[Erp5-report] ERP5 r35989 : 3576 Tests, 191 Errors, 184 Failures, 45 Skips
nobody at svn.erp5.org
nobody at svn.erp5.org
Fri Jun 4 15:59:07 CEST 2010
Test Suite: ERP5
Revision: 35989
Result: FAIL
All tests: 3576
Failures: 184
Errors: 191
Skips: 45
The following tests failed:
testAccounting (39 errors)
test_AccountingPeriodRefusesWrongDateTransactionValidation (testAccounting.TestAccountingWithSequences), Accounting Periods prevents transactions from being validated when there
test_AccountingTransactionValidationAccounts (testAccounting.TestAccountingWithSequences), Transaction validation and accounts
test_AccountingTransactionValidationBalanced (testAccounting.TestAccountingWithSequences), Transaction validation and balance
test_AccountingTransactionValidationCurrency (testAccounting.TestAccountingWithSequences), Transaction validation and currency
test_AccountingTransactionValidationDate (testAccounting.TestAccountingWithSequences), Transaction validation and dates
test_AccountingTransactionValidationPayment (testAccounting.TestAccountingWithSequences), Transaction validation and payment
test_AccountingTransactionValidationRemoveEmptyLines (testAccounting.TestAccountingWithSequences), Transaction validation removes empty lines
test_AccountingTransactionValidationSection (testAccounting.TestAccountingWithSequences), Transaction validation and section
test_createAccountingTransaction (testAccounting.TestAccountingWithSequences), Make sure acounting transactions created by createAccountingTransaction
test_Invoice_createRelatedPaymentTransactionDifferentSection (testAccounting.TestTransactions)
test_Invoice_createRelatedPaymentTransactionGroupedLines (testAccounting.TestTransactions)
test_Invoice_createRelatedPaymentTransactionRelatedInvoice (testAccounting.TestTransactions)
test_Invoice_createRelatedPaymentTransactionRelatedInvoiceDifferentSide (testAccounting.TestTransactions)
test_Invoice_createRelatedPaymentTransactionRelatedInvoiceDraft (testAccounting.TestTransactions)
test_Invoice_createRelatedPaymentTransactionSimple (testAccounting.TestTransactions)
test_SourceDestinationReference (testAccounting.TestTransactions)
test_SourceDestinationReferenceGroupAccounting (testAccounting.TestTransactions)
test_AccountingTransactionValidationAfterPeriod (testAccounting.TestTransactionValidation)
test_AccountingTransactionValidationBeforePeriod (testAccounting.TestTransactionValidation)
test_AccountingTransactionValidationRecursivePeriod (testAccounting.TestTransactionValidation)
test_AccountingTransactionValidationRefusedWithCategoriesAsSections (testAccounting.TestTransactionValidation)
test_AccountingTransactionValidationStartDate (testAccounting.TestTransactionValidation)
test_AccountingWorkflow (testAccounting.TestTransactionValidation)
test_CancellationAmount (testAccounting.TestTransactionValidation)
test_DestinationPaymentTransactionValidationDate (testAccounting.TestTransactionValidation)
test_NonBalancedAccountingTransaction (testAccounting.TestTransactionValidation)
test_NonBalancedAccountingTransactionDifferentSectionOnLines (testAccounting.TestTransactionValidation)
test_NonBalancedAccountingTransactionSectionOnLines (testAccounting.TestTransactionValidation)
test_NonBalancedAccountingTransactionSectionPersonOnLines (testAccounting.TestTransactionValidation)
test_NonBalancedDestinationAccountingTransaction (testAccounting.TestTransactionValidation)
test_NonBalancedDestinationAccountingTransactionNoAccount (testAccounting.TestTransactionValidation)
test_PaymentTransactionValidationCheckBankAccountPriceCurrency (testAccounting.TestTransactionValidation)
test_PaymentTransactionValidationDate (testAccounting.TestTransactionValidation)
test_PaymentTransactionWithEmployee (testAccounting.TestTransactionValidation)
test_PurchaseInvoiceTransactionValidationDate (testAccounting.TestTransactionValidation)
test_SaleInvoiceTransactionValidationDate (testAccounting.TestTransactionValidation)
test_UneededDestinationAssetPrice (testAccounting.TestTransactionValidation)
test_UneededSourceAssetPrice (testAccounting.TestTransactionValidation)
test_UnusedSectionTransactionValidationDate (testAccounting.TestTransactionValidation)
testAccountingRules (16 errors)
test_04_SimpleInvoice (testAccountingRules.TestSaleAccountingRules), Simple Invoice.
test_04b_SimpleInvoiceConfirm (testAccountingRules.TestSaleAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 lines.
test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestSaleAccountingRules), Add a new line then updateAppliedRule.
test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestSaleAccountingRules), Tests that editing a line updates simulation correctly
test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestSaleAccountingRules), Tests that removing a line updates simulation correctly
test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestSaleAccountingRules), Tests that updating an applied rule many times doesn't break the
test_06_MultiLineInvoice (testAccountingRules.TestSaleAccountingRules), Multiple lines invoice.
test_04_SimpleInvoice (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice.
test_04b_SimpleInvoiceConfirm (testAccountingRules.TestPurchaseAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 lines.
test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestPurchaseAccountingRules), Add a new line then updateAppliedRule.
test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestPurchaseAccountingRules), Tests that editing a line updates simulation correctly
test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestPurchaseAccountingRules), Tests that removing a line updates simulation correctly
test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestPurchaseAccountingRules), Tests that updating an applied rule many times doesn't break the
test_06_MultiLineInvoice (testAccountingRules.TestPurchaseAccountingRules), Multiple lines invoice.
testAdvancedInvoicing (7 failures, 11 errors)
test_02_InvoiceDeletePackingListLine (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_03_InvoiceDecreaseQuantity (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_04_InvoiceChangeStartDateFail (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_07_SplitAndDeferInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_08_AcceptDecisionOnInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_10_ManuallyAddedMovements (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_11_ManuallyAddedMovementsManyTransactions (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_12_compareInvoiceAndPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_13_acceptQuantityDivergenceOnInvoiceWithStartedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_AcceptQuantityDivergenceOnInvoiceWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice), Accept divergence with stopped packing list
test_AcceptQuantityDivergenceOnInvoiceWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), Accept divergence with stopped packing list
test_01_TwoInvoicesFromTwoPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_05_AcceptDecisionOnPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_06_AcceptDecisionOnPackingListAndInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice), Adopt quantity with stopped packing list
test_CreatingAccountingTransactionThroughInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice), test creating simple invoice and accounting transaction
test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), Adopt quantity with stopped packing list
test_CreatingAccountingTransactionThroughInvoice (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), test creating simple invoice and accounting transaction
testConversionInSimulation (2 failures)
test_01_diverged_purchase_packing_list_source_total_asset_price (testConversionInSimulation.TestConversionInSimulation)
test_01_diverged_sale_packing_list_destination_total_asset_price (testConversionInSimulation.TestConversionInSimulation)
testDeliveryBuilderToSupportMultipleLines (4 errors)
test_01_IfNested (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
test_02_AdoptingPrevision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
test_03_AcceptingDecision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
test_04_MergingMultipleSaleOrders (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
testDivergenceTester (4 failures)
test_01_QuantityDivergenceTester (testDivergenceTester.TestDivergenceTester)
test_02_CategoryDivergenceTester (testDivergenceTester.TestDivergenceTester)
test_03_PropertyDivergenceTester (testDivergenceTester.TestDivergenceTester)
test_04_CategoryDivergenceTester (testDivergenceTester.TestDivergenceTester)
testDms (3 errors)
test_Image_conversion_to_base_format_no_original_format_access (testDms.TestDocument), Checks Document.Image
test_Text_conversion_to_base_format_no_original_format_access (testDms.TestDocument), Checks Document.OOoDocument
test_WebPage_conversion_to_base_format_no_original_format_access (testDms.TestDocument), Checks Document.TextDocument
testDmsWithFlare (3 errors)
test_Image_conversion_to_base_format_no_original_format_access (testDmsWithFlare.TestDocumentWithFlare), Checks Document.Image
test_Text_conversion_to_base_format_no_original_format_access (testDmsWithFlare.TestDocumentWithFlare), Checks Document.OOoDocument
test_WebPage_conversion_to_base_format_no_original_format_access (testDmsWithFlare.TestDocumentWithFlare), Checks Document.TextDocument
testERP5CurrencyExchangeLine (1 failures)
test_CreateCELWithNoBasePrice (testERP5CurrencyExchangeLine.TestCurrencyExchangeLine)
testERP5Simulation (25 failures, 13 errors, 5 skips)
test_01_SimpleInvoice (testERP5Simulation.TestERP5SimulationInvoice)
test_03_InvoiceEditAndInvoiceRule (testERP5Simulation.TestERP5SimulationInvoice)
test_06_InvoiceDeletePackingListLine (testERP5Simulation.TestERP5SimulationInvoice)
test_07_InvoiceAddPackingListLine (testERP5Simulation.TestERP5SimulationInvoice)
test_08_InvoiceDecreaseQuantity (testERP5Simulation.TestERP5SimulationInvoice)
test_09_InvoiceChangeStartDateFail (testERP5Simulation.TestERP5SimulationInvoice)
test_09b_InvoiceChangeStartDateSucceed (testERP5Simulation.TestERP5SimulationInvoice)
test_13_SplitAndDeferInvoice (testERP5Simulation.TestERP5SimulationInvoice)
test_14_AcceptDecisionOnInvoice (testERP5Simulation.TestERP5SimulationInvoice)
test_16_ManuallyAddedMovements (testERP5Simulation.TestERP5SimulationInvoice)
test_16a_ManuallyAddedMovementsManyTransactions (testERP5Simulation.TestERP5SimulationInvoice)
test_17_ManuallyAddedWrongMovements (testERP5Simulation.TestERP5SimulationInvoice)
test_18_compareInvoiceAndPackingList (testERP5Simulation.TestERP5SimulationInvoice)
test_01_splitAndDefer (testERP5Simulation.TestERP5Simulation)
test_01_PackingListDecreaseQuantity (testERP5Simulation.TestERP5SimulationPackingList)
test_02_PackingListChangeDestination (testERP5Simulation.TestERP5SimulationPackingList)
test_04_PackingListDeleteLine (testERP5Simulation.TestERP5SimulationPackingList)
test_05_SimulationChangeQuantity (testERP5Simulation.TestERP5SimulationPackingList)
test_05a_SimulationChangeQuantityAndAcceptDecision (testERP5Simulation.TestERP5SimulationPackingList)
test_05b_SimulationChangeQuantityForMergedLine (testERP5Simulation.TestERP5SimulationPackingList)
test_05c_SimulationChangeQuantityAndAcceptDecisionForMergedLine (testERP5Simulation.TestERP5SimulationPackingList)
test_05e_SimulationUnifyResourceOnSimulationMovementsForNonMergedLines (testERP5Simulation.TestERP5SimulationPackingList)
test_05f_SimulationChangeAndPartialAcceptDecision (testERP5Simulation.TestERP5SimulationPackingList)
test_08_AddContainers (testERP5Simulation.TestERP5SimulationPackingList)
test_09_AddContainersWithVariatedResources (testERP5Simulation.TestERP5SimulationPackingList)
test_10_PackingListIncreaseQuantity (testERP5Simulation.TestERP5SimulationPackingList)
test_11_PackingListDecreaseTwoTimesQuantityAndUpdateDelivery (testERP5Simulation.TestERP5SimulationPackingList)
test_12_PackingListLineChangeResource (testERP5Simulation.TestERP5SimulationPackingList)
test_17_PackingListOrderLineWithAccount (testERP5Simulation.TestERP5SimulationPackingList)
test_SplitAndDeferDoNothing (testERP5Simulation.TestERP5SimulationPackingList)
test_02_TwoInvoicesFromTwoPackingList (testERP5Simulation.TestERP5SimulationInvoice)
test_10_AcceptDecisionOnPackingList (testERP5Simulation.TestERP5SimulationInvoice)
test_11_AcceptDecisionOnPackingListAndInvoice (testERP5Simulation.TestERP5SimulationInvoice)
test_12_SplitPackingListAndAcceptInvoice (testERP5Simulation.TestERP5SimulationInvoice)
test_Reference (testERP5Simulation.TestERP5SimulationInvoice)
test_accept_quantity_divergence_on_invoice_with_started_packing_list (testERP5Simulation.TestERP5SimulationInvoice)
test_accept_quantity_divergence_on_invoice_with_stopped_packing_list (testERP5Simulation.TestERP5SimulationInvoice)
test_adopt_quantity_divergence_on_invoice_line_with_stopped_packing_list (testERP5Simulation.TestERP5SimulationInvoice)
testFormPrintoutAsODT (1 failures, 1 skips)
test_02_Table_07_CellFormat (testFormPrintoutAsODT.TestFormPrintoutAsODT), 7. Normal case: make sure that it is enable to use ODF cell format setting in FormPrintout
testICal (1 failures)
test_01_renderEvent (testICal.TestICal)
testImmobilisation (4 failures, 15 errors)
test_03_complexItemStructureImmobilisationStateChange (testImmobilisation.TestImmobilisation)
test_04_TestContinuousMethodMovementValidity (testImmobilisation.TestImmobilisation)
test_05_TestImmobilisationPeriodsWithContinuousMethodDuringContinuousTime (testImmobilisation.TestImmobilisation)
test_06_TestImmobilisationPeriodsWithContinuousMethodDuringUncontinuousTime (testImmobilisation.TestImmobilisation)
test_07_TestImmobilisationPeriodsWithUncontinuousMethodDuringContinuousTime (testImmobilisation.TestImmobilisation)
test_08_TestImmobilisationPeriodsWithUncontinuousMethodDuringUncontinuousTime (testImmobilisation.TestImmobilisation)
test_09_TestAmortisationPriceAndSimulationForLinearAmortisation (testImmobilisation.TestImmobilisation)
test_10_TestAmortisationPriceForDegressiveAmortisation (testImmobilisation.TestImmobilisation)
test_11_TestAmortisationPriceAndSimulationForUncontinuousDegressiveAmortisation (testImmobilisation.TestImmobilisation)
test_12_TestAmortisationPriceForActualUseDegressiveAmortisation (testImmobilisation.TestImmobilisation)
test_13_TestAmortisationPriceForNoAmortisationMethod (testImmobilisation.TestImmobilisation)
test_14_TestOwnerChangeSimulationForContinuousAmortisationMethod (testImmobilisation.TestImmobilisation)
test_15_TestOwnerChangeSimulationForUnContinuousAmortisationMethod (testImmobilisation.TestImmobilisation)
test_16_TestOwnerChangeSimulationForContinuousAmortisationMethod (testImmobilisation.TestImmobilisation)
test_17_TestMonthlyAmortisation (testImmobilisation.TestImmobilisation)
test_18_TestAccountingBuilding (testImmobilisation.TestImmobilisation)
test_19_TestAccountingBuildingAndDivergence (testImmobilisation.TestImmobilisation)
test_20_TestAccountingAcceptDecisionSolver (testImmobilisation.TestImmobilisation)
test_21_TestSimulationBuildingWithValidatedTransactions (testImmobilisation.TestImmobilisation)
testInvalidationBug (2 failures)
testCommitOrder (testInvalidationBug.TestInvalidationBug), Check order of resources being committed
testLateInvalidationFromZEO (testInvalidationBug.TestInvalidationBug)
testInventory (1 errors)
test_02_InventoryModule (testInventory.TestInventory)
testInvoice (9 failures, 13 errors)
test_01_SimpleInvoice (testInvoice.TestSaleInvoice)
test_03_InvoiceEditAndInvoiceRule (testInvoice.TestSaleInvoice)
test_06_InvoiceDeletePackingListLine (testInvoice.TestSaleInvoice)
test_07_InvoiceAddPackingListLine (testInvoice.TestSaleInvoice)
test_08_InvoiceDecreaseQuantity (testInvoice.TestSaleInvoice)
test_09_InvoiceChangeStartDateFail (testInvoice.TestSaleInvoice)
test_09b_InvoiceChangeStartDateSucceed (testInvoice.TestSaleInvoice)
test_13_SplitAndDeferInvoice (testInvoice.TestSaleInvoice)
test_14_AcceptDecisionOnInvoice (testInvoice.TestSaleInvoice)
test_16_ManuallyAddedMovements (testInvoice.TestSaleInvoice)
test_16a_ManuallyAddedMovementsManyTransactions (testInvoice.TestSaleInvoice)
test_17_ManuallyAddedWrongMovements (testInvoice.TestSaleInvoice)
test_18_compareInvoiceAndPackingList (testInvoice.TestSaleInvoice)
test_02_TwoInvoicesFromTwoPackingList (testInvoice.TestSaleInvoice)
test_10_AcceptDecisionOnPackingList (testInvoice.TestSaleInvoice)
test_11_AcceptDecisionOnPackingListAndInvoice (testInvoice.TestSaleInvoice)
test_12_SplitPackingListAndAcceptInvoice (testInvoice.TestSaleInvoice)
test_accept_quantity_divergence_on_invoice_with_started_packing_list (testInvoice.TestSaleInvoice)
test_accept_quantity_divergence_on_invoice_with_stopped_packing_list (testInvoice.TestSaleInvoice)
test_adopt_quantity_divergence_on_invoice_line_with_stopped_packing_list (testInvoice.TestSaleInvoice)
test_accept_quantity_divergence_on_invoice_with_stopped_packing_list (testInvoice.TestPurchaseInvoice)
test_adopt_quantity_divergence_on_invoice_line_with_stopped_packing_list (testInvoice.TestPurchaseInvoice)
testItem (1 failures, 1 errors)
test_02_ItemWithInvoice (testItem.TestItem)
test_01_ItemSimpleTest (testItem.TestItem)
testLegacyInvoice (9 failures, 13 errors)
test_01_SimpleInvoice (testLegacyInvoice.TestSaleInvoice)
test_03_InvoiceEditAndInvoiceRule (testLegacyInvoice.TestSaleInvoice)
test_06_InvoiceDeletePackingListLine (testLegacyInvoice.TestSaleInvoice)
test_07_InvoiceAddPackingListLine (testLegacyInvoice.TestSaleInvoice)
test_08_InvoiceDecreaseQuantity (testLegacyInvoice.TestSaleInvoice)
test_09_InvoiceChangeStartDateFail (testLegacyInvoice.TestSaleInvoice)
test_09b_InvoiceChangeStartDateSucceed (testLegacyInvoice.TestSaleInvoice)
test_13_SplitAndDeferInvoice (testLegacyInvoice.TestSaleInvoice)
test_14_AcceptDecisionOnInvoice (testLegacyInvoice.TestSaleInvoice)
test_16_ManuallyAddedMovements (testLegacyInvoice.TestSaleInvoice)
test_16a_ManuallyAddedMovementsManyTransactions (testLegacyInvoice.TestSaleInvoice)
test_17_ManuallyAddedWrongMovements (testLegacyInvoice.TestSaleInvoice)
test_18_compareInvoiceAndPackingList (testLegacyInvoice.TestSaleInvoice)
test_02_TwoInvoicesFromTwoPackingList (testLegacyInvoice.TestSaleInvoice)
test_10_AcceptDecisionOnPackingList (testLegacyInvoice.TestSaleInvoice)
test_11_AcceptDecisionOnPackingListAndInvoice (testLegacyInvoice.TestSaleInvoice)
test_12_SplitPackingListAndAcceptInvoice (testLegacyInvoice.TestSaleInvoice)
test_accept_quantity_divergence_on_invoice_with_started_packing_list (testLegacyInvoice.TestSaleInvoice)
test_accept_quantity_divergence_on_invoice_with_stopped_packing_list (testLegacyInvoice.TestSaleInvoice)
test_adopt_quantity_divergence_on_invoice_line_with_stopped_packing_list (testLegacyInvoice.TestSaleInvoice)
test_accept_quantity_divergence_on_invoice_with_stopped_packing_list (testLegacyInvoice.TestPurchaseInvoice)
test_adopt_quantity_divergence_on_invoice_line_with_stopped_packing_list (testLegacyInvoice.TestPurchaseInvoice)
testLegacyPackingList (38 failures)
test_01_PackingListDecreaseQuantity (testLegacyPackingList.TestPackingList)
test_02_PackingListChangeDestination (testLegacyPackingList.TestPackingList)
test_03_PackingListChangeStartDate (testLegacyPackingList.TestPackingList)
test_04_PackingListDeleteLine (testLegacyPackingList.TestPackingList)
test_05_SimulationChangeQuantity (testLegacyPackingList.TestPackingList)
test_05a_SimulationChangeQuantityAndAcceptDecision (testLegacyPackingList.TestPackingList)
test_05b_SimulationChangeQuantityForMergedLine (testLegacyPackingList.TestPackingList)
test_05c_SimulationChangeQuantityAndAcceptDecisionForMergedLine (testLegacyPackingList.TestPackingList)
test_05d_SimulationChangeResourceOnOneSimulationMovementForMergedLine (testLegacyPackingList.TestPackingList)
test_05e_SimulationUnifyResourceOnSimulationMovementsForNonMergedLines (testLegacyPackingList.TestPackingList)
test_05f_SimulationChangeAndPartialAcceptDecision (testLegacyPackingList.TestPackingList)
test_06_SimulationChangeStartDate (testLegacyPackingList.TestPackingList)
test_07_SimulationChangeStartDateWithTwoOrderLine (testLegacyPackingList.TestPackingList)
test_07a_SimulationChangeStartDateWithTwoOrderLine (testLegacyPackingList.TestPackingList)
test_08_AddContainers (testLegacyPackingList.TestPackingList)
test_10_PackingListIncreaseQuantity (testLegacyPackingList.TestPackingList)
test_11_PackingListDecreaseTwoTimesQuantityAndUpdateDelivery (testLegacyPackingList.TestPackingList)
test_12_PackingListLineChangeResource (testLegacyPackingList.TestPackingList)
test_SplitAndDeferDoNothing (testLegacyPackingList.TestPackingList)
test_01_PackingListDecreaseQuantity (testLegacyPackingList.TestPurchasePackingList)
test_02_PackingListChangeDestination (testLegacyPackingList.TestPurchasePackingList)
test_03_PackingListChangeStartDate (testLegacyPackingList.TestPurchasePackingList)
test_04_PackingListDeleteLine (testLegacyPackingList.TestPurchasePackingList)
test_05_SimulationChangeQuantity (testLegacyPackingList.TestPurchasePackingList)
test_05a_SimulationChangeQuantityAndAcceptDecision (testLegacyPackingList.TestPurchasePackingList)
test_05b_SimulationChangeQuantityForMergedLine (testLegacyPackingList.TestPurchasePackingList)
test_05c_SimulationChangeQuantityAndAcceptDecisionForMergedLine (testLegacyPackingList.TestPurchasePackingList)
test_05d_SimulationChangeResourceOnOneSimulationMovementForMergedLine (testLegacyPackingList.TestPurchasePackingList)
test_05e_SimulationUnifyResourceOnSimulationMovementsForNonMergedLines (testLegacyPackingList.TestPurchasePackingList)
test_05f_SimulationChangeAndPartialAcceptDecision (testLegacyPackingList.TestPurchasePackingList)
test_06_SimulationChangeStartDate (testLegacyPackingList.TestPurchasePackingList)
test_07_SimulationChangeStartDateWithTwoOrderLine (testLegacyPackingList.TestPurchasePackingList)
test_07a_SimulationChangeStartDateWithTwoOrderLine (testLegacyPackingList.TestPurchasePackingList)
test_08_AddContainers (testLegacyPackingList.TestPurchasePackingList)
test_10_PackingListIncreaseQuantity (testLegacyPackingList.TestPurchasePackingList)
test_11_PackingListDecreaseTwoTimesQuantityAndUpdateDelivery (testLegacyPackingList.TestPurchasePackingList)
test_12_PackingListLineChangeResource (testLegacyPackingList.TestPurchasePackingList)
test_SplitAndDeferDoNothing (testLegacyPackingList.TestPurchasePackingList)
testLegacyProductionPackingList (1 failures)
test_01_sourcingDelivery (testLegacyProductionPackingList.TestProductionDelivery)
testLegacyTaxLineTradeCondition (10 failures)
test_tax_line_build (testLegacyTaxLineTradeCondition.TestTaxLineOrderSimulationSaleOrder)
test_tax_line_build_accounting (testLegacyTaxLineTradeCondition.TestTaxLineOrderSimulationSaleOrder)
test_tax_line_merged_build (testLegacyTaxLineTradeCondition.TestTaxLineOrderSimulationSaleOrder)
test_tax_line_updated_on_invoice_line_change (testLegacyTaxLineTradeCondition.TestTaxLineOrderSimulationSaleOrder)
test_tax_line_build (testLegacyTaxLineTradeCondition.TestTaxLineOrderSimulationPurchaseOrder)
test_tax_line_build_accounting (testLegacyTaxLineTradeCondition.TestTaxLineOrderSimulationPurchaseOrder)
test_tax_line_merged_build (testLegacyTaxLineTradeCondition.TestTaxLineOrderSimulationPurchaseOrder)
test_tax_line_updated_on_invoice_line_change (testLegacyTaxLineTradeCondition.TestTaxLineOrderSimulationPurchaseOrder)
test_tax_line_simulation (testLegacyTaxLineTradeCondition.TestTaxLineInvoiceSimulationPurchaseInvoice)
test_tax_line_simulation (testLegacyTaxLineTradeCondition.TestTaxLineInvoiceSimulationSaleInvoice)
testOpenOrder (2 failures, 1 errors)
testOpenOrderRule (testOpenOrder.TestOpenOrder)
testBuildingSaleOrder (testOpenOrder.TestOpenOrder)
testPeriodicityDateList (testOpenOrder.TestOpenOrder)
testPackingList (40 failures)
test_01_PackingListDecreaseQuantity (testPackingList.TestPackingList)
test_02_PackingListChangeDestination (testPackingList.TestPackingList)
test_03_PackingListChangeStartDate (testPackingList.TestPackingList)
test_04_PackingListDeleteLine (testPackingList.TestPackingList)
test_05_SimulationChangeQuantity (testPackingList.TestPackingList)
test_05a_SimulationChangeQuantityAndAcceptDecision (testPackingList.TestPackingList)
test_05b_SimulationChangeQuantityForMergedLine (testPackingList.TestPackingList)
test_05c_SimulationChangeQuantityAndAcceptDecisionForMergedLine (testPackingList.TestPackingList)
test_05d_SimulationChangeResourceOnOneSimulationMovementForMergedLine (testPackingList.TestPackingList)
test_05e_SimulationUnifyResourceOnSimulationMovementsForNonMergedLines (testPackingList.TestPackingList)
test_05f_SimulationChangeAndPartialAcceptDecision (testPackingList.TestPackingList)
test_06_SimulationChangeStartDate (testPackingList.TestPackingList)
test_07_SimulationChangeStartDateWithTwoOrderLine (testPackingList.TestPackingList)
test_07a_SimulationChangeStartDateWithTwoOrderLine (testPackingList.TestPackingList)
test_08_AddContainers (testPackingList.TestPackingList)
test_10_PackingListIncreaseQuantity (testPackingList.TestPackingList)
test_11_PackingListDecreaseTwoTimesQuantityAndUpdateDelivery (testPackingList.TestPackingList)
test_12_PackingListLineChangeResource (testPackingList.TestPackingList)
test_17_PackingListOrderLineWithAccount (testPackingList.TestPackingList)
test_SplitAndDeferDoNothing (testPackingList.TestPackingList)
test_01_PackingListDecreaseQuantity (testPackingList.TestPurchasePackingList)
test_02_PackingListChangeDestination (testPackingList.TestPurchasePackingList)
test_03_PackingListChangeStartDate (testPackingList.TestPurchasePackingList)
test_04_PackingListDeleteLine (testPackingList.TestPurchasePackingList)
test_05_SimulationChangeQuantity (testPackingList.TestPurchasePackingList)
test_05a_SimulationChangeQuantityAndAcceptDecision (testPackingList.TestPurchasePackingList)
test_05b_SimulationChangeQuantityForMergedLine (testPackingList.TestPurchasePackingList)
test_05c_SimulationChangeQuantityAndAcceptDecisionForMergedLine (testPackingList.TestPurchasePackingList)
test_05d_SimulationChangeResourceOnOneSimulationMovementForMergedLine (testPackingList.TestPurchasePackingList)
test_05e_SimulationUnifyResourceOnSimulationMovementsForNonMergedLines (testPackingList.TestPurchasePackingList)
test_05f_SimulationChangeAndPartialAcceptDecision (testPackingList.TestPurchasePackingList)
test_06_SimulationChangeStartDate (testPackingList.TestPurchasePackingList)
test_07_SimulationChangeStartDateWithTwoOrderLine (testPackingList.TestPurchasePackingList)
test_07a_SimulationChangeStartDateWithTwoOrderLine (testPackingList.TestPurchasePackingList)
test_08_AddContainers (testPackingList.TestPurchasePackingList)
test_10_PackingListIncreaseQuantity (testPackingList.TestPurchasePackingList)
test_11_PackingListDecreaseTwoTimesQuantityAndUpdateDelivery (testPackingList.TestPurchasePackingList)
test_12_PackingListLineChangeResource (testPackingList.TestPurchasePackingList)
test_17_PackingListOrderLineWithAccount (testPackingList.TestPurchasePackingList)
test_SplitAndDeferDoNothing (testPackingList.TestPurchasePackingList)
testPackingListRoundingPrecision (20 failures)
test_01_PackingListDecreaseQuantity (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_02_PackingListChangeDestination (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_03_PackingListChangeStartDate (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_04_PackingListDeleteLine (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_05_SimulationChangeQuantity (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_05a_SimulationChangeQuantityAndAcceptDecision (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_05b_SimulationChangeQuantityForMergedLine (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_05c_SimulationChangeQuantityAndAcceptDecisionForMergedLine (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_05d_SimulationChangeResourceOnOneSimulationMovementForMergedLine (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_05e_SimulationUnifyResourceOnSimulationMovementsForNonMergedLines (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_05f_SimulationChangeAndPartialAcceptDecision (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_06_SimulationChangeStartDate (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_07_SimulationChangeStartDateWithTwoOrderLine (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_07a_SimulationChangeStartDateWithTwoOrderLine (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_08_AddContainers (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_10_PackingListIncreaseQuantity (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_11_PackingListDecreaseTwoTimesQuantityAndUpdateDelivery (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_12_PackingListLineChangeResource (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_17_PackingListOrderLineWithAccount (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_SplitAndDeferDoNothing (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
testProductionPackingList (1 failures)
test_01_sourcingDelivery (testProductionPackingList.TestProductionDelivery)
testProductionPackingListApparel (1 failures)
test_01_sourcingDelivery (testProductionPackingListApparel.TestProductionDeliveryApparel)
testSerializeForm (1 failures)
test checking if the field values are of the proper type.
testTask (1 failures)
test_03_testTaskReportBasicUseCase (testTask.TestTask)
testTaskReportDivergence (3 failures)
test_01_TestReportLineChangeQuantity (testTaskReportDivergence.TestTaskReportDivergence)
test_02_TestReportListChangeDestination (testTaskReportDivergence.TestTaskReportDivergence)
test_03_TaskReportChangeStartDate (testTaskReportDivergence.TestTaskReportDivergence)
testTradeModelLine (29 errors)
test_TradeModelRuleSimulationBuildInvoice (testTradeModelLine.TestTradeModelLineSale)
test_TradeModelRuleSimulationBuildInvoice (testTradeModelLine.TestTradeModelLineSale)
test_TradeModelRuleSimulationBuildInvoiceBuildInvoiceTransactionLines (testTradeModelLine.TestTradeModelLineSale), Check that having properly configured invoice transaction rule it invoice transaction lines are nicely generated and have proper amounts
test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving (testTradeModelLine.TestTradeModelLineSale), Check that after changing invoice line invoice is properly diverged and it is possible to solve
test_TradeModelRuleSimulationBuildInvoiceNewInvoiceLineSupport (testTradeModelLine.TestTradeModelLineSale), Check how is supported addition of invoice line to invoice build from order
test_TradeModelRuleSimulationBuildInvoiceNewTradeCondition (testTradeModelLine.TestTradeModelLineSale), Check that after changing trade condition invoice is diverged
test_TradeModelRuleSimulationBuildInvoiceOrderSpecialise (testTradeModelLine.TestTradeModelLineSale)
test_TradeModelRuleSimulationExpand (testTradeModelLine.TestTradeModelLineSale), Tests tree of simulations from Trade Model Rule
test_TradeModelRuleSimulationExpandOrderSpecialise (testTradeModelLine.TestTradeModelLineSale)
test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuild (testTradeModelLine.TestTradeModelLineSale), Check building invoice after splitting packing list
test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio (testTradeModelLine.TestTradeModelLineSale), Check building invoice after splitting packing list using different ratio
test_TradeModelRuleSimulationReexpand (testTradeModelLine.TestTradeModelLineSale), Tests tree of simulations from Trade Model Rule with reexpanding
test_TradeModelRuleSimulationReexpandOrderSpecialise (testTradeModelLine.TestTradeModelLineSale)
test_TradeModelRuleSimulationReexpandResourceChange (testTradeModelLine.TestTradeModelLineSale), Tests tree of simulations from Trade Model Rule with reexpanding when resource changes on model
test_TradeModelRuleSimulationWithoutBPM (testTradeModelLine.TestTradeModelLineSale), Tests tree of simulations from Trade Model Rule when there is no BPM
test_TradeModelRuleSimulationWithoutTradeCondition (testTradeModelLine.TestTradeModelLineSale), Tests tree of simulations from Trade Model Rule when there is no Trade Condition
test_findEffectiveSpecialiseValueListWithPortalType (testTradeModelLine.TestTradeModelLineSale)
test_getAggregatedAmountList (testTradeModelLine.TestTradeModelLineSale)
test_getAggregatedAmountListOrderSpecialise (testTradeModelLine.TestTradeModelLineSale)
test_getAggregatedAmountListWithComplexModelLinesCreateInEasyOrder (testTradeModelLine.TestTradeModelLineSale)
test_getAggregatedAmountListWithComplexModelLinesCreateInRandomOrder (testTradeModelLine.TestTradeModelLineSale)
test_getAggregatedAmountList_afterUpdateAggregatedAmountList (testTradeModelLine.TestTradeModelLineSale)
test_getComplexTradeModelLineComposedList (testTradeModelLine.TestTradeModelLineSale), Test that list of contribution/application relations is sorted to do easy traversal
test_getTradeModelLineComposedList (testTradeModelLine.TestTradeModelLineSale), Test that list of contribution/application relations is sorted to do easy traversal
test_simpleGetTradeModelLineComposedList (testTradeModelLine.TestTradeModelLineSale)
test_tradeModelLineWithEmptyBaseContributionMovement (testTradeModelLine.TestTradeModelLineSale)
test_tradeModelLineWithFixedPrice (testTradeModelLine.TestTradeModelLineSale)
test_tradeModelLineWithRounding (testTradeModelLine.TestTradeModelLineSale)
test_tradeModelLineWithTargetLevelSetting (testTradeModelLine.TestTradeModelLineSale)
testTradeModelLinePurchase (29 errors)
test_TradeModelRuleSimulationBuildInvoice (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_TradeModelRuleSimulationBuildInvoice (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_TradeModelRuleSimulationBuildInvoiceBuildInvoiceTransactionLines (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check that having properly configured invoice transaction rule it invoice transaction lines are nicely generated and have proper amounts
test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check that after changing invoice line invoice is properly diverged and it is possible to solve
test_TradeModelRuleSimulationBuildInvoiceNewInvoiceLineSupport (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check how is supported addition of invoice line to invoice build from order
test_TradeModelRuleSimulationBuildInvoiceNewTradeCondition (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check that after changing trade condition invoice is diverged
test_TradeModelRuleSimulationBuildInvoiceOrderSpecialise (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_TradeModelRuleSimulationExpand (testTradeModelLinePurchase.TestTradeModelLinePurchase), Tests tree of simulations from Trade Model Rule
test_TradeModelRuleSimulationExpandOrderSpecialise (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuild (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check building invoice after splitting packing list
test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check building invoice after splitting packing list using different ratio
test_TradeModelRuleSimulationReexpand (testTradeModelLinePurchase.TestTradeModelLinePurchase), Tests tree of simulations from Trade Model Rule with reexpanding
test_TradeModelRuleSimulationReexpandOrderSpecialise (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_TradeModelRuleSimulationReexpandResourceChange (testTradeModelLinePurchase.TestTradeModelLinePurchase), Tests tree of simulations from Trade Model Rule with reexpanding when resource changes on model
test_TradeModelRuleSimulationWithoutBPM (testTradeModelLinePurchase.TestTradeModelLinePurchase), Tests tree of simulations from Trade Model Rule when there is no BPM
test_TradeModelRuleSimulationWithoutTradeCondition (testTradeModelLinePurchase.TestTradeModelLinePurchase), Tests tree of simulations from Trade Model Rule when there is no Trade Condition
test_findEffectiveSpecialiseValueListWithPortalType (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_getAggregatedAmountList (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_getAggregatedAmountListOrderSpecialise (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_getAggregatedAmountListWithComplexModelLinesCreateInEasyOrder (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_getAggregatedAmountListWithComplexModelLinesCreateInRandomOrder (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_getAggregatedAmountList_afterUpdateAggregatedAmountList (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_getComplexTradeModelLineComposedList (testTradeModelLinePurchase.TestTradeModelLinePurchase), Test that list of contribution/application relations is sorted to do easy traversal
test_getTradeModelLineComposedList (testTradeModelLinePurchase.TestTradeModelLinePurchase), Test that list of contribution/application relations is sorted to do easy traversal
test_simpleGetTradeModelLineComposedList (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_tradeModelLineWithEmptyBaseContributionMovement (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_tradeModelLineWithFixedPrice (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_tradeModelLineWithRounding (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_tradeModelLineWithTargetLevelSetting (testTradeModelLinePurchase.TestTradeModelLinePurchase)
The following tests were at least partly skipped:
testBase (3 skips)
test_NonIndexable (testBase.TestBase), check if a document is not indexed where we set isIndexable=0 in the same transaction of newContent(). ... skipped 'isIndexable is not designed to work like tested here, this test must be rewritten once we know how to handle correctly templates'
test_NonIndexable2 (testBase.TestBase), check if a document is not indexed where we call edit() and set isIndexable=0 after it is already indexed. ... skipped 'isIndexable is not designed to work like tested here, this test must be rewritten once we know how to handle correctly templates'
test_NonIndexable3 (testBase.TestBase), check if a document is not indexed where we set isIndexable=0 and call edit() after it is already indexed. ... skipped 'isIndexable is not designed to work like tested here, this test must be rewritten once we know how to handle correctly templates'
testBusinessTemplate (2 skips)
testCMFActivity (1 skips)
testERP5Base (1 skips)
testERP5Catalog (3 skips)
test_49_IndexInOrderedSearchFolder (testERP5Catalog.TestERP5Catalog) ... skipped 'TODO ERP5'
test_SubDocumentsWithAcquireLocalRoleSecurityIndexing (testERP5Catalog.TestERP5Catalog) ... skipped 'TODO ERP5'
test_sortOnRelatedKeyWithUnsetRelation (testERP5Catalog.TestERP5Catalog) ... skipped 'TODO ERP5'
testERP5Interfaces (13 skips)
testERP5Simulation (5 skips)
testERP5TypeInterfaces (1 skips)
testFormPrintoutAsODT (1 skips)
test_09_FieldReplacementWithValidation (testFormPrintoutAsODT.TestFormPrintoutAsODT) ... skipped 'Disable validation because OOo does not produce compliant xml, and RelaxNG status is still draft'
testMRP (4 skips)
test_TransformationRule_expand_concurrent (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationRule_expand_reexpand (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationRule_getHeadProductionPathList (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationSourcingRule_expand (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
testProxyField (1 skips)
testSQLCachedWorklist (1 skips)
test_02_related_key (testSQLCachedWorklist.TestSQLCachedWorklist) ... skipped 'TODO ERP5'
testSelectionTool (7 skips)
skipped 'Test to be written'
testPage (testSelectionTool.TestSelectionTool) ... skipped 'Test to be written'
testView (testSelectionTool.TestSelectionTool) ... skipped 'Test to be written'
skipped 'Test to be written'
testDeleteGlobalSelection (testSelectionTool.TestSelectionToolMemcachedStorage) ... skipped 'To be decided if implementation is required'
testPage (testSelectionTool.TestSelectionToolMemcachedStorage) ... skipped 'Test to be written'
testView (testSelectionTool.TestSelectionToolMemcachedStorage) ... skipped 'Test to be written'
testTemplate (1 skips)
testTranslation (1 skips)
Attached traceback has been truncated to the first 5000 lines
-------------- next part --------------
ERROR: test_AccountingPeriodRefusesWrongDateTransactionValidation (testAccounting.TestAccountingWithSequences), Accounting Periods prevents transactions from being validated when there
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 3921, in test_AccountingPeriodRefusesWrongDateTransactionValidation
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 2930, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateCurrencies
CreateEntities
CreateAccounts
CreateAccountingPeriod
OpenAccountingPeriod
Tic
UseInvalidDates
CreateInvoices
> CheckStopInvoicesRefused
Tic
CheckInvoicesAreDraft
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 3336, in stepCheckStopInvoicesRefused
invoice, 'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_AccountingTransactionValidationAccounts (testAccounting.TestAccountingWithSequences), Transaction validation and accounts
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 4022, in test_AccountingTransactionValidationAccounts
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 2930, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrencies
CreateAccounts
CreateValidAccountingTransaction
> ValidateClosedAccount
CreateValidAccountingTransaction
ValidateNoAccounts
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 3703, in stepValidateClosedAccount
'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_AccountingTransactionValidationBalanced (testAccounting.TestAccountingWithSequences), Transaction validation and balance
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 4035, in test_AccountingTransactionValidationBalanced
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 2930, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrencies
CreateAccounts
CreateValidAccountingTransaction
> ValidateNotBalanced
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 3771, in stepValidateNotBalanced
'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_AccountingTransactionValidationCurrency (testAccounting.TestAccountingWithSequences), Transaction validation and currency
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 4011, in test_AccountingTransactionValidationCurrency
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 2930, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrencies
CreateAccounts
CreateValidAccountingTransaction
> ValidateNoCurrency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 3681, in stepValidateNoCurrency
'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_AccountingTransactionValidationDate (testAccounting.TestAccountingWithSequences), Transaction validation and dates
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 3988, in test_AccountingTransactionValidationDate
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 2930, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrencies
CreateAccounts
CreateValidAccountingTransaction
> ValidateNoDate
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 3609, in stepValidateNoDate
'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_AccountingTransactionValidationPayment (testAccounting.TestAccountingWithSequences), Transaction validation and payment
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 4046, in test_AccountingTransactionValidationPayment
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 2930, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrencies
CreateAccounts
CreateValidAccountingTransaction
> ValidateNoPayment
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 3835, in stepValidateNoPayment
'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_AccountingTransactionValidationRemoveEmptyLines (testAccounting.TestAccountingWithSequences), Transaction validation removes empty lines
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 4058, in test_AccountingTransactionValidationRemoveEmptyLines
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 2930, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrencies
CreateAccounts
CreateValidAccountingTransaction
> ValidateRemoveEmptyLines
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 3883, in stepValidateRemoveEmptyLines
self.getWorkflowTool().doActionFor(accounting_transaction, 'stop_action')
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_AccountingTransactionValidationSection (testAccounting.TestAccountingWithSequences), Transaction validation and section
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 4000, in test_AccountingTransactionValidationSection
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 2930, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrencies
CreateAccounts
CreateValidAccountingTransaction
> ValidateNoSection
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 3633, in stepValidateNoSection
'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_createAccountingTransaction (testAccounting.TestAccountingWithSequences), Make sure acounting transactions created by createAccountingTransaction
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 3568, in test_createAccountingTransaction
self.workflow_tool.doActionFor(accounting_transaction, 'stop_action')
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_Invoice_createRelatedPaymentTransactionDifferentSection (testAccounting.TestTransactions)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 2344, in test_Invoice_createRelatedPaymentTransactionDifferentSection
self._checkRelatedSalePayment(invoice, payment, payment_node, 60)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 2285, in _checkRelatedSalePayment
self.portal.portal_workflow.doActionFor(payment, 'stop_action')
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_Invoice_createRelatedPaymentTransactionGroupedLines (testAccounting.TestTransactions)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 2323, in test_Invoice_createRelatedPaymentTransactionGroupedLines
self._checkRelatedSalePayment(invoice, payment, payment_node, 60)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 2285, in _checkRelatedSalePayment
self.portal.portal_workflow.doActionFor(payment, 'stop_action')
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_Invoice_createRelatedPaymentTransactionRelatedInvoice (testAccounting.TestTransactions)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 2366, in test_Invoice_createRelatedPaymentTransactionRelatedInvoice
'stop_action')
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_Invoice_createRelatedPaymentTransactionRelatedInvoiceDifferentSide (testAccounting.TestTransactions)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 2397, in test_Invoice_createRelatedPaymentTransactionRelatedInvoiceDifferentSide
'stop_action')
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_Invoice_createRelatedPaymentTransactionRelatedInvoiceDraft (testAccounting.TestTransactions)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 2444, in test_Invoice_createRelatedPaymentTransactionRelatedInvoiceDraft
self._checkRelatedSalePayment(invoice, payment, payment_node, 100)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 2285, in _checkRelatedSalePayment
self.portal.portal_workflow.doActionFor(payment, 'stop_action')
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_Invoice_createRelatedPaymentTransactionSimple (testAccounting.TestTransactions)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 2302, in test_Invoice_createRelatedPaymentTransactionSimple
self._checkRelatedSalePayment(invoice, payment, payment_node, 100)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 2285, in _checkRelatedSalePayment
self.portal.portal_workflow.doActionFor(payment, 'stop_action')
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_SourceDestinationReference (testAccounting.TestTransactions)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 2118, in test_SourceDestinationReference
self.portal.portal_workflow.doActionFor(
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_SourceDestinationReferenceGroupAccounting (testAccounting.TestTransactions)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 2169, in test_SourceDestinationReferenceGroupAccounting
self.portal.portal_workflow.doActionFor(
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_AccountingTransactionValidationAfterPeriod (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 461, in test_AccountingTransactionValidationAfterPeriod
accounting_transaction, 'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_AccountingTransactionValidationBeforePeriod (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 445, in test_AccountingTransactionValidationBeforePeriod
accounting_transaction, 'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_AccountingTransactionValidationRecursivePeriod (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 493, in test_AccountingTransactionValidationRecursivePeriod
accounting_transaction, 'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_AccountingTransactionValidationRefusedWithCategoriesAsSections (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 706, in test_AccountingTransactionValidationRefusedWithCategoriesAsSections
accounting_transaction, 'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_AccountingTransactionValidationStartDate (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 427, in test_AccountingTransactionValidationStartDate
accounting_transaction, 'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_AccountingWorkflow (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 743, in test_AccountingWorkflow
doActionFor(accounting_transaction, 'start_action')
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "start_action" action.
ERROR: test_CancellationAmount (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 860, in test_CancellationAmount
'stop_action')
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_DestinationPaymentTransactionValidationDate (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 382, in test_DestinationPaymentTransactionValidationDate
accounting_transaction, 'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_NonBalancedAccountingTransaction (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 564, in test_NonBalancedAccountingTransaction
accounting_transaction, 'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_NonBalancedAccountingTransactionDifferentSectionOnLines (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 660, in test_NonBalancedAccountingTransactionDifferentSectionOnLines
accounting_transaction, 'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_NonBalancedAccountingTransactionSectionOnLines (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 635, in test_NonBalancedAccountingTransactionSectionOnLines
accounting_transaction, 'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_NonBalancedAccountingTransactionSectionPersonOnLines (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 686, in test_NonBalancedAccountingTransactionSectionPersonOnLines
self.portal.portal_workflow.doActionFor(accounting_transaction, 'stop_action')
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_NonBalancedDestinationAccountingTransaction (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 589, in test_NonBalancedDestinationAccountingTransaction
accounting_transaction, 'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_NonBalancedDestinationAccountingTransactionNoAccount (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 613, in test_NonBalancedDestinationAccountingTransactionNoAccount
accounting_transaction, 'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_PaymentTransactionValidationCheckBankAccountPriceCurrency (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 543, in test_PaymentTransactionValidationCheckBankAccountPriceCurrency
accounting_transaction, 'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_PaymentTransactionValidationDate (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 362, in test_PaymentTransactionValidationDate
accounting_transaction, 'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_PaymentTransactionWithEmployee (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 516, in test_PaymentTransactionWithEmployee
accounting_transaction, 'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_PurchaseInvoiceTransactionValidationDate (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 343, in test_PurchaseInvoiceTransactionValidationDate
accounting_transaction, 'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_SaleInvoiceTransactionValidationDate (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 325, in test_SaleInvoiceTransactionValidationDate
accounting_transaction, 'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_UneededDestinationAssetPrice (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 828, in test_UneededDestinationAssetPrice
'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_UneededSourceAssetPrice (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 789, in test_UneededSourceAssetPrice
'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_UnusedSectionTransactionValidationDate (testAccounting.TestTransactionValidation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 406, in test_UnusedSectionTransactionValidationDate
accounting_transaction, 'stop_action')
File "/usr/lib64/python2.4/unittest.py", line 320, in failUnlessRaises
callableObj(*args, **kwargs)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "stop_action" action.
ERROR: test_04_SimpleInvoice (testAccountingRules.TestSaleAccountingRules), Simple Invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1733, in test_04_SimpleInvoice
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
PlanInvoice
Tic
CheckFirstRuleIsApplied
CheckPaymentRuleIsApplied
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
> StartInvoice
Tic
CheckAccountingLinesCoherantWithSimulation
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1298, in stepStartInvoice
skip_period_validation = 1
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 301, in doActionFor
return self._invokeWithNotification(
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 616, in _invokeWithNotification
res = func(*args, **kw)
File "/usr/lib/erp5/lib/python/Products/DCWorkflow/DCWorkflow.py", line 286, in doActionFor
raise Unauthorized(action)
Unauthorized: You are not allowed to access 'start_action' in this context
ERROR: test_04b_SimpleInvoiceConfirm (testAccountingRules.TestSaleAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1772, in test_04b_SimpleInvoiceConfirm
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
> StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1298, in stepStartInvoice
skip_period_validation = 1
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 301, in doActionFor
return self._invokeWithNotification(
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 616, in _invokeWithNotification
res = func(*args, **kw)
File "/usr/lib/erp5/lib/python/Products/DCWorkflow/DCWorkflow.py", line 286, in doActionFor
raise Unauthorized(action)
Unauthorized: You are not allowed to access 'start_action' in this context
ERROR: test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 lines.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1809, in test_04c_SimpleInvoiceTwoLines
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoiceTwoLines
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
> StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1298, in stepStartInvoice
skip_period_validation = 1
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 301, in doActionFor
return self._invokeWithNotification(
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 616, in _invokeWithNotification
res = func(*args, **kw)
File "/usr/lib/erp5/lib/python/Products/DCWorkflow/DCWorkflow.py", line 286, in doActionFor
raise Unauthorized(action)
Unauthorized: You are not allowed to access 'start_action' in this context
ERROR: test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestSaleAccountingRules), Add a new line then updateAppliedRule.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1886, in test_05a_SimpleInvoiceReExpandAddLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateEmptyInvoice
PlanInvoice
Tic
AddInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
> StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1298, in stepStartInvoice
skip_period_validation = 1
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 301, in doActionFor
return self._invokeWithNotification(
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 616, in _invokeWithNotification
res = func(*args, **kw)
File "/usr/lib/erp5/lib/python/Products/DCWorkflow/DCWorkflow.py", line 286, in doActionFor
raise Unauthorized(action)
Unauthorized: You are not allowed to access 'start_action' in this context
ERROR: test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestSaleAccountingRules), Tests that editing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1924, in test_05b_SimpleInvoiceReExpandEditLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateOtherSimpleInvoice
PlanInvoice
Tic
EditInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
> StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1298, in stepStartInvoice
skip_period_validation = 1
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 301, in doActionFor
return self._invokeWithNotification(
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 616, in _invokeWithNotification
res = func(*args, **kw)
File "/usr/lib/erp5/lib/python/Products/DCWorkflow/DCWorkflow.py", line 286, in doActionFor
raise Unauthorized(action)
Unauthorized: You are not allowed to access 'start_action' in this context
ERROR: test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestSaleAccountingRules), Tests that removing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1962, in test_05c_SimpleInvoiceReExpandDeleteLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
AddInvoiceLine
PlanInvoice
Tic
DeleteInvoiceLine
Tic
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
> StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1298, in stepStartInvoice
skip_period_validation = 1
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 301, in doActionFor
return self._invokeWithNotification(
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 616, in _invokeWithNotification
res = func(*args, **kw)
File "/usr/lib/erp5/lib/python/Products/DCWorkflow/DCWorkflow.py", line 286, in doActionFor
raise Unauthorized(action)
Unauthorized: You are not allowed to access 'start_action' in this context
ERROR: test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestSaleAccountingRules), Tests that updating an applied rule many times doesn't break the
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2071, in test_05e_SimpleInvoiceExpandManyTimes
""", quiet=quiet )
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
PlanInvoice
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
> StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1298, in stepStartInvoice
skip_period_validation = 1
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 301, in doActionFor
return self._invokeWithNotification(
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 616, in _invokeWithNotification
res = func(*args, **kw)
File "/usr/lib/erp5/lib/python/Products/DCWorkflow/DCWorkflow.py", line 286, in doActionFor
raise Unauthorized(action)
Unauthorized: You are not allowed to access 'start_action' in this context
ERROR: test_06_MultiLineInvoice (testAccountingRules.TestSaleAccountingRules), Multiple lines invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2085, in test_06_MultiLineInvoice
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
Tic
CreateNotebookFranceCell
CreateBareboneFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateMultiLineInvoice
PlanInvoice
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
> StartInvoice
Tic
CheckAccountingLinesCreatedForMultiLineInvoice
CheckPaymentLinesCreatedForMultiLineInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1298, in stepStartInvoice
skip_period_validation = 1
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 301, in doActionFor
return self._invokeWithNotification(
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 616, in _invokeWithNotification
res = func(*args, **kw)
File "/usr/lib/erp5/lib/python/Products/DCWorkflow/DCWorkflow.py", line 286, in doActionFor
raise Unauthorized(action)
Unauthorized: You are not allowed to access 'start_action' in this context
ERROR: test_04_SimpleInvoice (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1733, in test_04_SimpleInvoice
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
PlanInvoice
Tic
CheckFirstRuleIsApplied
CheckPaymentRuleIsApplied
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
> StartInvoice
Tic
CheckAccountingLinesCoherantWithSimulation
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1298, in stepStartInvoice
skip_period_validation = 1
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 301, in doActionFor
return self._invokeWithNotification(
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 616, in _invokeWithNotification
res = func(*args, **kw)
File "/usr/lib/erp5/lib/python/Products/DCWorkflow/DCWorkflow.py", line 286, in doActionFor
raise Unauthorized(action)
Unauthorized: You are not allowed to access 'start_action' in this context
ERROR: test_04b_SimpleInvoiceConfirm (testAccountingRules.TestPurchaseAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1772, in test_04b_SimpleInvoiceConfirm
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
> StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1298, in stepStartInvoice
skip_period_validation = 1
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 301, in doActionFor
return self._invokeWithNotification(
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 616, in _invokeWithNotification
res = func(*args, **kw)
File "/usr/lib/erp5/lib/python/Products/DCWorkflow/DCWorkflow.py", line 286, in doActionFor
raise Unauthorized(action)
Unauthorized: You are not allowed to access 'start_action' in this context
ERROR: test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 lines.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1809, in test_04c_SimpleInvoiceTwoLines
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoiceTwoLines
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
> StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1298, in stepStartInvoice
skip_period_validation = 1
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 301, in doActionFor
return self._invokeWithNotification(
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 616, in _invokeWithNotification
res = func(*args, **kw)
File "/usr/lib/erp5/lib/python/Products/DCWorkflow/DCWorkflow.py", line 286, in doActionFor
raise Unauthorized(action)
Unauthorized: You are not allowed to access 'start_action' in this context
ERROR: test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestPurchaseAccountingRules), Add a new line then updateAppliedRule.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1886, in test_05a_SimpleInvoiceReExpandAddLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateEmptyInvoice
PlanInvoice
Tic
AddInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
> StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1298, in stepStartInvoice
skip_period_validation = 1
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 301, in doActionFor
return self._invokeWithNotification(
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 616, in _invokeWithNotification
res = func(*args, **kw)
File "/usr/lib/erp5/lib/python/Products/DCWorkflow/DCWorkflow.py", line 286, in doActionFor
raise Unauthorized(action)
Unauthorized: You are not allowed to access 'start_action' in this context
ERROR: test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestPurchaseAccountingRules), Tests that editing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1924, in test_05b_SimpleInvoiceReExpandEditLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateOtherSimpleInvoice
PlanInvoice
Tic
EditInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
> StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1298, in stepStartInvoice
skip_period_validation = 1
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 301, in doActionFor
return self._invokeWithNotification(
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 616, in _invokeWithNotification
res = func(*args, **kw)
File "/usr/lib/erp5/lib/python/Products/DCWorkflow/DCWorkflow.py", line 286, in doActionFor
raise Unauthorized(action)
Unauthorized: You are not allowed to access 'start_action' in this context
ERROR: test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestPurchaseAccountingRules), Tests that removing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1962, in test_05c_SimpleInvoiceReExpandDeleteLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
AddInvoiceLine
PlanInvoice
Tic
DeleteInvoiceLine
Tic
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
> StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1298, in stepStartInvoice
skip_period_validation = 1
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 301, in doActionFor
return self._invokeWithNotification(
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 616, in _invokeWithNotification
res = func(*args, **kw)
File "/usr/lib/erp5/lib/python/Products/DCWorkflow/DCWorkflow.py", line 286, in doActionFor
raise Unauthorized(action)
Unauthorized: You are not allowed to access 'start_action' in this context
ERROR: test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestPurchaseAccountingRules), Tests that updating an applied rule many times doesn't break the
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2071, in test_05e_SimpleInvoiceExpandManyTimes
""", quiet=quiet )
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
PlanInvoice
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
> StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1298, in stepStartInvoice
skip_period_validation = 1
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 301, in doActionFor
return self._invokeWithNotification(
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 616, in _invokeWithNotification
res = func(*args, **kw)
File "/usr/lib/erp5/lib/python/Products/DCWorkflow/DCWorkflow.py", line 286, in doActionFor
raise Unauthorized(action)
Unauthorized: You are not allowed to access 'start_action' in this context
ERROR: test_06_MultiLineInvoice (testAccountingRules.TestPurchaseAccountingRules), Multiple lines invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2085, in test_06_MultiLineInvoice
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
Tic
CreateNotebookFranceCell
CreateBareboneFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateMultiLineInvoice
PlanInvoice
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
> StartInvoice
Tic
CheckAccountingLinesCreatedForMultiLineInvoice
CheckPaymentLinesCreatedForMultiLineInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1298, in stepStartInvoice
skip_period_validation = 1
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 301, in doActionFor
return self._invokeWithNotification(
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 616, in _invokeWithNotification
res = func(*args, **kw)
File "/usr/lib/erp5/lib/python/Products/DCWorkflow/DCWorkflow.py", line 286, in doActionFor
raise Unauthorized(action)
Unauthorized: You are not allowed to access 'start_action' in this context
ERROR: test_02_InvoiceDeletePackingListLine (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 517, in test_02_InvoiceDeletePackingListLine
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
Tic
SetContainerFullQuantity
Tic
CheckPackingListIsPacked
DeletePackingListLine
> SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_03_InvoiceDecreaseQuantity (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 557, in test_03_InvoiceDecreaseQuantity
self.playSequence(sequence, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
DecreaseInvoiceLineQuantity
CheckInvoiceIsDivergent
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
SplitAndDeferInvoice
Tic
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
CheckInvoiceSplitted
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckInvoiceTransactionRule
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_04_InvoiceChangeStartDateFail (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 592, in test_04_InvoiceChangeStartDateFail
self.playSequence(sequence, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
ChangeInvoiceStartDate
CheckInvoiceIsDivergent
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
UnifyStartDateWithDecisionInvoice
Tic
CheckInvoiceNotSplitted
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
CheckPackingListIsDivergent
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_07_SplitAndDeferInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 814, in test_07_SplitAndDeferInvoice
self.playSequence(sequence, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
StopPackingList
Tic
DeliverPackingList
Tic
CheckPackingListIsSolved
CheckPackingListNotSplitted
DecreaseInvoiceLineQuantity
CheckInvoiceIsDivergent
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
SplitAndDeferInvoice
Tic
StartInvoice
Tic
StopInvoice
Tic
DeliverInvoice
Tic
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
CheckInvoiceSplitted
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckInvoiceTransactionRule
SwitchInvoices
StartInvoice
Tic
StopInvoice
Tic
DeliverInvoice
Tic
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_08_AcceptDecisionOnInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 882, in test_08_AcceptDecisionOnInvoice
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
StopPackingList
Tic
DeliverPackingList
Tic
CheckPackingListIsSolved
CheckPackingListNotSplitted
DecreaseInvoiceLineQuantity
CheckInvoiceIsDivergent
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
AcceptDecisionQuantityInvoice
Tic
StartInvoice
Tic
StopInvoice
Tic
DeliverInvoice
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckInvoiceTransactionRule
CheckInvoiceNotSplitted
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_10_ManuallyAddedMovements (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 936, in test_10_ManuallyAddedMovements
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
StartInvoice
Tic
AddInvoiceTransactionLines
Tic
CheckSimulationTrees
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_11_ManuallyAddedMovementsManyTransactions (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 970, in test_11_ManuallyAddedMovementsManyTransactions
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
Tic
CheckInvoiceIsSolved
StartInvoice
Tic
AddInvoiceLinesManyTransactions
Tic
CheckSimulationTrees
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_12_compareInvoiceAndPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 992, in test_12_compareInvoiceAndPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
CheckInvoicesConsistency
CheckPackingListInvoice
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_13_acceptQuantityDivergenceOnInvoiceWithStartedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 1021, in test_13_acceptQuantityDivergenceOnInvoiceWithStartedPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
StartPackingList
Tic
ChangeQuantityDoubledOnInvoice
Tic
CheckDivergedQuantityOnInvoice
AcceptDecisionOnInvoice
Tic
CheckDivergenceOnInvoice
CheckDivergedOnPackingList
CheckDivergedQuantityOnPackingList
AdoptPrevisionOnPackingList
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_AcceptQuantityDivergenceOnInvoiceWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice), Accept divergence with stopped packing list
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 298, in test_AcceptQuantityDivergenceOnInvoiceWithStoppedPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
Tic
> SetReadyPackingList
Tic
StartPackingList
StopPackingList
Tic
ChangeQuantityDoubledOnInvoice
Tic
CheckDivergedQuantityOnInvoice
AcceptDecisionOnInvoice
Tic
CheckDivergenceOnInvoice
CheckSolvedOnPackingList
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_AcceptQuantityDivergenceOnInvoiceWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), Accept divergence with stopped packing list
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 298, in test_AcceptQuantityDivergenceOnInvoiceWithStoppedPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
Tic
Tic
> SetReadyPackingList
Tic
StartPackingList
StopPackingList
Tic
ChangeQuantityDoubledOnInvoice
Tic
CheckDivergedQuantityOnInvoice
AcceptDecisionOnInvoice
Tic
CheckDivergenceOnInvoice
CheckSolvedOnPackingList
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
FAIL: test_01_TwoInvoicesFromTwoPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 491, in test_01_TwoInvoicesFromTwoPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
DecreasePackingListLineQuantity
CheckPackingListIsCalculating
Tic
> CheckPackingListIsDiverged
SplitAndDeferPackingList
Tic
CheckPackingListIsSolved
CheckPackingListSplitted
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
DefineNewPackingListContainer
Tic
CheckNewPackingListIsPacked
SetReadyPackingList
SetReadyNewPackingList
Tic
StartPackingList
StartNewPackingList
Tic
CheckTwoInvoices
RemoveDateMovementGroupForAdvancedTransactionBuilder
StartTwoInvoices
Tic
CheckInvoicesAndTransactionsConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 218, in stepCheckPackingListIsDiverged
self.assertEquals('diverged', packing_list.getCausalityState())
AssertionError: 'diverged' != 'solved'
FAIL: test_05_AcceptDecisionOnPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 658, in test_05_AcceptDecisionOnPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
CheckInvoicingRule
DecreasePackingListLineQuantity
SetContainerFullQuantity
CheckPackingListIsCalculating
Tic
> CheckPackingListIsDiverged
AcceptDecisionQuantity
Tic
CheckPackingListIsSolved
CheckPackingListNotSplitted
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
StopPackingList
Tic
DeliverPackingList
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckInvoiceTransactionRule
StartInvoice
Tic
StopInvoice
Tic
DeliverInvoice
Tic
CheckInvoiceNotSplitted
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 218, in stepCheckPackingListIsDiverged
self.assertEquals('diverged', packing_list.getCausalityState())
AssertionError: 'diverged' != 'solved'
FAIL: test_06_AcceptDecisionOnPackingListAndInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 744, in test_06_AcceptDecisionOnPackingListAndInvoice
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
CheckInvoicingRule
DecreasePackingListLineQuantity
SetContainerFullQuantity
CheckPackingListIsCalculating
Tic
> CheckPackingListIsDiverged
AcceptDecisionQuantity
Tic
CheckPackingListIsSolved
CheckPackingListNotSplitted
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
StopPackingList
Tic
DeliverPackingList
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckInvoiceTransactionRule
IncreaseInvoiceLineQuantity
Tic
CheckInvoiceIsDiverged
AcceptDecisionQuantityInvoice
Tic
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
StartInvoice
Tic
StopInvoice
Tic
DeliverInvoice
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckInvoiceTransactionRule
CheckInvoiceNotSplitted
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 218, in stepCheckPackingListIsDiverged
self.assertEquals('diverged', packing_list.getCausalityState())
AssertionError: 'diverged' != 'solved'
FAIL: test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice), Adopt quantity with stopped packing list
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 320, in test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
StartPackingList
StopPackingList
Tic
ChangeQuantityDoubledOnInvoice
Tic
> CheckDivergedQuantityOnInvoice
AdoptPrevisionOnInvoice
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 225, in stepCheckDivergedQuantityOnInvoice
self.assertTrue(invoice.isDivergent())
AssertionError
FAIL: test_CreatingAccountingTransactionThroughInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice), test creating simple invoice and accounting transaction
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 266, in test_CreatingAccountingTransactionThroughInvoice
self.assertEquals('solved', packing_list.getCausalityState())
AssertionError: 'solved' != 'diverged'
FAIL: test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), Adopt quantity with stopped packing list
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 320, in test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
Tic
StartPackingList
StopPackingList
Tic
ChangeQuantityDoubledOnInvoice
Tic
> CheckDivergedQuantityOnInvoice
AdoptPrevisionOnInvoice
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 225, in stepCheckDivergedQuantityOnInvoice
self.assertTrue(invoice.isDivergent())
AssertionError
FAIL: test_CreatingAccountingTransactionThroughInvoice (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), test creating simple invoice and accounting transaction
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 266, in test_CreatingAccountingTransactionThroughInvoice
self.assertEquals('solved', packing_list.getCausalityState())
AssertionError: 'solved' != 'diverged'
FAIL: test_01_diverged_purchase_packing_list_source_total_asset_price (testConversionInSimulation.TestConversionInSimulation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testConversionInSimulation.py", line 680, in test_01_diverged_purchase_packing_list_source_total_asset_price
'diverged')
AssertionError: 'solved' != 'diverged'
FAIL: test_01_diverged_sale_packing_list_destination_total_asset_price (testConversionInSimulation.TestConversionInSimulation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testConversionInSimulation.py", line 578, in test_01_diverged_sale_packing_list_destination_total_asset_price
'diverged')
AssertionError: 'solved' != 'diverged'
ERROR: test_01_IfNested (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testDeliveryBuilderToSupportMultipleLines.py", line 227, in test_01_IfNested
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
UpdateBuilderForMultipleLineList
SetPythonScriptForDeliveryBuilder
StartPackingList
CheckInvoicingRule
Tic
GetRelatedInvoiceFromPackingList
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_02_AdoptingPrevision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testDeliveryBuilderToSupportMultipleLines.py", line 267, in test_02_AdoptingPrevision
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
UpdateBuilderForMultipleLineList
SetPythonScriptForDeliveryBuilder
StartPackingList
CheckInvoicingRule
Tic
GetRelatedInvoiceFromPackingList
UpdatePackingList
Tic
AcceptDecisionPackingListQuantity
Tic
CheckInvoiceIsDivergent
CheckInvoiceIsDiverged
AdoptPrevisionInvoiceQuantity
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_03_AcceptingDecision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testDeliveryBuilderToSupportMultipleLines.py", line 304, in test_03_AcceptingDecision
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
UpdateBuilderForMultipleLineList
SetPythonScriptForDeliveryBuilder
StartPackingList
CheckInvoicingRule
Tic
GetRelatedInvoiceFromPackingList
UpdateInvoice
Tic
CheckInvoiceIsDivergent
AcceptDecisionInvoiceQuantity
Tic
CheckInvoiceIsNotDivergent
CheckPackingListIsDivergent
AdoptPrevisionPackingListQuantity
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_04_MergingMultipleSaleOrders (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testDeliveryBuilderToSupportMultipleLines.py", line 361, in test_04_MergingMultipleSaleOrders
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
UpdateBuilderForMultipleLineList
SetPythonScriptForDeliveryBuilder
StartPackingList
CheckInvoicingRule
Tic
GetRelatedInvoiceFromPackingList
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
Tic
CreateOrderLine
SetOrderLineResource
UpdateOrder
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetFillContainerLine
Tic
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceIsDivergent
AdoptPrevisionInvoiceQuantity
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
FAIL: test_01_QuantityDivergenceTester (testDivergenceTester.TestDivergenceTester)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testDivergenceTester.py", line 165, in test_01_QuantityDivergenceTester
sequence_list.play(self, quiet=self.quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
GetPackingList
> CheckPackingListIsNotDivergent
SetNewQuantity
CheckPackingListIsNotDivergent
AddQuantityDivergenceTester
CheckPackingListIsDivergent
SetPreviousQuantity
CheckPackingListIsNotDivergent
Tic
RemoveDivergenceTesters
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testPackingList.py", line 225, in stepCheckPackingListIsNotDivergent
self.assertFalse(packing_list.isDivergent())
AssertionError
FAIL: test_02_CategoryDivergenceTester (testDivergenceTester.TestDivergenceTester)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testDivergenceTester.py", line 224, in test_02_CategoryDivergenceTester
sequence_list.play(self, quiet=self.quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
GetPackingList
> CheckPackingListIsNotDivergent
SetNewSource
CheckPackingListIsNotDivergent
AddCategoryDivergenceTester
CheckPackingListIsNotDivergent
ConfigureCategoryDivergenceTesterForSource
CheckPackingListIsDivergent
SetPreviousSource
CheckPackingListIsNotDivergent
Tic
RemoveDivergenceTesters
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testPackingList.py", line 225, in stepCheckPackingListIsNotDivergent
self.assertFalse(packing_list.isDivergent())
AssertionError
FAIL: test_03_PropertyDivergenceTester (testDivergenceTester.TestDivergenceTester)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testDivergenceTester.py", line 283, in test_03_PropertyDivergenceTester
sequence_list.play(self, quiet=self.quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
GetPackingList
> CheckPackingListIsNotDivergent
SetNewStartDate
CheckPackingListIsNotDivergent
AddPropertyDivergenceTester
CheckPackingListIsNotDivergent
ConfigurePropertyDivergenceTesterForStartDate
CheckPackingListIsDivergent
SetPreviousStartDate
CheckPackingListIsNotDivergent
Tic
RemoveDivergenceTesters
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testPackingList.py", line 225, in stepCheckPackingListIsNotDivergent
self.assertFalse(packing_list.isDivergent())
AssertionError
FAIL: test_04_CategoryDivergenceTester (testDivergenceTester.TestDivergenceTester)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testDivergenceTester.py", line 334, in test_04_CategoryDivergenceTester
sequence_list.play(self, quiet=self.quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
GetPackingList
> CheckPackingListIsNotDivergent
SetNewAggregate
CheckPackingListIsNotDivergent
AddCategoryDivergenceTester
CheckPackingListIsNotDivergent
ConfigureCategoryDivergenceTesterForAggregate
CheckPackingListIsDivergent
SetPreviousAggregate
CheckPackingListIsNotDivergent
Tic
RemoveDivergenceTesters
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testPackingList.py", line 225, in stepCheckPackingListIsNotDivergent
self.assertFalse(packing_list.isDivergent())
AssertionError
ERROR: test_Image_conversion_to_base_format_no_original_format_access (testDms.TestDocument), Checks Document.Image
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1786, in test_Image_conversion_to_base_format_no_original_format_access
'TEST-en-002.png'
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1759, in _test_document_conversion_to_base_format_no_original_format_access
dummy = document.convert(format='text')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/mixin/document.py", line 62, in convert
return self._convert(format, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/Image.py", line 335, in _convert
mime_type, data = self._convertToText(format)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/Image.py", line 313, in _convertToText
content = self.getData()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/File.py", line 179, in getData
self._checkConversionFormatPermission(None)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/mixin/document.py", line 98, in _checkConversionFormatPermission
raise Unauthorized('Document: user does not have enough permission'\
Unauthorized: Document: user does not have enough permission to access document in original format
ERROR: test_Text_conversion_to_base_format_no_original_format_access (testDms.TestDocument), Checks Document.OOoDocument
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1779, in test_Text_conversion_to_base_format_no_original_format_access
'TEST-en-002.odt'
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1759, in _test_document_conversion_to_base_format_no_original_format_access
dummy = document.convert(format='text')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/Document/OOoDocument.py", line 376, in convert
mime, data = self._convert(format)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/Document/OOoDocument.py", line 285, in _convert
enc(str(self.getBaseData())),
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/mixin/base_convertable.py", line 83, in getBaseData
self._checkConversionFormatPermission(None)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/mixin/document.py", line 98, in _checkConversionFormatPermission
raise Unauthorized('Document: user does not have enough permission'\
Unauthorized: Document: user does not have enough permission to access document in original format
ERROR: test_WebPage_conversion_to_base_format_no_original_format_access (testDms.TestDocument), Checks Document.TextDocument
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1765, in test_WebPage_conversion_to_base_format_no_original_format_access
'TEST-text-iso8859-1.txt'
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1759, in _test_document_conversion_to_base_format_no_original_format_access
dummy = document.convert(format='text')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/mixin/document.py", line 62, in convert
return self._convert(format, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/TextDocument.py", line 151, in _convert
text_content = self.getTextContent()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/TextDocument.py", line 365, in getTextContent
self._checkConversionFormatPermission(None)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/mixin/document.py", line 98, in _checkConversionFormatPermission
raise Unauthorized('Document: user does not have enough permission'\
Unauthorized: Document: user does not have enough permission to access document in original format
ERROR: test_Image_conversion_to_base_format_no_original_format_access (testDmsWithFlare.TestDocumentWithFlare), Checks Document.Image
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1786, in test_Image_conversion_to_base_format_no_original_format_access
'TEST-en-002.png'
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1759, in _test_document_conversion_to_base_format_no_original_format_access
dummy = document.convert(format='text')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/mixin/document.py", line 62, in convert
return self._convert(format, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/Image.py", line 335, in _convert
mime_type, data = self._convertToText(format)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/Image.py", line 313, in _convertToText
content = self.getData()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/File.py", line 179, in getData
self._checkConversionFormatPermission(None)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/mixin/document.py", line 98, in _checkConversionFormatPermission
raise Unauthorized('Document: user does not have enough permission'\
Unauthorized: Document: user does not have enough permission to access document in original format
ERROR: test_Text_conversion_to_base_format_no_original_format_access (testDmsWithFlare.TestDocumentWithFlare), Checks Document.OOoDocument
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1779, in test_Text_conversion_to_base_format_no_original_format_access
'TEST-en-002.odt'
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1759, in _test_document_conversion_to_base_format_no_original_format_access
dummy = document.convert(format='text')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/Document/OOoDocument.py", line 376, in convert
mime, data = self._convert(format)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/Document/OOoDocument.py", line 285, in _convert
enc(str(self.getBaseData())),
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/mixin/base_convertable.py", line 83, in getBaseData
self._checkConversionFormatPermission(None)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/mixin/document.py", line 98, in _checkConversionFormatPermission
raise Unauthorized('Document: user does not have enough permission'\
Unauthorized: Document: user does not have enough permission to access document in original format
ERROR: test_WebPage_conversion_to_base_format_no_original_format_access (testDmsWithFlare.TestDocumentWithFlare), Checks Document.TextDocument
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1765, in test_WebPage_conversion_to_base_format_no_original_format_access
'TEST-text-iso8859-1.txt'
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1759, in _test_document_conversion_to_base_format_no_original_format_access
dummy = document.convert(format='text')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/mixin/document.py", line 62, in convert
return self._convert(format, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/TextDocument.py", line 151, in _convert
text_content = self.getTextContent()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/TextDocument.py", line 365, in getTextContent
self._checkConversionFormatPermission(None)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/mixin/document.py", line 98, in _checkConversionFormatPermission
raise Unauthorized('Document: user does not have enough permission'\
Unauthorized: Document: user does not have enough permission to access document in original format
FAIL: test_CreateCELWithNoBasePrice (testERP5CurrencyExchangeLine.TestCurrencyExchangeLine)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testERP5CurrencyExchangeLine.py", line 508, in test_CreateCELWithNoBasePrice
327979)
AssertionError: 500.0 != 327979
ERROR: test_01_SimpleInvoice (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2599, in test_01_SimpleInvoice
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
CheckInvoiceLineHasReferenceAndIntIndex
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_03_InvoiceEditAndInvoiceRule (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2662, in test_03_InvoiceEditAndInvoiceRule
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
EditInvoice
CheckInvoiceRuleNotAppliedOnInvoiceEdit
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_06_InvoiceDeletePackingListLine (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2728, in test_06_InvoiceDeletePackingListLine
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
Tic
SetContainerFullQuantity
Tic
CheckPackingListIsPacked
DeletePackingListLine
> SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_07_InvoiceAddPackingListLine (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2755, in test_07_InvoiceAddPackingListLine
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
AddPackingListLine
SetContainerFullQuantity
Tic
> SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_08_InvoiceDecreaseQuantity (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2794, in test_08_InvoiceDecreaseQuantity
self.playSequence(sequence, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
DecreaseInvoiceLineQuantity
CheckInvoiceIsDivergent
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
SplitAndDeferInvoice
Tic
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
CheckInvoiceSplitted
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckInvoiceTransactionRule
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_09_InvoiceChangeStartDateFail (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2828, in test_09_InvoiceChangeStartDateFail
self.playSequence(sequence, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
ChangeInvoiceStartDate
CheckInvoiceIsDivergent
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
UnifyStartDateWithDecisionInvoice
Tic
CheckInvoiceNotSplitted
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
CheckPackingListIsDivergent
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_09b_InvoiceChangeStartDateSucceed (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2872, in test_09b_InvoiceChangeStartDateSucceed
self.playSequence(sequence, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
StopPackingList
Tic
DeliverPackingList
Tic
ChangeInvoiceStartDate
CheckInvoiceIsDivergent
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
UnifyStartDateWithDecisionInvoice
Tic
CheckInvoiceNotSplitted
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckInvoiceTransactionRule
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_13_SplitAndDeferInvoice (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 3235, in test_13_SplitAndDeferInvoice
self.playSequence(sequence, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
StopPackingList
Tic
DeliverPackingList
Tic
CheckPackingListIsSolved
CheckPackingListNotSplitted
DecreaseInvoiceLineQuantity
CheckInvoiceIsDivergent
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
SplitAndDeferInvoice
Tic
StartInvoice
Tic
StopInvoice
Tic
DeliverInvoice
Tic
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
CheckInvoiceSplitted
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckInvoiceTransactionRule
SwitchInvoices
StartInvoice
Tic
StopInvoice
Tic
DeliverInvoice
Tic
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_14_AcceptDecisionOnInvoice (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 3302, in test_14_AcceptDecisionOnInvoice
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
StopPackingList
Tic
DeliverPackingList
Tic
CheckPackingListIsSolved
CheckPackingListNotSplitted
DecreaseInvoiceLineQuantity
CheckInvoiceIsDivergent
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
AcceptDecisionQuantityInvoice
Tic
StartInvoice
Tic
StopInvoice
Tic
DeliverInvoice
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckInvoiceTransactionRule
CheckInvoiceNotSplitted
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_16_ManuallyAddedMovements (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 3352, in test_16_ManuallyAddedMovements
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
AddInvoiceLines
Tic
StartInvoice
Tic
CheckSimulationTrees
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_16a_ManuallyAddedMovementsManyTransactions (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2969, in test_16a_ManuallyAddedMovementsManyTransactions
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
AddInvoiceLinesManyTransactions
Tic
CheckInvoiceIsSolved
StartInvoice
Tic
CheckSimulationTrees
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_17_ManuallyAddedWrongMovements (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 3378, in test_17_ManuallyAddedWrongMovements
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
AddWrongInvoiceLines
Tic
StartInvoice
CheckStartInvoiceFail
CheckSimulationTrees
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
ERROR: test_18_compareInvoiceAndPackingList (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 3400, in test_18_compareInvoiceAndPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
> SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
CheckInvoicesConsistency
CheckPackingListInvoice
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 339, in stepSetReadyPackingList
self.modifyPackingListState('set_ready_action', sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 335, in modifyPackingListState
packing_list.portal_workflow.doActionFor(packing_list, transition_name)
File "/usr/lib/erp5/lib/python/Products/CMFCore/WorkflowTool.py", line 294, in doActionFor
raise WorkflowException(
WorkflowException: No workflow provides the "set_ready_action" action.
FAIL: test_01_splitAndDefer (testERP5Simulation.TestERP5Simulation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testERP5Simulation.py", line 523, in test_01_splitAndDefer
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
> CheckPackingListIsNotDivergent
CheckOrderPackingList
IncreasePackingListLineQuantity2
CheckPackingListIsCalculating
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
DecreasePackingListLineQuantity1
CheckPackingListIsCalculating
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
DecreasePackingListLineQuantity10
CheckPackingListIsCalculating
Tic
CheckPackingListIsDiverged
SplitAndDeferPackingList
CheckSolverIsSolving
Tic
CheckPackingListSplitted
CheckPackingListIsSolved
CheckSolverIsSolved
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 225, in stepCheckPackingListIsNotDivergent
self.assertFalse(packing_list.isDivergent())
AssertionError
FAIL: test_01_PackingListDecreaseQuantity (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 971, in test_01_PackingListDecreaseQuantity
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
> CheckPackingListIsNotDivergent
CheckOrderPackingList
DecreasePackingListLineQuantity
CheckPackingListIsCalculating
Tic
CheckPackingListIsDiverged
SplitAndDeferPackingList
Tic
CheckPackingListIsSolved
CheckPackingListSplitted
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 225, in stepCheckPackingListIsNotDivergent
self.assertFalse(packing_list.isDivergent())
AssertionError
FAIL: test_02_PackingListChangeDestination (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 991, in test_02_PackingListChangeDestination
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
> CheckPackingListIsNotDivergent
CheckOrderPackingList
ChangePackingListDestination
CheckPackingListIsCalculating
Tic
CheckPackingListIsDiverged
UnifyDestinationWithDecision
Tic
CheckPackingListIsSolved
CheckPackingListIsNotDivergent
CheckSimulationDestinationUpdated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 225, in stepCheckPackingListIsNotDivergent
self.assertFalse(packing_list.isDivergent())
AssertionError
FAIL: test_04_PackingListDeleteLine (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1027, in test_04_PackingListDeleteLine
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
> CheckPackingListIsNotDivergent
CheckOrderPackingList
CheckSimulationConnected
DeletePackingListLine
CheckPackingListIsNotDivergent
Tic
CheckSimulationDisconnected
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 225, in stepCheckPackingListIsNotDivergent
self.assertFalse(packing_list.isDivergent())
AssertionError
FAIL: test_05_SimulationChangeQuantity (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1046, in test_05_SimulationChangeQuantity
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
> CheckPackingListIsNotDivergent
CheckOrderPackingList
ModifySimulationLineQuantity
Tic
CheckPackingListIsDiverged
AdoptPrevisionQuantity
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckPackingListLineWithNewQuantityPrevision
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 225, in stepCheckPackingListIsNotDivergent
self.assertFalse(packing_list.isDivergent())
AssertionError
FAIL: test_05a_SimulationChangeQuantityAndAcceptDecision (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1065, in test_05a_SimulationChangeQuantityAndAcceptDecision
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
> CheckPackingListIsNotDivergent
CheckOrderPackingList
ModifySimulationLineQuantity
Tic
CheckPackingListIsDiverged
AcceptDecisionQuantity
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckSimulationQuantityUpdated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 225, in stepCheckPackingListIsNotDivergent
self.assertFalse(packing_list.isDivergent())
AssertionError
FAIL: test_05b_SimulationChangeQuantityForMergedLine (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1084, in test_05b_SimulationChangeQuantityForMergedLine
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
> CheckPackingListIsNotDivergent
CheckOrderPackingList
ModifySimulationLineQuantityForMergedLine
Tic
CheckPackingListIsDiverged
AdoptPrevisionQuantity
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckPackingListLineWithNewQuantityPrevisionForMergedLine
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 225, in stepCheckPackingListIsNotDivergent
self.assertFalse(packing_list.isDivergent())
AssertionError
FAIL: test_05c_SimulationChangeQuantityAndAcceptDecisionForMergedLine (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1103, in test_05c_SimulationChangeQuantityAndAcceptDecisionForMergedLine
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
> CheckPackingListIsNotDivergent
CheckOrderPackingList
ModifySimulationLineQuantityForMergedLine
Tic
CheckPackingListIsDiverged
AcceptDecisionQuantity
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckSimulationQuantityUpdatedForMergedLine
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 225, in stepCheckPackingListIsNotDivergent
self.assertFalse(packing_list.isDivergent())
AssertionError
FAIL: test_05e_SimulationUnifyResourceOnSimulationMovementsForNonMergedLines (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1142, in test_05e_SimulationUnifyResourceOnSimulationMovementsForNonMergedLines
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
> CheckPackingListIsNotDivergent
CheckOrderPackingList
ModifySimulationLineResource
Tic
CheckPackingListIsDiverged
AdoptPrevisionResource
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckPackingListLineWithSameResource
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 225, in stepCheckPackingListIsNotDivergent
self.assertFalse(packing_list.isDivergent())
AssertionError
FAIL: test_05f_SimulationChangeAndPartialAcceptDecision (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1170, in test_05f_SimulationChangeAndPartialAcceptDecision
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
> CheckPackingListIsNotDivergent
CheckOrderPackingList
CreateNotVariatedResource
ModifySimulationLineQuantityForMergedLine
ModifyOneSimulationLineResource
ModifySimulationLineStartDate
Tic
CheckPackingListIsDiverged
AcceptDecisionQuantity
Tic
CheckPackingListIsDiverged
AcceptDecisionResource
Tic
CheckPackingListIsDiverged
UnifyStartDateWithDecision
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckSimulationQuantityUpdatedForMergedLine
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 225, in stepCheckPackingListIsNotDivergent
self.assertFalse(packing_list.isDivergent())
AssertionError
FAIL: test_08_AddContainers (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1251, in test_08_AddContainers
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
> CheckPackingListIsNotDivergent
CheckOrderPackingList
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineSmallQuantity
CheckContainerLineSmallQuantity
CheckPackingListIsNotPacked
SetContainerFullQuantity
Tic
CheckPackingListIsPacked
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 225, in stepCheckPackingListIsNotDivergent
self.assertFalse(packing_list.isDivergent())
AssertionError
FAIL: test_09_AddContainersWithVariatedResources (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1277, in test_09_AddContainersWithVariatedResources
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
SetOrderLineFullVCL
CompleteOrderLineMatrix
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
> CheckPackingListIsNotDivergent
CheckOrderPackingList
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineSmallQuantity
CheckContainerLineSmallQuantity
CheckPackingListIsNotPacked
SetContainerFullQuantity
Tic
CheckPackingListIsPacked
ModifySimulationLineStartDate
Tic
CheckPackingListIsDiverged
CheckPackingListIsDivergent
UnifyStartDateWithPrevision
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 225, in stepCheckPackingListIsNotDivergent
self.assertFalse(packing_list.isDivergent())
AssertionError
FAIL: test_10_PackingListIncreaseQuantity (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1307, in test_10_PackingListIncreaseQuantity
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
> CheckPackingListIsNotDivergent
CheckOrderPackingList
IncreasePackingListLineQuantity
CheckPackingListIsCalculating
Tic
CheckPackingListIsDiverged
SplitAndDeferPackingList
Tic
CheckPackingListIsDiverged
CheckPackingListIsDivergent
CheckPackingListNotSolved
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 225, in stepCheckPackingListIsNotDivergent
self.assertFalse(packing_list.isDivergent())
AssertionError
FAIL: test_11_PackingListDecreaseTwoTimesQuantityAndUpdateDelivery (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1343, in test_11_PackingListDecreaseTwoTimesQuantityAndUpdateDelivery
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
> CheckPackingListIsNotDivergent
CheckOrderPackingList
DecreasePackingListLineQuantity
CheckPackingListIsCalculating
Tic
CheckPackingListIsDiverged
SplitAndDeferPackingList
Tic
CheckPackingListIsSolved
CheckPackingListSplitted
DecreasePackingListLineQuantity
CheckPackingListIsCalculating
Tic
CheckPackingListIsDiverged
SplitAndDeferPackingList
Tic
CheckNewPackingListIsDivergent
NewPackingListAdoptPrevisionQuantity
Tic
CheckPackingListIsSolved
CheckPackingListSplittedTwoTimes
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 225, in stepCheckPackingListIsNotDivergent
self.assertFalse(packing_list.isDivergent())
AssertionError
FAIL: test_12_PackingListLineChangeResource (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1387, in test_12_PackingListLineChangeResource
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
> CheckPackingListIsNotDivergent
CheckOrderPackingList
CreateNotVariatedResource
ChangePackingListLineResource
CheckPackingListIsCalculating
Tic
CheckPackingListIsDivergent
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 225, in stepCheckPackingListIsNotDivergent
self.assertFalse(packing_list.isDivergent())
AssertionError
FAIL: test_17_PackingListOrderLineWithAccount (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1568, in test_17_PackingListOrderLineWithAccount
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
CreateSourceAccount
CreateDestinationAccount
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
SetOrderLineSourceAccount
SetOrderLineDestinationAccount
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
> CheckPackingListIsSolved
CheckOrderPackingList
CheckPackingListLineSourceAccount
CheckPackingListLineDestinationAccount
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 211, in stepCheckPackingListIsSolved
self.assertEquals('solved',packing_list.getCausalityState())
AssertionError: 'solved' != 'diverged'
FAIL: test_SplitAndDeferDoNothing (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1367, in test_SplitAndDeferDoNothing
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
> CheckPackingListIsNotDivergent
CheckOrderPackingList
IncreasePackingListLineQuantity
CheckPackingListIsCalculating
Tic
CheckPackingListIsDiverged
SplitAndDeferDoNothingPackingList
Tic
CheckPackingListIsDiverged
CheckPackingListIsDivergent
CheckPackingListNotSolved
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 225, in stepCheckPackingListIsNotDivergent
self.assertFalse(packing_list.isDivergent())
AssertionError
FAIL: test_02_TwoInvoicesFromTwoPackingList (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2631, in test_02_TwoInvoicesFromTwoPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
DecreasePackingListLineQuantity
CheckPackingListIsCalculating
Tic
> CheckPackingListIsDiverged
SplitAndDeferPackingList
Tic
CheckPackingListIsSolved
CheckPackingListSplitted
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
DefineNewPackingListContainer
Tic
CheckNewPackingListIsPacked
SetReadyPackingList
SetReadyNewPackingList
Tic
StartPackingList
StartNewPackingList
Tic
CheckTwoInvoices
RemoveDateMovementGroupForTransactionBuilder
StartTwoInvoices
Tic
CheckTwoInvoicesTransactionLines
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPackingList.py", line 218, in stepCheckPackingListIsDiverged
self.assertEquals('diverged', packing_list.getCausalityState())
AssertionError: 'diverged' != 'solved'
FAIL: test_10_AcceptDecisionOnPackingList (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2937, in test_10_AcceptDecisionOnPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
CheckInvoicingRule
DecreasePackingListLineQuantity
SetContainerFullQuantity
CheckPackingListIsCalculating
Tic
> CheckPackingListIsDiverged
AcceptDecisionQuantity
Tic
CheckPackingListIsSolved
CheckPackingListNotSplitted
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
StopPackingList
Tic
DeliverPackingList
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckInvoiceTransactionRule
(truncated) ...
More information about the Erp5-report
mailing list