[Erp5-report] ERP5 r39991 : 4293 Tests, 94 Errors, 29 Failures, 190 Skips
nobody at svn.erp5.org
nobody at svn.erp5.org
Fri Nov 5 23:20:18 CET 2010
Test Suite: ERP5
Revision: 39991
Result: FAIL
All tests: 4293
Failures: 29
Errors: 94
Skips: 190
The following tests failed:
testAccountingRules (26 errors)
test_02_UpdateInvoiceTransactionRuleMatrix (testAccountingRules.TestSaleAccountingRules), test edition of matrix and rule.
test_03_invoiceTransactionRule_getMatchingCell (testAccountingRules.TestSaleAccountingRules), test predicates for the cells of invoice transaction rule
test_04_SimpleInvoice (testAccountingRules.TestSaleAccountingRules), Simple Invoice.
test_04b_SimpleInvoiceConfirm (testAccountingRules.TestSaleAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 lines.
test_04d_SimpleInvoiceTwoCells (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 cells.
test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestSaleAccountingRules), Add a new line then updateAppliedRule.
test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestSaleAccountingRules), Tests that editing a line updates simulation correctly
test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestSaleAccountingRules), Tests that removing a line updates simulation correctly
test_05d_SimpleInvoiceReExpandCreateCell (testAccountingRules.TestSaleAccountingRules), Tests that replacing a line by cells updates simulation correctly
test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestSaleAccountingRules), Tests that updating an applied rule many times doesn't break the
test_06_MultiLineInvoice (testAccountingRules.TestSaleAccountingRules), Multiple lines invoice.
test_planning_invoice_creates_simulation (testAccountingRules.TestSaleAccountingRules)
test_02_UpdateInvoiceTransactionRuleMatrix (testAccountingRules.TestPurchaseAccountingRules), test edition of matrix and rule.
test_03_invoiceTransactionRule_getMatchingCell (testAccountingRules.TestPurchaseAccountingRules), test predicates for the cells of invoice transaction rule
test_04_SimpleInvoice (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice.
test_04b_SimpleInvoiceConfirm (testAccountingRules.TestPurchaseAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 lines.
test_04d_SimpleInvoiceTwoCells (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 cells.
test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestPurchaseAccountingRules), Add a new line then updateAppliedRule.
test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestPurchaseAccountingRules), Tests that editing a line updates simulation correctly
test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestPurchaseAccountingRules), Tests that removing a line updates simulation correctly
test_05d_SimpleInvoiceReExpandCreateCell (testAccountingRules.TestPurchaseAccountingRules), Tests that replacing a line by cells updates simulation correctly
test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestPurchaseAccountingRules), Tests that updating an applied rule many times doesn't break the
test_06_MultiLineInvoice (testAccountingRules.TestPurchaseAccountingRules), Multiple lines invoice.
test_planning_invoice_creates_simulation (testAccountingRules.TestPurchaseAccountingRules)
testAlarm (1 errors)
test_19_ManualInvocation (testAlarm.TestAlarm)
testApparelModel (1 errors)
test_checkCopyComposition (testApparelModel.TestApparelModel)
testArchive (1 failures)
test_Archive (testArchive.TestArchive)
testBPMCore (4 failures, 8 skips)
test_isBuildable_OrderedDeliveredInvoiced (testBPMCore.TestBPMisBuildableImplementation), Test isBuildable for ordered, delivered and invoiced sequence
test_isBuildable_OrderedInvoicedDelivered (testBPMCore.TestBPMisBuildableImplementation), Test isBuildable for ordered, invoiced and delivered sequence
test_isFrozen_OrderedDeliveredInvoiced (testBPMCore.TestBPMisFrozenImplementation), Test isFrozen for ordered, delivered and invoiced sequence
test_isFrozen_OrderedInvoicedDelivered (testBPMCore.TestBPMisFrozenImplementation), Test isFrozen for ordered, invoiced and invoiced sequence
testClassTool (2 failures)
test_AsDocumentationHelperOnClassTool (testClassTool.TestClassTool)
test_AsDocumentationHelperOnDocument (testClassTool.TestClassTool)
testDeliveryBuilderToSupportMultipleLines (3 errors)
test_02_AdoptingPrevision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
test_03_AcceptingDecision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
test_04_MergingMultipleSaleOrders (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
testDmsWithFlare (2 failures, 3 skips)
test_Member_download_pdf_format (testDmsWithFlare.TestDocumentWithFlare)
test_parallel_conversion (testDmsWithFlare.TestDocumentWithFlare), Check that conversion engine is able to fill in
testDocumentationHelper (2 errors)
test_02_BusinessTemplate (testDocumentationHelper.TestDocumentationHelper), Documentation of Business Template
test_03_PortalType (testDocumentationHelper.TestDocumentationHelper), Documentation of Portal Type
testDynamicClassGeneration (1 errors, 17 skips)
testZodbImportPropertySheet (testDynamicClassGeneration.TestZodbImportFilesystemPropertySheet)
testERP5Interfaces (1 errors, 13 skips)
test_Products.ERP5Type.Document.BusinessLink_BusinessLink_implements_IArrowBase (testERP5Interfaces.TestERP5Interfaces)
testICal (1 errors)
test_02_renderTask (testICal.TestICal)
testImmobilisation (2 failures)
test_19_TestAccountingBuildingAndDivergence (testImmobilisation.TestImmobilisation)
test_20_TestAccountingAcceptDecisionSolver (testImmobilisation.TestImmobilisation)
testInvalidationBug (2 failures)
testCommitOrder (testInvalidationBug.TestInvalidationBug), Check order of resources being committed
testLateInvalidationFromZEO (testInvalidationBug.TestInvalidationBug)
testLegacyBPMCore (4 failures)
test_isBuildable_OrderedDeliveredInvoiced (testLegacyBPMCore.TestBPMisBuildableImplementation), Test isBuildable for ordered, delivered and invoiced sequence
test_isBuildable_OrderedInvoicedDelivered (testLegacyBPMCore.TestBPMisBuildableImplementation), Test isBuildable for ordered, invoiced and delivered sequence
test_isFrozen_OrderedDeliveredInvoiced (testLegacyBPMCore.TestBPMisFrozenImplementation), Test isFrozen for ordered, delivered and invoiced sequence
test_isFrozen_OrderedInvoicedDelivered (testLegacyBPMCore.TestBPMisFrozenImplementation), Test isFrozen for ordered, invoiced and invoiced sequence
testLegacyTradeModelLine (4 failures)
test_01c_PackingListSplitBuildInvoiceBuild (Products.ERP5.tests.testTradeModelLine.TestTradeModelLineSale)
test_tradeModelLineWithRounding (Products.ERP5.tests.testTradeModelLine.TestTradeModelLineSale)
test_01c_PackingListSplitBuildInvoiceBuild (Products.ERP5.tests.testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_tradeModelLineWithRounding (Products.ERP5.tests.testTradeModelLinePurchase.TestTradeModelLinePurchase)
testOpenOrder (4 errors)
testBuildingSaleOrder (testOpenOrder.TestOpenOrder)
testOpenOrderRule (testOpenOrder.TestOpenOrder)
testPeriodicityDateList (testOpenOrder.TestOpenOrder)
testPeriodicityDateListUniversal (testOpenOrder.TestOpenOrder)
testOrderBuilder (4 failures)
test_01_simpleOrderBuilder (testOrderBuilder.TestOrderBuilder)
test_01a_simpleOrderBuilderVariatedResource (testOrderBuilder.TestOrderBuilder)
test_02_maxDelayResourceOrderBuilder (testOrderBuilder.TestOrderBuilder)
test_03_minFlowResourceOrderBuilder (testOrderBuilder.TestOrderBuilder)
testPayroll (20 errors)
test_AccountingLineGeneration (testPayroll.TestPayroll)
test_NetSalaryReport (testPayroll.TestPayroll)
test_PayrollTaxesReport (testPayroll.TestPayroll)
test_PayrollTaxesReportDifferentSalaryRange (testPayroll.TestPayroll)
test_basicPaySheetCalculation (testPayroll.TestPayroll)
test_complexSliceOnModelLine (testPayroll.TestPayroll)
test_intermediateLines (testPayroll.TestPayroll)
test_modelDateValidity (testPayroll.TestPayroll), check that model effective_date and expiration_date are take into
test_modelLineWithNonePrice (testPayroll.TestPayroll)
test_modelWithoutDateValidity (testPayroll.TestPayroll), Check that if no DATE are defined on a model, the behavior is that
test_modelWithoutReferenceValidity (testPayroll.TestPayroll), Check that if no REFERENCE are defined on a model, the behavior is
test_paySheetCalculationWithBonus (testPayroll.TestPayroll)
test_predicateOnModelLine (testPayroll.TestPayroll)
test_propertiesAreSetOnPaysheetLines (testPayroll.TestPayroll), check porperties from model line (like description, int_index,
test_sliceOnModelLine (testPayroll.TestPayroll)
test_sourceSectionIsSetOnMovements (testPayroll.TestPayroll)
test_updateAddMovements (testPayroll.TestPayroll)
test_updateModifyMovements (testPayroll.TestPayroll)
test_updatePaysheetAfterModelModification (testPayroll.TestPayroll), generate a paysheet using a model, modify the model by adding a new
test_updateRemoveMovements (testPayroll.TestPayroll)
testPayroll_l10n_fr (1 errors)
test_01_getYearToDateSlice (testPayroll_l10n_fr.TestPayroll_l10n_fr), Check that is possible to calculate the total amount spend on a slice
testProductionOrder (8 errors)
test_01_testProductionSimulationExpand (testProductionOrder.TestProductionOrder)
test_02_testSourcingSimulationExpand (testProductionOrder.TestProductionOrder)
test_03_testIndustrialPhase (testProductionOrder.TestProductionOrder)
test_04_testProductionSimulationBuild (testProductionOrder.TestProductionOrder)
test_05_testSourcingSimulationBuild (testProductionOrder.TestProductionOrder)
test_06_testIndustrialPhase (testProductionOrder.TestProductionOrder)
test_08_testTransformationWithEfficiency (testProductionOrder.TestProductionOrder)
test_09_testTransformationWithVariation (testProductionOrder.TestProductionOrder)
testProductionOrderApparel (6 errors)
test_01_testProductionSimulationExpand (testProductionOrderApparel.TestProductionOrderApparel)
test_02_testSourcingSimulationExpand (testProductionOrderApparel.TestProductionOrderApparel)
test_03_testIndustrialPhase (testProductionOrderApparel.TestProductionOrderApparel)
test_04_testProductionSimulationBuild (testProductionOrderApparel.TestProductionOrderApparel)
test_05_testSourcingSimulationBuild (testProductionOrderApparel.TestProductionOrderApparel)
test_06_testIndustrialPhase (testProductionOrderApparel.TestProductionOrderApparel)
testProductionPackingList (1 errors)
test_01_sourcingDelivery (testProductionPackingList.TestProductionDelivery)
testProductionPackingListApparel (1 errors)
test_01_sourcingDelivery (testProductionPackingListApparel.TestProductionDeliveryApparel)
testProject (1 errors)
testProject_getSourceProjectRelatedTaskReportList (testProject.TestProject)
testReturnedSalePackingList (3 errors)
test_01_ReturnedSalePackingListWithInventory (testReturnedSalePackingList.TestReturnedSalePackingList)
test_02_ReturnedSalePackingListWorkflow (testReturnedSalePackingList.TestReturnedSalePackingList)
test_03_ReturnedSalePackingListWorkflowFail (testReturnedSalePackingList.TestReturnedSalePackingList)
testRule (11 errors)
test_01_ValidatedRuleWithNoScript (testRule.TestRule)
test_02_WrongTestMethod (testRule.TestRule)
test_03_GoodTestMethod (testRule.TestRule)
test_04_NotValidatedRule (testRule.TestRule)
test_06_WrongDateRange (testRule.TestRule)
test_07_GoodDateRange (testRule.TestRule)
test_08_updateAppliedRule (testRule.TestRule)
test_09_expandTwoRules (testRule.TestRule)
test_10_expandAddsRule (testRule.TestRule)
test_11_expandRemovesRule (testRule.TestRule)
test_12_expandReplacesRule (testRule.TestRule)
testSessionTool (1 errors)
test_03_MemcachedDistributedSession (testSessionTool.TestSessionTool), Test DistributedSession which uses memcached based cache plugin.
testTaskReporting (1 errors)
testProjectMontlyReport (testTaskReporting.TestTaskReporting)
testTradeModelLine (1 failures)
test_tradeModelLineWithRounding (testTradeModelLine.TestTradeModelLineSale)
testTradeModelLinePurchase (1 failures)
test_tradeModelLineWithRounding (testTradeModelLinePurchase.TestTradeModelLinePurchase)
testXHTML (2 failures)
test_configurationOfFieldLibrary (testXHTML.TestXHTML)
test_duplicatingSelectionNameInListbox (testXHTML.TestXHTML)
The following tests were at least partly skipped:
testAdvancedInvoicing (4 skips)
testBPMCore (8 skips)
testBPMEvaluation (40 skips)
done (7.247s)test_confirming (testBPMEvaluation.TestOrderDefaultProcess) ... skipped 'broken since r39918'
test_transition (testBPMEvaluation.TestOrderDefaultProcess) ... skipped 'broken since r39918'
test_transition_line_edit (testBPMEvaluation.TestOrderDefaultProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add (testBPMEvaluation.TestOrderDefaultProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_many_transactions (testBPMEvaluation.TestOrderDefaultProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_same_resource (testBPMEvaluation.TestOrderDefaultProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_same_resource_edit_again (testBPMEvaluation.TestOrderDefaultProcess) ... skipped 'broken since r39918'
test_transition_split (testBPMEvaluation.TestOrderDefaultProcess) ... skipped 'broken since r39918'
test_transition_split_line_add (testBPMEvaluation.TestOrderDefaultProcess) ... skipped 'broken since r39918'
test_transition_split_line_add_split (testBPMEvaluation.TestOrderDefaultProcess) ... skipped 'broken since r39918'
test_starting (testBPMEvaluation.TestPackingListDefaultProcess) ... skipped 'broken since r39918'
test_transition (testBPMEvaluation.TestPackingListDefaultProcess) ... skipped 'broken since r39918'
test_transition_line_edit (testBPMEvaluation.TestPackingListDefaultProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add (testBPMEvaluation.TestPackingListDefaultProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_many_transactions (testBPMEvaluation.TestPackingListDefaultProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_same_resource (testBPMEvaluation.TestPackingListDefaultProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_same_resource_edit_again (testBPMEvaluation.TestPackingListDefaultProcess) ... skipped 'broken since r39918'
test_transition_split (testBPMEvaluation.TestPackingListDefaultProcess) ... skipped 'broken since r39918'
test_transition_split_line_add (testBPMEvaluation.TestPackingListDefaultProcess) ... skipped 'broken since r39918'
test_transition_split_line_add_split (testBPMEvaluation.TestPackingListDefaultProcess) ... skipped 'broken since r39918'
test_confirming (testBPMEvaluation.TestOrderDifferentProcess) ... skipped 'broken since r39918'
test_transition (testBPMEvaluation.TestOrderDifferentProcess) ... skipped 'broken since r39918'
test_transition_line_edit (testBPMEvaluation.TestOrderDifferentProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add (testBPMEvaluation.TestOrderDifferentProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_many_transactions (testBPMEvaluation.TestOrderDifferentProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_same_resource (testBPMEvaluation.TestOrderDifferentProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_same_resource_edit_again (testBPMEvaluation.TestOrderDifferentProcess) ... skipped 'broken since r39918'
test_transition_split (testBPMEvaluation.TestOrderDifferentProcess) ... skipped 'broken since r39918'
test_transition_split_line_add (testBPMEvaluation.TestOrderDifferentProcess) ... skipped 'broken since r39918'
test_transition_split_line_add_split (testBPMEvaluation.TestOrderDifferentProcess) ... skipped 'broken since r39918'
test_starting (testBPMEvaluation.TestPackingListDifferentProcess) ... skipped 'broken since r39918'
test_transition (testBPMEvaluation.TestPackingListDifferentProcess) ... skipped 'broken since r39918'
test_transition_line_edit (testBPMEvaluation.TestPackingListDifferentProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add (testBPMEvaluation.TestPackingListDifferentProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_many_transactions (testBPMEvaluation.TestPackingListDifferentProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_same_resource (testBPMEvaluation.TestPackingListDifferentProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_same_resource_edit_again (testBPMEvaluation.TestPackingListDifferentProcess) ... skipped 'broken since r39918'
test_transition_split (testBPMEvaluation.TestPackingListDifferentProcess) ... skipped 'broken since r39918'
test_transition_split_line_add (testBPMEvaluation.TestPackingListDifferentProcess) ... skipped 'broken since r39918'
test_transition_split_line_add_split (testBPMEvaluation.TestPackingListDifferentProcess) ... skipped 'broken since r39918'
testBase (3 skips)
test_NonIndexable (testBase.TestBase), check if a document is not indexed where we set isIndexable=0 in the same transaction of newContent(). ... skipped 'isIndexable is not designed to work like tested here, this test must be rewritten once we know how to handle correctly templates'
test_NonIndexable2 (testBase.TestBase), check if a document is not indexed where we call edit() and set isIndexable=0 after it is already indexed. ... skipped 'isIndexable is not designed to work like tested here, this test must be rewritten once we know how to handle correctly templates'
test_NonIndexable3 (testBase.TestBase), check if a document is not indexed where we set isIndexable=0 and call edit() after it is already indexed. ... skipped 'isIndexable is not designed to work like tested here, this test must be rewritten once we know how to handle correctly templates'
testBusinessTemplate (2 skips)
testCRM (1 skips)
testConversionInSimulation (4 skips)
testDivergenceTester (5 skips)
testDms (3 skips)
testDmsWithFlare (3 skips)
testDynamicClassGeneration (17 skips)
testAddAcquiredPropertyToZodbPropertySheet (testDynamicClassGeneration.TestZodbPropertySheet) ... skipped 'ZODB Property Sheets code is not enabled yet'
testAddCategoryPropertyToZodbPropertySheet (testDynamicClassGeneration.TestZodbPropertySheet) ... skipped 'ZODB Property Sheets code is not enabled yet'
testAddDynamicCategoryPropertyToZodbPropertySheet (testDynamicClassGeneration.TestZodbPropertySheet) ... skipped 'ZODB Property Sheets code is not enabled yet'
testAddStandardPropertyToZodbPropertySheet (testDynamicClassGeneration.TestZodbPropertySheet) ... skipped 'ZODB Property Sheets code is not enabled yet'
testAssignUnassignZodbPropertySheet (testDynamicClassGeneration.TestZodbPropertySheet) ... skipped 'ZODB Property Sheets code is not enabled yet'
testCategoryExistenceConstraint (testDynamicClassGeneration.TestZodbPropertySheet) ... skipped 'ZODB Property Sheets code is not enabled yet'
testChangeAcquiredPropertyOfZodbPropertySheet (testDynamicClassGeneration.TestZodbPropertySheet) ... skipped 'ZODB Property Sheets code is not enabled yet'
testChangeCategoryPropertyOfZodbPropertySheet (testDynamicClassGeneration.TestZodbPropertySheet) ... skipped 'ZODB Property Sheets code is not enabled yet'
testChangeDynamicCategoryPropertyOfZodbPropertySheet (testDynamicClassGeneration.TestZodbPropertySheet) ... skipped 'ZODB Property Sheets code is not enabled yet'
testChangeStandardPropertyOfZodbPropertySheet (testDynamicClassGeneration.TestZodbPropertySheet) ... skipped 'ZODB Property Sheets code is not enabled yet'
testDeleteAcquiredPropertyFromZodbPropertySheet (testDynamicClassGeneration.TestZodbPropertySheet) ... skipped 'ZODB Property Sheets code is not enabled yet'
testDeleteCategoryPropertyFromZodbPropertySheet (testDynamicClassGeneration.TestZodbPropertySheet) ... skipped 'ZODB Property Sheets code is not enabled yet'
testDeleteDynamicCategoryPropertyFromZodbPropertySheet (testDynamicClassGeneration.TestZodbPropertySheet) ... skipped 'ZODB Property Sheets code is not enabled yet'
testDeleteStandardPropertyFromZodbPropertySheet (testDynamicClassGeneration.TestZodbPropertySheet) ... skipped 'ZODB Property Sheets code is not enabled yet'
testPropertyExistenceConstraint (testDynamicClassGeneration.TestZodbPropertySheet) ... skipped 'ZODB Property Sheets code is not enabled yet'
testERP5Base (1 skips)
testERP5Catalog (4 skips)
test_49_IndexInOrderedSearchFolder (testERP5Catalog.TestERP5Catalog) ... skipped 'TODO ERP5'
test_SubDocumentsWithAcquireLocalRoleSecurityIndexing (testERP5Catalog.TestERP5Catalog) ... skipped 'TODO ERP5'
test_sortOnRelatedKeyWithUnsetRelation (testERP5Catalog.TestERP5Catalog) ... skipped 'TODO ERP5'
testERP5Commerce (3 skips)
testERP5Discussion (1 skips)
testERP5Interfaces (13 skips)
testERP5Type (1 skips)
testERP5TypeInterfaces (1 skips)
testERP5Web (2 skips)
testFormPrintoutAsODT (1 skips)
test_09_FieldReplacementWithValidation (testFormPrintoutAsODT.TestFormPrintoutAsODT) ... skipped 'Disable validation because OOo does not produce compliant xml, and RelaxNG status is still draft'
testInventoryAPI (2 skips)
testInvoice (7 skips)
testItem (13 skips)
testLegacyMRP (4 skips)
test_TransformationRule_expand_concurrent (Products.ERP5.tests.testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationRule_expand_reexpand (Products.ERP5.tests.testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationRule_getHeadProductionPathList (Products.ERP5.tests.testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationSourcingRule_expand (Products.ERP5.tests.testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
testLegacySimulationInventoryAPI (2 skips)
testLegacyTask (1 skips)
testMRP (5 skips)
test_TransformationRule_expand_concurrent (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationRule_expand_reexpand (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationRule_getHeadProductionPathList (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationSourcingRule_expand (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
testPackingList (16 skips)
testPackingListRoundingPrecision (8 skips)
testProxyField (1 skips)
testSQLCachedWorklist (1 skips)
test_02_related_key (testSQLCachedWorklist.TestSQLCachedWorklist) ... skipped 'TODO ERP5'
testSelectionTool (7 skips)
skipped 'Test to be written'
testPage (testSelectionTool.TestSelectionTool) ... skipped 'Test to be written'
testView (testSelectionTool.TestSelectionTool) ... skipped 'Test to be written'
skipped 'Test to be written'
testDeleteGlobalSelection (testSelectionTool.TestSelectionToolMemcachedStorage) ... skipped 'To be decided if implementation is required'
testPage (testSelectionTool.TestSelectionToolMemcachedStorage) ... skipped 'Test to be written'
testView (testSelectionTool.TestSelectionToolMemcachedStorage) ... skipped 'Test to be written'
testTaskReportDivergence (4 skips)
testTemplate (1 skips)
testWebDavSupport (1 skips)
-------------- next part --------------
ERROR: test_02_UpdateInvoiceTransactionRuleMatrix (testAccountingRules.TestSaleAccountingRules), test edition of matrix and rule.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1678, in test_02_UpdateInvoiceTransactionRuleMatrix
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
Tic
CheckAddPredicate
Tic
CheckRemovePredicate
Tic
CheckRestoreOriginalPredicates
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_03_invoiceTransactionRule_getMatchingCell (testAccountingRules.TestSaleAccountingRules), test predicates for the cells of invoice transaction rule
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1703, in test_03_invoiceTransactionRule_getMatchingCell
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
Tic
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateProducts
Tic
CreateDummyInvoice
CreateMatchableInvoiceMovements
CheckMatchableInvoiceMovements
CreateNotMatchableInvoiceMovements
CheckNotMatchableInvoiceMovements
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_04_SimpleInvoice (testAccountingRules.TestSaleAccountingRules), Simple Invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1734, in test_04_SimpleInvoice
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
PlanInvoice
Tic
CheckFirstRuleIsApplied
CheckPaymentRuleIsApplied
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCoherantWithSimulation
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_04b_SimpleInvoiceConfirm (testAccountingRules.TestSaleAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1773, in test_04b_SimpleInvoiceConfirm
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 lines.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1810, in test_04c_SimpleInvoiceTwoLines
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoiceTwoLines
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_04d_SimpleInvoiceTwoCells (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 cells.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1847, in test_04d_SimpleInvoiceTwoCells
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoiceTwoCells
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestSaleAccountingRules), Add a new line then updateAppliedRule.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1887, in test_05a_SimpleInvoiceReExpandAddLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateEmptyInvoice
PlanInvoice
Tic
AddInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestSaleAccountingRules), Tests that editing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1925, in test_05b_SimpleInvoiceReExpandEditLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateOtherSimpleInvoice
PlanInvoice
Tic
EditInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestSaleAccountingRules), Tests that removing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1963, in test_05c_SimpleInvoiceReExpandDeleteLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
AddInvoiceLine
PlanInvoice
Tic
DeleteInvoiceLine
Tic
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_05d_SimpleInvoiceReExpandCreateCell (testAccountingRules.TestSaleAccountingRules), Tests that replacing a line by cells updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2003, in test_05d_SimpleInvoiceReExpandCreateCell
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateOtherSimpleInvoice
PlanInvoice
Tic
AddCellsInInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestSaleAccountingRules), Tests that updating an applied rule many times doesn't break the
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2072, in test_05e_SimpleInvoiceExpandManyTimes
""", quiet=quiet )
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
PlanInvoice
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_06_MultiLineInvoice (testAccountingRules.TestSaleAccountingRules), Multiple lines invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2086, in test_06_MultiLineInvoice
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
Tic
CreateNotebookFranceCell
CreateBareboneFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateMultiLineInvoice
PlanInvoice
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForMultiLineInvoice
CheckPaymentLinesCreatedForMultiLineInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_planning_invoice_creates_simulation (testAccountingRules.TestSaleAccountingRules)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2125, in test_planning_invoice_creates_simulation
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
Tic
CreateNotebookFranceCell
CreateBareboneFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
Tic
PlanInvoice
Tic
CheckInvoiceSimulation
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_02_UpdateInvoiceTransactionRuleMatrix (testAccountingRules.TestPurchaseAccountingRules), test edition of matrix and rule.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1678, in test_02_UpdateInvoiceTransactionRuleMatrix
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
Tic
CheckAddPredicate
Tic
CheckRemovePredicate
Tic
CheckRestoreOriginalPredicates
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_03_invoiceTransactionRule_getMatchingCell (testAccountingRules.TestPurchaseAccountingRules), test predicates for the cells of invoice transaction rule
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1703, in test_03_invoiceTransactionRule_getMatchingCell
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
Tic
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateProducts
Tic
CreateDummyInvoice
CreateMatchableInvoiceMovements
CheckMatchableInvoiceMovements
CreateNotMatchableInvoiceMovements
CheckNotMatchableInvoiceMovements
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_04_SimpleInvoice (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1734, in test_04_SimpleInvoice
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
PlanInvoice
Tic
CheckFirstRuleIsApplied
CheckPaymentRuleIsApplied
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCoherantWithSimulation
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_04b_SimpleInvoiceConfirm (testAccountingRules.TestPurchaseAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1773, in test_04b_SimpleInvoiceConfirm
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 lines.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1810, in test_04c_SimpleInvoiceTwoLines
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoiceTwoLines
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_04d_SimpleInvoiceTwoCells (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 cells.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1847, in test_04d_SimpleInvoiceTwoCells
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoiceTwoCells
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestPurchaseAccountingRules), Add a new line then updateAppliedRule.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1887, in test_05a_SimpleInvoiceReExpandAddLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateEmptyInvoice
PlanInvoice
Tic
AddInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestPurchaseAccountingRules), Tests that editing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1925, in test_05b_SimpleInvoiceReExpandEditLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateOtherSimpleInvoice
PlanInvoice
Tic
EditInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestPurchaseAccountingRules), Tests that removing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1963, in test_05c_SimpleInvoiceReExpandDeleteLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
AddInvoiceLine
PlanInvoice
Tic
DeleteInvoiceLine
Tic
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_05d_SimpleInvoiceReExpandCreateCell (testAccountingRules.TestPurchaseAccountingRules), Tests that replacing a line by cells updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2003, in test_05d_SimpleInvoiceReExpandCreateCell
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateOtherSimpleInvoice
PlanInvoice
Tic
AddCellsInInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestPurchaseAccountingRules), Tests that updating an applied rule many times doesn't break the
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2072, in test_05e_SimpleInvoiceExpandManyTimes
""", quiet=quiet )
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
PlanInvoice
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_06_MultiLineInvoice (testAccountingRules.TestPurchaseAccountingRules), Multiple lines invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2086, in test_06_MultiLineInvoice
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
Tic
CreateNotebookFranceCell
CreateBareboneFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateMultiLineInvoice
PlanInvoice
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForMultiLineInvoice
CheckPaymentLinesCreatedForMultiLineInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_planning_invoice_creates_simulation (testAccountingRules.TestPurchaseAccountingRules)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2125, in test_planning_invoice_creates_simulation
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 117, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
Tic
CreateNotebookFranceCell
CreateBareboneFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
Tic
PlanInvoice
Tic
CheckInvoiceSimulation
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 201, in stepCreateInvoiceTransactionRule
'default_invoice_transaction_simulation_rule')
AttributeError: default_invoice_transaction_simulation_rule
ERROR: test_19_ManualInvocation (testAlarm.TestAlarm)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAlarm.py", line 641, in test_19_ManualInvocation
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_7e756eb972f79d46577096e1f775b137/portal_alarms/18', 'notify', -2, 5)]
Last error message:
AttributeError
Document_checkConversionFormatPermission
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Alarm, line 329, in notify
Module Products.ERP5.Tool.NotificationTool, line 358, in sendMessage
Module Products.ERP5.Document.Event, line 170, in send
Module Products.ERP5.Document.EmailDocument, line 630, in send
Module Products.ERP5.mixin.text_convertable, line 49, in asText
Module Products.ERP5.mixin.document, line 69, in convert
Module Products.ERP5.mixin.document, line 105, in _checkConversionFormatPermission
Module Products.ERP5Type.Base, line 3125, in _getTypeBasedMethod
AttributeError: Document_checkConversionFormatPermission
ERROR: test_checkCopyComposition (testApparelModel.TestApparelModel)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testApparelModel.py", line 97, in test_checkCopyComposition
acrylique.setQuantity(0.88)
AttributeError: setQuantity
FAIL: test_Archive (testArchive.TestArchive)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Catalog/tests/testArchive.py", line 271, in test_Archive
self.checkRelativeUrlInSQLPathList(path_list, connection_id=self.archive_connection_id)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Catalog/tests/testArchive.py", line 110, in checkRelativeUrlInSQLPathList
self.failUnless(path in path_list)
AssertionError
FAIL: test_isBuildable_OrderedDeliveredInvoiced (testBPMCore.TestBPMisBuildableImplementation), Test isBuildable for ordered, delivered and invoiced sequence
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testBPMCore.py", line 703, in test_isBuildable_OrderedDeliveredInvoiced
self.assertEquals(self.invoice_path.isBuildable(order), False)
AssertionError: True != False
FAIL: test_isBuildable_OrderedInvoicedDelivered (testBPMCore.TestBPMisBuildableImplementation), Test isBuildable for ordered, invoiced and delivered sequence
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testBPMCore.py", line 802, in test_isBuildable_OrderedInvoicedDelivered
self.assertEquals(self.delivery_path.isBuildable(order), False)
AssertionError: True != False
FAIL: test_isFrozen_OrderedDeliveredInvoiced (testBPMCore.TestBPMisFrozenImplementation), Test isFrozen for ordered, delivered and invoiced sequence
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testBPMCore.py", line 1147, in test_isFrozen_OrderedDeliveredInvoiced
self.assertEqual(self.invoice_path.isFrozen(order), False)
AssertionError: True != False
FAIL: test_isFrozen_OrderedInvoicedDelivered (testBPMCore.TestBPMisFrozenImplementation), Test isFrozen for ordered, invoiced and invoiced sequence
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testBPMCore.py", line 1226, in test_isFrozen_OrderedInvoicedDelivered
self.assertEqual(self.invoice_path.isFrozen(order), False)
AssertionError: True != False
FAIL: test_AsDocumentationHelperOnClassTool (testClassTool.TestClassTool)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/Products/ERP5Type/tests/testClassTool.py", line 102, in test_AsDocumentationHelperOnClassTool
self.assertNotEquals([], class_doc_helper.getStaticPropertyList())
AssertionError: [] == []
FAIL: test_AsDocumentationHelperOnDocument (testClassTool.TestClassTool)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/Products/ERP5Type/tests/testClassTool.py", line 91, in test_AsDocumentationHelperOnDocument
self.failUnless('Base' in doc_helper.getInheritanceList())
AssertionError
ERROR: test_02_AdoptingPrevision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testDeliveryBuilderToSupportMultipleLines.py", line 267, in test_02_AdoptingPrevision
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
UpdateBuilderForMultipleLineList
SetPythonScriptForDeliveryBuilder
StartPackingList
CheckInvoicingRule
Tic
GetRelatedInvoiceFromPackingList
UpdatePackingList
Tic
> AcceptDecisionPackingListQuantity
Tic
CheckInvoiceIsDivergent
CheckInvoiceIsDiverged
AdoptPrevisionInvoiceQuantity
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testDeliveryBuilderToSupportMultipleLines.py", line 209, in stepAcceptDecisionPackingListQuantity
self._solveDivergence(document, 'quantity', 'accept')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPackingList.py", line 702, in _solveDivergence
solver_decision.setSolverValue(self.portal.portal_solvers[solver])
File "/usr/lib/erp5/lib/python/OFS/ObjectManager.py", line 715, in __getitem__
raise KeyError, key
KeyError: 'accept'
ERROR: test_03_AcceptingDecision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testDeliveryBuilderToSupportMultipleLines.py", line 304, in test_03_AcceptingDecision
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
UpdateBuilderForMultipleLineList
SetPythonScriptForDeliveryBuilder
StartPackingList
CheckInvoicingRule
Tic
GetRelatedInvoiceFromPackingList
UpdateInvoice
Tic
CheckInvoiceIsDivergent
> AcceptDecisionInvoiceQuantity
Tic
CheckInvoiceIsNotDivergent
CheckPackingListIsDivergent
AdoptPrevisionPackingListQuantity
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testDeliveryBuilderToSupportMultipleLines.py", line 217, in stepAcceptDecisionInvoiceQuantity
self._solveDivergence(document, 'quantity', 'accept')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPackingList.py", line 702, in _solveDivergence
solver_decision.setSolverValue(self.portal.portal_solvers[solver])
File "/usr/lib/erp5/lib/python/OFS/ObjectManager.py", line 715, in __getitem__
raise KeyError, key
KeyError: 'accept'
ERROR: test_04_MergingMultipleSaleOrders (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testDeliveryBuilderToSupportMultipleLines.py", line 361, in test_04_MergingMultipleSaleOrders
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
UpdateBuilderForMultipleLineList
SetPythonScriptForDeliveryBuilder
StartPackingList
CheckInvoicingRule
Tic
GetRelatedInvoiceFromPackingList
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
Tic
CreateOrderLine
SetOrderLineResource
UpdateOrder
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetFillContainerLine
Tic
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceIsDivergent
> AdoptPrevisionInvoiceQuantity
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testDeliveryBuilderToSupportMultipleLines.py", line 213, in stepAdoptPrevisionInvoiceQuantity
self._solveDivergence(document, 'quantity', 'adopt')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPackingList.py", line 702, in _solveDivergence
solver_decision.setSolverValue(self.portal.portal_solvers[solver])
File "/usr/lib/erp5/lib/python/OFS/ObjectManager.py", line 715, in __getitem__
raise KeyError, key
KeyError: 'adopt'
FAIL: test_Member_download_pdf_format (testDmsWithFlare.TestDocumentWithFlare)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 635, in test_Member_download_pdf_format
self.assertEquals(response_body, conversion, diff)
AssertionError:
--- first_call.pdf
+++ second_call.pdf
@@ -269,8 +269,8 @@
trailer
<</Size 22/Root 20 0 R
/Info 21 0 R
-/ID [ <191623CA4773F5F03E55F6296C26CB1D>
-<191623CA4773F5F03E55F6296C26CB1D> ]
+/ID [ <FCAAEF1ABA74D9329F7447FF71D1CC1B>
+<FCAAEF1ABA74D9329F7447FF71D1CC1B> ]
/DocChecksum /438E0A436A4B83320F4F57C14C1F7315
>>
startxref
FAIL: test_parallel_conversion (testDmsWithFlare.TestDocumentWithFlare), Check that conversion engine is able to fill in
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1729, in test_parallel_conversion
self.assertEquals(result_list, [])
AssertionError: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41] != []
ERROR: test_02_BusinessTemplate (testDocumentationHelper.TestDocumentationHelper), Documentation of Business Template
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/Products/ERP5Type/tests/testDocumentationHelper.py", line 90, in test_02_BusinessTemplate
self.portal.portal_classes.DocumentationHelper_viewReport()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Form/Form.py", line 649, in __call__
return pt.pt_render(extra_context=extra_context)
File "/usr/lib/erp5/lib/python/Products/PageTemplates/PageTemplate.py", line 104, in pt_render
tal=not source, strictinsert=0)()
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 206, in __call__
self.interpret(self.program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 711, in do_useMacro
self.interpret(macro)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 711, in do_useMacro
self.interpret(macro)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 711, in do_useMacro
self.interpret(macro)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 742, in do_defineSlot
self.interpret(block)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 734, in do_defineSlot
self.interpret(slot)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 734, in do_defineSlot
self.interpret(slot)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 734, in do_defineSlot
self.interpret(slot)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 677, in do_condition
self.interpret(block)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 653, in do_loop_tal
self.interpret(block)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 477, in do_setLocal_tal
self.engine.setLocal(name, self.engine.evaluateValue(expr))
File "/usr/lib/erp5/lib/python/Products/PageTemplates/TALES.py", line 221, in evaluate
return expression(self)
File "/usr/lib/erp5/lib/python/Products/PageTemplates/ZRPythonExpr.py", line 47, in __call__
return eval(code, g, {})
File "Python expression "report_item_list.extend(reportbox.render())"", line 1, in <expression>
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/Formulator/Field.py", line 269, in render
editable=editable,
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/Formulator/Field.py", line 205, in _render_helper
render_prefix=render_prefix)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Form/ProxyField.py", line 82, in __call__
return proxied_method(field, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Form/ReportBox.py", line 58, in render_view
return self.render(field, key, value, REQUEST)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Form/ReportBox.py", line 71, in render
return report_method()
File "/usr/lib/erp5/lib/python/Shared/DC/Scripts/Bindings.py", line 311, in __call__
return self._bindAndExec(args, kw, None)
File "/usr/lib/erp5/lib/python/Shared/DC/Scripts/Bindings.py", line 348, in _bindAndExec
return self._exec(bound_data, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1283, in _exec
return PythonScript_exec(self, *args)
File "/usr/lib/erp5/lib/python/Products/PythonScripts/PythonScript.py", line 325, in _exec
result = f(*args, **kw)
File "Script (Python)", line 98, in DocumentationHelper_getDocumentationSectionList
File "/usr/lib/erp5/lib/python/Shared/DC/Scripts/Bindings.py", line 311, in __call__
return self._bindAndExec(args, kw, None)
File "/usr/lib/erp5/lib/python/Shared/DC/Scripts/Bindings.py", line 348, in _bindAndExec
return self._exec(bound_data, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1283, in _exec
return PythonScript_exec(self, *args)
File "/usr/lib/erp5/lib/python/Products/PythonScripts/PythonScript.py", line 325, in _exec
result = f(*args, **kw)
File "Script (Python)", line 35, in DocumentationHelper_getDocumentationSectionListParams
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/DocumentationHelper/AccessorMethodDocumentationHelper.py", line 53, in getDescription
obj = self.getDocumentedObject()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/DocumentationHelper/DocumentationHelper.py", line 215, in getDocumentedObject
raise NotImplementedError
NotImplementedError
ERROR: test_03_PortalType (testDocumentationHelper.TestDocumentationHelper), Documentation of Portal Type
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/Products/ERP5Type/tests/testDocumentationHelper.py", line 123, in test_03_PortalType
self.portal.portal_classes.DocumentationHelper_viewReport()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Form/Form.py", line 649, in __call__
return pt.pt_render(extra_context=extra_context)
File "/usr/lib/erp5/lib/python/Products/PageTemplates/PageTemplate.py", line 104, in pt_render
tal=not source, strictinsert=0)()
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 206, in __call__
self.interpret(self.program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 711, in do_useMacro
self.interpret(macro)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 711, in do_useMacro
self.interpret(macro)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 711, in do_useMacro
self.interpret(macro)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 742, in do_defineSlot
self.interpret(block)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 734, in do_defineSlot
self.interpret(slot)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 734, in do_defineSlot
self.interpret(slot)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 734, in do_defineSlot
self.interpret(slot)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 677, in do_condition
self.interpret(block)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 653, in do_loop_tal
self.interpret(block)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 477, in do_setLocal_tal
self.engine.setLocal(name, self.engine.evaluateValue(expr))
File "/usr/lib/erp5/lib/python/Products/PageTemplates/TALES.py", line 221, in evaluate
return expression(self)
File "/usr/lib/erp5/lib/python/Products/PageTemplates/ZRPythonExpr.py", line 47, in __call__
return eval(code, g, {})
File "Python expression "report_item_list.extend(reportbox.render())"", line 1, in <expression>
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/Formulator/Field.py", line 269, in render
editable=editable,
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/Formulator/Field.py", line 205, in _render_helper
render_prefix=render_prefix)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Form/ProxyField.py", line 82, in __call__
return proxied_method(field, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Form/ReportBox.py", line 58, in render_view
return self.render(field, key, value, REQUEST)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Form/ReportBox.py", line 71, in render
return report_method()
File "/usr/lib/erp5/lib/python/Shared/DC/Scripts/Bindings.py", line 311, in __call__
return self._bindAndExec(args, kw, None)
File "/usr/lib/erp5/lib/python/Shared/DC/Scripts/Bindings.py", line 348, in _bindAndExec
return self._exec(bound_data, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1283, in _exec
return PythonScript_exec(self, *args)
File "/usr/lib/erp5/lib/python/Products/PythonScripts/PythonScript.py", line 325, in _exec
result = f(*args, **kw)
File "Script (Python)", line 78, in DocumentationHelper_getDocumentationSectionList
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/DocumentationHelper/AccessorMethodDocumentationHelper.py", line 53, in getDescription
obj = self.getDocumentedObject()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/DocumentationHelper/DocumentationHelper.py", line 215, in getDocumentedObject
raise NotImplementedError
NotImplementedError
ERROR: testZodbImportPropertySheet (testDynamicClassGeneration.TestZodbImportFilesystemPropertySheet)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/Products/ERP5Type/tests/testDynamicClassGeneration.py", line 947, in testZodbImportPropertySheet
zodb_property_sheet = portal.createPropertySheetFromFilesystemClass(
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/Tool/PropertySheetTool.py", line 98, in createPropertySheetFromFilesystemClass
new_property.importFromFilesystemDefinition(attribute_dict)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/Core/StandardProperty.py", line 165, in importFromFilesystemDefinition
self.edit(**self._convertFromFilesytemPropertyDict(filesystem_property_dict))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/Base.py", line 206, in __call__
return apply(self.__dict__['_m'], (instance,) + args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/Base.py", line 1697, in edit
reindex_object=reindex_object, restricted=1, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/Base.py", line 1664, in _edit
unmodified_key_list = setChangedPropertyList(unordered_key_list)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/Base.py", line 1632, in setChangedPropertyList
old_value = getProperty(key)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/Base.py", line 1342, in getProperty
return method(**kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/Core/StandardProperty.py", line 82, in getElementaryType
raise AttributeError("%s: Could not get elementary_type" % self)
AttributeError: <Standard Property at 1>: Could not get elementary_type
ERROR: test_Products.ERP5Type.Document.BusinessLink_BusinessLink_implements_IArrowBase (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 67, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass Products.ERP5.interfaces.arrow_base.IArrowBase>
ERROR: test_02_renderTask (testICal.TestICal)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testICal.py", line 207, in test_02_renderTask
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_cefb9b8a3a89a3f683f25c51b36c5dc6/task_module/one', 'Delivery_updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Shared.DC.Scripts.Bindings, line 311, in __call__
Module Shared.DC.Scripts.Bindings, line 348, in _bindAndExec
Module Products.ERP5Type.tests.ERP5TypeTestCase, line 1283, in _exec
Module Products.PythonScripts.PythonScript, line 325, in _exec
Module None, line 45, in Delivery_updateAppliedRule
- <PythonScript at /erp5_portal_cefb9b8a3a89a3f683f25c51b36c5dc6/Delivery_updateAppliedRule used for /erp5_portal_cefb9b8a3a89a3f683f25c51b36c5dc6/task_module/one>
- Line 45
Module AccessControl.ZopeGuards, line 339, in guarded_apply
Module AccessControl.ZopeGuards, line 361, in builtin_guarded_apply
Module Products.ERP5.Document.Order, line 204, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 734, in updateAppliedRule
ValueError: No such rule as 'default_order_rule' is found
FAIL: test_19_TestAccountingBuildingAndDivergence (testImmobilisation.TestImmobilisation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testImmobilisation.py", line 3685, in test_19_TestAccountingBuildingAndDivergence
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
SetTest19SequenceData
DeleteAccounting
Tic
DeleteAllPackingLists
Tic
TestAllAppliedRulesAreEmpty
CreatePackingList
DeliverPackingList
AggregateItems
Tic
BuildAccounting
Tic
TestSimpleAccountingBuild
SetTest19SequenceData2
CreatePackingList
DeliverPackingList
AggregateItems
Tic
TestSimulationBuildAfterFirstAccountingChange
BuildAccounting
Tic
> TestAccountingBuildAfterFirstChange
DeletePackingList
Tic
TestSimulationBuildAfterSecondAccountingChange
BuildAccounting
Tic
TestAccountingBuildAfterSecondChange
AdoptPrevision
Tic
TestAccountingBuildAfterAdoptPrevision
Test19ModifyPackingList
Tic
TestSimulationBuildAfterPackingListModification
BuildAccounting
Tic
TestAccountingBuildAfterPackingListModification
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testImmobilisation.py", line 2518, in stepTestAccountingBuildAfterFirstChange
self._testAccountingBuild(c_transaction_list, e_transaction_list)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testImmobilisation.py", line 2985, in _testAccountingBuild
self.failUnless(e_found_transaction is not None)
AssertionError
FAIL: test_20_TestAccountingAcceptDecisionSolver (testImmobilisation.TestImmobilisation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testImmobilisation.py", line 3761, in test_20_TestAccountingAcceptDecisionSolver
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
SetTest20SequenceData
DeleteAccounting
Tic
DeleteAllPackingLists
Tic
TestAllAppliedRulesAreEmpty
CreatePackingList
DeliverPackingList
AggregateItems
Tic
BuildAccounting
Tic
ConfirmAmortisationTransaction
Tic
TestSimpleAccountingBuild
ChangeAccountingPrice
Tic
AcceptDecision
Tic
> TestSimulationBuildAfterAcceptDecision
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testImmobilisation.py", line 2741, in stepTestSimulationBuildAfterAcceptDecision
self._testSimulationBuild(c_simulation_movement_list, e_simulation_movement_list)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testImmobilisation.py", line 2139, in _testSimulationBuild
self.fail('No expected movement found for\
AssertionError: No expected movement found for portal_simulation/26/start_input_0_0
None
None
0.0
10000.0
currency_module/EUR
account_module/account1
organisation_module/A
2000/01/01
2000/01/01
[{'destination': None,
'destination_section_value': None,
'id': 1,
'profit_quantity': -5000,
'quantity': 10000,
'resource': 'currency_module/EUR',
'source': 'account_module/account1',
'source_section_value': <Organisation at /erp5_portal_e7f9f35f6c4e0cf67451038fbfe15b0b/organisation_module/A>,
'start_date': DateTime('2000/01/01'),
'stop_date': DateTime('2000/01/01')}]
FAIL: testCommitOrder (testInvalidationBug.TestInvalidationBug), Check order of resources being committed
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvalidationBug.py", line 93, in testCommitOrder
self.assertEqual(result_list[-2], [1,0]) # catalog
AssertionError: [1, 1] != [1, 0]
FAIL: testLateInvalidationFromZEO (testInvalidationBug.TestInvalidationBug)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvalidationBug.py", line 137, in testLateInvalidationFromZEO
self.assertNoPendingMessage()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 130, in assertNoPendingMessage
self.fail(error_message)
AssertionError: These messages are pending: [('/erp5_portal_dbc865b0f58a63ce83de451b148c0de2/organisation_module/1', 'immediateReindexObject', -1, 0)]
FAIL: test_isBuildable_OrderedDeliveredInvoiced (testLegacyBPMCore.TestBPMisBuildableImplementation), Test isBuildable for ordered, delivered and invoiced sequence
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Legacy/tests/testLegacyBPMCore.py", line 748, in test_isBuildable_OrderedDeliveredInvoiced
self.assertEquals(invoicing_simulation_movement.isBuildable(), False)
AssertionError: True != False
FAIL: test_isBuildable_OrderedInvoicedDelivered (testLegacyBPMCore.TestBPMisBuildableImplementation), Test isBuildable for ordered, invoiced and delivered sequence
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Legacy/tests/testLegacyBPMCore.py", line 847, in test_isBuildable_OrderedInvoicedDelivered
self.assertEquals(delivery_simulation_movement.isBuildable(), False)
AssertionError: True != False
FAIL: test_isFrozen_OrderedDeliveredInvoiced (testLegacyBPMCore.TestBPMisFrozenImplementation), Test isFrozen for ordered, delivered and invoiced sequence
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Legacy/tests/testLegacyBPMCore.py", line 1232, in test_isFrozen_OrderedDeliveredInvoiced
self.assertEqual(delivery_simulation_movement.isFrozen(), True)
AssertionError: False != True
FAIL: test_isFrozen_OrderedInvoicedDelivered (testLegacyBPMCore.TestBPMisFrozenImplementation), Test isFrozen for ordered, invoiced and invoiced sequence
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Legacy/tests/testLegacyBPMCore.py", line 1298, in test_isFrozen_OrderedInvoicedDelivered
self.assertEqual(self.invoice_path.isFrozen(order), True)
AssertionError: False != True
FAIL: test_01c_PackingListSplitBuildInvoiceBuild (Products.ERP5.tests.testTradeModelLine.TestTradeModelLineSale)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 680, in test_01c_PackingListSplitBuildInvoiceBuild
self.processPackingListBuildInvoice(packing_list)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 330, in processPackingListBuildInvoice
self.checkCausalityState(invoice, 'solved')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 417, in checkCausalityState
delivery.getDivergenceList())
AssertionError: [<DivergenceMessage object at 0x639c050
'decision_value': -0.049999999999999989
'divergence_scope': 'property'
'prevision_value': -0.050000000000000003
'mapping': {}
'object_relative_url': 'accounting_module/3/5'
'simulation_movement': <Simulation Movement at /erp5_portal_0393a62e4371b0e9e8e3707f047ac555/portal_simulation/5/3/1/1/1/1/2/3>
'tested_property': 'price'
'message': 'Price'>, <DivergenceMessage object at 0x5ae3488
'decision_value': -0.049999999999999989
'divergence_scope': 'property'
'prevision_value': -0.050000000000000003
'mapping': {}
'object_relative_url': 'accounting_module/3/5'
'simulation_movement': <Simulation Movement at /erp5_portal_0393a62e4371b0e9e8e3707f047ac555/portal_simulation/5/1/1/1/1/1/2/3>
'tested_property': 'price'
'message': 'Price'>]
FAIL: test_tradeModelLineWithRounding (Products.ERP5.tests.testTradeModelLine.TestTradeModelLineSale)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 1096, in test_tradeModelLineWithRounding
self.assertEqual(2, len(amount_list)) # XXX 1 or 2 ???
AssertionError: 2 != 1
FAIL: test_01c_PackingListSplitBuildInvoiceBuild (Products.ERP5.tests.testTradeModelLinePurchase.TestTradeModelLinePurchase)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 680, in test_01c_PackingListSplitBuildInvoiceBuild
self.processPackingListBuildInvoice(packing_list)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 330, in processPackingListBuildInvoice
self.checkCausalityState(invoice, 'solved')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 417, in checkCausalityState
delivery.getDivergenceList())
AssertionError: [<DivergenceMessage object at 0xbda25f0
'decision_value': -0.049999999999999989
'divergence_scope': 'property'
'prevision_value': -0.050000000000000003
'mapping': {}
'object_relative_url': 'accounting_module/3/5'
'simulation_movement': <Simulation Movement at /erp5_portal_d08328230494c3b46faa6f7449e56966/portal_simulation/5/3/1/1/1/1/2/3>
'tested_property': 'price'
'message': 'Price'>, <DivergenceMessage object at 0xbebeb00
'decision_value': -0.049999999999999989
'divergence_scope': 'property'
'prevision_value': -0.050000000000000003
'mapping': {}
'object_relative_url': 'accounting_module/3/5'
'simulation_movement': <Simulation Movement at /erp5_portal_d08328230494c3b46faa6f7449e56966/portal_simulation/5/1/1/1/1/1/2/3>
'tested_property': 'price'
'message': 'Price'>]
FAIL: test_tradeModelLineWithRounding (Products.ERP5.tests.testTradeModelLinePurchase.TestTradeModelLinePurchase)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 1096, in test_tradeModelLineWithRounding
self.assertEqual(2, len(amount_list)) # XXX 1 or 2 ???
AssertionError: 2 != 1
ERROR: testBuildingSaleOrder (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 540, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 54, in afterSetUp
self.portal.portal_rules.default_order_rule.validate()
AttributeError: default_order_rule
ERROR: testOpenOrderRule (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 540, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 54, in afterSetUp
self.portal.portal_rules.default_order_rule.validate()
AttributeError: default_order_rule
ERROR: testPeriodicityDateList (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 540, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 54, in afterSetUp
self.portal.portal_rules.default_order_rule.validate()
AttributeError: default_order_rule
ERROR: testPeriodicityDateListUniversal (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 540, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 54, in afterSetUp
self.portal.portal_rules.default_order_rule.validate()
AttributeError: default_order_rule
FAIL: test_01_simpleOrderBuilder (testOrderBuilder.TestOrderBuilder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 401, in test_01_simpleOrderBuilder
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateOrganisation
CreateNotVariatedResource
SetMaxDelayOnResource
SetMinFlowOnResource
Tic
DecreaseOrganisationResourceQuantity
Tic
CreateOrderBuilder
FillOrderBuilder
Tic
BuildOrderBuilder
Tic
> CheckGeneratedDocumentList
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 221, in stepCheckGeneratedDocumentList
len(generated_document_list)
AssertionError: 1 != 0
FAIL: test_01a_simpleOrderBuilderVariatedResource (testOrderBuilder.TestOrderBuilder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 442, in test_01a_simpleOrderBuilderVariatedResource
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateOrganisation
CreateVariatedResource
SetMaxDelayOnResource
SetMinFlowOnResource
Tic
DecreaseOrganisationResourceQuantityVariated
Tic
CreateOrderBuilder
FillOrderBuilder
Tic
BuildOrderBuilder
Tic
> CheckGeneratedDocumentListVariated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 156, in stepCheckGeneratedDocumentListVariated
len(generated_document_list)
AssertionError: 1 != 0
FAIL: test_02_maxDelayResourceOrderBuilder (testOrderBuilder.TestOrderBuilder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 464, in test_02_maxDelayResourceOrderBuilder
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateOrganisation
CreateNotVariatedResource
SetMaxDelayOnResource
SetMinFlowOnResource
Tic
DecreaseOrganisationResourceQuantity
Tic
CreateOrderBuilder
FillOrderBuilder
Tic
BuildOrderBuilder
Tic
> CheckGeneratedDocumentList
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 221, in stepCheckGeneratedDocumentList
len(generated_document_list)
AssertionError: 1 != 0
FAIL: test_03_minFlowResourceOrderBuilder (testOrderBuilder.TestOrderBuilder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 488, in test_03_minFlowResourceOrderBuilder
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateOrganisation
CreateNotVariatedResource
SetMaxDelayOnResource
SetMinFlowOnResource
Tic
DecreaseOrganisationResourceQuantity
Tic
CreateOrderBuilder
FillOrderBuilder
Tic
BuildOrderBuilder
Tic
> CheckGeneratedDocumentList
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 221, in stepCheckGeneratedDocumentList
len(generated_document_list)
AssertionError: 1 != 0
ERROR: test_AccountingLineGeneration (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 3122, in test_AccountingLineGeneration
self.stepTic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_7b7a3575330a52ab2ff14077272db47e/accounting_module/1', 'expand', -2, 5)]
Last error message:
ValueError
A Business Process can not erase amounts
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 799, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 216, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 159, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 69, in getMovementCollectionDiff
Module Products.ERP5.mixin.rule, line 117, in getGeneratedMovementList
Module Products.ERP5.Document.BusinessProcess, line 728, in getTradePhaseMovementList
ValueError: A Business Process can not erase amounts
ERROR: test_NetSalaryReport (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 2808, in test_NetSalaryReport
self.stepTic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_7b7a3575330a52ab2ff14077272db47e/accounting_module/2', 'expand', -2, 5)]
Last error message:
ValueError
A Business Process can not erase amounts
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 799, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 216, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 159, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 69, in getMovementCollectionDiff
Module Products.ERP5.mixin.rule, line 117, in getGeneratedMovementList
Module Products.ERP5.Document.BusinessProcess, line 728, in getTradePhaseMovementList
ValueError: A Business Process can not erase amounts
ERROR: test_PayrollTaxesReport (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 2413, in test_PayrollTaxesReport
self.stepTic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_7b7a3575330a52ab2ff14077272db47e/accounting_module/5', 'expand', -2, 5)]
Last error message:
ValueError
A Business Process can not erase amounts
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 799, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 216, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 159, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 69, in getMovementCollectionDiff
Module Products.ERP5.mixin.rule, line 117, in getGeneratedMovementList
Module Products.ERP5.Document.BusinessProcess, line 728, in getTradePhaseMovementList
ValueError: A Business Process can not erase amounts
ERROR: test_PayrollTaxesReportDifferentSalaryRange (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 2611, in test_PayrollTaxesReportDifferentSalaryRange
self.stepTic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_7b7a3575330a52ab2ff14077272db47e/accounting_module/7', 'expand', -2, 5)]
Last error message:
ValueError
A Business Process can not erase amounts
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 799, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 216, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 159, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 69, in getMovementCollectionDiff
Module Products.ERP5.mixin.rule, line 117, in getGeneratedMovementList
Module Products.ERP5.Document.BusinessProcess, line 728, in getTradePhaseMovementList
ValueError: A Business Process can not erase amounts
ERROR: test_basicPaySheetCalculation (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 1974, in test_basicPaySheetCalculation
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateUrssafService
CreateLabourService
CreateEmployer
CreateEmployee
CreatePriceCurrency
CreateBasicModel
Tic
ModelCreateUrssafModelLine
UrssafModelLineCreateMovements
CreateBasicPaysheet
PaysheetCreateLabourPaySheetLine
Tic
CreateBusinessProcess
CreateBusinessLink
CreateUrssafRoubaixOrganisation
ModifyBusinessLinkTradePhase
ModelSpecialiseBusinessProcess
Tic
CheckUpdateAggregatedAmountListReturn
> PaysheetApplyTransformation
Tic
CheckPaysheetLineAreCreated
CheckPaysheetLineAmounts
CheckUpdateAggregatedAmountListReturnNothing
CheckPaysheetLineAmounts
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 592, in stepPaysheetApplyTransformation
paysheet.applyTransformation()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/PaySheetTransaction.py", line 205, in applyTransformation
business_link_list = business_process.getPathValueList(trade_phase=\
AttributeError: getPathValueList
ERROR: test_complexSliceOnModelLine (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 2155, in test_complexSliceOnModelLine
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateUrssafService
CreateLabourService
CreateEmployer
CreateEmployee
CreatePriceCurrency
CreateBasicModel
Tic
ModelCreateUrssafModelLine
UrssafModelLineCreateMovements
CreateBasicPaysheet
PaysheetCreateLabourPaySheetLine
Tic
CreateBusinessProcess
CreateBusinessLink
CreateUrssafRoubaixOrganisation
ModifyBusinessLinkTradePhase
ModelSpecialiseBusinessProcess
Tic
CreateUrssafService
CreateLabourService
CreateEmployer
CreateEmployee
CreateModelWithSlices
Tic
ModelCreateUrssafModelLineWithComplexSlices
Tic
UrssafModelLineWithComplexSlicesCreateMovements
CreateBasicPaysheet
PaysheetCreateLabourPaySheetLine
CreateBusinessProcess
CreateBusinessLink
CreateUrssafRoubaixOrganisation
ModifyBusinessLinkTradePhase
ModelSpecialiseBusinessProcess
Tic
CheckUpdateAggregatedAmountListReturnUsingComplexSlices
> PaysheetApplyTransformation
Tic
CheckPaysheetLineAreCreatedUsingComplexSlices
CheckPaysheetLineAmountsUsingComplexSlices
CheckUpdateAggregatedAmountListReturnNothing
CheckPaysheetLineAmountsUsingComplexSlices
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 592, in stepPaysheetApplyTransformation
paysheet.applyTransformation()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/PaySheetTransaction.py", line 205, in applyTransformation
business_link_list = business_process.getPathValueList(trade_phase=\
AttributeError: getPathValueList
ERROR: test_intermediateLines (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 2001, in test_intermediateLines
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateUrssafService
CreateLabourService
CreateEmployer
CreateEmployee
CreateBasicModel
Tic
ModelCreateIntermediateModelLine
ModelCreateAppliedOnTaxModelLine
AppliedOnTaxModelLineCreateMovements
CreateBasicPaysheet
PaysheetCreateLabourPaySheetLine
CreateBusinessProcess
CreateBusinessLink
CreateUrssafRoubaixOrganisation
ModifyBusinessLinkTradePhase
ModelSpecialiseBusinessProcess
Tic
> PaysheetApplyTransformation
Tic
CheckPaysheetIntermediateLines
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 592, in stepPaysheetApplyTransformation
paysheet.applyTransformation()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/PaySheetTransaction.py", line 205, in applyTransformation
business_link_list = business_process.getPathValueList(trade_phase=\
AttributeError: getPathValueList
ERROR: test_modelDateValidity (testPayroll.TestPayroll), check that model effective_date and expiration_date are take into
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 3213, in test_modelDateValidity
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreatePriceCurrency
CreateLabourOutputService
CreateBusinessProcess
CreateBusinessLink
CreateUrssafRoubaixOrganisation
ModifyBusinessLinkTradePhase
Tic
> CheckModelDateValidity
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 1590, in stepCheckModelDateValidity
paysheet.applyTransformation()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/PaySheetTransaction.py", line 205, in applyTransformation
business_link_list = business_process.getPathValueList(trade_phase=\
AttributeError: getPathValueList
ERROR: test_modelLineWithNonePrice (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 2185, in test_modelLineWithNonePrice
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateUrssafService
CreateLabourService
CreateEmployer
CreateEmployee
CreatePriceCurrency
CreateBasicModel
Tic
ModelCreateUrssafModelLine
UrssafModelLineCreateMovementsWithQuantityOnly
CreateBasicPaysheet
PaysheetCreateLabourPaySheetLine
CreateBusinessProcess
CreateBusinessLink
CreateUrssafRoubaixOrganisation
ModifyBusinessLinkTradePhase
ModelSpecialiseBusinessProcess
Tic
CheckUpdateAggregatedAmountListReturn
> PaysheetApplyTransformation
Tic
CheckPaysheetLineAreCreated
CheckPaysheetLineAmountsWithQuantityOnly
CheckUpdateAggregatedAmountListReturnNothing
CheckPaysheetLineAmountsWithQuantityOnly
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 592, in stepPaysheetApplyTransformation
paysheet.applyTransformation()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/PaySheetTransaction.py", line 205, in applyTransformation
business_link_list = business_process.getPathValueList(trade_phase=\
AttributeError: getPathValueList
ERROR: test_modelWithoutDateValidity (testPayroll.TestPayroll), Check that if no DATE are defined on a model, the behavior is that
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 3195, in test_modelWithoutDateValidity
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreatePriceCurrency
CreateLabourOutputService
CreateBusinessProcess
CreateBusinessLink
CreateUrssafRoubaixOrganisation
ModifyBusinessLinkTradePhase
Tic
> CheckModelWithoutDateValidity
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 1496, in stepCheckModelWithoutDateValidity
paysheet_without_date.applyTransformation()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/PaySheetTransaction.py", line 205, in applyTransformation
business_link_list = business_process.getPathValueList(trade_phase=\
AttributeError: getPathValueList
ERROR: test_modelWithoutReferenceValidity (testPayroll.TestPayroll), Check that if no REFERENCE are defined on a model, the behavior is
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 3175, in test_modelWithoutReferenceValidity
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreatePriceCurrency
CreateLabourOutputService
CreateBusinessProcess
CreateBusinessLink
CreateUrssafRoubaixOrganisation
ModifyBusinessLinkTradePhase
Tic
> CheckModelWithoutRefValidity
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 1450, in stepCheckModelWithoutRefValidity
paysheet.applyTransformation()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/PaySheetTransaction.py", line 205, in applyTransformation
business_link_list = business_process.getPathValueList(trade_phase=\
AttributeError: getPathValueList
ERROR: test_paySheetCalculationWithBonus (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 2268, in test_paySheetCalculationWithBonus
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateUrssafService
CreateLabourService
CreateEmployer
CreateEmployee
CreatePriceCurrency
CreateBasicModel
Tic
ModelCreateUrssafModelLine
UrssafModelLineCreateMovements
CreateBasicPaysheet
PaysheetCreateLabourPaySheetLine
Tic
CreateBusinessProcess
CreateBusinessLink
CreateUrssafRoubaixOrganisation
ModifyBusinessLinkTradePhase
ModelSpecialiseBusinessProcess
Tic
CreateBonusService
PaysheetCreateBonusPaySheetLine
PaysheetCreateBonusPaySheetLineMovements
CheckUpdateAggregatedAmountListReturn
> PaysheetApplyTransformation
Tic
CheckPaysheetLineAreCreatedUsingBonus
CheckPaysheetLineWithBonusAmounts
CheckUpdateAggregatedAmountListReturnNothing
CheckPaysheetLineWithBonusAmounts
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 592, in stepPaysheetApplyTransformation
paysheet.applyTransformation()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/PaySheetTransaction.py", line 205, in applyTransformation
business_link_list = business_process.getPathValueList(trade_phase=\
AttributeError: getPathValueList
ERROR: test_predicateOnModelLine (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 2245, in test_predicateOnModelLine
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateUrssafService
CreateLabourService
CreateEmployer
CreateEmployee
CreatePriceCurrency
CreateBasicModel
Tic
ModelCreateUrssafModelLine
UrssafModelLineCreateMovements
CreateBasicPaysheet
PaysheetCreateLabourPaySheetLine
Tic
CreateBusinessProcess
CreateBusinessLink
CreateUrssafRoubaixOrganisation
ModifyBusinessLinkTradePhase
ModelSpecialiseBusinessProcess
Tic
CreateOldAgeInsuranaceService
ModelCreateOldAgeInsuranceModelLine
OldAgeInsuranceModelLineCreateMovements
AddPredicateOnOldAgeInsuranceModelLineForSinglePerson
CreateSicknessInsuranceService
ModelCreateSicknessInsuranceModelLine
SicknessInsuranceModelLineCreateMovements
AddPredicateOnSicknessInsuranceModelLineForMarriedPerson
SetMaritalStatusMarriedOnEmployee
CheckUpdateAggregatedAmountListReturnUsingPredicate
> PaysheetApplyTransformation
Tic
CheckPaysheetLineAreCreatedUsingWith3Lines
CheckPaysheetLineAmountsWithSicknessInsuranceAndUrssaf
CheckUpdateAggregatedAmountListReturnNothing
CheckPaysheetLineAmountsWithSicknessInsuranceAndUrssaf
SetMaritalStatusSingleOnEmployee
CheckUpdateAggregatedAmountListReturnAfterChangePredicate
PaysheetApplyTransformation
Tic
CheckPaysheetLineAreCreatedUsingWith3Lines
CheckPaysheetLineAmountsWithOldAgeInsuranceAndUrssaf
CheckUpdateAggregatedAmountListReturnNothing
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 592, in stepPaysheetApplyTransformation
paysheet.applyTransformation()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/PaySheetTransaction.py", line 205, in applyTransformation
business_link_list = business_process.getPathValueList(trade_phase=\
AttributeError: getPathValueList
ERROR: test_propertiesAreSetOnPaysheetLines (testPayroll.TestPayroll), check porperties from model line (like description, int_index,
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 3345, in test_propertiesAreSetOnPaysheetLines
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateUrssafService
CreateLabourService
CreateEmployer
CreateEmployee
CreatePriceCurrency
CreateBasicModel
Tic
ModelCreateUrssafModelLine
UrssafModelLineCreateMovements
CreateBasicPaysheet
PaysheetCreateLabourPaySheetLine
Tic
CreateBusinessProcess
CreateBusinessLink
CreateUrssafRoubaixOrganisation
ModifyBusinessLinkTradePhase
ModelSpecialiseBusinessProcess
Tic
SetProperiesOnModelLines
Tic
> PaysheetApplyTransformation
Tic
CheckPaysheetLineAreCreated
CheckPaysheetLineAmounts
CheckPropertiesAreCopiedFromModelLineToPaySheetLine
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 592, in stepPaysheetApplyTransformation
paysheet.applyTransformation()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/PaySheetTransaction.py", line 205, in applyTransformation
business_link_list = business_process.getPathValueList(trade_phase=\
AttributeError: getPathValueList
ERROR: test_sliceOnModelLine (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 2125, in test_sliceOnModelLine
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateUrssafService
CreateLabourService
CreateEmployer
CreateEmployee
CreatePriceCurrency
CreateBasicModel
Tic
ModelCreateUrssafModelLine
UrssafModelLineCreateMovements
CreateBasicPaysheet
PaysheetCreateLabourPaySheetLine
Tic
CreateBusinessProcess
CreateBusinessLink
CreateUrssafRoubaixOrganisation
ModifyBusinessLinkTradePhase
ModelSpecialiseBusinessProcess
Tic
CreateUrssafService
CreateLabourService
CreateEmployer
CreateEmployee
CreateModelWithSlices
Tic
ModelCreateUrssafModelLineWithSlices
Tic
UrssafModelLineWithSlicesCreateMovements
CreateBasicPaysheet
PaysheetCreateLabourPaySheetLine
CreateBusinessProcess
CreateBusinessLink
CreateUrssafRoubaixOrganisation
ModifyBusinessLinkTradePhase
ModelSpecialiseBusinessProcess
Tic
CheckUpdateAggregatedAmountListReturnUsingSlices
> PaysheetApplyTransformation
Tic
CheckPaysheetLineAreCreatedUsingSlices
CheckPaysheetLineAmountsUsingSlices
CheckUpdateAggregatedAmountListReturnNothing
CheckPaysheetLineAmountsUsingSlices
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 592, in stepPaysheetApplyTransformation
paysheet.applyTransformation()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/PaySheetTransaction.py", line 205, in applyTransformation
business_link_list = business_process.getPathValueList(trade_phase=\
AttributeError: getPathValueList
ERROR: test_sourceSectionIsSetOnMovements (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 2095, in test_sourceSectionIsSetOnMovements
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateUrssafService
CreateLabourService
CreateEmployer
CreateEmployee
CreatePriceCurrency
CreateBasicModel
Tic
ModelCreateUrssafModelLine
UrssafModelLineCreateMovements
CreateBasicPaysheet
PaysheetCreateLabourPaySheetLine
Tic
CreateBusinessProcess
CreateBusinessLink
CreateUrssafRoubaixOrganisation
ModifyBusinessLinkTradePhase
ModelSpecialiseBusinessProcess
Tic
> PaysheetApplyTransformation
Tic
CheckSourceSectionOnMovements
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 592, in stepPaysheetApplyTransformation
paysheet.applyTransformation()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/PaySheetTransaction.py", line 205, in applyTransformation
business_link_list = business_process.getPathValueList(trade_phase=\
AttributeError: getPathValueList
ERROR: test_updateAddMovements (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 2055, in test_updateAddMovements
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateUrssafService
CreateLabourService
CreateEmployer
CreateEmployee
CreatePriceCurrency
CreateBasicModel
Tic
ModelCreateUrssafModelLine
UrssafModelLineCreateMovements
CreateBasicPaysheet
PaysheetCreateLabourPaySheetLine
Tic
CreateBusinessProcess
CreateBusinessLink
CreateUrssafRoubaixOrganisation
ModifyBusinessLinkTradePhase
ModelSpecialiseBusinessProcess
Tic
CheckUpdateAggregatedAmountListReturn
> PaysheetApplyTransformation
Tic
CheckPaysheetLineAreCreated
CheckPaysheetLineAmounts
CheckUpdateAggregatedAmountListReturnNothing
CreateSicknessInsuranceService
ModelCreateSicknessInsuranceModelLine
SicknessInsuranceModelLineCreateMovements
CheckUpdateAggregatedAmountListReturn
PaysheetApplyTransformation
Tic
CheckPaysheetLineAreCreatedUsingWith3Lines
CheckPaysheetLineAmountsWithSicknessInsuranceAndUrssaf
CheckUpdateAggregatedAmountListReturnNothing
CheckPaysheetLineAmountsWithSicknessInsuranceAndUrssaf
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 592, in stepPaysheetApplyTransformation
paysheet.applyTransformation()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/PaySheetTransaction.py", line 205, in applyTransformation
business_link_list = business_process.getPathValueList(trade_phase=\
AttributeError: getPathValueList
ERROR: test_updateModifyMovements (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 2027, in test_updateModifyMovements
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateUrssafService
CreateLabourService
CreateEmployer
CreateEmployee
CreatePriceCurrency
CreateBasicModel
Tic
ModelCreateUrssafModelLine
UrssafModelLineCreateMovements
CreateBasicPaysheet
PaysheetCreateLabourPaySheetLine
Tic
CreateBusinessProcess
CreateBusinessLink
CreateUrssafRoubaixOrganisation
ModifyBusinessLinkTradePhase
ModelSpecialiseBusinessProcess
Tic
CheckUpdateAggregatedAmountListReturn
> PaysheetApplyTransformation
Tic
CheckPaysheetLineAreCreated
CheckPaysheetLineAmounts
CheckUpdateAggregatedAmountListReturnNothing
ModelModifyUrssafModelLine
CheckUpdateAggregatedAmountListReturnNothing
PaysheetApplyTransformation
Tic
CheckPaysheetLineAreCreated
CheckPaysheetLineNewAmountsAfterUpdate
CheckUpdateAggregatedAmountListReturnNothing
CheckPaysheetLineNewAmountsAfterUpdate
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 592, in stepPaysheetApplyTransformation
paysheet.applyTransformation()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/PaySheetTransaction.py", line 205, in applyTransformation
business_link_list = business_process.getPathValueList(trade_phase=\
AttributeError: getPathValueList
ERROR: test_updatePaysheetAfterModelModification (testPayroll.TestPayroll), generate a paysheet using a model, modify the model by adding a new
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 3329, in test_updatePaysheetAfterModelModification
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateUrssafService
CreateLabourService
CreateEmployer
CreateEmployee
CreatePriceCurrency
CreateModelWithSlices
Tic
ModelCreateUrssafModelLine
UrssafModelLineCreateMovements
CreateBasicPaysheet
PaysheetCreateLabourPaySheetLine
Tic
CreateBusinessProcess
CreateBusinessLink
CreateUrssafRoubaixOrganisation
ModifyBusinessLinkTradePhase
ModelSpecialiseBusinessProcess
Tic
CheckUpdateAggregatedAmountListReturn
> PaysheetApplyTransformation
Tic
CheckPaysheetLineAreCreated
CheckPaysheetLineAmounts
CheckUpdateAggregatedAmountListReturnNothing
CheckPaysheetLineAmounts
ModelCreateUrssafModelLineWithSlices
Tic
UrssafModelLineWithSlicesCreateMovements
Tic
PaysheetApplyTransformation
Tic
CheckPaysheetLineAreCreatedAfterUpdateWithLinesWithSameResource
CheckPaysheetLineAmountsAfterUpdateWithLinesWithSameResource
CheckUpdateAggregatedAmountListReturnNothing
CheckPaysheetLineAmountsAfterUpdateWithLinesWithSameResource
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 592, in stepPaysheetApplyTransformation
paysheet.applyTransformation()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/PaySheetTransaction.py", line 205, in applyTransformation
business_link_list = business_process.getPathValueList(trade_phase=\
AttributeError: getPathValueList
ERROR: test_updateRemoveMovements (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 2081, in test_updateRemoveMovements
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateUrssafService
CreateLabourService
CreateEmployer
CreateEmployee
CreatePriceCurrency
CreateBasicModel
Tic
ModelCreateUrssafModelLine
UrssafModelLineCreateMovements
CreateBasicPaysheet
PaysheetCreateLabourPaySheetLine
Tic
CreateBusinessProcess
CreateBusinessLink
CreateUrssafRoubaixOrganisation
ModifyBusinessLinkTradePhase
ModelSpecialiseBusinessProcess
Tic
CheckUpdateAggregatedAmountListReturn
> PaysheetApplyTransformation
Tic
CheckPaysheetLineAreCreated
CheckPaysheetLineAmounts
CheckUpdateAggregatedAmountListReturnNothing
ModelDelUrssafModelLine
CheckUpdateAggregatedAmountListReturnAfterRemoveLine
PaysheetApplyTransformation
Tic
CheckThereIsOnlyOnePaysheetLine
CheckPaysheetLineLabourAmountOnly
CheckUpdateAggregatedAmountListReturnNothing
CheckPaysheetLineLabourAmountOnly
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 592, in stepPaysheetApplyTransformation
paysheet.applyTransformation()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/PaySheetTransaction.py", line 205, in applyTransformation
business_link_list = business_process.getPathValueList(trade_phase=\
AttributeError: getPathValueList
ERROR: test_01_getYearToDateSlice (testPayroll_l10n_fr.TestPayroll_l10n_fr), Check that is possible to calculate the total amount spend on a slice
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testPayroll_l10n_fr.py", line 118, in test_01_getYearToDateSlice
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateUrssafService
CreateLabourService
CreateEmployer
CreateEmployee
CreatePriceCurrency
CreateModelWithSlices
SetCurrencyOnModel
ModelCreateUrssafModelLineWithSlices
UrssafModelLineWithSlicesCreateMovements
CreateBasicPaysheet
PaysheetSetModelAndApplyIt
PaysheetCreateLabourPaySheetLine
CreateBusinessProcess
CreateBusinessLink
CreateUrssafRoubaixOrganisation
ModifyBusinessLinkTradePhase
ModelSpecialiseBusinessProcess
Tic
CheckUpdateAggregatedAmountListReturnUsingSlices
> PaysheetApplyTransformation
Tic
CheckPaysheetLineAreCreatedUsingSlices
CheckPaysheetLineAmountsUsingSlices
CheckUpdateAggregatedAmountListReturnNothing
CheckPaysheetLineAmountsUsingSlices
CreateBasicPaysheet
PaysheetSetModelAndApplyIt
PaysheetCreateLabourPaySheetLine
CreateBusinessProcess
CreateBusinessLink
CreateUrssafRoubaixOrganisation
ModifyBusinessLinkTradePhase
ModelSpecialiseBusinessProcess
Tic
CheckUpdateAggregatedAmountListReturnUsingSlices
PaysheetApplyTransformation
Tic
CheckPaysheetLineAreCreatedUsingSlices
CheckPaysheetLineAmountsUsingSlices
CheckUpdateAggregatedAmountListReturnNothing
CheckPaysheetLineAmountsUsingSlices
CheckYearToDateSliceAmount
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testPayroll.py", line 592, in stepPaysheetApplyTransformation
paysheet.applyTransformation()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/Document/PaySheetTransaction.py", line 205, in applyTransformation
business_link_list = business_process.getPathValueList(trade_phase=\
AttributeError: getPathValueList
ERROR: test_01_testProductionSimulationExpand (testProductionOrder.TestProductionOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 1351, in test_01_testProductionSimulationExpand
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateProductionSC
CreateNotVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
CheckProductionSimulation
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_303f4118abc2b708b4fa015015b7a00c/production_order_module/1', 'updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 204, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 734, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_02_testSourcingSimulationExpand (testProductionOrder.TestProductionOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 1378, in test_02_testSourcingSimulationExpand
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateSupplyOrganisation1
CreateSourcingSC
CreateNotVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
CheckSourcingSimulation
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_303f4118abc2b708b4fa015015b7a00c/production_order_module/2', 'updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 204, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 734, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_03_testIndustrialPhase (testProductionOrder.TestProductionOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 1406, in test_03_testIndustrialPhase
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateProductionOrganisation2
CreateSupplyOrganisation1
CreateSupplyOrganisation2
CreateTwoPhasesSC
CreateNotVariatedResource
CreateComponent1
CreateComponent2
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
CheckTwoPhasesSimulation
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_303f4118abc2b708b4fa015015b7a00c/production_order_module/3', 'updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 204, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 734, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_04_testProductionSimulationBuild (testProductionOrder.TestProductionOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 1433, in test_04_testProductionSimulationBuild
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateProductionSC
CreateNotVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
ConfirmOrder
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_303f4118abc2b708b4fa015015b7a00c/production_order_module/4', 'updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 204, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 734, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_05_testSourcingSimulationBuild (testProductionOrder.TestProductionOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 1445, in test_05_testSourcingSimulationBuild
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateSupplyOrganisation1
CreateSourcingSC
CreateNotVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
CheckSourcingSimulation
ConfirmOrder
Tic
CheckSourcingSimulation
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_303f4118abc2b708b4fa015015b7a00c/production_order_module/5', 'updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 204, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 734, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_06_testIndustrialPhase (testProductionOrder.TestProductionOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 1476, in test_06_testIndustrialPhase
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateProductionOrganisation2
CreateSupplyOrganisation1
CreateSupplyOrganisation2
CreateTwoPhasesSC
CreateNotVariatedResource
CreateComponent1
CreateComponent2
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
ConfirmOrder
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_303f4118abc2b708b4fa015015b7a00c/production_order_module/6', 'updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 204, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 734, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_08_testTransformationWithEfficiency (testProductionOrder.TestProductionOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 1632, in test_08_testTransformationWithEfficiency
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateSupplyOrganisation1
CreateSourcingSC
Tic
CreateNotVariatedResource
CreateComponent1
CreateEmptyTransformation
FillTransformationWithResource
Tic
CreateTransformationTransformedResource
FillTransformationTransformedResourceWithComponent1
SetTransformationTransformedResourceQuantity
SetTransformationTransformedResourceEfficiency
SetTransformationTransformedResourceIndustrialPhaseList
Tic
CreateOrganisation
CreateOrder
CreateOrderLine
SetOrderLineQuantity
Tic
OrderOrder
> Tic
CheckEfficiencySimulation
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_303f4118abc2b708b4fa015015b7a00c/production_order_module/13', 'updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 204, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 734, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_09_testTransformationWithVariation (testProductionOrder.TestProductionOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 1763, in test_09_testTransformationWithVariation
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateSupplyOrganisation1
CreateSourcingSC
Tic
CreateColourSizeVariatedResource
CreateColourSizeVariatedComponent1
Tic
CreateEmptyTransformation
FillTransformationWithResource
SetTransformationVariation
Tic
CreateTransformationTransformedResource
FillTransformationTransformedResourceWithComponent1
SetTransformationTransformedResourceVariation
SetTransformationTransformedResourceIndustrialPhaseList
Tic
SetTransformationTransformedResourceQuantityMatrix
SetTransformationTransformedResourceVariationMatrix
Tic
CreateOrganisation
CreateOrder
CreateOrderLine
SetOrderLineVariationCategories
SetOrderLineQuantityMatrix
Tic
OrderOrder
> Tic
CheckVariationSimulation
ConfirmOrder
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_303f4118abc2b708b4fa015015b7a00c/production_order_module/14', 'updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 204, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 734, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_01_testProductionSimulationExpand (testProductionOrderApparel.TestProductionOrderApparel)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testProductionOrderApparel.py", line 970, in test_01_testProductionSimulationExpand
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateProductionSC
CreateVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
CheckProductionSimulation
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_de9d0ea35edfa492796f453d4975ad4e/production_order_module/1', 'updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 204, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 734, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_02_testSourcingSimulationExpand (testProductionOrderApparel.TestProductionOrderApparel)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testProductionOrderApparel.py", line 997, in test_02_testSourcingSimulationExpand
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateSupplyOrganisation1
CreateSourcingSC
CreateVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
CheckSourcingSimulation
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_de9d0ea35edfa492796f453d4975ad4e/production_order_module/2', 'updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 204, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 734, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_03_testIndustrialPhase (testProductionOrderApparel.TestProductionOrderApparel)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testProductionOrderApparel.py", line 1025, in test_03_testIndustrialPhase
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateProductionOrganisation2
CreateSupplyOrganisation1
CreateSupplyOrganisation2
CreateTwoPhasesSC
CreateVariatedResource
CreateComponent1
CreateComponent2
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
CheckTwoPhasesSimulation
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_de9d0ea35edfa492796f453d4975ad4e/production_order_module/3', 'updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 204, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 734, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_04_testProductionSimulationBuild (testProductionOrderApparel.TestProductionOrderApparel)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testProductionOrderApparel.py", line 1052, in test_04_testProductionSimulationBuild
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateProductionSC
CreateVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
ConfirmOrder
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_de9d0ea35edfa492796f453d4975ad4e/production_order_module/4', 'updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 204, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 734, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_05_testSourcingSimulationBuild (testProductionOrderApparel.TestProductionOrderApparel)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testProductionOrderApparel.py", line 1064, in test_05_testSourcingSimulationBuild
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateSupplyOrganisation1
CreateSourcingSC
CreateVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
CheckSourcingSimulation
ConfirmOrder
Tic
CheckSourcingSimulation
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_de9d0ea35edfa492796f453d4975ad4e/production_order_module/5', 'updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 204, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 734, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_06_testIndustrialPhase (testProductionOrderApparel.TestProductionOrderApparel)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testProductionOrderApparel.py", line 1095, in test_06_testIndustrialPhase
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateProductionOrganisation2
CreateSupplyOrganisation1
CreateSupplyOrganisation2
CreateTwoPhasesSC
CreateVariatedResource
CreateComponent1
CreateComponent2
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
ConfirmOrder
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_de9d0ea35edfa492796f453d4975ad4e/production_order_module/6', 'updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 204, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 734, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_01_sourcingDelivery (testProductionPackingList.TestProductionDelivery)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testProductionPackingList.py", line 776, in test_01_sourcingDelivery
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateSupplyOrganisation1
CreateSourcingSC
CreateNotVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
CheckSourcingSimulation
ConfirmOrder
Tic
CheckSourcingSimulation
CheckSourcingDeliverySimulation
CheckProducedDeliveryPackingListIsConfirmed
CheckProducedDeliveryPackingListIsSolved
CheckSupplyDeliveryPackingListIsConfirmed
CheckSupplyDeliveryPackingListIsSolved
CheckProducedReportIsConfirmed
CheckProducedReportIsSolved
CheckConsumedReportIsConfirmed
CheckConsumedReportIsSolved
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_48108743c153265094a1592efa897f58/production_order_module/1', 'updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 204, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 734, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: test_01_sourcingDelivery (testProductionPackingListApparel.TestProductionDeliveryApparel)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testProductionPackingList.py", line 776, in test_01_sourcingDelivery
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateSupplyOrganisation1
CreateSourcingSC
CreateVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
> Tic
CheckSourcingSimulation
ConfirmOrder
Tic
CheckSourcingSimulation
CheckSourcingDeliverySimulation
CheckProducedDeliveryPackingListIsConfirmed
CheckProducedDeliveryPackingListIsSolved
CheckSupplyDeliveryPackingListIsConfirmed
CheckSupplyDeliveryPackingListIsSolved
CheckProducedReportIsConfirmed
CheckProducedReportIsSolved
CheckConsumedReportIsConfirmed
CheckConsumedReportIsSolved
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_c6c3b4315d527281a50a4aba93e42411/production_order_module/1', 'updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_production_order_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5.Document.Order, line 204, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 734, in updateAppliedRule
ValueError: No such rule as 'default_production_order_rule' is found
ERROR: testProject_getSourceProjectRelatedTaskReportList (testProject.TestProject)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 540, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testProject.py", line 56, in afterSetUp
rule = getattr(self.portal.portal_rules, rule_id)
AttributeError: default_order_rule
ERROR: test_01_ReturnedSalePackingListWithInventory (testReturnedSalePackingList.TestReturnedSalePackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testReturnedSalePackingList.py", line 458, in test_01_ReturnedSalePackingListWithInventory
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateCurrency
CreateNotVariatedResource
Tic
Tic
CreateInitialInventory
Tic
CheckInitialInventory
CreateReturnedPackingList
ConfirmReturnedPackingList
ShipReturnedPackingList
ReceiveReturnedPackingList
DeliverReturnedPackingList
> Tic
CheckReturnedInventory
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_fc5391439c7dad222cda3fff8f258071/returned_sale_packing_list_module/1', 'expand', -2, 5)]
Last error message:
ValueError
A Business Process can not erase amounts
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 799, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 216, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 159, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 69, in getMovementCollectionDiff
Module Products.ERP5.mixin.rule, line 117, in getGeneratedMovementList
Module Products.ERP5.Document.BusinessProcess, line 728, in getTradePhaseMovementList
ValueError: A Business Process can not erase amounts
ERROR: test_02_ReturnedSalePackingListWorkflow (testReturnedSalePackingList.TestReturnedSalePackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testReturnedSalePackingList.py", line 487, in test_02_ReturnedSalePackingListWorkflow
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateCurrency
CreateNotVariatedResource
Tic
Tic
CreateReturnedPackingList
ConfirmReturnedPackingList
> Tic
CheckConfirmedReturnedPackingList
ShipReturnedPackingList
Tic
CheckShippedReturnedPackingList
ReceiveReturnedPackingList
Tic
CheckReceivedReturnedPackingList
DeliverReturnedPackingList
Tic
CheckDeliveredReturnedPackingList
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_fc5391439c7dad222cda3fff8f258071/returned_sale_packing_list_module/2', 'expand', -2, 5)]
Last error message:
ValueError
A Business Process can not erase amounts
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 799, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 216, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 159, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 69, in getMovementCollectionDiff
Module Products.ERP5.mixin.rule, line 117, in getGeneratedMovementList
Module Products.ERP5.Document.BusinessProcess, line 728, in getTradePhaseMovementList
ValueError: A Business Process can not erase amounts
ERROR: test_03_ReturnedSalePackingListWorkflowFail (testReturnedSalePackingList.TestReturnedSalePackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testReturnedSalePackingList.py", line 520, in test_03_ReturnedSalePackingListWorkflowFail
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateCurrency
CreateNotVariatedResource
Tic
Tic
CreateReturnedPackingList
ConfirmReturnedPackingList
> Tic
CheckConfirmedReturnedPackingList
ShipReturnedPackingList
Tic
CheckShippedReturnedPackingList
ReceiveReturnedPackingList
Tic
CheckReceivedReturnedPackingList
DeliverReturnedPackingList
Tic
CheckDeliveredReturnedPackingList
Tic
ConfirmReturnedPackingList
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1034, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 162, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_fc5391439c7dad222cda3fff8f258071/returned_sale_packing_list_module/3', 'expand', -2, 5)]
Last error message:
ValueError
A Business Process can not erase amounts
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 799, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 216, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 159, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 69, in getMovementCollectionDiff
Module Products.ERP5.mixin.rule, line 117, in getGeneratedMovementList
Module Products.ERP5.Document.BusinessProcess, line 728, in getTradePhaseMovementList
ValueError: A Business Process can not erase amounts
ERROR: test_01_ValidatedRuleWithNoScript (testRule.TestRule)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 540, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testRule.py", line 48, in afterSetUp
reference='default_order_rule', version='1')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 459, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 151, in newContent
raise ValueError('Disallowed subobject type: %s' % portal_type)
ValueError: Disallowed subobject type: Order Rule
ERROR: test_02_WrongTestMethod (testRule.TestRule)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 540, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testRule.py", line 48, in afterSetUp
reference='default_order_rule', version='1')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 459, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 151, in newContent
raise ValueError('Disallowed subobject type: %s' % portal_type)
ValueError: Disallowed subobject type: Order Rule
ERROR: test_03_GoodTestMethod (testRule.TestRule)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 540, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testRule.py", line 48, in afterSetUp
reference='default_order_rule', version='1')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 459, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 151, in newContent
raise ValueError('Disallowed subobject type: %s' % portal_type)
ValueError: Disallowed subobject type: Order Rule
ERROR: test_04_NotValidatedRule (testRule.TestRule)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 540, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testRule.py", line 48, in afterSetUp
reference='default_order_rule', version='1')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 459, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 151, in newContent
raise ValueError('Disallowed subobject type: %s' % portal_type)
ValueError: Disallowed subobject type: Order Rule
ERROR: test_06_WrongDateRange (testRule.TestRule)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 540, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testRule.py", line 48, in afterSetUp
reference='default_order_rule', version='1')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 459, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 151, in newContent
raise ValueError('Disallowed subobject type: %s' % portal_type)
ValueError: Disallowed subobject type: Order Rule
ERROR: test_07_GoodDateRange (testRule.TestRule)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 540, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testRule.py", line 48, in afterSetUp
reference='default_order_rule', version='1')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 459, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 151, in newContent
raise ValueError('Disallowed subobject type: %s' % portal_type)
ValueError: Disallowed subobject type: Order Rule
ERROR: test_08_updateAppliedRule (testRule.TestRule)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 540, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testRule.py", line 48, in afterSetUp
reference='default_order_rule', version='1')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 459, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 151, in newContent
raise ValueError('Disallowed subobject type: %s' % portal_type)
ValueError: Disallowed subobject type: Order Rule
ERROR: test_09_expandTwoRules (testRule.TestRule)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 540, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testRule.py", line 48, in afterSetUp
reference='default_order_rule', version='1')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 459, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 151, in newContent
raise ValueError('Disallowed subobject type: %s' % portal_type)
ValueError: Disallowed subobject type: Order Rule
ERROR: test_10_expandAddsRule (testRule.TestRule)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 540, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testRule.py", line 48, in afterSetUp
reference='default_order_rule', version='1')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 459, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 151, in newContent
raise ValueError('Disallowed subobject type: %s' % portal_type)
ValueError: Disallowed subobject type: Order Rule
ERROR: test_11_expandRemovesRule (testRule.TestRule)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 540, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testRule.py", line 48, in afterSetUp
reference='default_order_rule', version='1')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 459, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 151, in newContent
raise ValueError('Disallowed subobject type: %s' % portal_type)
ValueError: Disallowed subobject type: Order Rule
ERROR: test_12_expandReplacesRule (testRule.TestRule)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 540, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testRule.py", line 48, in afterSetUp
reference='default_order_rule', version='1')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 459, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/Core/Folder.py", line 151, in newContent
raise ValueError('Disallowed subobject type: %s' % portal_type)
ValueError: Disallowed subobject type: Order Rule
ERROR: test_03_MemcachedDistributedSession (testSessionTool.TestSessionTool), Test DistributedSession which uses memcached based cache plugin.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/Products/ERP5Type/tests/testSessionTool.py", line 302, in test_03_MemcachedDistributedSession
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 195, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 115, in play
self._step_list[self._played_index] \
Current Sequence:
TestSetGet
ModifySession
DeleteClearSession
TestSessionDictInterface
TestSessionGetattr
TestSessionBulkStorage
TestSessionExpire
> TestCheckSessionAfterNewPerson
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 98, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/Products/ERP5Type/tests/testSessionTool.py", line 262, in stepTestCheckSessionAfterNewPerson
reference='test')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/Core/Folder.py", line 459, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/Core/Folder.py", line 172, in newContent
new_instance._edit(force_update=1, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/Base.py", line 1664, in _edit
unmodified_key_list = setChangedPropertyList(unordered_key_list)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/Base.py", line 1648, in setChangedPropertyList
modified_object_list = _setProperty(key, kw[key])
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/Base.py", line 1429, in _setProperty
return method(value, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/Document/Person.py", line 190, in setReference
raise RuntimeError, 'user id %s already exist' % (value,)
RuntimeError: user id test already exist
ERROR: testProjectMontlyReport (testTaskReporting.TestTaskReporting)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 540, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testTaskReporting.py", line 62, in afterSetUp
rule = getattr(self.portal.portal_rules, rule_id)
AttributeError: default_order_rule
FAIL: test_tradeModelLineWithRounding (testTradeModelLine.TestTradeModelLineSale)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 1096, in test_tradeModelLineWithRounding
self.assertEqual(2, len(amount_list)) # XXX 1 or 2 ???
AssertionError: 2 != 1
FAIL: test_tradeModelLineWithRounding (testTradeModelLinePurchase.TestTradeModelLinePurchase)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 1096, in test_tradeModelLineWithRounding
self.assertEqual(2, len(amount_list)) # XXX 1 or 2 ???
AssertionError: 2 != 1
FAIL: test_configurationOfFieldLibrary (testXHTML.TestXHTML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testXHTML.py", line 208, in test_configurationOfFieldLibrary
self.fail(message)
AssertionError: 12 fields to modify
erp5_trade/BusinessLink_view/my_delivery_builder: To be proxified
erp5_trade/TradeModelPath_view/my_max_delay: To be proxified
erp5_trade/TradeModelPath_view/my_min_delay: To be proxified
erp5_trade/TradeModelPath_view/my_payment_additional_term: To be proxified
erp5_trade/TradeModelPath_view/my_payment_end_of_month: To be proxified
erp5_trade/TradeModelPath_view/my_payment_term: To be proxified
erp5_trade/Base_viewTradeFieldLibrary/my_view_mode_delivery_builder_list: Unused Proxy Field
erp5_trade/Base_viewTradeFieldLibrary/my_view_mode_lead_time: Unused Proxy Field
erp5_trade/Base_viewTradeFieldLibrary/my_view_mode_listbox_deliverable: Unused Proxy Field
erp5_trade/Base_viewTradeFieldLibrary/my_view_mode_order_builder_list: Unused Proxy Field
erp5_trade/Base_viewTradeFieldLibrary/my_view_mode_referential_date: Unused Proxy Field
erp5_trade/Base_viewTradeFieldLibrary/my_view_mode_wait_time: Unused Proxy Field
FAIL: test_duplicatingSelectionNameInListbox (testXHTML.TestXHTML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testXHTML.py", line 248, in test_duplicatingSelectionNameInListbox
self.assertEquals(duplicating_selection_name_dict, {})
AssertionError: {'sale_supply_line_selection': ['erp5_trade/SaleTradeCondition_view/listbox', 'erp5_pdm/SaleSupply_view/listbox'], 'purchase_supply_line_selection': ['erp5_trade/PurchaseTradeCondition_view/listbox', 'erp5_pdm/PurchaseSupply_view/listbox'], 'requirement_fast_input': ['erp5_project/Requirement_viewDocumentFastInputDialog/listbox', 'erp5_project/Requirement_viewRequirementFastInputDialog/listbox'], 'folder_workflow_report_selection': ['erp5_core/Folder_viewWorkflowReport/listbox', 'erp5_project/ProjectModule_viewMilestoneReport/listbox'], 'Base_jumpToRelatedObjectList': ['erp5_core/Base_jumpToRelatedObjectList/listbox', 'erp5_pdm/Resource_viewRelatedSupplyLineList/listbox'], 'person_assignment_selection': ['erp5_base/Person_viewAssignment/listbox', 'erp5_km_theme/Person_viewAsWeb/assignment_listbox'], 'sale_packing_list_movement_selection': ['erp5_trade/SalePackingList_view/listbox', 'erp5_trade/SalePackingList_viewDetails/listbox'], 'erp5_site_sale_resource_selection': ['erp5_pdm/ERP5Site_viewPurchaseResourceList/listbox', 'erp5_pdm/ERP5Site_viewSaleResourceList/listbox'], 'range_selection': ['erp5_core/ContributionPredicate_view/listbox', 'erp5_core/Predicate_view/listbox'], 'web_view_my_content_selection_gadget': ['erp5_km_widget_library/WebSection_viewTagGadget/listbox', 'erp5_km_widget_library/WebSite_viewMyContentListGadget/listbox'], 'search_selection': ['erp5_core/Base_viewSearchResultList/listbox', 'erp5_core/IdTool_view/listbox'], 'role_selection': ['erp5_core/BaseType_viewRole/listbox', 'erp5_documentation/BusinessTemplateRoleDocumentationHelper_view/portal_type_role_listbox', 'erp5_documentation/PortalTypeDocumentationHelper_view/portal_type_role_listbox'], 'base_category_selection': ['erp5_documentation/BusinessTemplateDocumentationHelper_view/base_category_listbox', 'erp5_documentation/PortalTypeDocumentationHelper_view/base_category_listbox'], 'portal_type_selection': ['erp5_core/TypesTool_viewContentList/listbox', 'erp5_documentation/BusinessTemplateDocumentationHelper_view/portal_type_listbox'], 'project_task_selection': ['erp5_project/ProjectLine_viewTaskList/listbox', 'erp5_project/Project_viewTaskList/listbox'], 'class_method_selection': ['erp5_documentation/BaseCategoryDocumentationHelper_view/class_method_listbox', 'erp5_documentation/PortalTypeDocumentationHelperAppendixClassMethod_view/listbox', 'erp5_documentation/PortalTypeDocumentationHelper_view/class_method_listbox', 'erp5_documentation/PortalTypeInstanceDocumentationHelper_view/class_method_listbox'], 'sale_invoice_line_selection': ['erp5_invoicing/SaleInvoiceTransaction_viewInvoice/listbox', 'erp5_advanced_invoicing/SaleInvoice_viewInvoice/listbox'], 'accessor_method_selection': ['erp5_documentation/BaseCategoryDocumentationHelper_view/listbox', 'erp5_documentation/PortalTypeDocumentationHelper_view/listbox', 'erp5_documentation/PortalTypeInstanceDocumentationHelper_view/listbox'], 'purchase_invoice_line_selection': ['erp5_invoicing/PurchaseInvoiceTransaction_viewInvoice/listbox', 'erp5_advanced_invoicing/PurchaseInvoice_viewInvoice/listbox'], 'item_tracking_selection': ['erp5_item/Item_viewTrackingList/listbox', 'erp5_item_trade/Delivery_viewAggregatedItemList/listbox'], 'trash_bin_selection': ['erp5_core/TrashBin_viewTrashObject/listbox', 'erp5_core/TrashTool_viewTrashBinList/listbox'], 'section_content_selection': ['erp5_web/WebSection_viewContent/listbox', 'erp5_web/WebSection_viewContentList/listbox'], 'sale_order_line_selection': ['erp5_trade/SaleOrder_view/listbox', 'erp5_commerce_widget_library/SaleOrder_viewDetailAsWeb/listbox'], 'foo_line_selection': ['erp5_ui_test/Foo_view/listbox', 'erp5_ui_test/Foo_viewListBoxProxyField/listbox', 'erp5_ui_test/Foo_viewPerformance/listbox', 'erp5_ui_test/Foo_viewProxyField/listbox', 'erp5_ui_test/Foo_viewRelationField/listbox'], 'delivery_view_aggregated_amount_list_selection': ['erp5_trade/DeliveryLine_viewAggregatedAmountList/listbox', 'erp5_trade/Delivery_viewAggregatedAmountList/listbox'], 'entity_viewFinancialInformationList_bank_account_selection': ['erp5_base/Organisation_viewFinancialInformationList/listbox', 'erp5_base/Person_viewFinancialInformationList/listbox'], 'folder_selection': ['erp5_core/Base_viewListModeRenderer/listbox', 'erp5_core/Folder_viewContentList/listbox'], 'workflow_variable_selection': ['erp5_documentation/DCWorkflowDocumentationHelper_view/workflow_variable_listbox', 'erp5_documentation/InteractionWorkflowDocumentationHelper_view/workflow_variable_listbox'], 'workflow_method_selection': ['erp5_documentation/PortalTypeDocumentationHelper_view/workflow_method_listbox', 'erp5_documentation/PortalTypeInstanceDocumentationHelper_view/workflow_method_listbox'], 'workflow_transition_selection': ['erp5_documentation/DCWorkflowDocumentationHelper_view/workflow_transition_listbox', 'erp5_documentation/DCWorkflowStateDocumentationHelper_view/workflow_transition_listbox'], 'bar_line_selection': ['erp5_ui_test/Bar_view/listbox', 'erp5_ui_test/Bar_viewPerformance/listbox'], 'document_analysis_documents_fast_input': ['erp5_consulting/DocumentAnalysisDocuments_addFastInput/listbox', 'erp5_consulting/DocumentAnalysisDocuments_addFastInputTest/listbox'], 'sale_order_selection': ['erp5_trade/SaleOrderModule_viewSaleOrderList/listbox', 'erp5_commerce_widget_library/SaleOrderModule_viewAsWebSaleOrderList/listbox'], 'accounting_transaction_module_paysheet_line_selection': ['erp5_payroll/AccountingTransactionModule_viewNetSalaryReportSection/listbox', 'erp5_payroll/AccountingTransactionModule_viewPaySheetLineReportSection/listbox'], 'workflow_script_selection': ['erp5_documentation/DCWorkflowDocumentationHelper_view/workflow_script_listbox', 'erp5_documentation/InteractionWorkflowDocumentationHelper_view/workflow_script_listbox'], 'workflow_selection': ['erp5_documentation/BusinessTemplateDocumentationHelper_view/dc_workflow_listbox', 'erp5_documentation/BusinessTemplateDocumentationHelper_view/interaction_workflow_listbox'], 'latest_addition_document_list_selection': ['erp5_web/WebSite_viewLatestAdditionList/listbox', 'erp5_km_theme/WebSite_viewLatestAdditionList/listbox'], 'Base_viewRelatedObjectList': ['erp5_core/Base_viewRelatedObjectList/listbox', 'erp5_core/Base_viewRelatedObjectListBase/listbox', 'erp5_ui_test/Base_viewCustomRelatedObjectList/listbox'], 'property_sheet_selection': ['erp5_documentation/PortalTypeDocumentationHelperAppendixPropertySheet_view/listbox', 'erp5_documentation/PortalTypeDocumentationHelper_view/property_sheet_listbox'], 'accounting_transaction_line_selection': ['erp5_accounting/AccountingTransaction_view/listbox', 'erp5_immobilisation/AmortisationTransaction_view/listbox'], 'movement_group_selection': ['erp5_base/DeliveryBuilder_view/listbox', 'erp5_base/OrderBuilder_view/listbox'], 'workflow_state_selection': ['erp5_documentation/DCWorkflowDocumentationHelper_view/workflow_state_listbox', 'erp5_documentation/DCWorkflowTransitionDocumentationHelper_view/workflow_state_listbox']} != {}
More information about the Erp5-report
mailing list