[Erp5-report] ERP5 r35471 : 3541 Tests, 6 Errors, 26 Failures, 39 Skips
nobody at svn.erp5.org
nobody at svn.erp5.org
Thu May 20 15:44:30 CEST 2010
Test Suite: ERP5
Revision: 35471
Result: FAIL
All tests: 3541
Failures: 26
Errors: 6
Skips: 39
The following tests failed:
testAlarm (1 failures)
test_18_alarm_activities_execution_order (testAlarm.TestAlarm)
testBusinessTemplate (1 failures, 2 skips)
test_167_InstanceAndRelatedClassDefinedInSameBT (testBusinessTemplate.TestBusinessTemplate)
testDms (2 failures)
test_PDFDocument_asTextConversion (testDms.TestDocument), Test a PDF document with embedded images
test_parallel_conversion (testDms.TestDocument), Check that conversion engine is able to fill in
testDmsWithFlare (1 failures)
test_PDFDocument_asTextConversion (testDmsWithFlare.TestDocumentWithFlare), Test a PDF document with embedded images
testDocumentationHelper (1 errors)
test_04_ODT_style_report (testDocumentationHelper.TestDocumentationHelper), Checks that it is possible to do ODT report
testERP5DocumentSyncML (1 failures)
test_06_UpdateMultiData (testERP5DocumentSyncML.TestERP5DocumentSyncML)
testERP5Simulation (6 failures, 1 skips)
test_03_PackingListChangeStartDate (testERP5Simulation.TestERP5SimulationPackingList)
test_06_SimulationChangeStartDate (testERP5Simulation.TestERP5SimulationPackingList)
test_07_SimulationChangeStartDateWithTwoOrderLine (testERP5Simulation.TestERP5SimulationPackingList)
test_07a_SimulationChangeStartDateWithTwoOrderLine (testERP5Simulation.TestERP5SimulationPackingList)
test_09_InvoiceChangeStartDateFail (testERP5Simulation.TestERP5SimulationInvoice)
test_18_compareInvoiceAndPackingList (testERP5Simulation.TestERP5SimulationInvoice)
testFormPrintoutAsODT (1 failures, 1 skips)
test_02_Table_07_CellFormat (testFormPrintoutAsODT.TestFormPrintoutAsODT), 7. Normal case: make sure that it is enable to use ODF cell format setting in FormPrintout
testICal (1 failures)
test_01_renderEvent (testICal.TestICal)
testIngestionWithFlare (3 errors)
test_05_FormatIngestionImage (testIngestionWithFlare.TestIngestionWithFlare)
test_05_FormatIngestionPDF (testIngestionWithFlare.TestIngestionWithFlare)
test_06_FormatGenerationPdf (testIngestionWithFlare.TestIngestionWithFlare)
testLegacyInvoice (1 failures)
test_Reference (testLegacyInvoice.TestSaleInvoice)
testOOoChart (2 failures)
test_ooo_chart (testOOoChart.TestOOoChart)
test_proxy_ooo_chart (testOOoChart.TestOOoChart)
testOpenOrder (2 failures)
testOpenOrderRule (testOpenOrder.TestOpenOrder)
testPeriodicityDateList (testOpenOrder.TestOpenOrder)
testProxyField (2 errors, 1 skips)
test_proxifyParallelListField (testProxyField.TestProxyField), ParallelListField has its own get_value method and the method does
test_serializeProxyField (testProxyField.TestProxyField), Test formToXML and XMLToForm with proxyfields.
testSerializeForm (1 failures)
test checking if the field values are of the proper type.
testTemplate (3 failures)
test_DeliveryTemplateNotIndexable (testTemplate.TestTemplate)
test_NonDeliveryTemplateNotIndexable (testTemplate.TestTemplate)
test_manyTemplatesWithoutReindexation (testTemplate.TestTemplate), Check what happen when templates are created one by one without reindexation
testTradeModelLine (1 failures)
test_tradeModelLineWithEmptyBaseContributionMovement (testTradeModelLine.TestTradeModelLineSale)
testTradeModelLinePurchase (1 failures)
test_tradeModelLineWithEmptyBaseContributionMovement (testTradeModelLinePurchase.TestTradeModelLinePurchase)
testXHTML (1 failures)
test_configurationOfFieldLibrary (testXHTML.TestXHTML)
The following tests were at least partly skipped:
testBase (3 skips)
test_NonIndexable (testBase.TestBase), check if a document is not indexed where we set isIndexable=0 in the same transaction of newContent(). ... skipped 'isIndexable is not designed to work like tested here, this test must be rewritten once we know how to handle correctly templates'
test_NonIndexable2 (testBase.TestBase), check if a document is not indexed where we call edit() and set isIndexable=0 after it is already indexed. ... skipped 'isIndexable is not designed to work like tested here, this test must be rewritten once we know how to handle correctly templates'
test_NonIndexable3 (testBase.TestBase), check if a document is not indexed where we set isIndexable=0 and call edit() after it is already indexed. ... skipped 'isIndexable is not designed to work like tested here, this test must be rewritten once we know how to handle correctly templates'
testBusinessTemplate (2 skips)
testCMFActivity (1 skips)
testERP5Catalog (3 skips)
test_49_IndexInOrderedSearchFolder (testERP5Catalog.TestERP5Catalog) ... skipped 'TODO ERP5'
test_SubDocumentsWithAcquireLocalRoleSecurityIndexing (testERP5Catalog.TestERP5Catalog) ... skipped 'TODO ERP5'
test_sortOnRelatedKeyWithUnsetRelation (testERP5Catalog.TestERP5Catalog) ... skipped 'TODO ERP5'
testERP5Interfaces (13 skips)
testERP5Simulation (1 skips)
testERP5TypeInterfaces (1 skips)
testFormPrintoutAsODT (1 skips)
test_09_FieldReplacementWithValidation (testFormPrintoutAsODT.TestFormPrintoutAsODT) ... skipped 'Disable validation because OOo does not produce compliant xml, and RelaxNG status is still draft'
testMRP (4 skips)
test_TransformationRule_expand_concurrent (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationRule_expand_reexpand (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationRule_getHeadProductionPathList (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationSourcingRule_expand (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
testProxyField (1 skips)
testSQLCachedWorklist (1 skips)
test_02_related_key (testSQLCachedWorklist.TestSQLCachedWorklist) ... skipped 'TODO ERP5'
testSelectionTool (7 skips)
skipped 'Test to be written'
testPage (testSelectionTool.TestSelectionTool) ... skipped 'Test to be written'
testView (testSelectionTool.TestSelectionTool) ... skipped 'Test to be written'
skipped 'Test to be written'
testDeleteGlobalSelection (testSelectionTool.TestSelectionToolMemcachedStorage) ... skipped 'To be decided if implementation is required'
testPage (testSelectionTool.TestSelectionToolMemcachedStorage) ... skipped 'Test to be written'
testView (testSelectionTool.TestSelectionToolMemcachedStorage) ... skipped 'Test to be written'
testTranslation (1 skips)
-------------- next part --------------
FAIL: test_18_alarm_activities_execution_order (testAlarm.TestAlarm)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAlarm.py", line 601, in test_18_alarm_activities_execution_order
self.assertEqual(expected_tag, m.activity_kw.get('tag'))
AssertionError: 'portal_alarms/18_0' != 'portal_alarms/18_2'
FAIL: test_167_InstanceAndRelatedClassDefinedInSameBT (testBusinessTemplate.TestBusinessTemplate)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 6371, in test_167_InstanceAndRelatedClassDefinedInSameBT
self.assertTrue(getattr(portal.another_file, 'isClassOverriden', False))
AssertionError
FAIL: test_PDFDocument_asTextConversion (testDms.TestDocument), Test a PDF document with embedded images
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1698, in test_PDFDocument_asTextConversion
self.assertEquals(document.asText(), 'ERP5 is a free software.\n')
AssertionError: 'ERP5 is a fra-E suftwara\n' != 'ERP5 is a free software.\n'
FAIL: test_parallel_conversion (testDms.TestDocument), Check that conversion engine is able to fill in
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1640, in test_parallel_conversion
self.assertEquals(result_list, [])
AssertionError: [21, 25] != []
FAIL: test_PDFDocument_asTextConversion (testDmsWithFlare.TestDocumentWithFlare), Test a PDF document with embedded images
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1698, in test_PDFDocument_asTextConversion
self.assertEquals(document.asText(), 'ERP5 is a free software.\n')
AssertionError: 'ERP5 is a fra-E suftwara\n' != 'ERP5 is a free software.\n'
ERROR: test_04_ODT_style_report (testDocumentationHelper.TestDocumentationHelper), Checks that it is possible to do ODT report
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/Products/ERP5Type/tests/testDocumentationHelper.py", line 132, in test_04_ODT_style_report
portal_skin='ODT')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/Form.py", line 639, in __call__
return pt.pt_render(extra_context=extra_context)
File "/usr/lib/erp5/lib/python/Products/PageTemplates/PageTemplate.py", line 104, in pt_render
tal=not source, strictinsert=0)()
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 206, in __call__
self.interpret(self.program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 711, in do_useMacro
self.interpret(macro)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 711, in do_useMacro
self.interpret(macro)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 711, in do_useMacro
self.interpret(macro)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 742, in do_defineSlot
self.interpret(block)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 734, in do_defineSlot
self.interpret(slot)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 734, in do_defineSlot
self.interpret(slot)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 734, in do_defineSlot
self.interpret(slot)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 677, in do_condition
self.interpret(block)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 653, in do_loop_tal
self.interpret(block)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 426, in do_optTag_tal
self.do_optTag(stuff)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 411, in do_optTag
return self.no_tag(start, program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 406, in no_tag
self.interpret(program)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 250, in interpret
handlers[opcode](self, args)
File "/usr/lib/erp5/lib/python/TAL/TALInterpreter.py", line 477, in do_setLocal_tal
self.engine.setLocal(name, self.engine.evaluateValue(expr))
File "/usr/lib/erp5/lib/python/Products/PageTemplates/TALES.py", line 221, in evaluate
return expression(self)
File "/usr/lib/erp5/lib/python/Products/PageTemplates/ZRPythonExpr.py", line 47, in __call__
return eval(code, g, {})
File "Python expression "report_item_list.extend(reportbox.render())"", line 1, in <expression>
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/Formulator/Field.py", line 269, in render
editable=editable,
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/Formulator/Field.py", line 205, in _render_helper
render_prefix=render_prefix)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/ProxyField.py", line 82, in __call__
return proxied_method(field, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/ReportBox.py", line 58, in render_view
return self.render(field, key, value, REQUEST)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/ReportBox.py", line 71, in render
return report_method()
File "/usr/lib/erp5/lib/python/Shared/DC/Scripts/Bindings.py", line 311, in __call__
return self._bindAndExec(args, kw, None)
File "/usr/lib/erp5/lib/python/Shared/DC/Scripts/Bindings.py", line 348, in _bindAndExec
return self._exec(bound_data, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1248, in _exec
return PythonScript_exec(self, *args)
File "/usr/lib/erp5/lib/python/Products/PythonScripts/PythonScript.py", line 325, in _exec
result = f(*args, **kw)
File "Script (Python)", line 27, in DocumentationHelper_getDocumentationSectionList
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/Tool/ClassTool.py", line 124, in getDocumentationHelper
class_object = getattr(DocumentationHelper, class_name)
TypeError: getattr(): attribute name must be string
FAIL: test_06_UpdateMultiData (testERP5DocumentSyncML.TestERP5DocumentSyncML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5SyncML/tests/testERP5DocumentSyncML.py", line 800, in test_06_UpdateMultiData
self.checkSynchronizationStateIsSynchronized()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5SyncML/tests/testERP5DocumentSyncML.py", line 433, in checkSynchronizationStateIsSynchronized
self.assertEqual(state[1], state[0].SYNCHRONIZED)
AssertionError: 409 != 1
FAIL: test_03_PackingListChangeStartDate (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1011, in test_03_PackingListChangeStartDate
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
CheckPackingListIsNotDivergent
CheckOrderPackingList
ChangePackingListStartDate
CheckPackingListIsCalculating
Tic
CheckPackingListIsDiverged
UnifyStartDateWithDecision
Tic
CheckPackingListIsSolved
CheckPackingListIsNotDivergent
> CheckSimulationStartDateUpdated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 433, in stepCheckSimulationStartDateUpdated
self.assertEquals(simulation_movement.getStartDate(),self.datetime + 15)
AssertionError: DateTime('2010/05/30 06:39:04.476 GMT-4') != DateTime('2010/06/04 06:39:04.476 GMT-4')
FAIL: test_06_SimulationChangeStartDate (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1189, in test_06_SimulationChangeStartDate
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
CheckPackingListIsNotDivergent
CheckOrderPackingList
ModifySimulationLineStartDate
Tic
CheckPackingListIsDiverged
UnifyStartDateWithPrevision
Tic
CheckPackingListIsSolved
> CheckNewPackingListAfterStartDateAdopt
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 736, in stepCheckNewPackingListAfterStartDateAdopt
self.assertEquals(packing_list.getStartDate(),self.datetime+15)
AssertionError: DateTime('2010/05/30 06:39:04.476 GMT-4') != DateTime('2010/06/04 06:39:04.476 GMT-4')
FAIL: test_07_SimulationChangeStartDateWithTwoOrderLine (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1210, in test_07_SimulationChangeStartDateWithTwoOrderLine
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
CheckPackingListIsNotDivergent
CheckOrderPackingList
ModifySimulationLineStartDate
Tic
CheckPackingListIsDiverged
CheckPackingListIsDivergent
UnifyStartDateWithPrevision
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
> CheckNewPackingListAfterStartDateAdopt
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 736, in stepCheckNewPackingListAfterStartDateAdopt
self.assertEquals(packing_list.getStartDate(),self.datetime+15)
AssertionError: DateTime('2010/05/30 06:39:04.476 GMT-4') != DateTime('2010/06/04 06:39:04.476 GMT-4')
FAIL: test_07a_SimulationChangeStartDateWithTwoOrderLine (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1231, in test_07a_SimulationChangeStartDateWithTwoOrderLine
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
CheckPackingListIsNotDivergent
CheckOrderPackingList
ModifyOneSimulationLineStartDate
Tic
CheckPackingListIsDiverged
CheckPackingListIsDivergent
UnifyStartDateWithPrevision
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
> CheckNewPackingListAfterStartDateAdopt
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 736, in stepCheckNewPackingListAfterStartDateAdopt
self.assertEquals(packing_list.getStartDate(),self.datetime+15)
AssertionError: DateTime('2010/05/30 06:39:04.476 GMT-4') != DateTime('2010/06/04 06:39:04.476 GMT-4')
FAIL: test_09_InvoiceChangeStartDateFail (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2828, in test_09_InvoiceChangeStartDateFail
self.playSequence(sequence, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
ChangeInvoiceStartDate
CheckInvoiceIsDivergent
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
UnifyStartDateWithDecisionInvoice
Tic
CheckInvoiceNotSplitted
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
> CheckPackingListIsDivergent
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 189, in stepCheckPackingListIsDivergent
self.assertTrue(packing_list.isDivergent())
AssertionError
FAIL: test_18_compareInvoiceAndPackingList (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 3400, in test_18_compareInvoiceAndPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
CheckInvoicesConsistency
> CheckPackingListInvoice
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 608, in stepCheckPackingListInvoice
self.assertEquals(packing_list.getSource(), invoice.getSource())
AssertionError: 'organisation_module/144' != 'organisation_module/146'
FAIL: test_02_Table_07_CellFormat (testFormPrintoutAsODT.TestFormPrintoutAsODT), 7. Normal case: make sure that it is enable to use ODF cell format setting in FormPrintout
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5OOo/tests/testFormPrintoutAsODT.py", line 633, in test_02_Table_07_CellFormat
self.assertEqual(date_column.attrib[date_value_attrib], '2009-04-20')
AssertionError: '2009-04-19' != '2009-04-20'
FAIL: test_01_renderEvent (testICal.TestICal)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testICal.py", line 151, in test_01_renderEvent
self.assertEquals( # if this fail for you, try to set $TZ to Europe/Paris
AssertionError: '20070815T143000Z' != '20070815T083000Z'
ERROR: test_05_FormatIngestionImage (testIngestionWithFlare.TestIngestionWithFlare)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testIngestion.py", line 1167, in test_05_FormatIngestionImage
self.playSequence(step_list, quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testIngestion.py", line 928, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CleanUp
CreateImageDocument
> IngestImageFormats
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testIngestion.py", line 742, in stepIngestImageFormats
self.ingestFormatList('six', format_list, 'Image')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testIngestion.py", line 295, in ingestFormatList
document.edit(file=f)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/Base.py", line 238, in __call__
result = apply(self.__dict__['_m'], (instance,) + args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/File.py", line 106, in _edit
self._setFile(file, precondition=precondition)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/Base.py", line 253, in __call__
wf[wf_id].notifySuccess(instance, transition_list, result, args=args, kw=kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/InteractionWorkflow.py", line 302, in notifySuccess
script(sci) # May throw an exception
File "/usr/lib/erp5/lib/python/Shared/DC/Scripts/Bindings.py", line 311, in __call__
return self._bindAndExec(args, kw, None)
File "/usr/lib/erp5/lib/python/Shared/DC/Scripts/Bindings.py", line 348, in _bindAndExec
return self._exec(bound_data, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1248, in _exec
return PythonScript_exec(self, *args)
File "/usr/lib/erp5/lib/python/Products/PythonScripts/PythonScript.py", line 325, in _exec
result = f(*args, **kw)
File "Script (Python)", line 4, in updateContentMd5
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/mixin/cached_convertable.py", line 239, in updateContentMd5
mime, data = self.convert(None)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/Image.py", line 353, in convert
return mime, image.data
AttributeError: 'str' object has no attribute 'data'
ERROR: test_05_FormatIngestionPDF (testIngestionWithFlare.TestIngestionWithFlare)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testIngestion.py", line 1158, in test_05_FormatIngestionPDF
self.playSequence(step_list, quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testIngestion.py", line 928, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CleanUp
CreatePDFDocument
> IngestPDFFormats
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testIngestion.py", line 735, in stepIngestPDFFormats
self.ingestFormatList('five', format_list)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testIngestion.py", line 295, in ingestFormatList
document.edit(file=f)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/Base.py", line 238, in __call__
result = apply(self.__dict__['_m'], (instance,) + args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/File.py", line 106, in _edit
self._setFile(file, precondition=precondition)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/Base.py", line 253, in __call__
wf[wf_id].notifySuccess(instance, transition_list, result, args=args, kw=kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/InteractionWorkflow.py", line 302, in notifySuccess
script(sci) # May throw an exception
File "/usr/lib/erp5/lib/python/Shared/DC/Scripts/Bindings.py", line 311, in __call__
return self._bindAndExec(args, kw, None)
File "/usr/lib/erp5/lib/python/Shared/DC/Scripts/Bindings.py", line 348, in _bindAndExec
return self._exec(bound_data, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1248, in _exec
return PythonScript_exec(self, *args)
File "/usr/lib/erp5/lib/python/Products/PythonScripts/PythonScript.py", line 325, in _exec
result = f(*args, **kw)
File "Script (Python)", line 4, in updateContentMd5
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/mixin/cached_convertable.py", line 239, in updateContentMd5
mime, data = self.convert(None)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/PDFDocument.py", line 92, in convert
return Image.convert(self, format, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/Image.py", line 353, in convert
return mime, image.data
AttributeError: 'str' object has no attribute 'data'
ERROR: test_06_FormatGenerationPdf (testIngestionWithFlare.TestIngestionWithFlare)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testIngestion.py", line 1218, in test_06_FormatGenerationPdf
self.playSequence(step_list, quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testIngestion.py", line 928, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CleanUp
CreatePDFDocument
> ExportPDF
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testIngestion.py", line 762, in stepExportPDF
document.edit(file=f)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/Base.py", line 238, in __call__
result = apply(self.__dict__['_m'], (instance,) + args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/File.py", line 106, in _edit
self._setFile(file, precondition=precondition)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/Base.py", line 253, in __call__
wf[wf_id].notifySuccess(instance, transition_list, result, args=args, kw=kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/InteractionWorkflow.py", line 302, in notifySuccess
script(sci) # May throw an exception
File "/usr/lib/erp5/lib/python/Shared/DC/Scripts/Bindings.py", line 311, in __call__
return self._bindAndExec(args, kw, None)
File "/usr/lib/erp5/lib/python/Shared/DC/Scripts/Bindings.py", line 348, in _bindAndExec
return self._exec(bound_data, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1248, in _exec
return PythonScript_exec(self, *args)
File "/usr/lib/erp5/lib/python/Products/PythonScripts/PythonScript.py", line 325, in _exec
result = f(*args, **kw)
File "Script (Python)", line 4, in updateContentMd5
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/mixin/cached_convertable.py", line 239, in updateContentMd5
mime, data = self.convert(None)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/PDFDocument.py", line 92, in convert
return Image.convert(self, format, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/Image.py", line 353, in convert
return mime, image.data
AttributeError: 'str' object has no attribute 'data'
FAIL: test_Reference (testLegacyInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Legacy/tests/testLegacyInvoice.py", line 3299, in test_Reference
self.assertEquals('1', invoice.getReference())
AssertionError: '1' != '5'
FAIL: test_ooo_chart (testOOoChart.TestOOoChart)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/tests/testOOoChart.py", line 183, in test_ooo_chart
self.assertEquals(HTTP_OK, response.getStatus(), '%s rendering failed: %s' % (image_format, response.getStatus()))
AssertionError: jpeg rendering failed: 500
FAIL: test_proxy_ooo_chart (testOOoChart.TestOOoChart)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/tests/testOOoChart.py", line 245, in test_proxy_ooo_chart
self.assertEquals('inline', content_disposition.split(';')[0])
AssertionError: 'inline' != 'attachment'
FAIL: testOpenOrderRule (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 303, in testOpenOrderRule
[(DateTime(3000,2,10,10,0), DateTime(3000,2,11,10,0)),
AssertionError: [(DateTime('3000/02/10 10:00:00 US/Eastern'), DateTime('3000/02/11 10:00:00 US/Eastern')), (DateTime('3000/02/17 10:00:00 US/Eastern'), DateTime('3000/02/18 10:00:00 US/Eastern')), (DateTime('3000/02/24 10:00:00 US/Eastern'), DateTime('3000/02/25 10:00:00 US/Eastern')), (DateTime('3000/03/03 10:00:00 US/Eastern'), DateTime('3000/03/04 10:00:00 US/Eastern')), (DateTime('3000/03/10 10:00:00 US/Eastern'), DateTime('3000/03/11 10:00:00 US/Eastern'))] != [(DateTime('3000/02/10 10:00:00 US/Eastern'), DateTime('3000/02/11 10:00:00 US/Eastern')), (DateTime('3000/02/17 10:00:00 US/Eastern'), DateTime('3000/02/18 10:00:00 US/Eastern')), (DateTime('3000/02/24 10:00:00 US/Eastern'), DateTime('3000/02/25 10:00:00 US/Eastern')), (DateTime('3000/03/03 10:00:00 US/Eastern'), DateTime('3000/03/04 10:00:00 US/Eastern')), (DateTime('3000/03/10 10:00:00 GMT-4'), DateTime('3000/03/11 10:00:00 GMT-4'))]
FAIL: testPeriodicityDateList (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 185, in testPeriodicityDateList
[(D(2008,2,1,0,1), DateTime(2008,2,29)),
AssertionError: [(DateTime('2008/02/01 00:01:00 US/Eastern'), DateTime('2008/02/29')), (DateTime('2008/03/01 00:01:00 US/Eastern'), DateTime('2008/03/31')), (DateTime('2008/04/01 00:01:00 US/Eastern'), DateTime('2008/04/30')), (DateTime('2008/05/01 00:01:00 US/Eastern'), DateTime('2008/05/31')), (DateTime('2008/06/01 00:01:00 US/Eastern'), DateTime('2008/06/30')), (DateTime('2008/07/01 00:01:00 US/Eastern'), DateTime('2008/07/31')), (DateTime('2008/08/01 00:01:00 US/Eastern'), DateTime('2008/08/31')), (DateTime('2008/09/01 00:01:00 US/Eastern'), DateTime('2008/09/30')), (DateTime('2008/10/01 00:01:00 US/Eastern'), DateTime('2008/10/31')), (DateTime('2008/11/01 00:01:00 US/Eastern'), DateTime('2008/11/30'))] != [(DateTime('2008/02/01 00:01:00 US/Eastern'), DateTime('2008/02/29')), (DateTime('2008/03/01 00:01:00 US/Eastern'), DateTime('2008/03/31')), (DateTime('2008/04/01 00:01:00 GMT-4'), DateTime('2008/04/30')), (DateTime('2008/05/01 00:01:00 GMT-4'), DateTime('2008/05/31')), (DateTime('2008/06/01 00:01:00 GMT-4'), DateTime('2008/06/30')), (DateTime('2008/07/01 00:01:00 GMT-4'), DateTime('2008/07/31')), (DateTime('2008/08/01 00:01:00 GMT-4'), DateTime('2008/08/31')), (DateTime('2008/09/01 00:01:00 GMT-4'), DateTime('2008/09/30')), (DateTime('2008/10/01 00:01:00 GMT-4'), DateTime('2008/10/31')), (DateTime('2008/11/01 00:01:00 GMT-4'), DateTime('2008/11/30'))]
ERROR: test_proxifyParallelListField (testProxyField.TestProxyField), ParallelListField has its own get_value method and the method does
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Form/tests/testProxyField.py", line 325, in test_proxifyParallelListField
portal_skins.manage_addProduct['OFSP'].manage_addFolder('erp5_geek')
File "/usr/lib/erp5/lib/python/OFS/Folder.py", line 43, in manage_addFolder
self._setObject(id, ob)
File "/usr/lib/erp5/lib/python/OFS/ObjectManager.py", line 281, in _setObject
v=self._checkId(id)
File "/usr/lib/erp5/lib/python/OFS/ObjectManager.py", line 84, in checkValidId
raise BadRequest, (
BadRequest: The id "erp5_geek" is invalid - it is already in use.
ERROR: test_serializeProxyField (testProxyField.TestProxyField), Test formToXML and XMLToForm with proxyfields.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Form/tests/testProxyField.py", line 271, in test_serializeProxyField
portal_skins.manage_addProduct['OFSP'].manage_addFolder('erp5_geek')
File "/usr/lib/erp5/lib/python/OFS/Folder.py", line 43, in manage_addFolder
self._setObject(id, ob)
File "/usr/lib/erp5/lib/python/OFS/ObjectManager.py", line 281, in _setObject
v=self._checkId(id)
File "/usr/lib/erp5/lib/python/OFS/ObjectManager.py", line 84, in checkValidId
raise BadRequest, (
BadRequest: The id "erp5_geek" is invalid - it is already in use.
FAIL: test checking if the field values are of the proper type.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/Formulator/tests/testSerializeForm.py", line 358, in test_fieldValueTypes
self.assertEquals(field.values, field2.values)
AssertionError: {'alternate_name': '', 'title': 'Test Title', 'date_separator': '', 'editable': 0, 'input_order': 'mdy', 'start_datetime': None, 'description': '', 'default_now': 0, 'allow_empty_time': 0, 'ampm_time_style': 0, 'hide_day': 0, 'date_only': 0, 'time_separator': '$', 'hidden': 0, 'default': None, 'css_class': 'test_css', 'required': 1, 'enabled': 1, 'input_style': 'list', 'external_validator': '', 'hidden_day_is_last_day': 0, 'end_datetime': None, 'timezone_style': 0} != {'alternate_name': '', 'title': 'Test Title', 'date_separator': '', 'editable': 0, 'input_order': 'mdy', 'start_datetime': '', 'description': '', 'default_now': 0, 'allow_empty_time': 0, 'ampm_time_style': 0, 'hide_day': 0, 'date_only': 0, 'time_separator': '$', 'hidden': 0, 'default': '', 'css_class': 'test_css', 'required': 1, 'enabled': 1, 'input_style': 'list', 'external_validator': '', 'hidden_day_is_last_day': 0, 'end_datetime': '', 'timezone_style': 0}
FAIL: test_DeliveryTemplateNotIndexable (testTemplate.TestTemplate)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testTemplate.py", line 337, in test_DeliveryTemplateNotIndexable
self._testTemplateNotIndexable(document)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testTemplate.py", line 327, in _testTemplateNotIndexable
self.assertEqual(len(preference.objectIds()), 2)
AssertionError: 1 != 2
FAIL: test_NonDeliveryTemplateNotIndexable (testTemplate.TestTemplate)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testTemplate.py", line 345, in test_NonDeliveryTemplateNotIndexable
self._testTemplateNotIndexable(document)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testTemplate.py", line 315, in _testTemplateNotIndexable
self.assertEquals(0, len(self.portal.portal_catalog(uid=template.getUid())))
AssertionError: 0 != 1
FAIL: test_manyTemplatesWithoutReindexation (testTemplate.TestTemplate), Check what happen when templates are created one by one without reindexation
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testTemplate.py", line 279, in test_manyTemplatesWithoutReindexation
self.assertEqual(len(preference_id_list) + 1, len(new_preference_id_list))
AssertionError: 1 != 2
FAIL: test_tradeModelLineWithEmptyBaseContributionMovement (testTradeModelLine.TestTradeModelLineSale)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2780, in test_tradeModelLineWithEmptyBaseContributionMovement
set(amount_list[0].getCausalityValueList()))
AssertionError: set([<OrderLine at /erp5_portal_0a05603bfed6536a32aab832aba00443/sale_order_module/23/1>]) != set([<OrderLine at /erp5_portal_0a05603bfed6536a32aab832aba00443/sale_order_module/23/2>, <OrderLine at /erp5_portal_0a05603bfed6536a32aab832aba00443/sale_order_module/23/1>])
FAIL: test_tradeModelLineWithEmptyBaseContributionMovement (testTradeModelLinePurchase.TestTradeModelLinePurchase)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2780, in test_tradeModelLineWithEmptyBaseContributionMovement
set(amount_list[0].getCausalityValueList()))
AssertionError: set([<OrderLine at /erp5_portal_b7fb638aeaaf7a9592288eb8d88d57d4/purchase_order_module/23/1>]) != set([<OrderLine at /erp5_portal_b7fb638aeaaf7a9592288eb8d88d57d4/purchase_order_module/23/2>, <OrderLine at /erp5_portal_b7fb638aeaaf7a9592288eb8d88d57d4/purchase_order_module/23/1>])
FAIL: test_configurationOfFieldLibrary (testXHTML.TestXHTML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testXHTML.py", line 204, in test_configurationOfFieldLibrary
self.fail(message)
AssertionError: 16 fields to modify
erp5_trade/SaleOrder_viewSaleOrderFastInputDialog/listbox_getAvailableInventory: To be proxified
erp5_trade/SaleOrder_viewSaleOrderFastInputDialog/listbox_getCurrentInventory: To be proxified
erp5_trade/SalePackingList_viewSalePackingListFastInputDialog/listbox_getAvailableInventory: To be proxified
erp5_trade/SalePackingList_viewSalePackingListFastInputDialog/listbox_getCurrentInventory: To be proxified
erp5_trade/Base_viewTradeFieldLibrary/my_view_mode_test_method_id: Unused Proxy Field
erp5_trade/ContainerLine_viewQuantity/matrixbox: Unproxify Field
erp5_trade/DeliveryLine_viewIndustrialPhase/matrixbox: Unproxify Field
erp5_trade/DeliveryLine_viewPrice/matrixbox: Unproxify Field
erp5_trade/DeliveryLine_viewQuantity/matrixbox: Unproxify Field
erp5_trade/DeliveryModule_viewDeliveryLineReport/your_reportbox: Unproxify Field
erp5_trade/InventoryLine_viewInventory/matrixbox: Unproxify Field
erp5_trade/InventoryLine_viewPrice/matrixbox: Unproxify Field
erp5_trade/OrderLine_view/my_int_index: Unproxify Field
erp5_trade/OrderModule_viewOrderReport/your_report_box: Unproxify Field
erp5_trade/SaleOrder_viewPlanning/planning_box: Unproxify Field
erp5_trade/SaleTradeCondition_view/my_version: Unproxify Field
More information about the Erp5-report
mailing list