[Erp5-report] ERP5 r44525 : 4583 Tests, 11 Errors, 20 Failures, 219 Skips
nobody at svn.erp5.org
nobody at svn.erp5.org
Wed Mar 23 06:18:01 CET 2011
Test Suite: ERP5
Revision: None
Result: FAIL
All tests: 4583
Failures: 20
Errors: 11
Skips: 219
The following tests failed:
testDms (1 failures, 1 skips)
test_base_convertable_behaviour_with_successive_updates (testDms.TestDocument), Check that update content's document (with setData and setFile)
testDmsWithFlare (1 failures, 1 skips)
test_base_convertable_behaviour_with_successive_updates (testDmsWithFlare.TestDocumentWithFlare), Check that update content's document (with setData and setFile)
testERP5DocumentSyncML (1 failures, 2 errors)
test_03_UpdateSimpleData (testERP5DocumentSyncML.TestERP5DocumentSyncML)
test_06_UpdateMultiData (testERP5DocumentSyncML.TestERP5DocumentSyncML)
test_08_MultiNodeConflict (testERP5DocumentSyncML.TestERP5DocumentSyncML)
testLegacyTradeModelLine (2 failures)
test_tradeModelLineWithRounding (Products.ERP5.tests.testTradeModelLine.TestTradeModelLineSale)
test_tradeModelLineWithRounding (Products.ERP5.tests.testTradeModelLinePurchase.TestTradeModelLinePurchase)
testPayroll (2 failures)
test_AccountingLineGeneration (testPayroll.TestPayroll)
test_sourceSectionIsSetOnMovements (testPayroll.TestPayroll)
testStandardConfigurationWorkflow (1 failures)
test_after_configuration_standard_workflow_france (testStandardConfigurationWorkflow.TestStandardConfiguratorWorkflow), Test the after configuration script
testTemplateTool (1 errors)
testUpdateBT5FromRepository (testTemplateTool.TestTemplateTool), Test the list of bt5 returned for upgrade
testTradeModelLine (4 failures, 4 errors)
test_01a_InvoiceNewTradeConditionOrLineSupport (testTradeModelLine.TestTradeModelLineSale)
test_01b_NewSimulation_InvoiceModifyQuantityAndSolveDivergency (testTradeModelLine.TestTradeModelLineSale)
test_01c_PackingListSplitBuildInvoiceBuild (testTradeModelLine.TestTradeModelLineSale)
test_BuildTradeModelLineAndAccountingFromOrder (testTradeModelLine.TestTradeModelLineSale)
test_01_OrderWithSimpleTaxedAndDiscountedLines (testTradeModelLine.TestTradeModelLineSale), Full test case with quite simple linear use case
test_02_OrderWithComplexTaxedAndDiscountedLines (testTradeModelLine.TestTradeModelLineSale)
test_BuildTradeModelLineAndAccountingFromInvoice (testTradeModelLine.TestTradeModelLineSale)
test_tradeModelLineWithRounding (testTradeModelLine.TestTradeModelLineSale)
testTradeModelLinePurchase (4 failures, 4 errors)
test_01a_InvoiceNewTradeConditionOrLineSupport (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_01b_NewSimulation_InvoiceModifyQuantityAndSolveDivergency (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_01c_PackingListSplitBuildInvoiceBuild (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_BuildTradeModelLineAndAccountingFromOrder (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_01_OrderWithSimpleTaxedAndDiscountedLines (testTradeModelLinePurchase.TestTradeModelLinePurchase), Full test case with quite simple linear use case
test_02_OrderWithComplexTaxedAndDiscountedLines (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_BuildTradeModelLineAndAccountingFromInvoice (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_tradeModelLineWithRounding (testTradeModelLinePurchase.TestTradeModelLinePurchase)
testUNG (1 failures)
testERP5Site_checkIfUserExistUsingHttpRequest (testUNG.TestUNG), Test script ERP5Site_checkIfUserExist to simulate the browser request
testUNGSecurity (1 failures)
testBase_getPreferencePathList (testUNGSecurity.TestUNGSecurity), Test if with normal user the paths of preference objects are returned correctly
testWorklist (1 failures)
test_04_dynamic_variables (testWorklist.TestWorklist)
testXHTML (1 failures)
test_duplicatingSelectionNameInListbox (testXHTML.TestXHTML)
The following tests were at least partly skipped:
testAccountingRules (22 skips)
testAdvancedInvoicing (4 skips)
testBPMEvaluation (40 skips)
done (7.557s)test_confirming (testBPMEvaluation.TestOrderDefaultProcess) ... skipped 'broken since r39918'
test_transition (testBPMEvaluation.TestOrderDefaultProcess) ... skipped 'broken since r39918'
test_transition_line_edit (testBPMEvaluation.TestOrderDefaultProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add (testBPMEvaluation.TestOrderDefaultProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_many_transactions (testBPMEvaluation.TestOrderDefaultProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_same_resource (testBPMEvaluation.TestOrderDefaultProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_same_resource_edit_again (testBPMEvaluation.TestOrderDefaultProcess) ... skipped 'broken since r39918'
test_transition_split (testBPMEvaluation.TestOrderDefaultProcess) ... skipped 'broken since r39918'
test_transition_split_line_add (testBPMEvaluation.TestOrderDefaultProcess) ... skipped 'broken since r39918'
test_transition_split_line_add_split (testBPMEvaluation.TestOrderDefaultProcess) ... skipped 'broken since r39918'
test_starting (testBPMEvaluation.TestPackingListDefaultProcess) ... skipped 'broken since r39918'
test_transition (testBPMEvaluation.TestPackingListDefaultProcess) ... skipped 'broken since r39918'
test_transition_line_edit (testBPMEvaluation.TestPackingListDefaultProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add (testBPMEvaluation.TestPackingListDefaultProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_many_transactions (testBPMEvaluation.TestPackingListDefaultProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_same_resource (testBPMEvaluation.TestPackingListDefaultProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_same_resource_edit_again (testBPMEvaluation.TestPackingListDefaultProcess) ... skipped 'broken since r39918'
test_transition_split (testBPMEvaluation.TestPackingListDefaultProcess) ... skipped 'broken since r39918'
test_transition_split_line_add (testBPMEvaluation.TestPackingListDefaultProcess) ... skipped 'broken since r39918'
test_transition_split_line_add_split (testBPMEvaluation.TestPackingListDefaultProcess) ... skipped 'broken since r39918'
test_confirming (testBPMEvaluation.TestOrderDifferentProcess) ... skipped 'broken since r39918'
test_transition (testBPMEvaluation.TestOrderDifferentProcess) ... skipped 'broken since r39918'
test_transition_line_edit (testBPMEvaluation.TestOrderDifferentProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add (testBPMEvaluation.TestOrderDifferentProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_many_transactions (testBPMEvaluation.TestOrderDifferentProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_same_resource (testBPMEvaluation.TestOrderDifferentProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_same_resource_edit_again (testBPMEvaluation.TestOrderDifferentProcess) ... skipped 'broken since r39918'
test_transition_split (testBPMEvaluation.TestOrderDifferentProcess) ... skipped 'broken since r39918'
test_transition_split_line_add (testBPMEvaluation.TestOrderDifferentProcess) ... skipped 'broken since r39918'
test_transition_split_line_add_split (testBPMEvaluation.TestOrderDifferentProcess) ... skipped 'broken since r39918'
test_starting (testBPMEvaluation.TestPackingListDifferentProcess) ... skipped 'broken since r39918'
test_transition (testBPMEvaluation.TestPackingListDifferentProcess) ... skipped 'broken since r39918'
test_transition_line_edit (testBPMEvaluation.TestPackingListDifferentProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add (testBPMEvaluation.TestPackingListDifferentProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_many_transactions (testBPMEvaluation.TestPackingListDifferentProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_same_resource (testBPMEvaluation.TestPackingListDifferentProcess) ... skipped 'broken since r39918'
test_transition_line_edit_add_same_resource_edit_again (testBPMEvaluation.TestPackingListDifferentProcess) ... skipped 'broken since r39918'
test_transition_split (testBPMEvaluation.TestPackingListDifferentProcess) ... skipped 'broken since r39918'
test_transition_split_line_add (testBPMEvaluation.TestPackingListDifferentProcess) ... skipped 'broken since r39918'
test_transition_split_line_add_split (testBPMEvaluation.TestPackingListDifferentProcess) ... skipped 'broken since r39918'
testBase (3 skips)
test_NonIndexable (testBase.TestBase), check if a document is not indexed where we set isIndexable=0 in the same transaction of newContent(). ... skipped 'isIndexable is not designed to work like tested here, this test must be rewritten once we know how to handle correctly templates'
test_NonIndexable2 (testBase.TestBase), check if a document is not indexed where we call edit() and set isIndexable=0 after it is already indexed. ... skipped 'isIndexable is not designed to work like tested here, this test must be rewritten once we know how to handle correctly templates'
test_NonIndexable3 (testBase.TestBase), check if a document is not indexed where we set isIndexable=0 and call edit() after it is already indexed. ... skipped 'isIndexable is not designed to work like tested here, this test must be rewritten once we know how to handle correctly templates'
testBusinessTemplate (2 skips)
testCRM (2 skips)
testConversionInSimulation (4 skips)
testDeliveryBuilderToSupportMultipleLines (2 skips)
testDivergenceTester (5 skips)
testDms (1 skips)
testDmsWithFlare (1 skips)
testDynamicClassGeneration (1 skips)
testERP5Base (1 skips)
testERP5Catalog (4 skips)
test_49_IndexInOrderedSearchFolder (testERP5Catalog.TestERP5Catalog) ... skipped 'TODO ERP5'
test_SubDocumentsWithAcquireLocalRoleSecurityIndexing (testERP5Catalog.TestERP5Catalog) ... skipped 'TODO ERP5'
test_sortOnRelatedKeyWithUnsetRelation (testERP5Catalog.TestERP5Catalog) ... skipped 'TODO ERP5'
testERP5Interfaces (9 skips)
testERP5Type (1 skips)
testERP5TypeInterfaces (1 skips)
testERP5Web (2 skips)
testFormPrintoutAsODT (1 skips)
test_09_FieldReplacementWithValidation (testFormPrintoutAsODT.TestFormPrintoutAsODT) ... skipped 'Disable validation because OOo does not produce compliant xml, and RelaxNG status is still draft'
testICal (1 skips)
testImmobilisation (2 skips)
testIngestion (4 skips)
testIngestionWithFlare (4 skips)
testInventoryAPI (2 skips)
testInvoice (7 skips)
testItem (13 skips)
testKM (3 skips)
testLegacyMRP (4 skips)
test_TransformationRule_expand_concurrent (Products.ERP5.tests.testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationRule_expand_reexpand (Products.ERP5.tests.testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationRule_getHeadProductionPathList (Products.ERP5.tests.testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationSourcingRule_expand (Products.ERP5.tests.testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
testLegacyProjectAndTask (1 skips)
testLegacySimulationInventoryAPI (2 skips)
testMRP (5 skips)
test_TransformationRule_expand_concurrent (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationRule_expand_reexpand (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationRule_getHeadProductionPathList (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationSourcingRule_expand (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
testOpenOrder (3 skips)
testOrderBuilder (4 skips)
testPackingList (16 skips)
testPackingListRoundingPrecision (8 skips)
testPreferences (1 skips)
testProductionOrder (8 skips)
testProductionOrderApparel (6 skips)
testProductionPackingList (1 skips)
testProductionPackingListApparel (1 skips)
testProject (1 skips)
testProxyField (1 skips)
testReturnedSalePackingList (3 skips)
testSQLCachedWorklist (2 skips)
test_02_related_key (testSQLCachedWorklist.TestSQLCachedWorklist) ... skipped 'TODO ERP5'
test_04_dynamic_variables (testSQLCachedWorklist.TestSQLCachedWorklist) ... skipped 'TODO ERP5'
testSelectionTool (7 skips)
skipped 'Test to be written'
testPage (testSelectionTool.TestSelectionTool) ... skipped 'Test to be written'
testView (testSelectionTool.TestSelectionTool) ... skipped 'Test to be written'
skipped 'Test to be written'
testDeleteGlobalSelection (testSelectionTool.TestSelectionToolMemcachedStorage) ... skipped 'To be decided if implementation is required'
testPage (testSelectionTool.TestSelectionToolMemcachedStorage) ... skipped 'Test to be written'
testView (testSelectionTool.TestSelectionToolMemcachedStorage) ... skipped 'Test to be written'
testTaskReportDivergence (1 skips)
testTemplate (1 skips)
testWebDavSupport (1 skips)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: summary.diff
Type: text/x-diff
Size: 2211 bytes
Desc: not available
URL: <http://mail.tiolive.com/pipermail/erp5-report/attachments/20110323/6fc2b148/attachment-0001.diff>
-------------- next part --------------
FAIL: test_base_convertable_behaviour_with_successive_updates (testDms.TestDocument), Check that update content's document (with setData and setFile)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.5/Products/ERP5OOo/tests/testDms.py", line 2261, in test_base_convertable_behaviour_with_successive_updates
'base data is not refreshed')
AssertionError: base data is not refreshed
FAIL: test_base_convertable_behaviour_with_successive_updates (testDmsWithFlare.TestDocumentWithFlare), Check that update content's document (with setData and setFile)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.5/Products/ERP5OOo/tests/testDms.py", line 2261, in test_base_convertable_behaviour_with_successive_updates
'base data is not refreshed')
AssertionError: base data is not refreshed
ERROR: test_03_UpdateSimpleData (testERP5DocumentSyncML.TestERP5DocumentSyncML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.5/Products/ERP5SyncML/tests/testERP5DocumentSyncML.py", line 639, in test_03_UpdateSimpleData
self.tic()
File "/home/buildbot/slave/full.ERP5/build/unit_test.2/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_f5e135ab1569571772452b9867b308c0/document_server/2', 'Document_tryToUpdateBaseMetadata', -2, 1)]
Last error message:
UnsupportedWorkflowMethod
Transition processing_status_workflow/process_conversion_failed unsupported for <Text at /erp5_portal_f5e135ab1569571772452b9867b308c0/document_server/2>. Current state is 'empty'.
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Shared.DC.Scripts.Bindings, line 311, in __call__
Module Shared.DC.Scripts.Bindings, line 348, in _bindAndExec
Module Products.ERP5Type.tests.ERP5TypeTestCase, line 1293, in _exec
Module Products.PythonScripts.PythonScript, line 325, in _exec
Module None, line 27, in Document_tryToUpdateBaseMetadata
- <PythonScript at /erp5_portal_f5e135ab1569571772452b9867b308c0/Document_tryToUpdateBaseMetadata used for /erp5_portal_f5e135ab1569571772452b9867b308c0/document_server/2>
- Line 27
Module Products.ERP5Type.Base, line 220, in __call__
UnsupportedWorkflowMethod: Transition processing_status_workflow/process_conversion_failed unsupported for <Text at /erp5_portal_f5e135ab1569571772452b9867b308c0/document_server/2>. Current state is 'empty'.
ERROR: test_06_UpdateMultiData (testERP5DocumentSyncML.TestERP5DocumentSyncML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.5/Products/ERP5SyncML/tests/testERP5DocumentSyncML.py", line 701, in test_06_UpdateMultiData
self.synchronize(self.sub_id1)
File "/home/buildbot/slave/full.ERP5/build/unit_test.5/Products/ERP5SyncML/tests/testERP5DocumentSyncML.py", line 358, in synchronize
self.tic()
File "/home/buildbot/slave/full.ERP5/build/unit_test.2/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_f5e135ab1569571772452b9867b308c0/document_client1/7', 'Document_tryToUpdateBaseMetadata', -2, 1)]
Last error message:
UnsupportedWorkflowMethod
Transition processing_status_workflow/process_conversion_failed unsupported for <Text at /erp5_portal_f5e135ab1569571772452b9867b308c0/document_client1/7>. Current state is 'empty'.
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Shared.DC.Scripts.Bindings, line 311, in __call__
Module Shared.DC.Scripts.Bindings, line 348, in _bindAndExec
Module Products.ERP5Type.tests.ERP5TypeTestCase, line 1293, in _exec
Module Products.PythonScripts.PythonScript, line 325, in _exec
Module None, line 27, in Document_tryToUpdateBaseMetadata
- <PythonScript at /erp5_portal_f5e135ab1569571772452b9867b308c0/Document_tryToUpdateBaseMetadata used for /erp5_portal_f5e135ab1569571772452b9867b308c0/document_client1/7>
- Line 27
Module Products.ERP5Type.Base, line 220, in __call__
UnsupportedWorkflowMethod: Transition processing_status_workflow/process_conversion_failed unsupported for <Text at /erp5_portal_f5e135ab1569571772452b9867b308c0/document_client1/7>. Current state is 'empty'.
FAIL: test_08_MultiNodeConflict (testERP5DocumentSyncML.TestERP5DocumentSyncML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.5/Products/ERP5SyncML/tests/testERP5DocumentSyncML.py", line 850, in test_08_MultiNodeConflict
self.assertEqual(len(conflict_list), 9)
AssertionError: 10 != 9
FAIL: test_tradeModelLineWithRounding (Products.ERP5.tests.testTradeModelLine.TestTradeModelLineSale)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 1159, in test_tradeModelLineWithRounding
self.assertEqual(2, len(amount_list)) # XXX 1 or 2 ???
AssertionError: 2 != 1
FAIL: test_tradeModelLineWithRounding (Products.ERP5.tests.testTradeModelLinePurchase.TestTradeModelLinePurchase)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 1159, in test_tradeModelLineWithRounding
self.assertEqual(2, len(amount_list)) # XXX 1 or 2 ???
AssertionError: 2 != 1
FAIL: test_AccountingLineGeneration (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.3/Products/ERP5/tests/testPayroll.py", line 3147, in test_AccountingLineGeneration
self.assertEquals(2050, line.getDestinationDebit())
AssertionError: 2050 != 0.0
FAIL: test_sourceSectionIsSetOnMovements (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.3/Products/ERP5/tests/testPayroll.py", line 2157, in test_sourceSectionIsSetOnMovements
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5/build/unit_test.3/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5/build/unit_test.3/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateUrssafService
CreateLabourService
CreateEmployer
CreateEmployee
CreatePriceCurrency
CreateBasicModel
Tic
ModelCreateUrssafModelLine
UrssafModelLineCreateMovements
CreateBasicPaysheet
PaysheetCreateLabourPaySheetLine
Tic
CreateBusinessProcess
CreateBusinessLink
CreateUrssafRoubaixOrganisation
ModifyBusinessLinkTradePhase
ModelSpecialiseBusinessProcess
Tic
PaysheetApplyTransformation
Tic
> CheckSourceSectionOnMovements
File "/home/buildbot/slave/full.ERP5/build/unit_test.3/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5/build/unit_test.3/Products/ERP5/tests/testPayroll.py", line 975, in stepCheckSourceSectionOnMovements
self.assertEquals(cell1.getSourceSectionValue(), urssaf_roubaix)
AssertionError: <Person at /erp5_portal_1f959768674d155451cb63f0b9097eef/person_module/22> != <Organisation at /erp5_portal_1f959768674d155451cb63f0b9097eef/organisation_module/43>
FAIL: test_after_configuration_standard_workflow_france (testStandardConfigurationWorkflow.TestStandardConfiguratorWorkflow), Test the after configuration script
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.3/bt5/erp5_configurator_standard/TestTemplateItem/testStandardConfigurationWorkflow.py", line 2863, in test_after_configuration_standard_workflow_france
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5/build/unit_test.3/Products/ERP5Type/tests/Sequence.py", line 207, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5/build/unit_test.3/Products/ERP5Type/tests/Sequence.py", line 127, in play
self._step_list[self._played_index] \
Current Sequence:
CreateBusinessConfiguration
Tic
SetStandardWorkflow
Tic
ConfiguratorNext
Tic
CheckBT5ConfiguratorItem
CheckConfigureOrganisationForm
SetupOrganisationConfiguratorItemFrance
ConfiguratorNext
Tic
CheckConfigureUserAccountNumberForm
CheckOrganisationConfiguratorItemFrance
SetupUserAccounNumberSix
ConfiguratorNext
Tic
CheckConfigureMultipleUserAccountForm
SetupMultipleUserAccountSix
ConfiguratorNext
Tic
CheckConfigureAccountingForm
CheckMultiplePersonConfigurationItem
SetupAccountingConfigurationFrance
ConfiguratorNext
Tic
CheckConfigurePreferenceForm
CheckAccountingConfigurationItemListFrance
SetupPreferenceConfigurationFrance
ConfiguratorNext
Tic
CheckConfigureInstallationForm
CheckPreferenceConfigurationItemListFrance
SetupInstallConfiguration
ConfiguratorNext
Tic
CheckInstallConfiguration
StartConfigurationInstallation
Tic
CheckInstanceIsConfiguredFrance
CheckValidAccountList
CheckAccountReference
CheckValidPersonList
CheckValidOrganisationList
CheckValidCurrencyList
CheckPublicGadgetList
> CheckPreferenceList
CheckModulesBusinessApplication
CheckBaseCategoryList
CheckOrganisationSite
CheckAccountingPeriod
CheckRuleValidation
File "/home/buildbot/slave/full.ERP5/build/unit_test.3/Products/ERP5Type/tests/Sequence.py", line 92, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5/build/unit_test.3/bt5/erp5_configurator_standard/TestTemplateItem/testStandardConfigurationWorkflow.py", line 1229, in stepCheckPreferenceList
self.assertEquals('dmy', preference_tool.getPreferredDateOrder())
AssertionError: 'dmy' != 'ymd'
ERROR: testUpdateBT5FromRepository (testTemplateTool.TestTemplateTool), Test the list of bt5 returned for upgrade
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.5/Products/ERP5/tests/testTemplateTool.py", line 62, in testUpdateBT5FromRepository
erp5_base.edit(revision=int(erp5_base.getRevision()) - 10)
ValueError: invalid literal for int(): <<<<<<< .mine
956=======
957>>>>>>> .r44291
ERROR: test_01a_InvoiceNewTradeConditionOrLineSupport (testTradeModelLine.TestTradeModelLineSale)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 574, in test_01a_InvoiceNewTradeConditionOrLineSupport
invoice = self.test_01_OrderWithSimpleTaxedAndDiscountedLines('invoice')
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 561, in test_01_OrderWithSimpleTaxedAndDiscountedLines
self.tic()
File "/home/buildbot/slave/full.ERP5/build/unit_test.2/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_744931398fa63568355ae76a26ca5fbc/portal_deliveries/sale_packing_list_builder', 'build', -1, 0), ('/erp5_portal_744931398fa63568355ae76a26ca5fbc/sale_order_module/2', 'expand', -2, 1)]
Last error message:
ValueError
It is not possible to match movements from movement collection updater <Delivery Simulation Rule at /erp5_portal_744931398fa63568355ae76a26ca5fbc/portal_rules/new_delivery_simulation_rule>, because it does not contain any tester configured as matching provider
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 211, in expand
Module Products.ERP5.Document.SimulationMovement, line 330, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 76, in getMovementCollectionDiff
ValueError: It is not possible to match movements from movement collection updater <Delivery Simulation Rule at /erp5_portal_744931398fa63568355ae76a26ca5fbc/portal_rules/new_delivery_simulation_rule>, because it does not contain any tester configured as matching provider
ERROR: test_01b_NewSimulation_InvoiceModifyQuantityAndSolveDivergency (testTradeModelLine.TestTradeModelLineSale)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 629, in test_01b_NewSimulation_InvoiceModifyQuantityAndSolveDivergency
invoice = self.test_01_OrderWithSimpleTaxedAndDiscountedLines('invoice')
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 561, in test_01_OrderWithSimpleTaxedAndDiscountedLines
self.tic()
File "/home/buildbot/slave/full.ERP5/build/unit_test.2/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_744931398fa63568355ae76a26ca5fbc/portal_deliveries/sale_packing_list_builder', 'build', -1, 0), ('/erp5_portal_744931398fa63568355ae76a26ca5fbc/sale_order_module/3', 'expand', -2, 1)]
Last error message:
ValueError
It is not possible to match movements from movement collection updater <Delivery Simulation Rule at /erp5_portal_744931398fa63568355ae76a26ca5fbc/portal_rules/new_delivery_simulation_rule>, because it does not contain any tester configured as matching provider
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 211, in expand
Module Products.ERP5.Document.SimulationMovement, line 330, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 76, in getMovementCollectionDiff
ValueError: It is not possible to match movements from movement collection updater <Delivery Simulation Rule at /erp5_portal_744931398fa63568355ae76a26ca5fbc/portal_rules/new_delivery_simulation_rule>, because it does not contain any tester configured as matching provider
ERROR: test_01c_PackingListSplitBuildInvoiceBuild (testTradeModelLine.TestTradeModelLineSale)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 645, in test_01c_PackingListSplitBuildInvoiceBuild
packing_list = \
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 561, in test_01_OrderWithSimpleTaxedAndDiscountedLines
self.tic()
File "/home/buildbot/slave/full.ERP5/build/unit_test.2/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_744931398fa63568355ae76a26ca5fbc/portal_deliveries/sale_packing_list_builder', 'build', -1, 0), ('/erp5_portal_744931398fa63568355ae76a26ca5fbc/sale_order_module/4', 'expand', -2, 1)]
Last error message:
ValueError
It is not possible to match movements from movement collection updater <Delivery Simulation Rule at /erp5_portal_744931398fa63568355ae76a26ca5fbc/portal_rules/new_delivery_simulation_rule>, because it does not contain any tester configured as matching provider
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 211, in expand
Module Products.ERP5.Document.SimulationMovement, line 330, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 76, in getMovementCollectionDiff
ValueError: It is not possible to match movements from movement collection updater <Delivery Simulation Rule at /erp5_portal_744931398fa63568355ae76a26ca5fbc/portal_rules/new_delivery_simulation_rule>, because it does not contain any tester configured as matching provider
ERROR: test_BuildTradeModelLineAndAccountingFromOrder (testTradeModelLine.TestTradeModelLineSale)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 888, in test_BuildTradeModelLineAndAccountingFromOrder
self.tic()
File "/home/buildbot/slave/full.ERP5/build/unit_test.2/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_744931398fa63568355ae76a26ca5fbc/portal_deliveries/sale_packing_list_builder', 'build', -1, 0), ('/erp5_portal_744931398fa63568355ae76a26ca5fbc/sale_order_module/6', 'expand', -2, 1)]
Last error message:
ValueError
It is not possible to match movements from movement collection updater <Delivery Simulation Rule at /erp5_portal_744931398fa63568355ae76a26ca5fbc/portal_rules/new_delivery_simulation_rule>, because it does not contain any tester configured as matching provider
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 211, in expand
Module Products.ERP5.Document.SimulationMovement, line 330, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 76, in getMovementCollectionDiff
ValueError: It is not possible to match movements from movement collection updater <Delivery Simulation Rule at /erp5_portal_744931398fa63568355ae76a26ca5fbc/portal_rules/new_delivery_simulation_rule>, because it does not contain any tester configured as matching provider
FAIL: test_01_OrderWithSimpleTaxedAndDiscountedLines (testTradeModelLine.TestTradeModelLineSale), Full test case with quite simple linear use case
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 519, in test_01_OrderWithSimpleTaxedAndDiscountedLines
self.checkComposition(movement, [trade_condition], {
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 368, in checkComposition
self.assertEqual(n, len(composed.objectValues(portal_type=portal_type)))
AssertionError: 11 != 14
FAIL: test_02_OrderWithComplexTaxedAndDiscountedLines (testTradeModelLine.TestTradeModelLineSale)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 770, in test_02_OrderWithComplexTaxedAndDiscountedLines
self.checkComposition(movement, [trade_condition], {
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 368, in checkComposition
self.assertEqual(n, len(composed.objectValues(portal_type=portal_type)))
AssertionError: 11 != 14
FAIL: test_BuildTradeModelLineAndAccountingFromInvoice (testTradeModelLine.TestTradeModelLineSale)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 982, in test_BuildTradeModelLineAndAccountingFromInvoice
self.assertEquals(1150, invoice.getTotalPrice())
AssertionError: 1150 != 1300.0
FAIL: test_tradeModelLineWithRounding (testTradeModelLine.TestTradeModelLineSale)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 1159, in test_tradeModelLineWithRounding
self.assertEqual(2, len(amount_list)) # XXX 1 or 2 ???
AssertionError: 2 != 1
ERROR: test_01a_InvoiceNewTradeConditionOrLineSupport (testTradeModelLinePurchase.TestTradeModelLinePurchase)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 574, in test_01a_InvoiceNewTradeConditionOrLineSupport
invoice = self.test_01_OrderWithSimpleTaxedAndDiscountedLines('invoice')
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 561, in test_01_OrderWithSimpleTaxedAndDiscountedLines
self.tic()
File "/home/buildbot/slave/full.ERP5/build/unit_test.2/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_db7e9a30b4dfc6c0fdbd382c6e2fbb92/portal_deliveries/purchase_packing_list_builder', 'build', -1, 0), ('/erp5_portal_db7e9a30b4dfc6c0fdbd382c6e2fbb92/purchase_order_module/2', 'expand', -2, 1)]
Last error message:
ValueError
It is not possible to match movements from movement collection updater <Delivery Simulation Rule at /erp5_portal_db7e9a30b4dfc6c0fdbd382c6e2fbb92/portal_rules/new_delivery_simulation_rule>, because it does not contain any tester configured as matching provider
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 211, in expand
Module Products.ERP5.Document.SimulationMovement, line 330, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 76, in getMovementCollectionDiff
ValueError: It is not possible to match movements from movement collection updater <Delivery Simulation Rule at /erp5_portal_db7e9a30b4dfc6c0fdbd382c6e2fbb92/portal_rules/new_delivery_simulation_rule>, because it does not contain any tester configured as matching provider
ERROR: test_01b_NewSimulation_InvoiceModifyQuantityAndSolveDivergency (testTradeModelLinePurchase.TestTradeModelLinePurchase)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 629, in test_01b_NewSimulation_InvoiceModifyQuantityAndSolveDivergency
invoice = self.test_01_OrderWithSimpleTaxedAndDiscountedLines('invoice')
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 561, in test_01_OrderWithSimpleTaxedAndDiscountedLines
self.tic()
File "/home/buildbot/slave/full.ERP5/build/unit_test.2/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_db7e9a30b4dfc6c0fdbd382c6e2fbb92/portal_deliveries/purchase_packing_list_builder', 'build', -1, 0), ('/erp5_portal_db7e9a30b4dfc6c0fdbd382c6e2fbb92/purchase_order_module/3', 'expand', -2, 1)]
Last error message:
ValueError
It is not possible to match movements from movement collection updater <Delivery Simulation Rule at /erp5_portal_db7e9a30b4dfc6c0fdbd382c6e2fbb92/portal_rules/new_delivery_simulation_rule>, because it does not contain any tester configured as matching provider
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 211, in expand
Module Products.ERP5.Document.SimulationMovement, line 330, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 76, in getMovementCollectionDiff
ValueError: It is not possible to match movements from movement collection updater <Delivery Simulation Rule at /erp5_portal_db7e9a30b4dfc6c0fdbd382c6e2fbb92/portal_rules/new_delivery_simulation_rule>, because it does not contain any tester configured as matching provider
ERROR: test_01c_PackingListSplitBuildInvoiceBuild (testTradeModelLinePurchase.TestTradeModelLinePurchase)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 645, in test_01c_PackingListSplitBuildInvoiceBuild
packing_list = \
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 561, in test_01_OrderWithSimpleTaxedAndDiscountedLines
self.tic()
File "/home/buildbot/slave/full.ERP5/build/unit_test.2/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_db7e9a30b4dfc6c0fdbd382c6e2fbb92/portal_deliveries/purchase_packing_list_builder', 'build', -1, 0), ('/erp5_portal_db7e9a30b4dfc6c0fdbd382c6e2fbb92/purchase_order_module/4', 'expand', -2, 1)]
Last error message:
ValueError
It is not possible to match movements from movement collection updater <Delivery Simulation Rule at /erp5_portal_db7e9a30b4dfc6c0fdbd382c6e2fbb92/portal_rules/new_delivery_simulation_rule>, because it does not contain any tester configured as matching provider
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 211, in expand
Module Products.ERP5.Document.SimulationMovement, line 330, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 76, in getMovementCollectionDiff
ValueError: It is not possible to match movements from movement collection updater <Delivery Simulation Rule at /erp5_portal_db7e9a30b4dfc6c0fdbd382c6e2fbb92/portal_rules/new_delivery_simulation_rule>, because it does not contain any tester configured as matching provider
ERROR: test_BuildTradeModelLineAndAccountingFromOrder (testTradeModelLinePurchase.TestTradeModelLinePurchase)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 888, in test_BuildTradeModelLineAndAccountingFromOrder
self.tic()
File "/home/buildbot/slave/full.ERP5/build/unit_test.2/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 179, in tic
raise RuntimeError(error_message)
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_db7e9a30b4dfc6c0fdbd382c6e2fbb92/portal_deliveries/purchase_packing_list_builder', 'build', -1, 0), ('/erp5_portal_db7e9a30b4dfc6c0fdbd382c6e2fbb92/purchase_order_module/6', 'expand', -2, 1)]
Last error message:
ValueError
It is not possible to match movements from movement collection updater <Delivery Simulation Rule at /erp5_portal_db7e9a30b4dfc6c0fdbd382c6e2fbb92/portal_rules/new_delivery_simulation_rule>, because it does not contain any tester configured as matching provider
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 303, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 788, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 211, in expand
Module Products.ERP5.Document.SimulationMovement, line 330, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 71, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 104, in unrestricted_apply
Module Products.ERP5.Document.AppliedRule, line 112, in expand
Module Products.ERP5.mixin.rule, line 208, in expand
Module Products.ERP5.mixin.movement_collection_updater, line 162, in updateMovementCollection
Module Products.ERP5.mixin.movement_collection_updater, line 76, in getMovementCollectionDiff
ValueError: It is not possible to match movements from movement collection updater <Delivery Simulation Rule at /erp5_portal_db7e9a30b4dfc6c0fdbd382c6e2fbb92/portal_rules/new_delivery_simulation_rule>, because it does not contain any tester configured as matching provider
FAIL: test_01_OrderWithSimpleTaxedAndDiscountedLines (testTradeModelLinePurchase.TestTradeModelLinePurchase), Full test case with quite simple linear use case
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 519, in test_01_OrderWithSimpleTaxedAndDiscountedLines
self.checkComposition(movement, [trade_condition], {
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 368, in checkComposition
self.assertEqual(n, len(composed.objectValues(portal_type=portal_type)))
AssertionError: 11 != 14
FAIL: test_02_OrderWithComplexTaxedAndDiscountedLines (testTradeModelLinePurchase.TestTradeModelLinePurchase)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 770, in test_02_OrderWithComplexTaxedAndDiscountedLines
self.checkComposition(movement, [trade_condition], {
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 368, in checkComposition
self.assertEqual(n, len(composed.objectValues(portal_type=portal_type)))
AssertionError: 11 != 14
FAIL: test_BuildTradeModelLineAndAccountingFromInvoice (testTradeModelLinePurchase.TestTradeModelLinePurchase)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 982, in test_BuildTradeModelLineAndAccountingFromInvoice
self.assertEquals(1150, invoice.getTotalPrice())
AssertionError: 1150 != 1300.0
FAIL: test_tradeModelLineWithRounding (testTradeModelLinePurchase.TestTradeModelLinePurchase)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/Products/ERP5/tests/testTradeModelLine.py", line 1159, in test_tradeModelLineWithRounding
self.assertEqual(2, len(amount_list)) # XXX 1 or 2 ???
AssertionError: 2 != 1
FAIL: testERP5Site_checkIfUserExistUsingHttpRequest (testUNG.TestUNG), Test script ERP5Site_checkIfUserExist to simulate the browser request
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.5/bt5/erp5_web_ung_theme/TestTemplateItem/testUNG.py", line 305, in testERP5Site_checkIfUserExistUsingHttpRequest
self.assertEquals(response, {'response': False})
AssertionError: {u'response': True} != {'response': False}
FAIL: testBase_getPreferencePathList (testUNGSecurity.TestUNGSecurity), Test if with normal user the paths of preference objects are returned correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.4/bt5/erp5_web_ung_role/TestTemplateItem/testUNGSecurity.py", line 199, in testBase_getPreferencePathList
self.assertEquals(preference_dict, {u'preference': u'portal_preferences/1'})
AssertionError: {} != {u'preference': u'portal_preferences/1'}
FAIL: test_04_dynamic_variables (testWorklist.TestWorklist)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.6/Products/ERP5/tests/testWorklist.py", line 525, in test_04_dynamic_variables
url_parameter_dict=url_parameter_dict)
File "/home/buildbot/slave/full.ERP5/build/unit_test.6/Products/ERP5/tests/testWorklist.py", line 212, in checkWorklist
self.assertEquals(len(entry_list), count and 1)
AssertionError: 0 != 1
FAIL: test_duplicatingSelectionNameInListbox (testXHTML.TestXHTML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5/build/unit_test.6/Products/ERP5/tests/testXHTML.py", line 251, in test_duplicatingSelectionNameInListbox
"Repeated listbox selection names:\n" +
AssertionError: Repeated listbox selection names:
'entity_support_request_selection'
'Base_viewEventList/ticket_listbox': ['erp5_crm']
'Entity_viewEventList/support_request_listbox': ['erp5_crm']
'entity_related_event_selection'
'Base_viewEventList/listbox': ['erp5_crm']
'Entity_viewEventList/listbox': ['erp5_crm']
'project_monthly_report_selection'
'Project_viewMonthlySummaryReportData/listbox': ['erp5_project']
'Project_viewMonthlyReportData/listbox': ['erp5_project']
More information about the Erp5-report
mailing list