[Erp5-report] ERP5 r35690 : 3553 Tests, 9 Errors, 17 Failures, 44 Skips
nobody at svn.erp5.org
nobody at svn.erp5.org
Thu May 27 22:10:12 CEST 2010
Test Suite: ERP5
Revision: 35690
Result: FAIL
All tests: 3553
Failures: 17
Errors: 9
Skips: 44
The following tests failed:
testBusinessTemplate (1 failures, 2 skips)
test_167_InstanceAndRelatedClassDefinedInSameBT (testBusinessTemplate.TestBusinessTemplate)
testDms (1 failures)
test_parallel_conversion (testDms.TestDocument), Check that conversion engine is able to fill in
testDmsWithFlare (1 failures)
test_parallel_conversion (testDmsWithFlare.TestDocumentWithFlare), Check that conversion engine is able to fill in
testERP5CurrencyExchangeLine (1 failures)
test_CreateCELWithNoBasePrice (testERP5CurrencyExchangeLine.TestCurrencyExchangeLine)
testERP5DocumentSyncML (1 failures)
test_06_UpdateMultiData (testERP5DocumentSyncML.TestERP5DocumentSyncML)
testERP5Simulation (3 failures, 5 skips)
test_09_InvoiceChangeStartDateFail (testERP5Simulation.TestERP5SimulationInvoice)
test_18_compareInvoiceAndPackingList (testERP5Simulation.TestERP5SimulationInvoice)
test_Reference (testERP5Simulation.TestERP5SimulationInvoice)
testFormPrintoutAsODT (1 failures, 1 skips)
test_02_Table_07_CellFormat (testFormPrintoutAsODT.TestFormPrintoutAsODT), 7. Normal case: make sure that it is enable to use ODF cell format setting in FormPrintout
testICal (1 failures)
test_01_renderEvent (testICal.TestICal)
testInvalidationBug (2 failures)
testCommitOrder (testInvalidationBug.TestInvalidationBug), Check order of resources being committed
testLateInvalidationFromZEO (testInvalidationBug.TestInvalidationBug)
testOOoConversionCache (3 errors)
test_06_check_md5_is_updated (testOOoConversionCache.TestDocumentConversionCache)
test_07_check_cache_key_is_escaped (testOOoConversionCache.TestDocumentConversionCache)
test_08_check_conversion_cache_with_portal_document_type_list (testOOoConversionCache.TestDocumentConversionCache), Check cache conversion for all Portal Document Types
testOpenOrder (3 failures)
testBuildingSaleOrder (testOpenOrder.TestOpenOrder)
testOpenOrderRule (testOpenOrder.TestOpenOrder)
testPeriodicityDateList (testOpenOrder.TestOpenOrder)
testPasswordTool (6 errors)
test_01_checkPasswordTool (testPasswordTool.TestPasswordTool)
test_login_with_trailing_space (testPasswordTool.TestPasswordTool)
test_two_concurrent_password_reset (testPasswordTool.TestPasswordTool)
test_01_checkPasswordTool (testPasswordTool.TestPasswordToolWithCRM)
test_login_with_trailing_space (testPasswordTool.TestPasswordToolWithCRM)
test_two_concurrent_password_reset (testPasswordTool.TestPasswordToolWithCRM)
testSerializeForm (1 failures)
test checking if the field values are of the proper type.
testTemplate (1 failures)
test_manyTemplatesWithoutReindexation (testTemplate.TestTemplate), Check what happen when templates are created one by one without reindexation
The following tests were at least partly skipped:
testBase (3 skips)
test_NonIndexable (testBase.TestBase), check if a document is not indexed where we set isIndexable=0 in the same transaction of newContent(). ... skipped 'isIndexable is not designed to work like tested here, this test must be rewritten once we know how to handle correctly templates'
test_NonIndexable2 (testBase.TestBase), check if a document is not indexed where we call edit() and set isIndexable=0 after it is already indexed. ... skipped 'isIndexable is not designed to work like tested here, this test must be rewritten once we know how to handle correctly templates'
test_NonIndexable3 (testBase.TestBase), check if a document is not indexed where we set isIndexable=0 and call edit() after it is already indexed. ... skipped 'isIndexable is not designed to work like tested here, this test must be rewritten once we know how to handle correctly templates'
testBusinessTemplate (2 skips)
testCMFActivity (1 skips)
testERP5Base (1 skips)
testERP5Catalog (3 skips)
test_49_IndexInOrderedSearchFolder (testERP5Catalog.TestERP5Catalog) ... skipped 'TODO ERP5'
test_SubDocumentsWithAcquireLocalRoleSecurityIndexing (testERP5Catalog.TestERP5Catalog) ... skipped 'TODO ERP5'
test_sortOnRelatedKeyWithUnsetRelation (testERP5Catalog.TestERP5Catalog) ... skipped 'TODO ERP5'
testERP5Interfaces (13 skips)
testERP5Simulation (5 skips)
testERP5TypeInterfaces (1 skips)
testFormPrintoutAsODT (1 skips)
test_09_FieldReplacementWithValidation (testFormPrintoutAsODT.TestFormPrintoutAsODT) ... skipped 'Disable validation because OOo does not produce compliant xml, and RelaxNG status is still draft'
testMRP (4 skips)
test_TransformationRule_expand_concurrent (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationRule_expand_reexpand (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationRule_getHeadProductionPathList (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationSourcingRule_expand (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
testProxyField (1 skips)
testSQLCachedWorklist (1 skips)
test_02_related_key (testSQLCachedWorklist.TestSQLCachedWorklist) ... skipped 'TODO ERP5'
testSelectionTool (7 skips)
skipped 'Test to be written'
testPage (testSelectionTool.TestSelectionTool) ... skipped 'Test to be written'
testView (testSelectionTool.TestSelectionTool) ... skipped 'Test to be written'
skipped 'Test to be written'
testDeleteGlobalSelection (testSelectionTool.TestSelectionToolMemcachedStorage) ... skipped 'To be decided if implementation is required'
testPage (testSelectionTool.TestSelectionToolMemcachedStorage) ... skipped 'Test to be written'
testView (testSelectionTool.TestSelectionToolMemcachedStorage) ... skipped 'Test to be written'
testTranslation (1 skips)
-------------- next part --------------
FAIL: test_167_InstanceAndRelatedClassDefinedInSameBT (testBusinessTemplate.TestBusinessTemplate)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 6371, in test_167_InstanceAndRelatedClassDefinedInSameBT
self.assertTrue(getattr(portal.another_file, 'isClassOverriden', False))
AssertionError
FAIL: test_parallel_conversion (testDms.TestDocument), Check that conversion engine is able to fill in
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1640, in test_parallel_conversion
self.assertEquals(result_list, [])
AssertionError: [39] != []
FAIL: test_parallel_conversion (testDmsWithFlare.TestDocumentWithFlare), Check that conversion engine is able to fill in
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1640, in test_parallel_conversion
self.assertEquals(result_list, [])
AssertionError: [8] != []
FAIL: test_CreateCELWithNoBasePrice (testERP5CurrencyExchangeLine.TestCurrencyExchangeLine)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testERP5CurrencyExchangeLine.py", line 508, in test_CreateCELWithNoBasePrice
327979)
AssertionError: 500.0 != 327979
FAIL: test_06_UpdateMultiData (testERP5DocumentSyncML.TestERP5DocumentSyncML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5SyncML/tests/testERP5DocumentSyncML.py", line 800, in test_06_UpdateMultiData
self.checkSynchronizationStateIsSynchronized()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5SyncML/tests/testERP5DocumentSyncML.py", line 433, in checkSynchronizationStateIsSynchronized
self.assertEqual(state[1], state[0].SYNCHRONIZED)
AssertionError: 409 != 1
FAIL: test_09_InvoiceChangeStartDateFail (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2828, in test_09_InvoiceChangeStartDateFail
self.playSequence(sequence, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
ChangeInvoiceStartDate
CheckInvoiceIsDivergent
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
UnifyStartDateWithDecisionInvoice
Tic
CheckInvoiceNotSplitted
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
> CheckPackingListIsDivergent
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testPackingList.py", line 189, in stepCheckPackingListIsDivergent
self.assertTrue(packing_list.isDivergent())
AssertionError
FAIL: test_18_compareInvoiceAndPackingList (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 3400, in test_18_compareInvoiceAndPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
CheckInvoicesConsistency
> CheckPackingListInvoice
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 608, in stepCheckPackingListInvoice
self.assertEquals(packing_list.getSource(), invoice.getSource())
AssertionError: 'organisation_module/144' != 'organisation_module/146'
FAIL: test_Reference (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 3324, in test_Reference
self.assertEquals('1', invoice.getReference())
AssertionError: '1' != '3'
FAIL: test_02_Table_07_CellFormat (testFormPrintoutAsODT.TestFormPrintoutAsODT), 7. Normal case: make sure that it is enable to use ODF cell format setting in FormPrintout
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testFormPrintoutAsODT.py", line 633, in test_02_Table_07_CellFormat
self.assertEqual(date_column.attrib[date_value_attrib], '2009-04-20')
AssertionError: '2009-04-19' != '2009-04-20'
FAIL: test_01_renderEvent (testICal.TestICal)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testICal.py", line 151, in test_01_renderEvent
self.assertEquals( # if this fail for you, try to set $TZ to Europe/Paris
AssertionError: '20070815T143000Z' != '20070815T083000Z'
FAIL: testCommitOrder (testInvalidationBug.TestInvalidationBug), Check order of resources being committed
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testInvalidationBug.py", line 92, in testCommitOrder
self.assertEqual(result_list[-2], [1,0]) # catalog
AssertionError: [1, 1] != [1, 0]
FAIL: testLateInvalidationFromZEO (testInvalidationBug.TestInvalidationBug)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testInvalidationBug.py", line 168, in testLateInvalidationFromZEO
self.assertNoPendingMessage()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 128, in assertNoPendingMessage
raise self.fail(error_message)
AssertionError: These messages are pending: [('/erp5_portal_dbc865b0f58a63ce83de451b148c0de2/organisation_module/2', 'immediateReindexObject', -3, 0)]
Last error message:
KeyError
'2'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1189, in invokeGroup
Module Products.CMFActivity.ActivityTool, line 213, in getObject
Module OFS.Traversable, line 233, in unrestrictedTraverse
- __traceback_info__: ([], '2')
Module OFS.ObjectManager, line 715, in __getitem__
KeyError: '2'
ERROR: test_06_check_md5_is_updated (testOOoConversionCache.TestDocumentConversionCache)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 168, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 997, in tearDown
PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5OOo/tests/testOOoConversionCache.py", line 84, in beforeTearDown
self.clearDocumentModule()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 175, in clearDocumentModule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 158, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_371d27d3cf41fe6a371bb96c91b0e1a7/document_module/4', 'recursiveImmediateReindexObject', -3, 0)]
Last error message:
KeyError
'4'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1189, in invokeGroup
Module Products.CMFActivity.ActivityTool, line 213, in getObject
Module OFS.Traversable, line 233, in unrestrictedTraverse
- __traceback_info__: ([], '4')
Module OFS.ObjectManager, line 715, in __getitem__
KeyError: '4'
ERROR: test_07_check_cache_key_is_escaped (testOOoConversionCache.TestDocumentConversionCache)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 537, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 115, in afterSetUp
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 158, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_371d27d3cf41fe6a371bb96c91b0e1a7/document_module/4', 'recursiveImmediateReindexObject', -3, 0)]
Last error message:
KeyError
'4'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1189, in invokeGroup
Module Products.CMFActivity.ActivityTool, line 213, in getObject
Module OFS.Traversable, line 233, in unrestrictedTraverse
- __traceback_info__: ([], '4')
Module OFS.ObjectManager, line 715, in __getitem__
KeyError: '4'
ERROR: test_08_check_conversion_cache_with_portal_document_type_list (testOOoConversionCache.TestDocumentConversionCache), Check cache conversion for all Portal Document Types
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 140, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 537, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 115, in afterSetUp
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 158, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_371d27d3cf41fe6a371bb96c91b0e1a7/document_module/4', 'recursiveImmediateReindexObject', -3, 0)]
Last error message:
KeyError
'4'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1189, in invokeGroup
Module Products.CMFActivity.ActivityTool, line 213, in getObject
Module OFS.Traversable, line 233, in unrestrictedTraverse
- __traceback_info__: ([], '4')
Module OFS.ObjectManager, line 715, in __getitem__
KeyError: '4'
FAIL: testBuildingSaleOrder (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 400, in testBuildingSaleOrder
self.assertEqual(len(open_sale_order.getCausalityRelatedValueList(portal_type='Sale Order')), 9)
AssertionError: 0 != 9
FAIL: testOpenOrderRule (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 303, in testOpenOrderRule
[(DateTime(3000,2,10,10,0), DateTime(3000,2,11,10,0)),
AssertionError: [(DateTime('3000/02/10 10:00:00 US/Eastern'), DateTime('3000/02/11 10:00:00 US/Eastern')), (DateTime('3000/02/17 10:00:00 US/Eastern'), DateTime('3000/02/18 10:00:00 US/Eastern')), (DateTime('3000/02/24 10:00:00 US/Eastern'), DateTime('3000/02/25 10:00:00 US/Eastern')), (DateTime('3000/03/03 10:00:00 US/Eastern'), DateTime('3000/03/04 10:00:00 US/Eastern')), (DateTime('3000/03/10 10:00:00 US/Eastern'), DateTime('3000/03/11 10:00:00 US/Eastern'))] != [(DateTime('3000/02/10 10:00:00 US/Eastern'), DateTime('3000/02/11 10:00:00 US/Eastern')), (DateTime('3000/02/17 10:00:00 US/Eastern'), DateTime('3000/02/18 10:00:00 US/Eastern')), (DateTime('3000/02/24 10:00:00 US/Eastern'), DateTime('3000/02/25 10:00:00 US/Eastern')), (DateTime('3000/03/03 10:00:00 US/Eastern'), DateTime('3000/03/04 10:00:00 US/Eastern')), (DateTime('3000/03/10 10:00:00 GMT-4'), DateTime('3000/03/11 10:00:00 GMT-4'))]
FAIL: testPeriodicityDateList (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 185, in testPeriodicityDateList
[(D(2008,2,1,0,1), DateTime(2008,2,29)),
AssertionError: [(DateTime('2008/02/01 00:01:00 US/Eastern'), DateTime('2008/02/29')), (DateTime('2008/03/01 00:01:00 US/Eastern'), DateTime('2008/03/31')), (DateTime('2008/04/01 00:01:00 US/Eastern'), DateTime('2008/04/30')), (DateTime('2008/05/01 00:01:00 US/Eastern'), DateTime('2008/05/31')), (DateTime('2008/06/01 00:01:00 US/Eastern'), DateTime('2008/06/30')), (DateTime('2008/07/01 00:01:00 US/Eastern'), DateTime('2008/07/31')), (DateTime('2008/08/01 00:01:00 US/Eastern'), DateTime('2008/08/31')), (DateTime('2008/09/01 00:01:00 US/Eastern'), DateTime('2008/09/30')), (DateTime('2008/10/01 00:01:00 US/Eastern'), DateTime('2008/10/31')), (DateTime('2008/11/01 00:01:00 US/Eastern'), DateTime('2008/11/30'))] != [(DateTime('2008/02/01 00:01:00 US/Eastern'), DateTime('2008/02/29')), (DateTime('2008/03/01 00:01:00 US/Eastern'), DateTime('2008/03/31')), (DateTime('2008/04/01 00:01:00 GMT-4'), DateTime('2008/04/30')), (DateTime('2008/05/01 00:01:00 GMT-4'), DateTime('2008/05/31')), (DateTime('2008/06/01 00:01:00 GMT-4'), DateTime('2008/06/30')), (DateTime('2008/07/01 00:01:00 GMT-4'), DateTime('2008/07/31')), (DateTime('2008/08/01 00:01:00 GMT-4'), DateTime('2008/08/31')), (DateTime('2008/09/01 00:01:00 GMT-4'), DateTime('2008/09/30')), (DateTime('2008/10/01 00:01:00 GMT-4'), DateTime('2008/10/31')), (DateTime('2008/11/01 00:01:00 GMT-4'), DateTime('2008/11/30'))]
ERROR: test_01_checkPasswordTool (testPasswordTool.TestPasswordTool)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPasswordTool.py", line 291, in test_01_checkPasswordTool
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CheckPasswordToolExists
AddUser
Tic
Logout
CheckUserLogin
CheckUserNotLoginWithBadPassword
TryLostPasswordWithBadUser
Tic
CheckNoMailSent
GoToBadRandomAddress
Tic
CheckUserLogin
CheckUserNotLoginWithBadPassword
LostPassword
Tic
CheckMailSent
> GoToRandomAddress
Tic
CheckUserLoginWithNewPassword
CheckUserNotLoginWithFormerPassword
GoToRandomAddressTwice
Tic
CheckUserLoginWithNewPassword
CheckUserNotLoginWithFormerPassword
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPasswordTool.py", line 188, in stepGoToRandomAddress
password_key=key)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/Tool/PasswordTool.py", line 220, in changeUserPassword
person._Person__setPasswordByForce(password)
AttributeError: _Person__setPasswordByForce
ERROR: test_login_with_trailing_space (testPasswordTool.TestPasswordTool)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPasswordTool.py", line 435, in test_login_with_trailing_space
password_key=key_a)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/Tool/PasswordTool.py", line 220, in changeUserPassword
person._Person__setPasswordByForce(password)
AttributeError: _Person__setPasswordByForce
ERROR: test_two_concurrent_password_reset (testPasswordTool.TestPasswordTool)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPasswordTool.py", line 378, in test_two_concurrent_password_reset
password_key=key_a)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/Tool/PasswordTool.py", line 220, in changeUserPassword
person._Person__setPasswordByForce(password)
AttributeError: _Person__setPasswordByForce
ERROR: test_01_checkPasswordTool (testPasswordTool.TestPasswordToolWithCRM)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPasswordTool.py", line 291, in test_01_checkPasswordTool
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CheckPasswordToolExists
AddUser
Tic
Logout
CheckUserLogin
CheckUserNotLoginWithBadPassword
TryLostPasswordWithBadUser
Tic
CheckNoMailSent
GoToBadRandomAddress
Tic
CheckUserLogin
CheckUserNotLoginWithBadPassword
LostPassword
Tic
CheckMailSent
> GoToRandomAddress
Tic
CheckUserLoginWithNewPassword
CheckUserNotLoginWithFormerPassword
GoToRandomAddressTwice
Tic
CheckUserLoginWithNewPassword
CheckUserNotLoginWithFormerPassword
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPasswordTool.py", line 188, in stepGoToRandomAddress
password_key=key)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/Tool/PasswordTool.py", line 220, in changeUserPassword
person._Person__setPasswordByForce(password)
AttributeError: _Person__setPasswordByForce
ERROR: test_login_with_trailing_space (testPasswordTool.TestPasswordToolWithCRM)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPasswordTool.py", line 435, in test_login_with_trailing_space
password_key=key_a)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/Tool/PasswordTool.py", line 220, in changeUserPassword
person._Person__setPasswordByForce(password)
AttributeError: _Person__setPasswordByForce
ERROR: test_two_concurrent_password_reset (testPasswordTool.TestPasswordToolWithCRM)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPasswordTool.py", line 378, in test_two_concurrent_password_reset
password_key=key_a)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/Tool/PasswordTool.py", line 220, in changeUserPassword
person._Person__setPasswordByForce(password)
AttributeError: _Person__setPasswordByForce
FAIL: test checking if the field values are of the proper type.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/Formulator/tests/testSerializeForm.py", line 358, in test_fieldValueTypes
self.assertEquals(field.values, field2.values)
AssertionError: {'alternate_name': '', 'title': 'Test Title', 'date_separator': '', 'editable': 0, 'input_order': 'mdy', 'start_datetime': None, 'description': '', 'default_now': 0, 'allow_empty_time': 0, 'ampm_time_style': 0, 'hide_day': 0, 'date_only': 0, 'time_separator': '$', 'hidden': 0, 'default': None, 'css_class': 'test_css', 'required': 1, 'enabled': 1, 'input_style': 'list', 'external_validator': '', 'hidden_day_is_last_day': 0, 'end_datetime': None, 'timezone_style': 0} != {'alternate_name': '', 'title': 'Test Title', 'date_separator': '', 'editable': 0, 'input_order': 'mdy', 'start_datetime': '', 'description': '', 'default_now': 0, 'allow_empty_time': 0, 'ampm_time_style': 0, 'hide_day': 0, 'date_only': 0, 'time_separator': '$', 'hidden': 0, 'default': '', 'css_class': 'test_css', 'required': 1, 'enabled': 1, 'input_style': 'list', 'external_validator': '', 'hidden_day_is_last_day': 0, 'end_datetime': '', 'timezone_style': 0}
FAIL: test_manyTemplatesWithoutReindexation (testTemplate.TestTemplate), Check what happen when templates are created one by one without reindexation
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testTemplate.py", line 349, in test_manyTemplatesWithoutReindexation
self.assertEqual(len(preference_id_list) + 1, len(new_preference_id_list))
AssertionError: 1 != 2
More information about the Erp5-report
mailing list