[Erp5-report] ERP5 r31133: 2975 Tests, 19 Errors, 34 Failures, 18 Skips
nobody at svn.erp5.org
nobody at svn.erp5.org
Tue Dec 8 09:19:50 CET 2009
Test Suite: ERP5
Revision: 31133
Result: FAIL
All tests: 2975
Failures: 34
Errors: 19
Skips: 18
The following tests failed:
testApparelModel (1 failures)
test_checkCopyComposition (testApparelModel.TestApparelModel)
testBPMCore (1 failures)
test_BusinessProcess_getPathValueList (testBPMCore.TestBPMImplementation)
testBusinessTemplate (1 errors)
test_download_svn (testBusinessTemplate.TestBusinessTemplate)
testCalendar (10 failures, 1 errors)
test_PersonModule_viewLeaveRequestReport (testCalendar.TestCalendar)
test_03_getAvailableTime (testCalendar.TestCalendar)
test_2ConsecutiveLeaveRequestOverlappingAfterGroupCalendar (testCalendar.TestCalendar)
test_2LeaveRequestOverlappingAfterGroupCalendar (testCalendar.TestCalendar)
test_2OverlappedLeaveRequestOverlappingAfterGroupCalendar (testCalendar.TestCalendar)
test_LeaveRequestOverlappingAfterGroupCalendar (testCalendar.TestCalendar)
test_LeaveRequestOverlappingBeforeGroupCalendar (testCalendar.TestCalendar)
test_LeaveRequestOverlappingGroupCalendar (testCalendar.TestCalendar)
test_LeaveRequestWithSameDateAsGroupCalendar (testCalendar.TestCalendar)
test_LeaveRequestWithSameDateAsRepeatedGroupCalendar (testCalendar.TestCalendar)
test_SimpleLeaveRequestWithSameDateAsGroupCalendar (testCalendar.TestCalendar)
testDateUtils (1 failures)
test_atTheEndOfPeriod (testDateUtils.TestDateUtils)
testDms (1 errors)
test_Base_createNewFile_empty (testDms.TestDocument)
testDmsWithFlare (1 errors)
test_Base_createNewFile_empty (testDmsWithFlare.TestDocumentWithFlare)
testERP5Catalog (2 failures, 3 skips)
test_42_SearchableText (testERP5Catalog.TestERP5Catalog), Tests SearchableText is working in ERP5Catalog
test_complex_query (testERP5Catalog.TestERP5Catalog)
testERP5Interfaces (14 errors)
test_Products.ERP5.AggregatedAmountList_AggregatedAmountList_implements_IAmountList (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.BusinessPath_BusinessPath_implements_IBusinessPath (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.BusinessPath_BusinessPath_implements_ICategoryAccessProvider (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.Document_Document_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.EmailDocument_EmailDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.Event_Event_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.File_File_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.Image_Image_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.OOoDocument_OOoDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TextDocument_TextDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TradeCondition_TradeCondition_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TradeModelRule_TradeModelRule_implements_IRule (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TransformationRule_TransformationRule_implements_IRule (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.Transformation_Transformation_implements_IVariated (testERP5Interfaces.TestERP5Interfaces)
testERP5TypeInterfaces (1 errors)
test_Products.ERP5Type.ConsistencyMessage_ConsistencyMessage_implements_IConsistencyMessage (testERP5TypeInterfaces.TestERP5TypeInterfaces)
testFormPrintout (1 failures)
test_02_Table_07_CellFormat (testFormPrintout.TestFormPrintout), 7. Normal case: cell format cetting
testICal (1 failures)
test_01_renderEvent (testICal.TestICal)
testOpenOrder (2 failures)
testOpenOrderRule (testOpenOrder.TestOpenOrder)
testPeriodicityDateList (testOpenOrder.TestOpenOrder)
testPayroll (3 failures)
test_modelDateValidity (testPayroll.TestPayroll), check that model effective_date and expiration_date are take into
test_modelWithoutDateValidity (testPayroll.TestPayroll), Check that if no DATE are defined on a model, the behavior is that
test_modelWithoutReferenceValidity (testPayroll.TestPayroll), Check that if no REFERENCE are defined on a model, the behavior is
testProxyField (1 failures)
testSkinSelectionTemplateField (testProxyField.TestProxyField)
testResource (1 failures)
test_11_getPriceWithDestinationSection (testResource.TestResource)
testSerializeForm (1 failures)
test checking if the field values are of the proper type.
testTemplate (2 failures)
test_NonDeliveryTemplateNotIndexable (testTemplate.TestTemplate)
test_manyTemplatesWithoutReindexation (testTemplate.TestTemplate), Check what happen when templates are created one by one without reindexation
testTradeModelLine (4 failures)
test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving (testTradeModelLine.TestTradeModelLineSale), Check that after changing invoice line invoice is properly diverged and it is possible to solve
test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio (testTradeModelLine.TestTradeModelLineSale), Check building invoice after splitting packing list using different ratio
test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving (testTradeModelLine.TestTradeModelLinePurchase), Check that after changing invoice line invoice is properly diverged and it is possible to solve
test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio (testTradeModelLine.TestTradeModelLinePurchase), Check building invoice after splitting packing list using different ratio
testXHTML (2 failures)
test.erp5_dms.Drawing.OOoDocument_viewAsWeb (testXHTML.TestXHTML)
test.erp5_dms.Presentation.OOoDocument_viewAsWeb (testXHTML.TestXHTML)
testXMLMatrix (1 failures)
test_9999_SetCellRangeAndCatalogWithoutActivities (testXMLMatrix.TestXMLMatrix)
The following tests were at least partly skipped:
testBase (3 skips)
testMRP (4 skips)
testSQLCachedWorklist (1 skips)
testSelectionTool (7 skips)
-------------- next part --------------
FAIL: test_checkCopyComposition (testApparelModel.TestApparelModel)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testApparelModel.py", line 135, in test_checkCopyComposition
'Mapped Value')), 2)
AssertionError: 0 != 2
FAIL: test_BusinessProcess_getPathValueList (testBPMCore.TestBPMImplementation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testBPMCore.py", line 250, in test_BusinessProcess_getPathValueList
business_process.getPathValueList(trade_phase='default/delivery')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 712, in failIfDifferentSet
self.failUnless(i in b, msg)
AssertionError: (<BusinessPath at /erp5_portal_f0cd414da2d9e3af83e3ad3f3fa340b8/business_process_module/8/2>, <BusinessPath at /erp5_portal_f0cd414da2d9e3af83e3ad3f3fa340b8/business_process_module/8/3>) != [<BusinessPath at /erp5_portal_f0cd414da2d9e3af83e3ad3f3fa340b8/business_process_module/8/2>]
ERROR: test_download_svn (testBusinessTemplate.TestBusinessTemplate)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 4784, in test_download_svn
test_web = self.portal.portal_templates.download(
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/Tool/TemplateTool.py", line 393, in download
bt = self._download_url(url, id)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/Tool/TemplateTool.py", line 339, in _download_url
file_path, headers = urlretrieve(url, temppath)
File "/usr/lib64/python2.4/urllib.py", line 89, in urlretrieve
return _urlopener.retrieve(url, filename, reporthook, data)
File "/usr/lib64/python2.4/urllib.py", line 222, in retrieve
fp = self.open(url, data)
File "/usr/lib64/python2.4/urllib.py", line 190, in open
return getattr(self, name)(url)
File "/usr/lib64/python2.4/site-packages/M2Crypto/m2urllib.py", line 58, in open_https
h.endheaders()
File "/usr/lib64/python2.4/httplib.py", line 798, in endheaders
self._send_output()
File "/usr/lib64/python2.4/httplib.py", line 679, in _send_output
self.send(msg)
File "/usr/lib64/python2.4/httplib.py", line 646, in send
self.connect()
File "/usr/lib64/python2.4/site-packages/M2Crypto/httpslib.py", line 47, in connect
self.sock.connect((self.host, self.port))
File "/usr/lib64/python2.4/site-packages/M2Crypto/SSL/Connection.py", line 157, in connect
if not check(self.get_peer_cert(), self.addr[0]):
File "/usr/lib64/python2.4/site-packages/M2Crypto/SSL/Checker.py", line 59, in __call__
raise NoCertificate('peer did not return certificate')
NoCertificate: peer did not return certificate
ERROR: test_PersonModule_viewLeaveRequestReport (testCalendar.TestCalendar)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testCalendar.py", line 1428, in test_PersonModule_viewLeaveRequestReport
line_list = self.getListBoxLineList(report_section_list[0])
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1117, in getListBoxLineList
REQUEST=self.portal.REQUEST)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/ProxyField.py", line 738, in get_value
return proxy_field.get_value(id, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/ListBox.py", line 2750, in get_value
render_prefix=kw.get('render_prefix'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/ListBox.py", line 448, in render
return renderer()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/ListBox.py", line 1948, in __call__
return self.render(**kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/ListBox.py", line 2495, in render
for line in self.query():
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/ListBox.py", line 1869, in query
report_section_list = self.getReportSectionList()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/ListBox.py", line 1844, in getReportSectionList
object_list = selection(method=domain_list_method, context=domain_context, REQUEST=self.request)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/Selection.py", line 219, in __call__
result = method(**kw)
File "/usr/lib/erp5/lib/python/Shared/DC/Scripts/Bindings.py", line 311, in __call__
return self._bindAndExec(args, kw, None)
File "/usr/lib/erp5/lib/python/Shared/DC/Scripts/Bindings.py", line 348, in _bindAndExec
return self._exec(bound_data, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1180, in _exec
return PythonScript_exec(self, *args)
File "/usr/lib/erp5/lib/python/Products/PythonScripts/PythonScript.py", line 325, in _exec
result = f(*args, **kw)
File "Script (Python)", line 52, in PersonModule_getLeaveRequestReportLineList
TypeError: unsupported operand type(s) for -: 'str' and 'str'
FAIL: test_03_getAvailableTime (testCalendar.TestCalendar)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testCalendar.py", line 606, in test_03_getAvailableTime
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 165, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 110, in play
step.play(context, sequence=self, quiet=quiet)
Current Sequence:
CreatePerson
CreateGroupCalendar
SetGroupCalendarSource
CreateGroupPresencePeriod
SetGroupPresencePeriodValues
Tic
SetGroupPresencePeriodToCheck
SetGroupPresencePeriodDates
SetGroupPresencePeriodPerStopDate
ConfirmActionGroupCalendar
Tic
CheckCatalogued
> CheckGetTimeAvailability
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testCalendar.py", line 458, in stepCheckGetTimeAvailability
to_date=stop_date))
AssertionError: 43200 != '43200'
FAIL: test_2ConsecutiveLeaveRequestOverlappingAfterGroupCalendar (testCalendar.TestCalendar)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testCalendar.py", line 1278, in test_2ConsecutiveLeaveRequestOverlappingAfterGroupCalendar
to_date=DateTime(2008, 1, 1).latestTime()))
AssertionError: 28800 != '28800'
FAIL: test_2LeaveRequestOverlappingAfterGroupCalendar (testCalendar.TestCalendar)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testCalendar.py", line 1219, in test_2LeaveRequestOverlappingAfterGroupCalendar
to_date=DateTime(2008, 1, 1).latestTime()))
AssertionError: 28800 != '28800'
FAIL: test_2OverlappedLeaveRequestOverlappingAfterGroupCalendar (testCalendar.TestCalendar)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testCalendar.py", line 1335, in test_2OverlappedLeaveRequestOverlappingAfterGroupCalendar
to_date=DateTime(2008, 1, 1).latestTime()))
AssertionError: 28800 != '28800'
FAIL: test_LeaveRequestOverlappingAfterGroupCalendar (testCalendar.TestCalendar)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testCalendar.py", line 1164, in test_LeaveRequestOverlappingAfterGroupCalendar
to_date=DateTime(2008, 1, 1).latestTime()))
AssertionError: 32400 != '32400'
FAIL: test_LeaveRequestOverlappingBeforeGroupCalendar (testCalendar.TestCalendar)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testCalendar.py", line 1115, in test_LeaveRequestOverlappingBeforeGroupCalendar
to_date=DateTime(2008, 1, 1).latestTime()))
AssertionError: 32400 != '32400'
FAIL: test_LeaveRequestOverlappingGroupCalendar (testCalendar.TestCalendar)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testCalendar.py", line 1030, in test_LeaveRequestOverlappingGroupCalendar
to_date=DateTime(2008, 1, 1).latestTime()))
AssertionError: 36000 != '36000'
FAIL: test_LeaveRequestWithSameDateAsGroupCalendar (testCalendar.TestCalendar)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testCalendar.py", line 893, in test_LeaveRequestWithSameDateAsGroupCalendar
to_date=DateTime(2008, 1, 1).latestTime()))
AssertionError: 28800 != '28800'
FAIL: test_LeaveRequestWithSameDateAsRepeatedGroupCalendar (testCalendar.TestCalendar)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testCalendar.py", line 965, in test_LeaveRequestWithSameDateAsRepeatedGroupCalendar
to_date=DateTime(2008, 1, 7).latestTime()))
AssertionError: 36000 != '36000'
FAIL: test_SimpleLeaveRequestWithSameDateAsGroupCalendar (testCalendar.TestCalendar)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testCalendar.py", line 822, in test_SimpleLeaveRequestWithSameDateAsGroupCalendar
to_date=self.stop_date+1))
AssertionError: 43200 != '43200'
FAIL: test_atTheEndOfPeriod (testDateUtils.TestDateUtils)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/Products/ERP5Type/tests/testDateUtils.py", line 168, in test_atTheEndOfPeriod
self.assertEqual(atTheEndOfPeriod(date, 'week').pCommonZ(), 'Jan. 7, 2008 12:00 am Universal')
AssertionError: 'Jan. 8, 2008 12:00 am Universal' != 'Jan. 7, 2008 12:00 am Universal'
ERROR: test_Base_createNewFile_empty (testDms.TestDocument)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 882, in test_Base_createNewFile_empty
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 654, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_604c822695152714e5fc9d07b159c4bb/document_module/43', 'discoverMetadata', -2, 6)]
Last error message:
NotConvertedError
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 294, in __call__
Module Products.ERP5.Document.Document, line 1074, in discoverMetadata
Module Products.ERP5.Document.Document, line 990, in getPropertyDictFromContent
NotConvertedError
ERROR: test_Base_createNewFile_empty (testDmsWithFlare.TestDocumentWithFlare)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.7/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.7/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 882, in test_Base_createNewFile_empty
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.7/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 654, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_efe675ffc6dff92eecfb7dac1e0cc9a6/document_module/43', 'discoverMetadata', -2, 6)]
Last error message:
NotConvertedError
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 294, in __call__
Module Products.ERP5.Document.Document, line 1074, in discoverMetadata
Module Products.ERP5.Document.Document, line 990, in getPropertyDictFromContent
NotConvertedError
FAIL: test_42_SearchableText (testERP5Catalog.TestERP5Catalog), Tests SearchableText is working in ERP5Catalog
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Catalog/tests/testERP5Catalog.py", line 1330, in test_42_SearchableText
[x.getObject for x in self.getCatalogTool()(
AssertionError: [] != [<bound method r.getObject of <Shared.DC.ZRDB.Results.r object at 0x7fdfd20>>, <bound method r.getObject of <Shared.DC.ZRDB.Results.r object at 0x7fcd0a0>>, <bound method r.getObject of <Shared.DC.ZRDB.Results.r object at 0x7fdfd70>>, <bound method r.getObject of <Shared.DC.ZRDB.Results.r object at 0x7fdfb90>>, <bound method r.getObject of <Shared.DC.ZRDB.Results.r object at 0x7fdfc80>>, <bound method r.getObject of <Shared.DC.ZRDB.Results.r object at 0x7fdfcd0>>, <bound method r.getObject of <Shared.DC.ZRDB.Results.r object at 0x7fdfdc0>>, <bound method r.getObject of <Shared.DC.ZRDB.Results.r object at 0x6ce5c30>>, <bound method r.getObject of <Shared.DC.ZRDB.Results.r object at 0x6ce5d70>>, <bound method r.getObject of <Shared.DC.ZRDB.Results.r object at 0x6ce5d20>>]
FAIL: test_complex_query (testERP5Catalog.TestERP5Catalog)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Catalog/tests/testERP5Catalog.py", line 2316, in test_complex_query
self.assertEqual(len(catalog(query=query)), 3)
AssertionError: 2 != 3
ERROR: test_Products.ERP5.AggregatedAmountList_AggregatedAmountList_implements_IAmountList (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IAmountList.IAmountList>
ERROR: test_Products.ERP5Type.Document.BusinessPath_BusinessPath_implements_IBusinessPath (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IBusinessPath.IBusinessPath>
The getExpectedCompletionDuration attribute was not provided.
ERROR: test_Products.ERP5Type.Document.BusinessPath_BusinessPath_implements_ICategoryAccessProvider (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 85, in _verify
raise BrokenMethodImplementation(n, mess)
BrokenMethodImplementation: The implementation of _getAcquiredCategoryMembershipList violates its contract
because implementation doesn't allow enough arguments.
ERROR: test_Products.ERP5Type.Document.Document_Document_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>
ERROR: test_Products.ERP5Type.Document.EmailDocument_EmailDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>
ERROR: test_Products.ERP5Type.Document.Event_Event_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>
ERROR: test_Products.ERP5Type.Document.File_File_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>
ERROR: test_Products.ERP5Type.Document.Image_Image_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>
ERROR: test_Products.ERP5Type.Document.OOoDocument_OOoDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>
ERROR: test_Products.ERP5Type.Document.TextDocument_TextDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>
ERROR: test_Products.ERP5Type.Document.TradeCondition_TradeCondition_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 85, in _verify
raise BrokenMethodImplementation(n, mess)
BrokenMethodImplementation: The implementation of getAggregatedAmountList violates its contract
because implementation doesn't allow enough arguments.
ERROR: test_Products.ERP5Type.Document.TradeModelRule_TradeModelRule_implements_IRule (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IRule.IRule>
The updateMovementCollection attribute was not provided.
ERROR: test_Products.ERP5Type.Document.TransformationRule_TransformationRule_implements_IRule (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IRule.IRule>
The updateMovementCollection attribute was not provided.
ERROR: test_Products.ERP5Type.Document.Transformation_Transformation_implements_IVariated (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 85, in _verify
raise BrokenMethodImplementation(n, mess)
BrokenMethodImplementation: The implementation of getVariationRangeCategoryItemList violates its contract
because implementation doesn't allow enough arguments.
ERROR: test_Products.ERP5Type.ConsistencyMessage_ConsistencyMessage_implements_IConsistencyMessage (testERP5TypeInterfaces.TestERP5TypeInterfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.7/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.7/build/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass Products.ERP5Type.interfaces.consistency_message.IConsistencyMessage>
The fix attribute was not provided.
FAIL: test_02_Table_07_CellFormat (testFormPrintout.TestFormPrintout), 7. Normal case: cell format cetting
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5OOo/tests/testFormPrintout.py", line 659, in test_02_Table_07_CellFormat
self.assertEqual(date_column.attrib[date_value_attrib], '2009-04-20')
AssertionError: '2009-04-19' != '2009-04-20'
FAIL: test_01_renderEvent (testICal.TestICal)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testICal.py", line 151, in test_01_renderEvent
self.assertEquals( # if this fail for you, try to set $TZ to Europe/Paris
AssertionError: '20070815T143000Z' != '20070815T083000Z'
FAIL: testOpenOrderRule (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 298, in testOpenOrderRule
[(DateTime(3000,2,10,10,0), DateTime(3000,2,11,10,0)),
AssertionError: [(DateTime('3000/02/10 10:00:00 US/Eastern'), DateTime('3000/02/11 10:00:00 US/Eastern')), (DateTime('3000/02/17 10:00:00 US/Eastern'), DateTime('3000/02/18 10:00:00 US/Eastern')), (DateTime('3000/02/24 10:00:00 US/Eastern'), DateTime('3000/02/25 10:00:00 US/Eastern')), (DateTime('3000/03/03 10:00:00 US/Eastern'), DateTime('3000/03/04 10:00:00 US/Eastern')), (DateTime('3000/03/10 10:00:00 US/Eastern'), DateTime('3000/03/11 10:00:00 US/Eastern'))] != [(DateTime('3000/02/10 10:00:00 US/Eastern'), DateTime('3000/02/11 10:00:00 US/Eastern')), (DateTime('3000/02/17 10:00:00 US/Eastern'), DateTime('3000/02/18 10:00:00 US/Eastern')), (DateTime('3000/02/24 10:00:00 US/Eastern'), DateTime('3000/02/25 10:00:00 US/Eastern')), (DateTime('3000/03/03 10:00:00 US/Eastern'), DateTime('3000/03/04 10:00:00 US/Eastern')), (DateTime('3000/03/10 10:00:00 GMT-4'), DateTime('3000/03/11 10:00:00 GMT-4'))]
FAIL: testPeriodicityDateList (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 179, in testPeriodicityDateList
self.fail('Test disabled because it freezes')
AssertionError: Test disabled because it freezes
FAIL: test_modelDateValidity (testPayroll.TestPayroll), check that model effective_date and expiration_date are take into
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testPayroll.py", line 3265, in test_modelDateValidity
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 165, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 110, in play
step.play(context, sequence=self, quiet=quiet)
Current Sequence:
CreatePriceCurrency
CreateLabourOutputService
CreateBusinessProcess
CreateBusinessPath
CreateUrssafRoubaixOrganisation
ModifyBusinessPathTradePhase
Tic
> CheckModelDateValidity
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testPayroll.py", line 1632, in stepCheckModelDateValidity
portal_type='Pay Sheet Line')), 1)
AssertionError: 0 != 1
FAIL: test_modelWithoutDateValidity (testPayroll.TestPayroll), Check that if no DATE are defined on a model, the behavior is that
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testPayroll.py", line 3247, in test_modelWithoutDateValidity
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 165, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 110, in play
step.play(context, sequence=self, quiet=quiet)
Current Sequence:
CreatePriceCurrency
CreateLabourOutputService
CreateBusinessProcess
CreateBusinessPath
CreateUrssafRoubaixOrganisation
ModifyBusinessPathTradePhase
Tic
> CheckModelWithoutDateValidity
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testPayroll.py", line 1544, in stepCheckModelWithoutDateValidity
portal_type='Pay Sheet Line')), 1)
AssertionError: 0 != 1
FAIL: test_modelWithoutReferenceValidity (testPayroll.TestPayroll), Check that if no REFERENCE are defined on a model, the behavior is
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testPayroll.py", line 3227, in test_modelWithoutReferenceValidity
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 165, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 110, in play
step.play(context, sequence=self, quiet=quiet)
Current Sequence:
CreatePriceCurrency
CreateLabourOutputService
CreateBusinessProcess
CreateBusinessPath
CreateUrssafRoubaixOrganisation
ModifyBusinessPathTradePhase
Tic
> CheckModelWithoutRefValidity
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testPayroll.py", line 1501, in stepCheckModelWithoutRefValidity
portal_type='Pay Sheet Line')), 1)
AssertionError: 0 != 1
FAIL: testSkinSelectionTemplateField (testProxyField.TestProxyField)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Form/tests/testProxyField.py", line 189, in testSkinSelectionTemplateField
self.assertEquals('Customized Title', field.get_value('title'))
AssertionError: 'Customized Title' != 'Generic Title'
FAIL: test_11_getPriceWithDestinationSection (testResource.TestResource)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testResource.py", line 773, in test_11_getPriceWithDestinationSection
product.getPrice())
AssertionError: 33 != 0.0
FAIL: test checking if the field values are of the proper type.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/Formulator/tests/testSerializeForm.py", line 358, in test_fieldValueTypes
self.assertEquals(field.values, field2.values)
AssertionError: {'alternate_name': '', 'title': 'Test Title', 'date_separator': '', 'editable': 0, 'input_order': 'mdy', 'start_datetime': None, 'description': '', 'default_now': 0, 'allow_empty_time': 0, 'ampm_time_style': 0, 'hide_day': 0, 'date_only': 0, 'time_separator': '$', 'hidden': 0, 'default': None, 'css_class': 'test_css', 'required': 1, 'enabled': 1, 'input_style': 'list', 'external_validator': '', 'hidden_day_is_last_day': 0, 'end_datetime': None, 'timezone_style': 0} != {'alternate_name': '', 'title': 'Test Title', 'date_separator': '', 'editable': 0, 'input_order': 'mdy', 'start_datetime': '', 'description': '', 'default_now': 0, 'allow_empty_time': 0, 'ampm_time_style': 0, 'hide_day': 0, 'date_only': 0, 'time_separator': '$', 'hidden': 0, 'default': '', 'css_class': 'test_css', 'required': 1, 'enabled': 1, 'input_style': 'list', 'external_validator': '', 'hidden_day_is_last_day': 0, 'end_datetime': '', 'timezone_style': 0}
FAIL: test_NonDeliveryTemplateNotIndexable (testTemplate.TestTemplate)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testTemplate.py", line 345, in test_NonDeliveryTemplateNotIndexable
self._testTemplateNotIndexable(document)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testTemplate.py", line 315, in _testTemplateNotIndexable
self.assertEquals(0, len(self.portal.portal_catalog(uid=template.getUid())))
AssertionError: 0 != 1
FAIL: test_manyTemplatesWithoutReindexation (testTemplate.TestTemplate), Check what happen when templates are created one by one without reindexation
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testTemplate.py", line 279, in test_manyTemplatesWithoutReindexation
self.assertEqual(len(preference_id_list) + 1, len(new_preference_id_list))
AssertionError: 1 != 2
FAIL: test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving (testTradeModelLine.TestTradeModelLineSale), Check that after changing invoice line invoice is properly diverged and it is possible to solve
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 1988, in test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving
sequence_list.play(self, quiet=True)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 165, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 110, in play
step.play(context, sequence=self, quiet=quiet)
Current Sequence:
CreateServiceTax
CreateServiceDiscount
CreatePriceCurrency
CreateProductDiscounted
CreateProductTaxed
CreateProductDiscountedTaxed
CreateSource
CreateSourceSection
CreateDestination
CreateDestinationSection
Tic
CreateBusinessProcess
CreateBusinessState
ModifyBusinessStateTaxed
CreateBusinessState
ModifyBusinessStateInvoiced
CreateBusinessPath
ModifyBusinessPathTaxing
CreateBusinessPath
ModifyBusinessPathDiscounting
CreateTradeCondition
SpecialiseTradeConditionWithBusinessProcess
CreateTradeModelLine
ModifyTradeModelLineTax
CreateTradeModelLine
ModifyTradeModelLineDiscount
Tic
CreateOrder
SpecialiseOrderTradeCondition
FillOrder
Tic
CreateOrderLine
ModifyOrderLineTaxed
CreateOrderLine
ModifyOrderLineDiscounted
CreateOrderLine
ModifyOrderLineDiscountedTaxed
Tic
CheckOrderComplexTradeConditionAggregatedAmountList
CheckOrderLineTaxedAggregatedAmountList
CheckOrderLineDiscountedTaxedAggregatedAmountList
CheckOrderLineDiscountedAggregatedAmountList
Tic
PlanOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
ConfirmOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetPackingList
PackPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
StartPackingList
StopPackingList
DeliverPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetInvoice
CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
GetInvoiceLineDiscounted
GetInvoiceLineDiscountedTaxed
GetInvoiceLineTaxed
ModifyQuantityInvoiceLineDiscounted
ModifyQuantityInvoiceLineDiscountedTaxed
ModifyQuantityInvoiceLineTaxed
Tic
CheckInvoiceCausalityStateDiverged
AcceptDecisionQuantityInvoice
Tic
> CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 460, in stepCheckInvoiceCausalityStateSolved
invoice.getDivergenceList())
AssertionError: [<DivergenceMessage object at 0x97257a0
'decision_value': 1.9999999999999998
'divergence_scope': 'quantity'
'prevision_value': 5.0
'mapping': {}
'object_relative_url': 'accounting_module/5/5'
'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/8/3/1/1/2/1>
'tested_property': 'quantity'
'decision_title': '1.9999999999999998'
'message': 'Quantity'>, <DivergenceMessage object at 0x73147a0
'decision_value': -0.60000000000000009
'divergence_scope': 'quantity'
'prevision_value': -1.5
'mapping': {}
'object_relative_url': 'accounting_module/5/5'
'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/8/2/1/1/2/2>
'tested_property': 'quantity'
'decision_title': '-0.60000000000000009'
'message': 'Quantity'>, <DivergenceMessage object at 0x9e07a70
'decision_value': 28.5
'divergence_scope': 'quantity'
'prevision_value': 71.25
'mapping': {}
'object_relative_url': 'accounting_module/5/5'
'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/8/1/1/1/2/2>
'tested_property': 'quantity'
'decision_title': '28.5'
'message': 'Quantity'>, <DivergenceMessage object at 0x6f18638
'decision_value': 12.0
'divergence_scope': 'quantity'
'prevision_value': 30.0
'mapping': {}
'object_relative_url': 'accounting_module/5/4'
'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/8/2/1/1/2/1>
'tested_property': 'quantity'
'decision_title': '12.0'
'message': 'Quantity'>, <DivergenceMessage object at 0x747d830
'decision_value': 30.0
'divergence_scope': 'quantity'
'prevision_value': 75.0
'mapping': {}
'object_relative_url': 'accounting_module/5/4'
'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/8/1/1/1/2/1>
'tested_property': 'quantity'
'decision_title': '30.0'
'message': 'Quantity'>]
FAIL: test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio (testTradeModelLine.TestTradeModelLineSale), Check building invoice after splitting packing list using different ratio
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2069, in test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio
sequence_list.play(self, quiet=True)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 165, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 110, in play
step.play(context, sequence=self, quiet=quiet)
Current Sequence:
CreateServiceTax
CreateServiceDiscount
CreatePriceCurrency
CreateProductDiscounted
CreateProductTaxed
CreateProductDiscountedTaxed
CreateSource
CreateSourceSection
CreateDestination
CreateDestinationSection
Tic
CreateBusinessProcess
CreateBusinessState
ModifyBusinessStateTaxed
CreateBusinessState
ModifyBusinessStateInvoiced
CreateBusinessPath
ModifyBusinessPathTaxing
CreateBusinessPath
ModifyBusinessPathDiscounting
CreateTradeCondition
SpecialiseTradeConditionWithBusinessProcess
CreateTradeModelLine
ModifyTradeModelLineTax
CreateTradeModelLine
ModifyTradeModelLineDiscount
Tic
CreateOrder
SpecialiseOrderTradeCondition
FillOrder
Tic
CreateOrderLine
ModifyOrderLineTaxed
CreateOrderLine
ModifyOrderLineDiscounted
CreateOrderLine
ModifyOrderLineDiscountedTaxed
Tic
CheckOrderComplexTradeConditionAggregatedAmountList
CheckOrderLineTaxedAggregatedAmountList
CheckOrderLineDiscountedTaxedAggregatedAmountList
CheckOrderLineDiscountedAggregatedAmountList
Tic
PlanOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
ConfirmOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetPackingList
DecreasePackingListLineListQuantity
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
CheckPackingListDiverged
SplitAndDeferPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetNewPackingList
PackPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
StartPackingList
StopPackingList
DeliverPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetInvoice
> CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
SetNewPackingListAsPackingList
PackPackingList
Tic
StartPackingList
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
StopPackingList
DeliverPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetInvoice
CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 460, in stepCheckInvoiceCausalityStateSolved
invoice.getDivergenceList())
AssertionError: [<DivergenceMessage object at 0x840de60
'decision_value': -0.049999999999999989
'divergence_scope': 'property'
'prevision_value': -0.050000000000000003
'mapping': {}
'object_relative_url': 'accounting_module/12/5'
'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/21/1/1/1/2/1>
'tested_property': 'price'
'message': 'Price'>, <DivergenceMessage object at 0x930c638
'decision_value': -0.049999999999999989
'divergence_scope': 'property'
'prevision_value': -0.050000000000000003
'mapping': {}
'object_relative_url': 'accounting_module/12/5'
'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/21/2/1/1/2/1>
'tested_property': 'price'
'message': 'Price'>]
FAIL: test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving (testTradeModelLine.TestTradeModelLinePurchase), Check that after changing invoice line invoice is properly diverged and it is possible to solve
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 1988, in test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving
sequence_list.play(self, quiet=True)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 165, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 110, in play
step.play(context, sequence=self, quiet=quiet)
Current Sequence:
CreateServiceTax
CreateServiceDiscount
CreatePriceCurrency
CreateProductDiscounted
CreateProductTaxed
CreateProductDiscountedTaxed
CreateSource
CreateSourceSection
CreateDestination
CreateDestinationSection
Tic
CreateBusinessProcess
CreateBusinessState
ModifyBusinessStateTaxed
CreateBusinessState
ModifyBusinessStateInvoiced
CreateBusinessPath
ModifyBusinessPathTaxing
CreateBusinessPath
ModifyBusinessPathDiscounting
CreateTradeCondition
SpecialiseTradeConditionWithBusinessProcess
CreateTradeModelLine
ModifyTradeModelLineTax
CreateTradeModelLine
ModifyTradeModelLineDiscount
Tic
CreateOrder
SpecialiseOrderTradeCondition
FillOrder
Tic
CreateOrderLine
ModifyOrderLineTaxed
CreateOrderLine
ModifyOrderLineDiscounted
CreateOrderLine
ModifyOrderLineDiscountedTaxed
Tic
CheckOrderComplexTradeConditionAggregatedAmountList
CheckOrderLineTaxedAggregatedAmountList
CheckOrderLineDiscountedTaxedAggregatedAmountList
CheckOrderLineDiscountedAggregatedAmountList
Tic
PlanOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
ConfirmOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetPackingList
PackPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
StartPackingList
StopPackingList
DeliverPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetInvoice
CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
GetInvoiceLineDiscounted
GetInvoiceLineDiscountedTaxed
GetInvoiceLineTaxed
ModifyQuantityInvoiceLineDiscounted
ModifyQuantityInvoiceLineDiscountedTaxed
ModifyQuantityInvoiceLineTaxed
Tic
CheckInvoiceCausalityStateDiverged
AcceptDecisionQuantityInvoice
Tic
> CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 460, in stepCheckInvoiceCausalityStateSolved
invoice.getDivergenceList())
AssertionError: [<DivergenceMessage object at 0xaf70998
'decision_value': 1.9999999999999998
'divergence_scope': 'quantity'
'prevision_value': 5.0
'mapping': {}
'object_relative_url': 'accounting_module/5/5'
'simulation_movement': <SimulationMovement at /erp5_portal_09d9535cbc3bc43e384f3d15defba190/portal_simulation/8/3/1/1/2/1>
'tested_property': 'quantity'
'decision_title': '1.9999999999999998'
'message': 'Quantity'>, <DivergenceMessage object at 0xa89edd0
'decision_value': -0.60000000000000009
'divergence_scope': 'quantity'
'prevision_value': -1.5
'mapping': {}
'object_relative_url': 'accounting_module/5/5'
'simulation_movement': <SimulationMovement at /erp5_portal_09d9535cbc3bc43e384f3d15defba190/portal_simulation/8/2/1/1/2/2>
'tested_property': 'quantity'
'decision_title': '-0.60000000000000009'
'message': 'Quantity'>, <DivergenceMessage object at 0x8d0a908
'decision_value': 28.5
'divergence_scope': 'quantity'
'prevision_value': 71.25
'mapping': {}
'object_relative_url': 'accounting_module/5/5'
'simulation_movement': <SimulationMovement at /erp5_portal_09d9535cbc3bc43e384f3d15defba190/portal_simulation/8/1/1/1/2/2>
'tested_property': 'quantity'
'decision_title': '28.5'
'message': 'Quantity'>, <DivergenceMessage object at 0xad0ec68
'decision_value': 12.0
'divergence_scope': 'quantity'
'prevision_value': 30.0
'mapping': {}
'object_relative_url': 'accounting_module/5/4'
'simulation_movement': <SimulationMovement at /erp5_portal_09d9535cbc3bc43e384f3d15defba190/portal_simulation/8/2/1/1/2/1>
'tested_property': 'quantity'
'decision_title': '12.0'
'message': 'Quantity'>, <DivergenceMessage object at 0xaa91b90
'decision_value': 30.0
'divergence_scope': 'quantity'
'prevision_value': 75.0
'mapping': {}
'object_relative_url': 'accounting_module/5/4'
'simulation_movement': <SimulationMovement at /erp5_portal_09d9535cbc3bc43e384f3d15defba190/portal_simulation/8/1/1/1/2/1>
'tested_property': 'quantity'
'decision_title': '30.0'
'message': 'Quantity'>]
FAIL: test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio (testTradeModelLine.TestTradeModelLinePurchase), Check building invoice after splitting packing list using different ratio
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2069, in test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio
sequence_list.play(self, quiet=True)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 165, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 110, in play
step.play(context, sequence=self, quiet=quiet)
Current Sequence:
CreateServiceTax
CreateServiceDiscount
CreatePriceCurrency
CreateProductDiscounted
CreateProductTaxed
CreateProductDiscountedTaxed
CreateSource
CreateSourceSection
CreateDestination
CreateDestinationSection
Tic
CreateBusinessProcess
CreateBusinessState
ModifyBusinessStateTaxed
CreateBusinessState
ModifyBusinessStateInvoiced
CreateBusinessPath
ModifyBusinessPathTaxing
CreateBusinessPath
ModifyBusinessPathDiscounting
CreateTradeCondition
SpecialiseTradeConditionWithBusinessProcess
CreateTradeModelLine
ModifyTradeModelLineTax
CreateTradeModelLine
ModifyTradeModelLineDiscount
Tic
CreateOrder
SpecialiseOrderTradeCondition
FillOrder
Tic
CreateOrderLine
ModifyOrderLineTaxed
CreateOrderLine
ModifyOrderLineDiscounted
CreateOrderLine
ModifyOrderLineDiscountedTaxed
Tic
CheckOrderComplexTradeConditionAggregatedAmountList
CheckOrderLineTaxedAggregatedAmountList
CheckOrderLineDiscountedTaxedAggregatedAmountList
CheckOrderLineDiscountedAggregatedAmountList
Tic
PlanOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
ConfirmOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetPackingList
DecreasePackingListLineListQuantity
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
CheckPackingListDiverged
SplitAndDeferPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetNewPackingList
PackPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
StartPackingList
StopPackingList
DeliverPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetInvoice
> CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
SetNewPackingListAsPackingList
PackPackingList
Tic
StartPackingList
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
StopPackingList
DeliverPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetInvoice
CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 460, in stepCheckInvoiceCausalityStateSolved
invoice.getDivergenceList())
AssertionError: [<DivergenceMessage object at 0x80e8c20
'decision_value': -0.049999999999999989
'divergence_scope': 'property'
'prevision_value': -0.050000000000000003
'mapping': {}
'object_relative_url': 'accounting_module/12/5'
'simulation_movement': <SimulationMovement at /erp5_portal_09d9535cbc3bc43e384f3d15defba190/portal_simulation/21/2/1/1/2/1>
'tested_property': 'price'
'message': 'Price'>, <DivergenceMessage object at 0xa2c9b90
'decision_value': -0.049999999999999989
'divergence_scope': 'property'
'prevision_value': -0.050000000000000003
'mapping': {}
'object_relative_url': 'accounting_module/12/5'
'simulation_movement': <SimulationMovement at /erp5_portal_09d9535cbc3bc43e384f3d15defba190/portal_simulation/21/1/1/1/2/1>
'tested_property': 'price'
'message': 'Price'>]
FAIL: test.erp5_dms.Drawing.OOoDocument_viewAsWeb (testXHTML.TestXHTML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testXHTML.py", line 392, in testMethod
bt_name=bt_name))
AssertionError: Using w3c validator to parse the view "OOoDocument_viewAsWeb" (from erp5_dms bt) with warnings displayed :
Error: line 514 column 43 : there is no attribute "class"
Error: line 514 column 63 : there is no attribute "style"
Error: line 514 column 105 : there is no attribute "src"
Error: line 514 column 222 : there is no attribute "onload"
Error: line 514 column 244 : element "iframe" undefined
FAIL: test.erp5_dms.Presentation.OOoDocument_viewAsWeb (testXHTML.TestXHTML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testXHTML.py", line 392, in testMethod
bt_name=bt_name))
AssertionError: Using w3c validator to parse the view "OOoDocument_viewAsWeb" (from erp5_dms bt) with warnings displayed :
Error: line 514 column 43 : there is no attribute "class"
Error: line 514 column 63 : there is no attribute "style"
Error: line 514 column 105 : there is no attribute "src"
Error: line 514 column 222 : there is no attribute "onload"
Error: line 514 column 244 : element "iframe" undefined
FAIL: test_9999_SetCellRangeAndCatalogWithoutActivities (testXMLMatrix.TestXMLMatrix)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/Products/ERP5Type/tests/testXMLMatrix.py", line 342, in test_9999_SetCellRangeAndCatalogWithoutActivities
self.checkSetCellRangeAndCatalog(active=0)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/Products/ERP5Type/tests/testXMLMatrix.py", line 213, in checkSetCellRangeAndCatalog
matrix = order.newContent(id='1', portal_type='Purchase Order Line')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 455, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 163, in newContent
is_indexable=is_indexable
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/ERP5Type.py", line 355, in constructInstance
ob = m(id, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Utils.py", line 459, in __call__
folder._setObject(id, o)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Base.py", line 237, in __call__
result = apply(self.__dict__['_m'], (instance,) + args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 884, in _setObject
return CMFBTreeFolder._setObject(self, id, object, roles, user, set_owner)
File "/usr/lib/erp5/lib/python/Products/BTreeFolder2/BTreeFolder2.py", line 431, in _setObject
object.manage_afterAdd(object, self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/Document/DeliveryLine.py", line 364, in manage_afterAdd
return Movement.manage_afterAdd(self, item, container)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/CopySupport.py", line 318, in manage_afterAdd
self.reindexObject()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/Document/DeliveryLine.py", line 245, in reindexObject
self.recursiveReindexObject(*k, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 1197, in recursiveReindexObject
serialization_tag=self.getRootDocumentPath(),
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 1222, in recursiveImmediateReindexObject
self.immediateReindexObject(**kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Base.py", line 2863, in immediateReindexObject
PortalContent.reindexObject(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/patches/CMFCatalogAware.py", line 36, in reindexObject
catalog.reindexObject(self, idxs=idxs, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Catalog/CatalogTool.py", line 770, in reindexObject
self.catalog_object(object, url, idxs=idxs, sql_catalog_id=sql_catalog_id,**kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ZSQLCatalog/ZSQLCatalog.py", line 702, in catalog_object
self.catalogObjectList([obj], sql_catalog_id=sql_catalog_id)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ZSQLCatalog/ZSQLCatalog.py", line 832, in catalogObjectList
catalog.catalogObjectList(wrapped_object_list, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ZSQLCatalog/SQLCatalog.py", line 1253, in catalogObjectList
idxs=idxs)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ZSQLCatalog/SQLCatalog.py", line 1359, in _catalogObjectList
'uid of %r changed from %r to %r as old one is assigned'
File "/usr/lib/erp5/lib/python/zLOG/__init__.py", line 134, in LOG
log_write(subsystem, severity, summary, detail, error)
File "/usr/lib/erp5/lib/python/Products/CMFCore/tests/base/testcase.py", line 44, in log_write
assert 0, "%s(%s): %s" % (subsystem, severity, summary)
AssertionError: SQLCatalog(200): uid of <Products.ERP5Catalog.CatalogTool.IndexableObjectWrapper for /erp5_portal_4939e1bc5bb8b512faa8dd8f5ee3468e/purchase_order_module/1/1> changed from 547L to 547L as old one is assigned to /erp5_portal_4939e1bc5bb8b512faa8dd8f5ee3468e/purchase_order_module/1 in catalog !!! This can be fatal.
More information about the Erp5-report
mailing list