[Erp5-report] ERP5 r34170 : 3416 Tests, 5 Errors, 20 Failures, 40 Skips
nobody at svn.erp5.org
nobody at svn.erp5.org
Sat Mar 27 02:05:24 CET 2010
Test Suite: ERP5
Revision: 34170
Result: FAIL
All tests: 3416
Failures: 20
Errors: 5
Skips: 40
The following tests failed:
testBusinessTemplate (1 failures, 2 skips)
test_163_UpdateSkinFolderWithRegisteredSkinSelection (testBusinessTemplate.TestBusinessTemplate)
testERP5Simulation (5 failures, 1 skips)
test_03_PackingListChangeStartDate (testERP5Simulation.TestERP5SimulationPackingList)
test_06_SimulationChangeStartDate (testERP5Simulation.TestERP5SimulationPackingList)
test_07_SimulationChangeStartDateWithTwoOrderLine (testERP5Simulation.TestERP5SimulationPackingList)
test_07a_SimulationChangeStartDateWithTwoOrderLine (testERP5Simulation.TestERP5SimulationPackingList)
test_09_InvoiceChangeStartDateFail (testERP5Simulation.TestERP5SimulationInvoice)
testFormPrintoutAsODT (1 failures, 1 skips)
test_02_Table_07_CellFormat (testFormPrintoutAsODT.TestFormPrintoutAsODT), 7. Normal case: make sure that it is enable to use ODF cell format setting in FormPrintout
testICal (1 failures)
test_01_renderEvent (testICal.TestICal)
testLegacyPackingList (1 failures)
test_05d_SimulationChangeResourceOnOneSimulationMovementForMergedLine (testLegacyPackingList.TestPackingList)
testOpenOrder (2 failures)
testOpenOrderRule (testOpenOrder.TestOpenOrder)
testPeriodicityDateList (testOpenOrder.TestOpenOrder)
testPayroll (4 errors)
test_AccountingLineGeneration (testPayroll.TestPayroll)
test_NetSalaryReport (testPayroll.TestPayroll)
test_PayrollTaxesReport (testPayroll.TestPayroll)
test_PayrollTaxesReportDifferentSalaryRange (testPayroll.TestPayroll)
testPayroll_l10n_fr (1 errors)
test_01_getYearToDateSlice (testPayroll_l10n_fr.TestPayroll_l10n_fr), Check that is possible to calculate the total amount spend on a slice
testProxyField (1 failures)
testSkinSelectionTemplateField (testProxyField.TestProxyField)
testSerializeForm (1 failures)
test checking if the field values are of the proper type.
testTemplate (2 failures)
test_NonDeliveryTemplateNotIndexable (testTemplate.TestTemplate)
test_manyTemplatesWithoutReindexation (testTemplate.TestTemplate), Check what happen when templates are created one by one without reindexation
testTradeModelLine (1 failures)
test_tradeModelLineWithTargetLevelSetting (testTradeModelLine.TestTradeModelLineSale)
testXHTML (4 failures, 1 skips)
test_deadProxyFields (testXHTML.TestXHTML)
test_erp5_dms_Drawing_OOoDocument_viewAsWeb (testXHTML.TestXHTML)
test_erp5_dms_Presentation_OOoDocument_viewAsWeb (testXHTML.TestXHTML)
test_listActionInListbox (testXHTML.TestXHTML)
The following tests were at least partly skipped:
testBase (3 skips)
testBusinessTemplate (2 skips)
testDms (1 skips)
testDmsWithFlare (1 skips)
testERP5Catalog (4 skips)
testERP5Interfaces (13 skips)
testERP5Simulation (1 skips)
testERP5TypeInterfaces (1 skips)
testFormPrintoutAsODT (1 skips)
testMRP (4 skips)
testSQLCachedWorklist (1 skips)
testSelectionTool (7 skips)
testXHTML (1 skips)
The following tests have an unknown status:
'Products/ERP5Type/tests/runUnitTest.py' '--erp5_sql_connection_string' 'test2 test' 'testKMGadget'
-------------- next part --------------
FAIL: test_163_UpdateSkinFolderWithRegisteredSkinSelection (testBusinessTemplate.TestBusinessTemplate)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 6209, in test_163_UpdateSkinFolderWithRegisteredSkinSelection
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateSkinFolder
SetSkinFolderRegistredSelections
CreateNewBusinessTemplate
UseExportBusinessTemplate
AddSkinFolderToBusinessTemplate
AddRegistredSelectionToBusinessTemplate
BuildBusinessTemplate
SaveBusinessTemplate
RemoveSkinFolder
RemoveBusinessTemplate
RemoveAllTrashBins
ImportBusinessTemplate
UseImportBusinessTemplate
InstallBusinessTemplate
Tic
CheckSkinSelectionAdded
ModifySkinFolder
CopyBusinessTemplate
Tic
EditBusinessTemplate
BuildBusinessTemplate
CheckBuiltBuildingState
SaveBusinessTemplate
UnmodifySkinFolder
ImportBusinessTemplate
Tic
UseImportBusinessTemplate
InstallWithoutForceBusinessTemplate
Tic
> CheckModifiedSkinFolderExists
CheckSkinSelectionAdded
SetSkinFolderRegistredSelections2
CopyBusinessTemplate
EditRegistredSelectionToBusinessTemplate
BuildBusinessTemplate
InstallCurrentBusinessTemplate
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 6151, in stepCheckModifiedSkinFolderExists
self.assertEquals(
AssertionError: 99 != None
FAIL: test_03_PackingListChangeStartDate (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1011, in test_03_PackingListChangeStartDate
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
CheckPackingListIsNotDivergent
CheckOrderPackingList
ChangePackingListStartDate
CheckPackingListIsCalculating
Tic
CheckPackingListIsDiverged
UnifyStartDateWithDecision
Tic
CheckPackingListIsSolved
CheckPackingListIsNotDivergent
> CheckSimulationStartDateUpdated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPackingList.py", line 433, in stepCheckSimulationStartDateUpdated
self.assertEquals(simulation_movement.getStartDate(),self.datetime + 15)
AssertionError: DateTime('2010/04/05 18:18:36.349 GMT-4') != DateTime('2010/04/10 18:18:36.349 GMT-4')
FAIL: test_06_SimulationChangeStartDate (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1189, in test_06_SimulationChangeStartDate
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
CheckPackingListIsNotDivergent
CheckOrderPackingList
ModifySimulationLineStartDate
Tic
CheckPackingListIsDiverged
UnifyStartDateWithPrevision
Tic
CheckPackingListIsSolved
> CheckNewPackingListAfterStartDateAdopt
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPackingList.py", line 736, in stepCheckNewPackingListAfterStartDateAdopt
self.assertEquals(packing_list.getStartDate(),self.datetime+15)
AssertionError: DateTime('2010/04/05 18:18:36.349 GMT-4') != DateTime('2010/04/10 18:18:36.349 GMT-4')
FAIL: test_07_SimulationChangeStartDateWithTwoOrderLine (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1210, in test_07_SimulationChangeStartDateWithTwoOrderLine
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
CheckPackingListIsNotDivergent
CheckOrderPackingList
ModifySimulationLineStartDate
Tic
CheckPackingListIsDiverged
CheckPackingListIsDivergent
UnifyStartDateWithPrevision
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
> CheckNewPackingListAfterStartDateAdopt
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPackingList.py", line 736, in stepCheckNewPackingListAfterStartDateAdopt
self.assertEquals(packing_list.getStartDate(),self.datetime+15)
AssertionError: DateTime('2010/04/05 18:18:36.349 GMT-4') != DateTime('2010/04/10 18:18:36.349 GMT-4')
FAIL: test_07a_SimulationChangeStartDateWithTwoOrderLine (testERP5Simulation.TestERP5SimulationPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPackingList.py", line 1231, in test_07a_SimulationChangeStartDateWithTwoOrderLine
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
CheckPackingListIsNotDivergent
CheckOrderPackingList
ModifyOneSimulationLineStartDate
Tic
CheckPackingListIsDiverged
CheckPackingListIsDivergent
UnifyStartDateWithPrevision
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
> CheckNewPackingListAfterStartDateAdopt
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPackingList.py", line 736, in stepCheckNewPackingListAfterStartDateAdopt
self.assertEquals(packing_list.getStartDate(),self.datetime+15)
AssertionError: DateTime('2010/04/05 18:18:36.349 GMT-4') != DateTime('2010/04/10 18:18:36.349 GMT-4')
FAIL: test_09_InvoiceChangeStartDateFail (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2832, in test_09_InvoiceChangeStartDateFail
self.playSequence(sequence, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
ChangeInvoiceStartDate
CheckInvoiceIsDivergent
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
UnifyStartDateWithDecisionInvoice
Tic
CheckInvoiceNotSplitted
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
> CheckPackingListIsDivergent
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPackingList.py", line 189, in stepCheckPackingListIsDivergent
self.assertTrue(packing_list.isDivergent())
AssertionError
FAIL: test_02_Table_07_CellFormat (testFormPrintoutAsODT.TestFormPrintoutAsODT), 7. Normal case: make sure that it is enable to use ODF cell format setting in FormPrintout
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testFormPrintoutAsODT.py", line 633, in test_02_Table_07_CellFormat
self.assertEqual(date_column.attrib[date_value_attrib], '2009-04-20')
AssertionError: '2009-04-19' != '2009-04-20'
FAIL: test_01_renderEvent (testICal.TestICal)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testICal.py", line 151, in test_01_renderEvent
self.assertEquals( # if this fail for you, try to set $TZ to Europe/Paris
AssertionError: '20070815T143000Z' != '20070815T083000Z'
Loading Zope ...
Cleaning static files ...
Instance at '/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test' loaded ...
Traceback (most recent call last):
File "Products/ERP5Type/tests/runUnitTest.py", line 610, in ?
main()
File "Products/ERP5Type/tests/runUnitTest.py", line 593, in main
debug=debug)
File "Products/ERP5Type/tests/runUnitTest.py", line 451, in runUnitTestList
suite = test_loader.loadTestsFromNames(test_list)
File "/usr/lib64/python2.4/unittest.py", line 556, in loadTestsFromNames
suites = [self.loadTestsFromName(name, module) for name in names]
File "Products/ERP5Type/tests/runUnitTest.py", line 249, in loadTestsFromName
return unittest.TestLoader.loadTestsFromName(self, name, module)
File "/usr/lib64/python2.4/unittest.py", line 524, in loadTestsFromName
module = __import__('.'.join(parts_copy))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/bt5/erp5_km/TestTemplateItem/testKMGadget.py", line 35, in ?
import simplejson as json
ImportError: No module named simplejson
FAIL: test_05d_SimulationChangeResourceOnOneSimulationMovementForMergedLine (testLegacyPackingList.TestPackingList)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Legacy/tests/testLegacyPackingList.py", line 1099, in test_05d_SimulationChangeResourceOnOneSimulationMovementForMergedLine
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateProject1
CreateProject2
CreateOrder
CreateCurrency
SetOrderPriceCurrency
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
CheckOrderSimulation
CheckDeliveryBuilding
CheckPackingListIsNotDivergent
CheckOrderPackingList
CreateNotVariatedResource
ModifyOneSimulationLineResource
Tic
CheckPackingListIsDiverged
AdoptPrevisionResource
Tic
CheckPackingListIsNotDivergent
> CheckPackingListIsSolved
CheckPackingListLineWithDifferentResource
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Legacy/tests/testLegacyPackingList.py", line 211, in stepCheckPackingListIsSolved
self.assertEquals('solved',packing_list.getCausalityState())
AssertionError: 'solved' != 'diverged'
FAIL: testOpenOrderRule (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 303, in testOpenOrderRule
[(DateTime(3000,2,10,10,0), DateTime(3000,2,11,10,0)),
AssertionError: [(DateTime('3000/02/10 10:00:00 US/Eastern'), DateTime('3000/02/11 10:00:00 US/Eastern')), (DateTime('3000/02/17 10:00:00 US/Eastern'), DateTime('3000/02/18 10:00:00 US/Eastern')), (DateTime('3000/02/24 10:00:00 US/Eastern'), DateTime('3000/02/25 10:00:00 US/Eastern')), (DateTime('3000/03/03 10:00:00 US/Eastern'), DateTime('3000/03/04 10:00:00 US/Eastern')), (DateTime('3000/03/10 10:00:00 US/Eastern'), DateTime('3000/03/11 10:00:00 US/Eastern'))] != [(DateTime('3000/02/10 10:00:00 US/Eastern'), DateTime('3000/02/11 10:00:00 US/Eastern')), (DateTime('3000/02/17 10:00:00 US/Eastern'), DateTime('3000/02/18 10:00:00 US/Eastern')), (DateTime('3000/02/24 10:00:00 US/Eastern'), DateTime('3000/02/25 10:00:00 US/Eastern')), (DateTime('3000/03/03 10:00:00 US/Eastern'), DateTime('3000/03/04 10:00:00 US/Eastern')), (DateTime('3000/03/10 10:00:00 GMT-4'), DateTime('3000/03/11 10:00:00 GMT-4'))]
FAIL: testPeriodicityDateList (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 185, in testPeriodicityDateList
[(D(2008,2,1,0,1), DateTime(2008,2,29)),
AssertionError: [(DateTime('2008/02/01 00:01:00 US/Eastern'), DateTime('2008/02/29')), (DateTime('2008/03/01 00:01:00 US/Eastern'), DateTime('2008/03/31')), (DateTime('2008/04/01 00:01:00 US/Eastern'), DateTime('2008/04/30')), (DateTime('2008/05/01 00:01:00 US/Eastern'), DateTime('2008/05/31')), (DateTime('2008/06/01 00:01:00 US/Eastern'), DateTime('2008/06/30')), (DateTime('2008/07/01 00:01:00 US/Eastern'), DateTime('2008/07/31')), (DateTime('2008/08/01 00:01:00 US/Eastern'), DateTime('2008/08/31')), (DateTime('2008/09/01 00:01:00 US/Eastern'), DateTime('2008/09/30')), (DateTime('2008/10/01 00:01:00 US/Eastern'), DateTime('2008/10/31')), (DateTime('2008/11/01 00:01:00 US/Eastern'), DateTime('2008/11/30'))] != [(DateTime('2008/02/01 00:01:00 US/Eastern'), DateTime('2008/02/29')), (DateTime('2008/03/01 00:01:00 US/Eastern'), DateTime('2008/03/31')), (DateTime('2008/04/01 00:01:00 GMT-4'), DateTime('2008/04/30')), (DateTime('2008/05/01 00:01:00 GMT-4'), DateTime('2008/05/31')), (DateTime('2008/06/01 00:01:00 GMT-4'), DateTime('2008/06/30')), (DateTime('2008/07/01 00:01:00 GMT-4'), DateTime('2008/07/31')), (DateTime('2008/08/01 00:01:00 GMT-4'), DateTime('2008/08/31')), (DateTime('2008/09/01 00:01:00 GMT-4'), DateTime('2008/09/30')), (DateTime('2008/10/01 00:01:00 GMT-4'), DateTime('2008/10/31')), (DateTime('2008/11/01 00:01:00 GMT-4'), DateTime('2008/11/30'))]
ERROR: test_AccountingLineGeneration (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 3175, in test_AccountingLineGeneration
self.stepTic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1104, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 747, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_0151b90952d6b37c56499729ec9bc6d1/accounting_module/1', 'Delivery_updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_invoice_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 295, in __call__
Module Shared.DC.Scripts.Bindings, line 311, in __call__
Module Shared.DC.Scripts.Bindings, line 348, in _bindAndExec
Module Products.ERP5Type.tests.ERP5TypeTestCase, line 1299, in _exec
Module Products.PythonScripts.PythonScript, line 325, in _exec
Module None, line 45, in Delivery_updateAppliedRule
- <PythonScript at /erp5_portal_0151b90952d6b37c56499729ec9bc6d1/Delivery_updateAppliedRule used for /erp5_portal_0151b90952d6b37c56499729ec9bc6d1/accounting_module/1>
- Line 45
Module AccessControl.ZopeGuards, line 339, in guarded_apply
Module AccessControl.ZopeGuards, line 361, in builtin_guarded_apply
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 726, in updateAppliedRule
ValueError: No such rule as 'default_invoice_rule' is found
ERROR: test_NetSalaryReport (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 2903, in test_NetSalaryReport
self.stepTic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1104, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 747, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_0151b90952d6b37c56499729ec9bc6d1/accounting_module/2', 'Delivery_updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_invoice_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 295, in __call__
Module Shared.DC.Scripts.Bindings, line 311, in __call__
Module Shared.DC.Scripts.Bindings, line 348, in _bindAndExec
Module Products.ERP5Type.tests.ERP5TypeTestCase, line 1299, in _exec
Module Products.PythonScripts.PythonScript, line 325, in _exec
Module None, line 45, in Delivery_updateAppliedRule
- <PythonScript at /erp5_portal_0151b90952d6b37c56499729ec9bc6d1/Delivery_updateAppliedRule used for /erp5_portal_0151b90952d6b37c56499729ec9bc6d1/accounting_module/2>
- Line 45
Module AccessControl.ZopeGuards, line 339, in guarded_apply
Module AccessControl.ZopeGuards, line 361, in builtin_guarded_apply
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 726, in updateAppliedRule
ValueError: No such rule as 'default_invoice_rule' is found
ERROR: test_PayrollTaxesReport (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 2508, in test_PayrollTaxesReport
self.stepTic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1104, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 747, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_0151b90952d6b37c56499729ec9bc6d1/accounting_module/5', 'Delivery_updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_invoice_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 295, in __call__
Module Shared.DC.Scripts.Bindings, line 311, in __call__
Module Shared.DC.Scripts.Bindings, line 348, in _bindAndExec
Module Products.ERP5Type.tests.ERP5TypeTestCase, line 1299, in _exec
Module Products.PythonScripts.PythonScript, line 325, in _exec
Module None, line 45, in Delivery_updateAppliedRule
- <PythonScript at /erp5_portal_0151b90952d6b37c56499729ec9bc6d1/Delivery_updateAppliedRule used for /erp5_portal_0151b90952d6b37c56499729ec9bc6d1/accounting_module/5>
- Line 45
Module AccessControl.ZopeGuards, line 339, in guarded_apply
Module AccessControl.ZopeGuards, line 361, in builtin_guarded_apply
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 726, in updateAppliedRule
ValueError: No such rule as 'default_invoice_rule' is found
ERROR: test_PayrollTaxesReportDifferentSalaryRange (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll.py", line 2706, in test_PayrollTaxesReportDifferentSalaryRange
self.stepTic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1104, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 747, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_0151b90952d6b37c56499729ec9bc6d1/accounting_module/7', 'Delivery_updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_invoice_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 295, in __call__
Module Shared.DC.Scripts.Bindings, line 311, in __call__
Module Shared.DC.Scripts.Bindings, line 348, in _bindAndExec
Module Products.ERP5Type.tests.ERP5TypeTestCase, line 1299, in _exec
Module Products.PythonScripts.PythonScript, line 325, in _exec
Module None, line 45, in Delivery_updateAppliedRule
- <PythonScript at /erp5_portal_0151b90952d6b37c56499729ec9bc6d1/Delivery_updateAppliedRule used for /erp5_portal_0151b90952d6b37c56499729ec9bc6d1/accounting_module/7>
- Line 45
Module AccessControl.ZopeGuards, line 339, in guarded_apply
Module AccessControl.ZopeGuards, line 361, in builtin_guarded_apply
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 726, in updateAppliedRule
ValueError: No such rule as 'default_invoice_rule' is found
ERROR: test_01_getYearToDateSlice (testPayroll_l10n_fr.TestPayroll_l10n_fr), Check that is possible to calculate the total amount spend on a slice
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPayroll_l10n_fr.py", line 118, in test_01_getYearToDateSlice
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateUrssafService
CreateLabourService
CreateEmployer
CreateEmployee
CreatePriceCurrency
CreateModelWithSlices
SetCurrencyOnModel
ModelCreateUrssafModelLineWithSlices
UrssafModelLineWithSlicesCreateMovements
CreateBasicPaysheet
PaysheetSetModelAndApplyIt
PaysheetCreateLabourPaySheetLine
CreateBusinessProcess
CreateBusinessPath
CreateUrssafRoubaixOrganisation
ModifyBusinessPathTradePhase
ModelSpecialiseBusinessProcess
Tic
CheckUpdateAggregatedAmountListReturnUsingSlices
PaysheetApplyTransformation
Tic
CheckPaysheetLineAreCreatedUsingSlices
CheckPaysheetLineAmountsUsingSlices
CheckUpdateAggregatedAmountListReturnNothing
CheckPaysheetLineAmountsUsingSlices
CreateBasicPaysheet
PaysheetSetModelAndApplyIt
PaysheetCreateLabourPaySheetLine
CreateBusinessProcess
CreateBusinessPath
CreateUrssafRoubaixOrganisation
ModifyBusinessPathTradePhase
ModelSpecialiseBusinessProcess
Tic
CheckUpdateAggregatedAmountListReturnUsingSlices
PaysheetApplyTransformation
Tic
CheckPaysheetLineAreCreatedUsingSlices
CheckPaysheetLineAmountsUsingSlices
CheckUpdateAggregatedAmountListReturnNothing
CheckPaysheetLineAmountsUsingSlices
> CheckYearToDateSliceAmount
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPayroll_l10n_fr.py", line 80, in stepCheckYearToDateSliceAmount
self.stepTic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1104, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 747, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_756c357112d36e1c818145009fbf6fa4/accounting_module/1', 'Delivery_updateAppliedRule', -2, 5), ('/erp5_portal_756c357112d36e1c818145009fbf6fa4/accounting_module/2', 'Delivery_updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_invoice_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 295, in __call__
Module Shared.DC.Scripts.Bindings, line 311, in __call__
Module Shared.DC.Scripts.Bindings, line 348, in _bindAndExec
Module Products.ERP5Type.tests.ERP5TypeTestCase, line 1299, in _exec
Module Products.PythonScripts.PythonScript, line 325, in _exec
Module None, line 45, in Delivery_updateAppliedRule
- <PythonScript at /erp5_portal_756c357112d36e1c818145009fbf6fa4/Delivery_updateAppliedRule used for /erp5_portal_756c357112d36e1c818145009fbf6fa4/accounting_module/1>
- Line 45
Module AccessControl.ZopeGuards, line 339, in guarded_apply
Module AccessControl.ZopeGuards, line 361, in builtin_guarded_apply
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 726, in updateAppliedRule
ValueError: No such rule as 'default_invoice_rule' is found
FAIL: testSkinSelectionTemplateField (testProxyField.TestProxyField)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Form/tests/testProxyField.py", line 199, in testSkinSelectionTemplateField
self.assertEquals('Customized Title', field.get_value('title'))
AssertionError: 'Customized Title' != 'Generic Title'
FAIL: test checking if the field values are of the proper type.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/Formulator/tests/testSerializeForm.py", line 358, in test_fieldValueTypes
self.assertEquals(field.values, field2.values)
AssertionError: {'alternate_name': '', 'title': 'Test Title', 'date_separator': '', 'editable': 0, 'input_order': 'mdy', 'start_datetime': None, 'description': '', 'default_now': 0, 'allow_empty_time': 0, 'ampm_time_style': 0, 'hide_day': 0, 'date_only': 0, 'time_separator': '$', 'hidden': 0, 'default': None, 'css_class': 'test_css', 'required': 1, 'enabled': 1, 'input_style': 'list', 'external_validator': '', 'hidden_day_is_last_day': 0, 'end_datetime': None, 'timezone_style': 0} != {'alternate_name': '', 'title': 'Test Title', 'date_separator': '', 'editable': 0, 'input_order': 'mdy', 'start_datetime': '', 'description': '', 'default_now': 0, 'allow_empty_time': 0, 'ampm_time_style': 0, 'hide_day': 0, 'date_only': 0, 'time_separator': '$', 'hidden': 0, 'default': '', 'css_class': 'test_css', 'required': 1, 'enabled': 1, 'input_style': 'list', 'external_validator': '', 'hidden_day_is_last_day': 0, 'end_datetime': '', 'timezone_style': 0}
FAIL: test_NonDeliveryTemplateNotIndexable (testTemplate.TestTemplate)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testTemplate.py", line 345, in test_NonDeliveryTemplateNotIndexable
self._testTemplateNotIndexable(document)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testTemplate.py", line 315, in _testTemplateNotIndexable
self.assertEquals(0, len(self.portal.portal_catalog(uid=template.getUid())))
AssertionError: 0 != 1
FAIL: test_manyTemplatesWithoutReindexation (testTemplate.TestTemplate), Check what happen when templates are created one by one without reindexation
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testTemplate.py", line 279, in test_manyTemplatesWithoutReindexation
self.assertEqual(len(preference_id_list) + 1, len(new_preference_id_list))
AssertionError: 1 != 2
FAIL: test_tradeModelLineWithTargetLevelSetting (testTradeModelLine.TestTradeModelLineSale)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2612, in test_tradeModelLineWithTargetLevelSetting
self.assertEqual(8, len(amount_list))
AssertionError: 8 != 7
FAIL: test_deadProxyFields (testXHTML.TestXHTML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testXHTML.py", line 182, in test_deadProxyFields
self.fail(message)
AssertionError:
Dead proxy field list('ODT', 'ReturnedSalePackingList_view/my_reference', 'Base_viewFieldLibrary', 'my_view_mode_read_only_reference')
('Print', 'ReturnedSalePackingList_view/my_reference', 'Base_viewFieldLibrary', 'my_view_mode_read_only_reference')
('View', 'ReturnedSalePackingList_view/my_reference', 'Base_viewFieldLibrary', 'my_view_mode_read_only_reference')
FAIL: test_erp5_dms_Drawing_OOoDocument_viewAsWeb (testXHTML.TestXHTML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testXHTML.py", line 436, in testMethod
bt_name=bt_name))
AssertionError: Using w3c validator to parse the view "OOoDocument_viewAsWeb" (from erp5_dms bt) with warnings displayed :
Error: line 539 column 43 : there is no attribute "class"
Error: line 539 column 63 : there is no attribute "style"
Error: line 539 column 105 : there is no attribute "src"
Error: line 539 column 222 : there is no attribute "onload"
Error: line 539 column 244 : element "iframe" undefined
FAIL: test_erp5_dms_Presentation_OOoDocument_viewAsWeb (testXHTML.TestXHTML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testXHTML.py", line 436, in testMethod
bt_name=bt_name))
AssertionError: Using w3c validator to parse the view "OOoDocument_viewAsWeb" (from erp5_dms bt) with warnings displayed :
Error: line 539 column 43 : there is no attribute "class"
Error: line 539 column 63 : there is no attribute "style"
Error: line 539 column 105 : there is no attribute "src"
Error: line 539 column 222 : there is no attribute "onload"
Error: line 539 column 244 : element "iframe" undefined
FAIL: test_listActionInListbox (testXHTML.TestXHTML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testXHTML.py", line 265, in test_listActionInListbox
self.assertEquals(error_list, [])
AssertionError: [('erp5_pdm/Resource_viewTransformedResourceInventory/listbox', 'Resource_viewTransformedResource'), ('erp5_web_widget_library/WebSection_viewLatestDocumentListGadget/listbox', 'WebSite_viewLatestAdditionList'), ('erp5_gadget/ERP5Site_viewPersonListGadget/listbox', 'person_module/view'), ('erp5_gadget/ERP5Site_viewRssGadget/listbox', 'Rss Link Error')] != []
More information about the Erp5-report
mailing list