts
ERROR: test_02_ReturnedSalePackingListWorkflow (testReturnedSalePackingList.TestReturnedSalePackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testReturnedSalePackingList.py", line 490, in test_02_ReturnedSalePackingListWorkflow
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateCurrency
CreateNotVariatedResource
Tic
Tic
CreateReturnedPackingList
ConfirmReturnedPackingList
> Tic
CheckConfirmedReturnedPackingList
ShipReturnedPackingList
Tic
CheckShippedReturnedPackingList
ReceiveReturnedPackingList
Tic
CheckReceivedReturnedPackingList
DeliverReturnedPackingList
Tic
CheckDeliveredReturnedPackingList
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 578, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_dc2688613f27509924625a9a445111a0/returned_sale_packing_list_module/2', 'updateCausalityState', -1, 0), ('/erp5_portal_dc2688613f27509924625a9a445111a0/returned_sale_packing_list_module/2', 'Delivery_updateAppliedRule', -1, 0), ('/erp5_portal_dc2688613f27509924625a9a445111a0/returned_sale_packing_list_module/2', 'applyToDeliveryRelatedMovement', -1, 0), ('/erp5_portal_dc2688613f27509924625a9a445111a0/returned_sale_packing_list_module/2', 'expand', -2, 1)]
Last error message:
ValueError
A Business Process can not erase amounts
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 69, in getMovementCollectionDiff
Module Products.ERP5.mixin.rule, line 110, in getGeneratedMovementList
Module Products.ERP5.Document.BusinessProcess, line 714, in getTradePhaseMovementList
ValueError: A Business Process can not erase amounts
ERROR: test_03_ReturnedSalePackingListWorkflowFail (testReturnedSalePackingList.TestReturnedSalePackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5_simulation/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5/tests/testReturnedSalePackingList.py", line 524, in test_03_ReturnedSalePackingListWorkflowFail
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateCurrency
CreateNotVariatedResource
Tic
Tic
CreateReturnedPackingList
ConfirmReturnedPackingList
> Tic
CheckConfirmedReturnedPackingList
ShipReturnedPackingList
Tic
CheckShippedReturnedPackingList
ReceiveReturnedPackingList
Tic
CheckReceivedReturnedPackingList
DeliverReturnedPackingList
Tic
CheckDeliveredReturnedPackingList
Tic
ConfirmReturnedPackingList
Tic
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 578, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5_simulation/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_dc2688613f27509924625a9a445111a0/returned_sale_packing_list_module/3', 'updateCausalityState', -1, 0), ('/erp5_portal_dc2688613f27509924625a9a445111a0/returned_sale_packing_list_module/3', 'Delivery_updateAppliedRule', -1, 0), ('/erp5_portal_dc2688613f27509924625a9a445111a0/returned_sale_packing_list_module/3', 'applyToDeliveryRelatedMovement', -1, 0), ('/erp5_portal_dc2688613f27509924625a9a445111a0/returned_sale_packing_list_module/3', 'expand', -2, 1)]
Last error message:
ValueError
A Business Process can not erase amounts
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 69, in getMovementCollectionDiff
Module Products.ERP5.mixin.rule, line 110, in getGeneratedMovementList
Module Products.ERP5.Document.BusinessProcess, line 714, in getTradePhaseMovementList
ValueError: A Business Process can not erase amounts
More information about the Erp5-report
mailing list