[Erp5-report] ERP5 r35980 : 3576 Tests, 7 Errors, 13 Failures, 45 Skips
nobody at svn.erp5.org
nobody at svn.erp5.org
Fri Jun 4 13:22:00 CEST 2010
Test Suite: ERP5
Revision: 35980
Result: FAIL
All tests: 3576
Failures: 13
Errors: 7
Skips: 45
The following tests failed:
testDms (3 errors)
test_Image_conversion_to_base_format_no_original_format_access (testDms.TestDocument), Checks Document.Image
test_Text_conversion_to_base_format_no_original_format_access (testDms.TestDocument), Checks Document.OOoDocument
test_WebPage_conversion_to_base_format_no_original_format_access (testDms.TestDocument), Checks Document.TextDocument
testDmsWithFlare (3 errors)
test_Image_conversion_to_base_format_no_original_format_access (testDmsWithFlare.TestDocumentWithFlare), Checks Document.Image
test_Text_conversion_to_base_format_no_original_format_access (testDmsWithFlare.TestDocumentWithFlare), Checks Document.OOoDocument
test_WebPage_conversion_to_base_format_no_original_format_access (testDmsWithFlare.TestDocumentWithFlare), Checks Document.TextDocument
testERP5Core (1 failures)
test_getPropertyForUid (testERP5Core.TestERP5Core)
testERP5CurrencyExchangeLine (1 failures)
test_CreateCELWithNoBasePrice (testERP5CurrencyExchangeLine.TestCurrencyExchangeLine)
testERP5Simulation (2 failures, 5 skips)
test_09_InvoiceChangeStartDateFail (testERP5Simulation.TestERP5SimulationInvoice)
test_18_compareInvoiceAndPackingList (testERP5Simulation.TestERP5SimulationInvoice)
testFormPrintoutAsODT (1 failures, 1 skips)
test_02_Table_07_CellFormat (testFormPrintoutAsODT.TestFormPrintoutAsODT), 7. Normal case: make sure that it is enable to use ODF cell format setting in FormPrintout
testICal (1 failures)
test_01_renderEvent (testICal.TestICal)
testInvalidationBug (2 failures)
testCommitOrder (testInvalidationBug.TestInvalidationBug), Check order of resources being committed
testLateInvalidationFromZEO (testInvalidationBug.TestInvalidationBug)
testLegacyInvoice (1 failures)
test_Reference (testLegacyInvoice.TestSaleInvoice)
testLegacyPackingList (1 failures)
test_05d_SimulationChangeResourceOnOneSimulationMovementForMergedLine (testLegacyPackingList.TestPackingList)
testOpenOrder (2 failures, 1 errors)
testOpenOrderRule (testOpenOrder.TestOpenOrder)
testBuildingSaleOrder (testOpenOrder.TestOpenOrder)
testPeriodicityDateList (testOpenOrder.TestOpenOrder)
testSerializeForm (1 failures)
test checking if the field values are of the proper type.
The following tests were at least partly skipped:
testBase (3 skips)
test_NonIndexable (testBase.TestBase), check if a document is not indexed where we set isIndexable=0 in the same transaction of newContent(). ... skipped 'isIndexable is not designed to work like tested here, this test must be rewritten once we know how to handle correctly templates'
test_NonIndexable2 (testBase.TestBase), check if a document is not indexed where we call edit() and set isIndexable=0 after it is already indexed. ... skipped 'isIndexable is not designed to work like tested here, this test must be rewritten once we know how to handle correctly templates'
test_NonIndexable3 (testBase.TestBase), check if a document is not indexed where we set isIndexable=0 and call edit() after it is already indexed. ... skipped 'isIndexable is not designed to work like tested here, this test must be rewritten once we know how to handle correctly templates'
testBusinessTemplate (2 skips)
testCMFActivity (1 skips)
testERP5Base (1 skips)
testERP5Catalog (3 skips)
test_49_IndexInOrderedSearchFolder (testERP5Catalog.TestERP5Catalog) ... skipped 'TODO ERP5'
test_SubDocumentsWithAcquireLocalRoleSecurityIndexing (testERP5Catalog.TestERP5Catalog) ... skipped 'TODO ERP5'
test_sortOnRelatedKeyWithUnsetRelation (testERP5Catalog.TestERP5Catalog) ... skipped 'TODO ERP5'
testERP5Interfaces (13 skips)
testERP5Simulation (5 skips)
testERP5TypeInterfaces (1 skips)
testFormPrintoutAsODT (1 skips)
test_09_FieldReplacementWithValidation (testFormPrintoutAsODT.TestFormPrintoutAsODT) ... skipped 'Disable validation because OOo does not produce compliant xml, and RelaxNG status is still draft'
testMRP (4 skips)
test_TransformationRule_expand_concurrent (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationRule_expand_reexpand (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationRule_getHeadProductionPathList (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
test_TransformationSourcingRule_expand (testMRP.TestMRPImplementation) ... skipped 'Unfinished experimental feature'
testProxyField (1 skips)
testSQLCachedWorklist (1 skips)
test_02_related_key (testSQLCachedWorklist.TestSQLCachedWorklist) ... skipped 'TODO ERP5'
testSelectionTool (7 skips)
skipped 'Test to be written'
testPage (testSelectionTool.TestSelectionTool) ... skipped 'Test to be written'
testView (testSelectionTool.TestSelectionTool) ... skipped 'Test to be written'
skipped 'Test to be written'
testDeleteGlobalSelection (testSelectionTool.TestSelectionToolMemcachedStorage) ... skipped 'To be decided if implementation is required'
testPage (testSelectionTool.TestSelectionToolMemcachedStorage) ... skipped 'Test to be written'
testView (testSelectionTool.TestSelectionToolMemcachedStorage) ... skipped 'Test to be written'
testTemplate (1 skips)
testTranslation (1 skips)
-------------- next part --------------
ERROR: test_Image_conversion_to_base_format_no_original_format_access (testDms.TestDocument), Checks Document.Image
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1786, in test_Image_conversion_to_base_format_no_original_format_access
'TEST-en-002.png'
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1759, in _test_document_conversion_to_base_format_no_original_format_access
dummy = document.convert(format='text')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/mixin/document.py", line 62, in convert
return self._convert(format, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/Document/Image.py", line 335, in _convert
mime_type, data = self._convertToText(format)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/Document/Image.py", line 313, in _convertToText
content = self.getData()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/Document/File.py", line 179, in getData
self._checkConversionFormatPermission(None)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/mixin/document.py", line 98, in _checkConversionFormatPermission
raise Unauthorized('Document: user does not have enough permission'\
Unauthorized: Document: user does not have enough permission to access document in original format
ERROR: test_Text_conversion_to_base_format_no_original_format_access (testDms.TestDocument), Checks Document.OOoDocument
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1779, in test_Text_conversion_to_base_format_no_original_format_access
'TEST-en-002.odt'
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1759, in _test_document_conversion_to_base_format_no_original_format_access
dummy = document.convert(format='text')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5OOo/Document/OOoDocument.py", line 376, in convert
mime, data = self._convert(format)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5OOo/Document/OOoDocument.py", line 285, in _convert
enc(str(self.getBaseData())),
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/mixin/base_convertable.py", line 83, in getBaseData
self._checkConversionFormatPermission(None)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/mixin/document.py", line 98, in _checkConversionFormatPermission
raise Unauthorized('Document: user does not have enough permission'\
Unauthorized: Document: user does not have enough permission to access document in original format
ERROR: test_WebPage_conversion_to_base_format_no_original_format_access (testDms.TestDocument), Checks Document.TextDocument
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1765, in test_WebPage_conversion_to_base_format_no_original_format_access
'TEST-text-iso8859-1.txt'
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1759, in _test_document_conversion_to_base_format_no_original_format_access
dummy = document.convert(format='text')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/mixin/document.py", line 62, in convert
return self._convert(format, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/Document/TextDocument.py", line 151, in _convert
text_content = self.getTextContent()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/Document/TextDocument.py", line 365, in getTextContent
self._checkConversionFormatPermission(None)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/mixin/document.py", line 98, in _checkConversionFormatPermission
raise Unauthorized('Document: user does not have enough permission'\
Unauthorized: Document: user does not have enough permission to access document in original format
ERROR: test_Image_conversion_to_base_format_no_original_format_access (testDmsWithFlare.TestDocumentWithFlare), Checks Document.Image
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1786, in test_Image_conversion_to_base_format_no_original_format_access
'TEST-en-002.png'
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1759, in _test_document_conversion_to_base_format_no_original_format_access
dummy = document.convert(format='text')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/mixin/document.py", line 62, in convert
return self._convert(format, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/Image.py", line 335, in _convert
mime_type, data = self._convertToText(format)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/Image.py", line 313, in _convertToText
content = self.getData()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/File.py", line 179, in getData
self._checkConversionFormatPermission(None)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/mixin/document.py", line 98, in _checkConversionFormatPermission
raise Unauthorized('Document: user does not have enough permission'\
Unauthorized: Document: user does not have enough permission to access document in original format
ERROR: test_Text_conversion_to_base_format_no_original_format_access (testDmsWithFlare.TestDocumentWithFlare), Checks Document.OOoDocument
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1779, in test_Text_conversion_to_base_format_no_original_format_access
'TEST-en-002.odt'
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1759, in _test_document_conversion_to_base_format_no_original_format_access
dummy = document.convert(format='text')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5OOo/Document/OOoDocument.py", line 376, in convert
mime, data = self._convert(format)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5OOo/Document/OOoDocument.py", line 285, in _convert
enc(str(self.getBaseData())),
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/mixin/base_convertable.py", line 83, in getBaseData
self._checkConversionFormatPermission(None)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/mixin/document.py", line 98, in _checkConversionFormatPermission
raise Unauthorized('Document: user does not have enough permission'\
Unauthorized: Document: user does not have enough permission to access document in original format
ERROR: test_WebPage_conversion_to_base_format_no_original_format_access (testDmsWithFlare.TestDocumentWithFlare), Checks Document.TextDocument
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1765, in test_WebPage_conversion_to_base_format_no_original_format_access
'TEST-text-iso8859-1.txt'
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1759, in _test_document_conversion_to_base_format_no_original_format_access
dummy = document.convert(format='text')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/mixin/document.py", line 62, in convert
return self._convert(format, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/TextDocument.py", line 151, in _convert
text_content = self.getTextContent()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/TextDocument.py", line 365, in getTextContent
self._checkConversionFormatPermission(None)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/mixin/document.py", line 98, in _checkConversionFormatPermission
raise Unauthorized('Document: user does not have enough permission'\
Unauthorized: Document: user does not have enough permission to access document in original format
FAIL: test_getPropertyForUid (testERP5Core.TestERP5Core)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testERP5Core.py", line 498, in test_getPropertyForUid
self.assertEquals(error_list, [])
AssertionError: [('portal_categories', 99410L, None), ('portal_tests', 99303L, None)] != []
FAIL: test_CreateCELWithNoBasePrice (testERP5CurrencyExchangeLine.TestCurrencyExchangeLine)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testERP5CurrencyExchangeLine.py", line 508, in test_CreateCELWithNoBasePrice
327979)
AssertionError: 500.0 != 327979
FAIL: test_09_InvoiceChangeStartDateFail (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2828, in test_09_InvoiceChangeStartDateFail
self.playSequence(sequence, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
ChangeInvoiceStartDate
CheckInvoiceIsDivergent
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
UnifyStartDateWithDecisionInvoice
Tic
CheckInvoiceNotSplitted
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
> CheckPackingListIsDivergent
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPackingList.py", line 189, in stepCheckPackingListIsDivergent
self.assertTrue(packing_list.isDivergent())
AssertionError
FAIL: test_18_compareInvoiceAndPackingList (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testInvoice.py", line 3400, in test_18_compareInvoiceAndPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
CheckInvoicesConsistency
> CheckPackingListInvoice
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testInvoice.py", line 608, in stepCheckPackingListInvoice
self.assertEquals(packing_list.getSource(), invoice.getSource())
AssertionError: 'organisation_module/144' != 'organisation_module/146'
FAIL: test_02_Table_07_CellFormat (testFormPrintoutAsODT.TestFormPrintoutAsODT), 7. Normal case: make sure that it is enable to use ODF cell format setting in FormPrintout
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testFormPrintoutAsODT.py", line 633, in test_02_Table_07_CellFormat
self.assertEqual(date_column.attrib[date_value_attrib], '2009-04-20')
AssertionError: '2009-04-19' != '2009-04-20'
FAIL: test_01_renderEvent (testICal.TestICal)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testICal.py", line 151, in test_01_renderEvent
self.assertEquals( # if this fail for you, try to set $TZ to Europe/Paris
AssertionError: '20070815T143000Z' != '20070815T083000Z'
FAIL: testCommitOrder (testInvalidationBug.TestInvalidationBug), Check order of resources being committed
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvalidationBug.py", line 92, in testCommitOrder
self.assertEqual(result_list[-2], [1,0]) # catalog
AssertionError: [1, 1] != [1, 0]
FAIL: testLateInvalidationFromZEO (testInvalidationBug.TestInvalidationBug)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInvalidationBug.py", line 168, in testLateInvalidationFromZEO
self.assertNoPendingMessage()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ProcessingNodeTestCase.py", line 128, in assertNoPendingMessage
self.fail(error_message)
AssertionError: These messages are pending: [('/erp5_portal_dbc865b0f58a63ce83de451b148c0de2/organisation_module/2', 'immediateReindexObject', -3, 0)]
Last error message:
KeyError
'2'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1189, in invokeGroup
Module Products.CMFActivity.ActivityTool, line 213, in getObject
Module OFS.Traversable, line 233, in unrestrictedTraverse
- __traceback_info__: ([], '2')
Module OFS.ObjectManager, line 715, in __getitem__
KeyError: '2'
FAIL: test_Reference (testLegacyInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Legacy/tests/testLegacyInvoice.py", line 3299, in test_Reference
self.assertEquals('1', invoice.getReference())
AssertionError: '1' != '5'
FAIL: test_05d_SimulationChangeResourceOnOneSimulationMovementForMergedLine (testLegacyPackingList.TestPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Legacy/tests/testLegacyPackingList.py", line 1099, in test_05d_SimulationChangeResourceOnOneSimulationMovementForMergedLine
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
CheckPackingListIsNotDivergent
CheckOrderPackingList
CreateNotVariatedResource
ModifyOneSimulationLineResource
Tic
CheckPackingListIsDiverged
AdoptPrevisionResource
Tic
CheckPackingListIsNotDivergent
> CheckPackingListIsSolved
CheckPackingListLineWithDifferentResource
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Legacy/tests/testLegacyPackingList.py", line 211, in stepCheckPackingListIsSolved
self.assertEquals('solved',packing_list.getCausalityState())
AssertionError: 'solved' != 'diverged'
ERROR: testOpenOrderRule (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 284, in testOpenOrderRule
calculation_base_date=DateTime(3000,2,9))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Legacy/Document/OpenOrderRule.py", line 84, in expand
calculation_base_date=calculation_base_date,
TypeError: _getOrderDateScheduleTupleList() got multiple values for keyword argument 'calculation_base_date'
FAIL: testBuildingSaleOrder (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 400, in testBuildingSaleOrder
self.assertEqual(len(open_sale_order.getCausalityRelatedValueList(portal_type='Sale Order')), 9)
AssertionError: 0 != 9
FAIL: testPeriodicityDateList (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 151, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 185, in testPeriodicityDateList
[(D(2008,2,1,0,1), DateTime(2008,2,29)),
AssertionError: [(DateTime('2008/02/01 00:01:00 US/Eastern'), DateTime('2008/02/29')), (DateTime('2008/03/01 00:01:00 US/Eastern'), DateTime('2008/03/31')), (DateTime('2008/04/01 00:01:00 US/Eastern'), DateTime('2008/04/30')), (DateTime('2008/05/01 00:01:00 US/Eastern'), DateTime('2008/05/31')), (DateTime('2008/06/01 00:01:00 US/Eastern'), DateTime('2008/06/30')), (DateTime('2008/07/01 00:01:00 US/Eastern'), DateTime('2008/07/31')), (DateTime('2008/08/01 00:01:00 US/Eastern'), DateTime('2008/08/31')), (DateTime('2008/09/01 00:01:00 US/Eastern'), DateTime('2008/09/30')), (DateTime('2008/10/01 00:01:00 US/Eastern'), DateTime('2008/10/31')), (DateTime('2008/11/01 00:01:00 US/Eastern'), DateTime('2008/11/30'))] != [(DateTime('2008/02/01 00:01:00 US/Eastern'), DateTime('2008/02/29')), (DateTime('2008/03/01 00:01:00 US/Eastern'), DateTime('2008/03/31')), (DateTime('2008/04/01 00:01:00 GMT-4'), DateTime('2008/04/30')), (DateTime('2008/05/01 00:01:00 GMT-4'), DateTime('2008/05/31')), (DateTime('2008/06/01 00:01:00 GMT-4'), DateTime('2008/06/30')), (DateTime('2008/07/01 00:01:00 GMT-4'), DateTime('2008/07/31')), (DateTime('2008/08/01 00:01:00 GMT-4'), DateTime('2008/08/31')), (DateTime('2008/09/01 00:01:00 GMT-4'), DateTime('2008/09/30')), (DateTime('2008/10/01 00:01:00 GMT-4'), DateTime('2008/10/31')), (DateTime('2008/11/01 00:01:00 GMT-4'), DateTime('2008/11/30'))]
FAIL: test checking if the field values are of the proper type.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/Formulator/tests/testSerializeForm.py", line 358, in test_fieldValueTypes
self.assertEquals(field.values, field2.values)
AssertionError: {'alternate_name': '', 'title': 'Test Title', 'date_separator': '', 'editable': 0, 'input_order': 'mdy', 'start_datetime': None, 'description': '', 'default_now': 0, 'allow_empty_time': 0, 'ampm_time_style': 0, 'hide_day': 0, 'date_only': 0, 'time_separator': '$', 'hidden': 0, 'default': None, 'css_class': 'test_css', 'required': 1, 'enabled': 1, 'input_style': 'list', 'external_validator': '', 'hidden_day_is_last_day': 0, 'end_datetime': None, 'timezone_style': 0} != {'alternate_name': '', 'title': 'Test Title', 'date_separator': '', 'editable': 0, 'input_order': 'mdy', 'start_datetime': '', 'description': '', 'default_now': 0, 'allow_empty_time': 0, 'ampm_time_style': 0, 'hide_day': 0, 'date_only': 0, 'time_separator': '$', 'hidden': 0, 'default': '', 'css_class': 'test_css', 'required': 1, 'enabled': 1, 'input_style': 'list', 'external_validator': '', 'hidden_day_is_last_day': 0, 'end_datetime': '', 'timezone_style': 0}
More information about the Erp5-report
mailing list