[Erp5-report] ERP5 r33351: 3307 Tests, 125 Errors, 65 Failures, 81 Skips
nobody at svn.erp5.org
nobody at svn.erp5.org
Thu Mar 4 08:04:17 CET 2010
Test Suite: ERP5
Revision: 33351
Result: FAIL
All tests: 3307
Failures: 65
Errors: 125
Skips: 81
The following tests failed:
testAccountingRules (21 failures)
test_03_invoiceTransactionRule_getMatchingCell (testAccountingRules.TestSaleAccountingRules), test predicates for the cells of invoice transaction rule
test_04_SimpleInvoice (testAccountingRules.TestSaleAccountingRules), Simple Invoice.
test_04b_SimpleInvoiceConfirm (testAccountingRules.TestSaleAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 lines.
test_04d_SimpleInvoiceTwoCells (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 cells.
test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestSaleAccountingRules), Add a new line then updateAppliedRule.
test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestSaleAccountingRules), Tests that editing a line updates simulation correctly
test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestSaleAccountingRules), Tests that removing a line updates simulation correctly
test_05d_SimpleInvoiceReExpandCreateCell (testAccountingRules.TestSaleAccountingRules), Tests that replacing a line by cells updates simulation correctly
test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestSaleAccountingRules), Tests that updating an applied rule many times doesn't break the
test_02_UpdateInvoiceTransactionRuleMatrix (testAccountingRules.TestPurchaseAccountingRules), test edition of matrix and rule.
test_03_invoiceTransactionRule_getMatchingCell (testAccountingRules.TestPurchaseAccountingRules), test predicates for the cells of invoice transaction rule
test_04_SimpleInvoice (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice.
test_04b_SimpleInvoiceConfirm (testAccountingRules.TestPurchaseAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 lines.
test_04d_SimpleInvoiceTwoCells (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 cells.
test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestPurchaseAccountingRules), Add a new line then updateAppliedRule.
test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestPurchaseAccountingRules), Tests that editing a line updates simulation correctly
test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestPurchaseAccountingRules), Tests that removing a line updates simulation correctly
test_05d_SimpleInvoiceReExpandCreateCell (testAccountingRules.TestPurchaseAccountingRules), Tests that replacing a line by cells updates simulation correctly
test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestPurchaseAccountingRules), Tests that updating an applied rule many times doesn't break the
testAdvancedInvoicing (1 failures, 2 errors)
test_10_ManuallyAddedMovements (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_11_ManuallyAddedMovementsManyTransactions (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_CreatingAccountingTransactionThroughInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice), test creating simple invoice and accounting transaction
testArchive (1 errors)
test_Archive (testArchive.TestArchive)
testBPMEvaluation (40 errors)
test_confirming (testBPMEvaluation.TestOrderDefaultProcess)
test_starting (testBPMEvaluation.TestPackingListDefaultProcess)
test_confirming (testBPMEvaluation.TestOrderDifferentProcess)
test_starting (testBPMEvaluation.TestPackingListDifferentProcess)
testBusinessTemplate (1 failures, 1 errors)
test_165_checkCopyBuildInstall (testBusinessTemplate.TestBusinessTemplate)
test_164_checkCopyBuild (testBusinessTemplate.TestBusinessTemplate)
testCRM (1 failures)
test_Base_getEntityListFromFromHeader (testCRM.TestCRMMailIngestion)
testConversionInSimulation (1 failures)
test_01_delivery_mode_on_sale_packing_list_and_invoice (testConversionInSimulation.TestConversionInSimulation)
testDivergenceTester (5 errors)
test_01_QuantityDivergenceTester (testDivergenceTester.TestDivergenceTester)
testDms (1 errors)
test_addContributorToDocument (testDms.TestDocument)
testDmsWithFlare (1 errors)
test_addContributorToDocument (testDmsWithFlare.TestDocumentWithFlare)
testERP5Catalog (1 errors, 4 skips)
test_48_ERP5Site_hotReindexAll (testERP5Catalog.TestERP5Catalog)
testERP5Interfaces (20 errors)
test_Products.ERP5.AggregatedAmountList_AggregatedAmountList_implements_IAmountList (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.BusinessPath_BusinessPath_implements_IBusinessPath (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.BusinessPath_BusinessPath_implements_ICategoryAccessProvider (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.Document_Document_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.EmailDocument_EmailDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.Event_Event_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.File_File_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.Image_Image_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.OOoDocument_OOoDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TextDocument_TextDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TradeCondition_TradeCondition_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TradeModelCell_TradeModelCell_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TradeModelCell_TradeModelCell_implements_IVariated (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TradeModelLine_TradeModelLine_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TradeModelLine_TradeModelLine_implements_IVariated (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TradeModelRule_TradeModelRule_implements_IRule (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TransformationRule_TransformationRule_implements_IRule (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.Transformation_Transformation_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.Transformation_Transformation_implements_IVariated (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TransformedResource_TransformedResource_implements_IVariated (testERP5Interfaces.TestERP5Interfaces)
testERP5SimulationBPMCore (15 errors)
testBPMCopyAndPaste (Products.ERP5.tests.testBPMCore.TestBPMImplementation)
test_isBuildable_OrderedDeliveredInvoiced (Products.ERP5.tests.testBPMCore.TestBPMisBuildableImplementation), Test isBuildable for ordered, delivered and invoiced sequence
test_isCompleted_OrderedDeliveredInvoiced (Products.ERP5.tests.testBPMCore.TestBPMisCompletedImplementation), Test isCompleted for ordered, delivered and invoiced sequence
test_isFrozen_OrderedDeliveredInvoiced (Products.ERP5.tests.testBPMCore.TestBPMisFrozenImplementation), Test isFrozen for ordered, delivered and invoiced sequence
testERP5TypeInterfaces (1 errors)
test_Products.ERP5Type.ConsistencyMessage_ConsistencyMessage_implements_IConsistencyMessage (testERP5TypeInterfaces.TestERP5TypeInterfaces)
testFormPrintoutAsODT (1 failures, 1 skips)
test_02_Table_07_CellFormat (testFormPrintoutAsODT.TestFormPrintoutAsODT), 7. Normal case: cell format cetting
testICal (1 failures)
test_01_renderEvent (testICal.TestICal)
testImmobilisation (1 failures)
test_19_TestAccountingBuildingAndDivergence (testImmobilisation.TestImmobilisation)
testInventoryAPI (3 failures, 3 errors)
testConvertedInventoryList (testInventoryAPI.TestUnitConversion)
testAggregatedReports (testInventoryAPI.TestUnitConversionDefinition)
testBackwardCompatibility (testInventoryAPI.TestUnitConversionBackwardCompatibility)
testResourceConvertQuantity (testInventoryAPI.TestUnitConversionDefinition)
testResourceConvertQuantityAfterGlobalChange (testInventoryAPI.TestUnitConversionDefinition)
testResourceConvertQuantityAfterInvalidation (testInventoryAPI.TestUnitConversionDefinition)
testInvoice (2 failures, 1 errors)
test_12_SplitPackingListAndAcceptInvoice (testInvoice.TestSaleInvoice)
test_delivery_mode_and_incoterm_on_invoice (testInvoice.TestSaleInvoice)
test_delivery_mode_and_incoterm_on_invoice (testInvoice.TestPurchaseInvoice)
testItem (2 errors)
test_01_ItemSimpleTest (testItem.TestItem)
test_02_ItemWithInvoice (testItem.TestItem)
testLegacyOrder (1 failures, 2 errors)
test_Order_viewAsODT_big_image (testLegacyOrder.TestOrder)
test_Order_viewAsODT_image (testLegacyOrder.TestOrder)
test_order_payment_condition_not_copied (testLegacyOrder.TestOrder)
testLegacyProductionOrder (2 errors)
test_01_testProductionSimulationExpand (testLegacyProductionOrder.TestProductionOrder)
test_09_testTransformationWithVariation (testLegacyProductionOrder.TestProductionOrder)
testMovementGroup (1 failures)
Make sure that _separate method works if argument is an empty list.
testNotificationMessageModule (4 failures)
test_safe_substitution_content (testNotificationMessageModule.TestNotificationMessageModule), Tests that 'safe' substitution is performed, unless safe_substitute is
test_substitution_content (testNotificationMessageModule.TestNotificationMessageModule), Tests that content and subject have string.Template based substitutions
test_substitution_content_and_convert (testNotificationMessageModule.TestNotificationMessageModule), Tests that substitution also works with different target format.
test_substitution_content_parameters (testNotificationMessageModule.TestNotificationMessageModule), Tests that we can pass parameters to convert to the substitution method,
testOpenOrder (2 failures)
testOpenOrderRule (testOpenOrder.TestOpenOrder)
testPeriodicityDateList (testOpenOrder.TestOpenOrder)
testOrder (1 failures)
test_order_payment_condition_not_copied (testOrder.TestOrder)
testOrderBuilder (4 errors)
test_01_simpleOrderBuilder (testOrderBuilder.TestOrderBuilder)
test_01a_simpleOrderBuilderVariatedResource (testOrderBuilder.TestOrderBuilder)
test_02_maxDelayResourceOrderBuilder (testOrderBuilder.TestOrderBuilder)
test_03_minFlowResourceOrderBuilder (testOrderBuilder.TestOrderBuilder)
testPayroll (1 failures)
test_AccountingLineGeneration (testPayroll.TestPayroll)
testProductionOrder (3 errors)
test_01_testProductionSimulationExpand (testProductionOrder.TestProductionOrder)
test_08_testTransformationWithEfficiency (testProductionOrder.TestProductionOrder)
test_09_testTransformationWithVariation (testProductionOrder.TestProductionOrder)
testProductionOrderApparel (1 errors)
test_01_testProductionSimulationExpand (testProductionOrderApparel.TestProductionOrderApparel)
testProductionPackingList (1 failures)
test_01_sourcingDelivery (testProductionPackingList.TestProductionDelivery)
testProductionPackingListApparel (1 failures)
test_01_sourcingDelivery (testProductionPackingListApparel.TestProductionDeliveryApparel)
testProxyField (1 failures)
testSkinSelectionTemplateField (testProxyField.TestProxyField)
testPurchaseOrder (1 failures)
test_order_payment_condition_not_copied (testPurchaseOrder.TestPurchaseOrder)
testResource (19 errors)
testGetPriceWithPriceCurrency (testResource.TestResource)
testGetPriceWithPriceCurrency (testResource.TestResource)
testGetPriceWithQuantityUnit (testResource.TestResource)
testQuantityPrecision (testResource.TestResource), test how to define quantity precision on resources.
test_01_getVariationBaseCategoryList (testResource.TestResource)
test_02_getVariationRangeCategoryList (testResource.TestResource)
test_03_getVariationRangeCategoryItemList (testResource.TestResource)
test_04_getVariationCategoryList (testResource.TestResource)
test_05_getVariationCategoryList (testResource.TestResource)
test_06_getVariationCategoryItemList (testResource.TestResource)
test_07_getVariationCategoryItemList (testResource.TestResource)
test_08_variationPropertyList (testResource.TestResource)
test_09_getPrice (testResource.TestResource)
test_10_getPriceWithOptions (testResource.TestResource)
test_11_getPriceWithDestinationSection (testResource.TestResource)
test_11b_getPriceWithCells (testResource.TestResource)
test_12_getInternalVsPurchaseVsSalePrice (testResource.TestResource)
test_defaultSupplyLineAfterClone (testResource.TestResource), Check that default supply line is properly set up after clone
test_sourceDestinationReferenceOnSupplyLineOnDefaultSupplyLine (testResource.TestResource), Check that it's possible to set and get a source/destination_reference
testSerializeForm (1 failures)
test checking if the field values are of the proper type.
testTaxLineTradeCondition (6 failures)
test_tax_line_build_accounting (testTaxLineTradeCondition.TestTaxLineOrderSimulationSaleOrder)
test_tax_line_simulation (testTaxLineTradeCondition.TestTaxLineOrderSimulationSaleOrder)
test_tax_line_build_accounting (testTaxLineTradeCondition.TestTaxLineOrderSimulationPurchaseOrder)
test_tax_line_simulation (testTaxLineTradeCondition.TestTaxLineOrderSimulationPurchaseOrder)
test_tax_line_simulation (testTaxLineTradeCondition.TestTaxLineInvoiceSimulationPurchaseInvoice)
test_tax_line_simulation (testTaxLineTradeCondition.TestTaxLineInvoiceSimulationSaleInvoice)
testTemplate (2 failures)
test_NonDeliveryTemplateNotIndexable (testTemplate.TestTemplate)
test_manyTemplatesWithoutReindexation (testTemplate.TestTemplate), Check what happen when templates are created one by one without reindexation
testTradeModelLine (2 failures)
test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving (testTradeModelLine.TestTradeModelLineSale), Check that after changing invoice line invoice is properly diverged and it is possible to solve
test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio (testTradeModelLine.TestTradeModelLineSale), Check building invoice after splitting packing list using different ratio
testTradeModelLinePurchase (2 failures)
test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check that after changing invoice line invoice is properly diverged and it is possible to solve
test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check building invoice after splitting packing list using different ratio
testXHTML (5 failures)
test_configurationOfFieldLibrary (testXHTML.TestXHTML)
test_deadProxyFields (testXHTML.TestXHTML)
test_erp5_dms_Drawing_OOoDocument_viewAsWeb (testXHTML.TestXHTML)
test_erp5_dms_Presentation_OOoDocument_viewAsWeb (testXHTML.TestXHTML)
test_listActionInListbox (testXHTML.TestXHTML)
The following tests were at least partly skipped:
testBase (3 skips)
testERP5Simulation (61 skips)
testMRP (4 skips)
testSQLCachedWorklist (1 skips)
testSelectionTool (7 skips)
-------------- next part --------------
FAIL: test_03_invoiceTransactionRule_getMatchingCell (testAccountingRules.TestSaleAccountingRules), test predicates for the cells of invoice transaction rule
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1691, in test_03_invoiceTransactionRule_getMatchingCell
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
Tic
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
> CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateProducts
Tic
CreateDummyInvoice
CreateMatchableInvoiceMovements
CheckMatchableInvoiceMovements
CreateNotMatchableInvoiceMovements
CheckNotMatchableInvoiceMovements
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 512, in stepCreatePaymentRule
self.assertEquals(len(payment_rule.objectValues()), 1)
AssertionError: 2 != 1
FAIL: test_04_SimpleInvoice (testAccountingRules.TestSaleAccountingRules), Simple Invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1722, in test_04_SimpleInvoice
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
> CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
PlanInvoice
Tic
CheckFirstRuleIsApplied
CheckPaymentRuleIsApplied
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCoherantWithSimulation
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 512, in stepCreatePaymentRule
self.assertEquals(len(payment_rule.objectValues()), 1)
AssertionError: 2 != 1
FAIL: test_04b_SimpleInvoiceConfirm (testAccountingRules.TestSaleAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1761, in test_04b_SimpleInvoiceConfirm
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
> CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 512, in stepCreatePaymentRule
self.assertEquals(len(payment_rule.objectValues()), 1)
AssertionError: 2 != 1
FAIL: test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 lines.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1798, in test_04c_SimpleInvoiceTwoLines
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
> CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoiceTwoLines
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 512, in stepCreatePaymentRule
self.assertEquals(len(payment_rule.objectValues()), 1)
AssertionError: 2 != 1
FAIL: test_04d_SimpleInvoiceTwoCells (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 cells.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1835, in test_04d_SimpleInvoiceTwoCells
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
> CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoiceTwoCells
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 512, in stepCreatePaymentRule
self.assertEquals(len(payment_rule.objectValues()), 1)
AssertionError: 2 != 1
FAIL: test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestSaleAccountingRules), Add a new line then updateAppliedRule.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1875, in test_05a_SimpleInvoiceReExpandAddLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
> CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateEmptyInvoice
PlanInvoice
Tic
AddInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 512, in stepCreatePaymentRule
self.assertEquals(len(payment_rule.objectValues()), 1)
AssertionError: 2 != 1
FAIL: test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestSaleAccountingRules), Tests that editing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1913, in test_05b_SimpleInvoiceReExpandEditLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
> CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateOtherSimpleInvoice
PlanInvoice
Tic
EditInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 512, in stepCreatePaymentRule
self.assertEquals(len(payment_rule.objectValues()), 1)
AssertionError: 2 != 1
FAIL: test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestSaleAccountingRules), Tests that removing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1951, in test_05c_SimpleInvoiceReExpandDeleteLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
> CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
AddInvoiceLine
PlanInvoice
Tic
DeleteInvoiceLine
Tic
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 512, in stepCreatePaymentRule
self.assertEquals(len(payment_rule.objectValues()), 1)
AssertionError: 2 != 1
FAIL: test_05d_SimpleInvoiceReExpandCreateCell (testAccountingRules.TestSaleAccountingRules), Tests that replacing a line by cells updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1991, in test_05d_SimpleInvoiceReExpandCreateCell
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
> CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateOtherSimpleInvoice
PlanInvoice
Tic
AddCellsInInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 512, in stepCreatePaymentRule
self.assertEquals(len(payment_rule.objectValues()), 1)
AssertionError: 2 != 1
FAIL: test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestSaleAccountingRules), Tests that updating an applied rule many times doesn't break the
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2060, in test_05e_SimpleInvoiceExpandManyTimes
""", quiet=quiet )
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
> CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
PlanInvoice
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 512, in stepCreatePaymentRule
self.assertEquals(len(payment_rule.objectValues()), 1)
AssertionError: 2 != 1
FAIL: test_02_UpdateInvoiceTransactionRuleMatrix (testAccountingRules.TestPurchaseAccountingRules), test edition of matrix and rule.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1666, in test_02_UpdateInvoiceTransactionRuleMatrix
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
> CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
Tic
CheckAddPredicate
Tic
CheckRemovePredicate
Tic
CheckRestoreOriginalPredicates
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 512, in stepCreatePaymentRule
self.assertEquals(len(payment_rule.objectValues()), 1)
AssertionError: 2 != 1
FAIL: test_03_invoiceTransactionRule_getMatchingCell (testAccountingRules.TestPurchaseAccountingRules), test predicates for the cells of invoice transaction rule
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1691, in test_03_invoiceTransactionRule_getMatchingCell
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
Tic
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
> CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateProducts
Tic
CreateDummyInvoice
CreateMatchableInvoiceMovements
CheckMatchableInvoiceMovements
CreateNotMatchableInvoiceMovements
CheckNotMatchableInvoiceMovements
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 512, in stepCreatePaymentRule
self.assertEquals(len(payment_rule.objectValues()), 1)
AssertionError: 2 != 1
FAIL: test_04_SimpleInvoice (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1722, in test_04_SimpleInvoice
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
> CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
PlanInvoice
Tic
CheckFirstRuleIsApplied
CheckPaymentRuleIsApplied
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCoherantWithSimulation
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 512, in stepCreatePaymentRule
self.assertEquals(len(payment_rule.objectValues()), 1)
AssertionError: 2 != 1
FAIL: test_04b_SimpleInvoiceConfirm (testAccountingRules.TestPurchaseAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1761, in test_04b_SimpleInvoiceConfirm
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
> CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 512, in stepCreatePaymentRule
self.assertEquals(len(payment_rule.objectValues()), 1)
AssertionError: 2 != 1
FAIL: test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 lines.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1798, in test_04c_SimpleInvoiceTwoLines
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
> CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoiceTwoLines
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 512, in stepCreatePaymentRule
self.assertEquals(len(payment_rule.objectValues()), 1)
AssertionError: 2 != 1
FAIL: test_04d_SimpleInvoiceTwoCells (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 cells.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1835, in test_04d_SimpleInvoiceTwoCells
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
> CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoiceTwoCells
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 512, in stepCreatePaymentRule
self.assertEquals(len(payment_rule.objectValues()), 1)
AssertionError: 2 != 1
FAIL: test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestPurchaseAccountingRules), Add a new line then updateAppliedRule.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1875, in test_05a_SimpleInvoiceReExpandAddLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
> CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateEmptyInvoice
PlanInvoice
Tic
AddInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 512, in stepCreatePaymentRule
self.assertEquals(len(payment_rule.objectValues()), 1)
AssertionError: 2 != 1
FAIL: test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestPurchaseAccountingRules), Tests that editing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1913, in test_05b_SimpleInvoiceReExpandEditLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
> CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateOtherSimpleInvoice
PlanInvoice
Tic
EditInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 512, in stepCreatePaymentRule
self.assertEquals(len(payment_rule.objectValues()), 1)
AssertionError: 2 != 1
FAIL: test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestPurchaseAccountingRules), Tests that removing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1951, in test_05c_SimpleInvoiceReExpandDeleteLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
> CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
AddInvoiceLine
PlanInvoice
Tic
DeleteInvoiceLine
Tic
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 512, in stepCreatePaymentRule
self.assertEquals(len(payment_rule.objectValues()), 1)
AssertionError: 2 != 1
FAIL: test_05d_SimpleInvoiceReExpandCreateCell (testAccountingRules.TestPurchaseAccountingRules), Tests that replacing a line by cells updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1991, in test_05d_SimpleInvoiceReExpandCreateCell
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
> CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateOtherSimpleInvoice
PlanInvoice
Tic
AddCellsInInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 512, in stepCreatePaymentRule
self.assertEquals(len(payment_rule.objectValues()), 1)
AssertionError: 2 != 1
FAIL: test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestPurchaseAccountingRules), Tests that updating an applied rule many times doesn't break the
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2060, in test_05e_SimpleInvoiceExpandManyTimes
""", quiet=quiet )
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
> CreatePaymentRule
UpdatePaymentRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
PlanInvoice
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
CheckPaymentLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 512, in stepCreatePaymentRule
self.assertEquals(len(payment_rule.objectValues()), 1)
AssertionError: 2 != 1
ERROR: test_10_ManuallyAddedMovements (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 928, in test_10_ManuallyAddedMovements
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
StartInvoice
Tic
> AddInvoiceTransactionLines
Tic
CheckSimulationTrees
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 150, in stepAddInvoiceTransactionLines
invoice_transaction.newContent(portal_type=self.invoice_transaction_line_portal_type,
AttributeError: 'NoneType' object has no attribute 'newContent'
ERROR: test_11_ManuallyAddedMovementsManyTransactions (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 962, in test_11_ManuallyAddedMovementsManyTransactions
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
Tic
CheckInvoiceIsSolved
StartInvoice
Tic
> AddInvoiceLinesManyTransactions
Tic
CheckSimulationTrees
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 167, in stepAddInvoiceLinesManyTransactions
transaction_line_1 = invoice_transaction.newContent(portal_type=self.invoice_transaction_line_portal_type)
AttributeError: 'NoneType' object has no attribute 'newContent'
FAIL: test_CreatingAccountingTransactionThroughInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice), test creating simple invoice and accounting transaction
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 273, in test_CreatingAccountingTransactionThroughInvoice
self.assertNotEquals(invoice_transaction, None)
AssertionError: None == None
ERROR: test_Archive (testArchive.TestArchive)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Catalog/tests/testArchive.py", line 243, in test_Archive
clear_archive_sql_catalog=True)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Catalog/Tool/ArchiveTool.py", line 195, in manage_archive
portal_catalog.manage_catalogClear(sql_catalog_id=destination_sql_catalog_id)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ZSQLCatalog/ZSQLCatalog.py", line 610, in manage_catalogClear
catalog.manage_catalogClear(REQUEST=REQUEST, RESPONSE=RESPONSE, URL1=URL1)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ZSQLCatalog/SQLCatalog.py", line 1188, in manage_catalogClear
self.clear()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ZSQLCatalog/SQLCatalog.py", line 802, in clear
method()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/patches/DA.py", line 220, in DA__call__
result=DB__.query(query, self.max_rows_)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ZMySQLDA/db.py", line 295, in query
return self._access_db(method_id='query', args=args, kw=kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ZMySQLDA/db.py", line 286, in _access_db
return getattr(db, method_id)(*args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ZMySQLDA/db.py", line 441, in query
c = self._query(qs)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ZMySQLDA/db.py", line 393, in _query
self.db.query(query)
OperationalError: (1050, "Table 'transformation' already exists")
ERROR: test_confirming (testBPMEvaluation.TestOrderDefaultProcess)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 516, in setUp
erp5_catalog_storage=erp5_catalog_storage)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1005, in setUpERP5Site
self.tic(not quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_5d716c545df20605f23c5fecf31da9f3/portal_rules/default_invoice_transaction_simulation_rule', 'updateMatrix', -2, 5)]
Last error message:
TypeError
'NoneType' object is not callable
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 295, in __call__
Module Products.ERP5.Document.PredicateMatrix, line 82, in updateMatrix
Module Products.ERP5Type.XMLMatrix, line 312, in _updateCellRange
TypeError: 'NoneType' object is not callable
ERROR: test_starting (testBPMEvaluation.TestPackingListDefaultProcess)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 516, in setUp
erp5_catalog_storage=erp5_catalog_storage)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1005, in setUpERP5Site
self.tic(not quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_5d716c545df20605f23c5fecf31da9f3/portal_rules/default_invoice_transaction_simulation_rule', 'updateMatrix', -2, 5), ('/erp5_portal_56cd7183f1b386326d005e1f29f82e6a/portal_rules/default_invoice_transaction_simulation_rule', 'updateMatrix', -2, 5)]
Last error message:
TypeError
'NoneType' object is not callable
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 295, in __call__
Module Products.ERP5.Document.PredicateMatrix, line 82, in updateMatrix
Module Products.ERP5Type.XMLMatrix, line 312, in _updateCellRange
TypeError: 'NoneType' object is not callable
ERROR: test_confirming (testBPMEvaluation.TestOrderDifferentProcess)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 516, in setUp
erp5_catalog_storage=erp5_catalog_storage)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1005, in setUpERP5Site
self.tic(not quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_5d716c545df20605f23c5fecf31da9f3/portal_rules/default_invoice_transaction_simulation_rule', 'updateMatrix', -2, 5), ('/erp5_portal_56cd7183f1b386326d005e1f29f82e6a/portal_rules/default_invoice_transaction_simulation_rule', 'updateMatrix', -2, 5), ('/erp5_portal_ee59835765ba83d4705024d7e45dc104/portal_rules/default_invoice_transaction_simulation_rule', 'updateMatrix', -2, 5)]
Last error message:
TypeError
'NoneType' object is not callable
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 295, in __call__
Module Products.ERP5.Document.PredicateMatrix, line 82, in updateMatrix
Module Products.ERP5Type.XMLMatrix, line 312, in _updateCellRange
TypeError: 'NoneType' object is not callable
ERROR: test_starting (testBPMEvaluation.TestPackingListDifferentProcess)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 516, in setUp
erp5_catalog_storage=erp5_catalog_storage)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1005, in setUpERP5Site
self.tic(not quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_5d716c545df20605f23c5fecf31da9f3/portal_rules/default_invoice_transaction_simulation_rule', 'updateMatrix', -2, 5), ('/erp5_portal_56cd7183f1b386326d005e1f29f82e6a/portal_rules/default_invoice_transaction_simulation_rule', 'updateMatrix', -2, 5), ('/erp5_portal_ee59835765ba83d4705024d7e45dc104/portal_rules/default_invoice_transaction_simulation_rule', 'updateMatrix', -2, 5), ('/erp5_portal_17360a7d4ba0a50bb5163f3482d3ff9b/portal_rules/default_invoice_transaction_simulation_rule', 'updateMatrix', -2, 5)]
Last error message:
TypeError
'NoneType' object is not callable
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 295, in __call__
Module Products.ERP5.Document.PredicateMatrix, line 82, in updateMatrix
Module Products.ERP5Type.XMLMatrix, line 312, in _updateCellRange
TypeError: 'NoneType' object is not callable
ERROR: test_165_checkCopyBuildInstall (testBusinessTemplate.TestBusinessTemplate)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 5974, in test_165_checkCopyBuildInstall
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
UseCoreBusinessTemplate
CopyCoreBusinessTemplate
BuildCopyCoreBusinessTemplate
> InstallCopyCoreBusinessTemplate
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 219, in stepInstallCopyCoreBusinessTemplate
bt.install()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/Base.py", line 237, in __call__
result = apply(self.__dict__['_m'], (instance,) + args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 5206, in install
return self._install(**kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 5142, in _install
trashbin=trashbin, installed_bt=installed_bt)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 1831, in install
for wf_id in self._objects[path].split(', '):
AttributeError: 'list' object has no attribute 'split'
FAIL: test_164_checkCopyBuild (testBusinessTemplate.TestBusinessTemplate)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 5958, in test_164_checkCopyBuild
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
UseCoreBusinessTemplate
CopyCoreBusinessTemplate
BuildCopyCoreBusinessTemplate
> CheckOriginalAndCopyBusinessTemplate
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 233, in stepCheckOriginalAndCopyBusinessTemplate
self.assertEquals(original_obj.getKeys(), copy_obj.getKeys())
AssertionError: ['StandardSecurity', 'DocumentExtraction'] != ['ExtensionTemplateItem/StandardSecurity', 'ExtensionTemplateItem/DocumentExtraction']
FAIL: test_Base_getEntityListFromFromHeader (testCRM.TestCRMMailIngestion)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testCRM.py", line 452, in test_Base_getEntityListFromFromHeader
'%r should return %r, but returned %r' %
AssertionError: '"me at erp5.org,sender at customer.com," <he at erp5.org>' should return ['person_module/he'], but returned ['person_module/sender', 'person_module/he']
FAIL: test_01_delivery_mode_on_sale_packing_list_and_invoice (testConversionInSimulation.TestConversionInSimulation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testConversionInSimulation.py", line 775, in test_01_delivery_mode_on_sale_packing_list_and_invoice
order.getDeliveryMode())
AssertionError: None != 'by_mail'
ERROR: test_01_QuantityDivergenceTester (testDivergenceTester.TestDivergenceTester)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 516, in setUp
erp5_catalog_storage=erp5_catalog_storage)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 994, in setUpERP5Site
setup_once()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testDivergenceTester.py", line 92, in setUpOnce
self.bootstrapSite()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testDivergenceTester.py", line 83, in bootstrapSite
sequence_list.play(self, quiet=self.quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
> RemoveDivergenceTesters
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateOrder
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
ConfirmOrder
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testDivergenceTester.py", line 54, in stepRemoveDivergenceTesters
rule.manage_delObjects(
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/CopySupport.py", line 224, in manage_delObjects
ob=self.getPortalObject().portal_catalog.getObject(uid)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ZSQLCatalog/ZSQLCatalog.py", line 948, in getobject
path = self.getpath(uid, sql_catalog_id=sql_catalog_id)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ZSQLCatalog/ZSQLCatalog.py", line 926, in getpath
object = catalog[uid]
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ZSQLCatalog/SQLCatalog.py", line 860, in __getitem__
raise KeyError, uid
KeyError: 10L
ERROR: test_addContributorToDocument (testDms.TestDocument)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1378, in test_addContributorToDocument
person1 = self.createUser(reference='user1')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 754, in createUser
password=password,
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/Core/Folder.py", line 455, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/Core/Folder.py", line 169, in newContent
if kw != {} : new_instance._edit(force_update=1, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/Base.py", line 1702, in _edit
unmodified_key_list = setChangedPropertyList(unordered_key_list)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/Base.py", line 1686, in setChangedPropertyList
modified_object_list = self._setProperty(key, kw[key])
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/Base.py", line 205, in __call__
return apply(self.__dict__['_m'], (instance,) + args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/Base.py", line 1467, in _setProperty
return method(value, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/Document/Person.py", line 193, in setReference
raise RuntimeError, 'user id %s already exist' % (value,)
RuntimeError: user id user1 already exist
ERROR: test_addContributorToDocument (testDmsWithFlare.TestDocumentWithFlare)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5OOo/tests/testDms.py", line 1378, in test_addContributorToDocument
person1 = self.createUser(reference='user1')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 754, in createUser
password=password,
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 455, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 169, in newContent
if kw != {} : new_instance._edit(force_update=1, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Base.py", line 1702, in _edit
unmodified_key_list = setChangedPropertyList(unordered_key_list)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Base.py", line 1686, in setChangedPropertyList
modified_object_list = self._setProperty(key, kw[key])
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Base.py", line 205, in __call__
return apply(self.__dict__['_m'], (instance,) + args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Base.py", line 1467, in _setProperty
return method(value, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/Document/Person.py", line 193, in setReference
raise RuntimeError, 'user id %s already exist' % (value,)
RuntimeError: user id user1 already exist
ERROR: test_48_ERP5Site_hotReindexAll (testERP5Catalog.TestERP5Catalog)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Catalog/tests/testERP5Catalog.py", line 1543, in test_48_ERP5Site_hotReindexAll
update_destination_sql_catalog=True)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ZSQLCatalog/ZSQLCatalog.py", line 520, in manage_hotReindexAll
passive_commit=1)
File "/usr/lib/erp5/lib/python/Shared/DC/Scripts/Bindings.py", line 311, in __call__
return self._bindAndExec(args, kw, None)
File "/usr/lib/erp5/lib/python/Shared/DC/Scripts/Bindings.py", line 348, in _bindAndExec
return self._exec(bound_data, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1269, in _exec
return PythonScript_exec(self, *args)
File "/usr/lib/erp5/lib/python/Products/PythonScripts/PythonScript.py", line 325, in _exec
result = f(*args, **kw)
File "Script (Python)", line 5, in ERP5Site_reindexAll
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ZSQLCatalog/SQLCatalog.py", line 1188, in manage_catalogClear
self.clear()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ZSQLCatalog/SQLCatalog.py", line 802, in clear
method()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/patches/DA.py", line 220, in DA__call__
result=DB__.query(query, self.max_rows_)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ZMySQLDA/db.py", line 295, in query
return self._access_db(method_id='query', args=args, kw=kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ZMySQLDA/db.py", line 286, in _access_db
return getattr(db, method_id)(*args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ZMySQLDA/db.py", line 441, in query
c = self._query(qs)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ZMySQLDA/db.py", line 393, in _query
self.db.query(query)
OperationalError: (1050, "Table 'transformation' already exists")
ERROR: test_Products.ERP5.AggregatedAmountList_AggregatedAmountList_implements_IAmountList (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IAmountList.IAmountList>
ERROR: test_Products.ERP5Type.Document.BusinessPath_BusinessPath_implements_IBusinessPath (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IBusinessPath.IBusinessPath>
The getExpectedCompletionDuration attribute was not provided.
ERROR: test_Products.ERP5Type.Document.BusinessPath_BusinessPath_implements_ICategoryAccessProvider (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 85, in _verify
raise BrokenMethodImplementation(n, mess)
BrokenMethodImplementation: The implementation of _getAcquiredCategoryMembershipList violates its contract
because implementation doesn't allow enough arguments.
ERROR: test_Products.ERP5Type.Document.Document_Document_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>
ERROR: test_Products.ERP5Type.Document.EmailDocument_EmailDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>
ERROR: test_Products.ERP5Type.Document.Event_Event_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>
ERROR: test_Products.ERP5Type.Document.File_File_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>
ERROR: test_Products.ERP5Type.Document.Image_Image_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>
ERROR: test_Products.ERP5Type.Document.OOoDocument_OOoDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>
ERROR: test_Products.ERP5Type.Document.TextDocument_TextDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>
ERROR: test_Products.ERP5Type.Document.TradeCondition_TradeCondition_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IAmountGenerator.IAmountGenerator>
The getGeneratedAmountList attribute was not provided.
ERROR: test_Products.ERP5Type.Document.TradeModelCell_TradeModelCell_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IAmountGenerator.IAmountGenerator>
The getGeneratedAmountList attribute was not provided.
ERROR: test_Products.ERP5Type.Document.TradeModelCell_TradeModelCell_implements_IVariated (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 85, in _verify
raise BrokenMethodImplementation(n, mess)
BrokenMethodImplementation: The implementation of setVariationCategoryList violates its contract
because implementation doesn't allow enough arguments.
ERROR: test_Products.ERP5Type.Document.TradeModelLine_TradeModelLine_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IAmountGenerator.IAmountGenerator>
The getGeneratedAmountList attribute was not provided.
ERROR: test_Products.ERP5Type.Document.TradeModelLine_TradeModelLine_implements_IVariated (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 85, in _verify
raise BrokenMethodImplementation(n, mess)
BrokenMethodImplementation: The implementation of setVariationCategoryList violates its contract
because implementation doesn't allow enough arguments.
ERROR: test_Products.ERP5Type.Document.TradeModelRule_TradeModelRule_implements_IRule (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IRule.IRule>
The updateMovementCollection attribute was not provided.
ERROR: test_Products.ERP5Type.Document.TransformationRule_TransformationRule_implements_IRule (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IRule.IRule>
The updateMovementCollection attribute was not provided.
ERROR: test_Products.ERP5Type.Document.Transformation_Transformation_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IAmountGenerator.IAmountGenerator>
The getGeneratedAmountList attribute was not provided.
ERROR: test_Products.ERP5Type.Document.Transformation_Transformation_implements_IVariated (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 85, in _verify
raise BrokenMethodImplementation(n, mess)
BrokenMethodImplementation: The implementation of getVariationRangeCategoryItemList violates its contract
because implementation doesn't allow enough arguments.
ERROR: test_Products.ERP5Type.Document.TransformedResource_TransformedResource_implements_IVariated (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 85, in _verify
raise BrokenMethodImplementation(n, mess)
BrokenMethodImplementation: The implementation of setVariationCategoryList violates its contract
because implementation doesn't allow enough arguments.
ERROR: testBPMCopyAndPaste (Products.ERP5.tests.testBPMCore.TestBPMImplementation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 516, in setUp
erp5_catalog_storage=erp5_catalog_storage)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1005, in setUpERP5Site
self.tic(not quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_3ca444db9340e33ca90c2ef0e137d2e3/portal_rules/default_invoice_transaction_simulation_rule', 'updateMatrix', -2, 5)]
Last error message:
TypeError
'NoneType' object is not callable
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 295, in __call__
Module Products.ERP5.Document.PredicateMatrix, line 82, in updateMatrix
Module Products.ERP5Type.XMLMatrix, line 312, in _updateCellRange
TypeError: 'NoneType' object is not callable
ERROR: test_isBuildable_OrderedDeliveredInvoiced (Products.ERP5.tests.testBPMCore.TestBPMisBuildableImplementation), Test isBuildable for ordered, delivered and invoiced sequence
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 516, in setUp
erp5_catalog_storage=erp5_catalog_storage)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1005, in setUpERP5Site
self.tic(not quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_3ca444db9340e33ca90c2ef0e137d2e3/portal_rules/default_invoice_transaction_simulation_rule', 'updateMatrix', -2, 5), ('/erp5_portal_e961b6bee3a7eb24bac909c991d60541/portal_rules/default_invoice_transaction_simulation_rule', 'updateMatrix', -2, 5)]
Last error message:
TypeError
'NoneType' object is not callable
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 295, in __call__
Module Products.ERP5.Document.PredicateMatrix, line 82, in updateMatrix
Module Products.ERP5Type.XMLMatrix, line 312, in _updateCellRange
TypeError: 'NoneType' object is not callable
ERROR: test_isCompleted_OrderedDeliveredInvoiced (Products.ERP5.tests.testBPMCore.TestBPMisCompletedImplementation), Test isCompleted for ordered, delivered and invoiced sequence
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 516, in setUp
erp5_catalog_storage=erp5_catalog_storage)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1005, in setUpERP5Site
self.tic(not quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_3ca444db9340e33ca90c2ef0e137d2e3/portal_rules/default_invoice_transaction_simulation_rule', 'updateMatrix', -2, 5), ('/erp5_portal_e961b6bee3a7eb24bac909c991d60541/portal_rules/default_invoice_transaction_simulation_rule', 'updateMatrix', -2, 5), ('/erp5_portal_0ff8637fef03617b5fc29798ecd3143c/portal_rules/default_invoice_transaction_simulation_rule', 'updateMatrix', -2, 5)]
Last error message:
TypeError
'NoneType' object is not callable
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 295, in __call__
Module Products.ERP5.Document.PredicateMatrix, line 82, in updateMatrix
Module Products.ERP5Type.XMLMatrix, line 312, in _updateCellRange
TypeError: 'NoneType' object is not callable
ERROR: test_isFrozen_OrderedDeliveredInvoiced (Products.ERP5.tests.testBPMCore.TestBPMisFrozenImplementation), Test isFrozen for ordered, delivered and invoiced sequence
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 516, in setUp
erp5_catalog_storage=erp5_catalog_storage)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1005, in setUpERP5Site
self.tic(not quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_3ca444db9340e33ca90c2ef0e137d2e3/portal_rules/default_invoice_transaction_simulation_rule', 'updateMatrix', -2, 5), ('/erp5_portal_e961b6bee3a7eb24bac909c991d60541/portal_rules/default_invoice_transaction_simulation_rule', 'updateMatrix', -2, 5), ('/erp5_portal_0ff8637fef03617b5fc29798ecd3143c/portal_rules/default_invoice_transaction_simulation_rule', 'updateMatrix', -2, 5), ('/erp5_portal_ce73648d29694517827d085481a6b3f2/portal_rules/default_invoice_transaction_simulation_rule', 'updateMatrix', -2, 5)]
Last error message:
TypeError
'NoneType' object is not callable
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 295, in __call__
Module Products.ERP5.Document.PredicateMatrix, line 82, in updateMatrix
Module Products.ERP5Type.XMLMatrix, line 312, in _updateCellRange
TypeError: 'NoneType' object is not callable
ERROR: test_Products.ERP5Type.ConsistencyMessage_ConsistencyMessage_implements_IConsistencyMessage (testERP5TypeInterfaces.TestERP5TypeInterfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass Products.ERP5Type.interfaces.consistency_message.IConsistencyMessage>
The fix attribute was not provided.
FAIL: test_02_Table_07_CellFormat (testFormPrintoutAsODT.TestFormPrintoutAsODT), 7. Normal case: cell format cetting
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5OOo/tests/testFormPrintoutAsODT.py", line 633, in test_02_Table_07_CellFormat
self.assertEqual(date_column.attrib[date_value_attrib], '2009-04-20')
AssertionError: '2009-04-19' != '2009-04-20'
FAIL: test_01_renderEvent (testICal.TestICal)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testICal.py", line 151, in test_01_renderEvent
self.assertEquals( # if this fail for you, try to set $TZ to Europe/Paris
AssertionError: '20070815T143000Z' != '20070815T083000Z'
FAIL: test_19_TestAccountingBuildingAndDivergence (testImmobilisation.TestImmobilisation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testImmobilisation.py", line 3683, in test_19_TestAccountingBuildingAndDivergence
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
SetTest19SequenceData
DeleteAccounting
Tic
DeleteAllPackingLists
Tic
TestAllAppliedRulesAreEmpty
CreatePackingList
DeliverPackingList
AggregateItems
Tic
BuildAccounting
Tic
TestSimpleAccountingBuild
SetTest19SequenceData2
CreatePackingList
DeliverPackingList
AggregateItems
Tic
TestSimulationBuildAfterFirstAccountingChange
BuildAccounting
Tic
TestAccountingBuildAfterFirstChange
DeletePackingList
Tic
TestSimulationBuildAfterSecondAccountingChange
BuildAccounting
Tic
TestAccountingBuildAfterSecondChange
AdoptPrevision
Tic
TestAccountingBuildAfterAdoptPrevision
Test19ModifyPackingList
Tic
TestSimulationBuildAfterPackingListModification
BuildAccounting
Tic
> TestAccountingBuildAfterPackingListModification
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testImmobilisation.py", line 2704, in stepTestAccountingBuildAfterPackingListModification
self._testAccountingBuild(c_transaction_list, e_transaction_list)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testImmobilisation.py", line 3025, in _testAccountingBuild
self.fail('Calculated Transaction %s not expected:\n\t source=%s\n\tdestination=%s\n\tquantity=%s\n\tquantity_sign=%s\n%s' % (
AssertionError: Calculated Transaction accounting_module/16/8 not expected:
source=account_module/account10
destination=None
quantity=0.0
quantity_sign=1.0
[{'source': 'account_module/account10', 'destination': None, 'quantity': 2500}]
ERROR: testConvertedInventoryList (testInventoryAPI.TestUnitConversion)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInventoryAPI.py", line 2443, in testConvertedInventoryList
self.makeMovement(2, self.resource, 'colour/green', 'size/big')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInventoryAPI.py", line 2354, in makeMovement
source_value=self.node, destination_value=self.mirror_node, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/utils.py", line 268, in __call__
self._instance.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/inventory_api_test/product_module/204', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/205', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/205/1', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/205/2', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/205/3', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/205/4', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/205/5', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/205/6', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/205/7', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/205/8', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/204/1', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/204/2', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/204/2/1', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/204/2/2', 'immediateReindexObject', -2, 5)]
Last error message:
KeyError
'quantity_unit'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1229, in invokeGroup
Module Products.ZSQLCatalog.ZSQLCatalog, line 835, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1271, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1502, in _catalogObjectList
Module Products.ERP5Type.patches.DA, line 199, in DA__call__
- <SQL at /inventory_api_test/portal_catalog/erp5_mysql_innodb/z_catalog_quantity_unit_conversion_list>
Module DocumentTemplate.DT_String, line 476, in __call__
Module DocumentTemplate.DT_Let, line 76, in render
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_Util, line 196, in eval
- __traceback_info__: quantity_unit_conversion_dict
Module <string>, line 1, in <expression>
Module AccessControl.ZopeGuards, line 67, in guarded_getitem
KeyError: 'quantity_unit'
ERROR: testAggregatedReports (testInventoryAPI.TestUnitConversionDefinition)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInventoryAPI.py", line 2533, in testAggregatedReports
self.makeMovement(-10, self.resource_bylot)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInventoryAPI.py", line 2354, in makeMovement
source_value=self.node, destination_value=self.mirror_node, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/utils.py", line 268, in __call__
self._instance.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/inventory_api_test/portal_workflow/quantity_unit_conversion_interaction_workflow', 'QuantityUnitConversionModule_invalidateUniversalDefinitionDict', -1, 0), ('/inventory_api_test/product_module/206', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/207', 'immediateReindexObject', -2, 5), ('/inventory_api_test/apparel_fabric_item_module/205', 'immediateReindexObject', -2, 5), ('/inventory_api_test/apparel_fabric_item_module/206', 'immediateReindexObject', -2, 5), ('/inventory_api_test/quantity_unit_conversion_module/unit', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module', 'recursiveImmediateReindexObject', -2, 5), ('/inventory_api_test/quantity_unit_conversion_module/unit/lot', 'immediateReindexObject', -2, 5), ('/inventory_api_test/quantity_unit_conversion_module/unit/pack', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/208', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/209', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/206', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/207', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/207/1', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/207', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/207/1/1', 'immediateReindexObject', -2, 5)]
Last error message:
KeyError
'quantity_unit'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1229, in invokeGroup
Module Products.ZSQLCatalog.ZSQLCatalog, line 835, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1271, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1502, in _catalogObjectList
Module Products.ERP5Type.patches.DA, line 199, in DA__call__
- <SQL at /inventory_api_test/portal_catalog/erp5_mysql_innodb/z_catalog_quantity_unit_conversion_list>
Module DocumentTemplate.DT_String, line 476, in __call__
Module DocumentTemplate.DT_Let, line 76, in render
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_Util, line 196, in eval
- __traceback_info__: quantity_unit_conversion_dict
Module <string>, line 1, in <expression>
Module AccessControl.ZopeGuards, line 67, in guarded_getitem
KeyError: 'quantity_unit'
ERROR: testBackwardCompatibility (testInventoryAPI.TestUnitConversionBackwardCompatibility)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInventoryAPI.py", line 2724, in testBackwardCompatibility
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/inventory_api_test/purchase_packing_list_module/1', 'updateCausalityState', -1, 0), ('/inventory_api_test/purchase_packing_list_module/1', 'Delivery_updateAppliedRule', -1, 0), ('/inventory_api_test/product_module/222', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/223', 'immediateReindexObject', -2, 5), ('/inventory_api_test/apparel_fabric_item_module/213', 'immediateReindexObject', -2, 5), ('/inventory_api_test/apparel_fabric_item_module/214', 'immediateReindexObject', -2, 5), ('/inventory_api_test/portal_categories/quantity_unit/mass/gram', 'immediateReindexObject', -2, 5), ('/inventory_api_test/portal_categories/quantity_unit/mass/kilogram', 'immediateReindexObject', -2, 5), ('/inventory_api_test/portal_rules/default_delivery_rule', 'immediateReindexObject', -2, 5), ('/inventory_api_test/product_module/224', 'immediateReindexObject', -2, 5), ('/inventory_api_test/organisation_module/659', 'immediateReindexObject', -2, 5), ('/inventory_api_test/purchase_packing_list_module/1', 'recursiveImmediateReindexObject', -2, 5), ('/inventory_api_test/purchase_packing_list_module/1/1', 'recursiveImmediateReindexObject', -2, 5), ('/inventory_api_test/purchase_packing_list_module/1/2', 'recursiveImmediateReindexObject', -2, 5), ('/inventory_api_test/purchase_packing_list_module/1', 'updateAppliedRule', -2, 5)]
Last error message:
ValueError
No such rule as 'default_delivery_rule' is found
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 295, in __call__
Module Products.ERP5Type.Document.PackingList, line 137, in updateAppliedRule
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 727, in updateAppliedRule
ValueError: No such rule as 'default_delivery_rule' is found
FAIL: testResourceConvertQuantity (testInventoryAPI.TestUnitConversionDefinition)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInventoryAPI.py", line 2561, in testResourceConvertQuantity
"unit/unit"))
AssertionError: 1000 != None
FAIL: testResourceConvertQuantityAfterGlobalChange (testInventoryAPI.TestUnitConversionDefinition)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInventoryAPI.py", line 2626, in testResourceConvertQuantityAfterGlobalChange
lot_definition = self.checkInitialStateAndGetLotDefinition()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInventoryAPI.py", line 2601, in checkInitialStateAndGetLotDefinition
"unit/unit"))
AssertionError: 1000 != None
FAIL: testResourceConvertQuantityAfterInvalidation (testInventoryAPI.TestUnitConversionDefinition)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInventoryAPI.py", line 2655, in testResourceConvertQuantityAfterInvalidation
lot_definition = self.checkInitialStateAndGetLotDefinition()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testInventoryAPI.py", line 2601, in checkInitialStateAndGetLotDefinition
"unit/unit"))
AssertionError: 1000 != None
ERROR: test_12_SplitPackingListAndAcceptInvoice (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testInvoice.py", line 3350, in test_12_SplitPackingListAndAcceptInvoice
self.playSequence(sequence, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 116, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
CheckInvoicingRule
DecreasePackingListLineQuantity
SetContainerFullQuantity
CheckPackingListIsCalculating
Tic
CheckPackingListIsDiverged
SplitAndDeferPackingList
Tic
CheckPackingListIsSolved
CheckPackingListSplitted
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
StopPackingList
Tic
DeliverPackingList
Tic
CheckPackingListIsSolved
CheckPackingListSplitted
IncreaseInvoiceLineQuantity
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
AcceptDecisionQuantityInvoice
Tic
StartInvoice
Tic
CheckPaymentBuilding
StopInvoice
Tic
DeliverInvoice
Tic
CheckInvoiceIsSolved
CheckInvoiceNotSplitted
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckInvoiceTransactionRule
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
SwitchPackingLists
AddPackingListContainer
SetContainerFullQuantity
Tic
CheckPackingListIsSolved
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
StopPackingList
Tic
DeliverPackingList
Tic
CheckPackingListIsSolved
SetInvoiceLineQuantityToZero
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
AcceptDecisionQuantityInvoice
Tic
StartInvoice
Tic
> CheckPaymentBuilding
StopInvoice
Tic
DeliverInvoice
Tic
CheckInvoiceIsSolved
CheckInvoiceNotSplitted
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckInvoiceTransactionRule
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testInvoice.py", line 713, in stepCheckPaymentBuilding
self.assertEquals(related_simulation_movement.getQuantity() /\
ZeroDivisionError: float division
FAIL: test_delivery_mode_and_incoterm_on_invoice (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2389, in test_delivery_mode_and_incoterm_on_invoice
order.getDeliveryMode())
AssertionError: None != 'by_mail'
FAIL: test_delivery_mode_and_incoterm_on_invoice (testInvoice.TestPurchaseInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2389, in test_delivery_mode_and_incoterm_on_invoice
order.getDeliveryMode())
AssertionError: None != 'by_mail'
ERROR: test_01_ItemSimpleTest (testItem.TestItem)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testItem.py", line 221, in test_01_ItemSimpleTest
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateItemList
CreateOrder
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderLineSetAggregationList
ConfirmOrder
Tic
CheckOrderLineAggregate
CheckOrderSimulation
> CheckSimulationAggregate
CheckDeliveryBuilding
CheckPackingListLineAggregate
CheckPackingListIsNotDivergent
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testItem.py", line 165, in stepCheckSimulationAggregate
self.checkAggregate(line=simulation_movement, sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testItem.py", line 184, in checkAggregate
self.assertEquals(len(line.getAggregateList()),1)
AttributeError: 'NoneType' object has no attribute 'getAggregateList'
ERROR: test_02_ItemWithInvoice (testItem.TestItem)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testItem.py", line 265, in test_02_ItemWithInvoice
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateItemList
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderLineSetAggregationList
ConfirmOrder
Tic
CheckOrderRule
CheckOrderLineAggregate
CheckOrderSimulation
> CheckSimulationAggregate
CheckDeliveryBuilding
CheckPackingListLineAggregate
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
CheckInvoiceLineAggregate
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testItem.py", line 165, in stepCheckSimulationAggregate
self.checkAggregate(line=simulation_movement, sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testItem.py", line 184, in checkAggregate
self.assertEquals(len(line.getAggregateList()),1)
AttributeError: 'NoneType' object has no attribute 'getAggregateList'
ERROR: test_Order_viewAsODT_big_image (testLegacyOrder.TestOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Legacy/tests/testLegacyOrder.py", line 2691, in test_Order_viewAsODT_big_image
'test_data', 'images', 'erp5_logo.bmp'), 'rb')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/utils.py", line 48, in __init__
file.__init__(self, path)
IOError: [Errno 2] No such file or directory: '/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Legacy/tests/test_data/images/erp5_logo.bmp'
ERROR: test_Order_viewAsODT_image (testLegacyOrder.TestOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Legacy/tests/testLegacyOrder.py", line 2655, in test_Order_viewAsODT_image
'test_data', 'images', 'erp5_logo.png'), 'rb')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/utils.py", line 48, in __init__
file.__init__(self, path)
IOError: [Errno 2] No such file or directory: '/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Legacy/tests/test_data/images/erp5_logo.png'
FAIL: test_order_payment_condition_not_copied (testLegacyOrder.TestOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Legacy/tests/testLegacyOrder.py", line 2576, in test_order_payment_condition_not_copied
self.assertEquals(0, len(related_packing_list.contentValues(
AssertionError: 0 != 1
ERROR: test_01_testProductionSimulationExpand (testLegacyProductionOrder.TestProductionOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Legacy/tests/testLegacyProductionOrder.py", line 1331, in test_01_testProductionSimulationExpand
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateProductionSC
CreateNotVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
Tic
> CheckProductionSimulation
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Legacy/tests/testLegacyProductionOrder.py", line 765, in stepCheckProductionSimulation
consumed_movement = applied_rule[consumed_movement_id]
File "/usr/lib/erp5/lib/python/OFS/ObjectManager.py", line 715, in __getitem__
raise KeyError, key
KeyError: 'cr_1_1'
ERROR: test_09_testTransformationWithVariation (testLegacyProductionOrder.TestProductionOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Legacy/tests/testLegacyProductionOrder.py", line 1743, in test_09_testTransformationWithVariation
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateSupplyOrganisation1
CreateSourcingSC
Tic
CreateColourSizeVariatedResource
CreateColourSizeVariatedComponent1
Tic
CreateEmptyTransformation
FillTransformationWithResource
SetTransformationVariation
Tic
CreateTransformationTransformedResource
FillTransformationTransformedResourceWithComponent1
SetTransformationTransformedResourceVariation
SetTransformationTransformedResourceIndustrialPhaseList
Tic
> SetTransformationTransformedResourceQuantityMatrix
SetTransformationTransformedResourceVariationMatrix
Tic
CreateOrganisation
CreateOrder
CreateOrderLine
SetOrderLineVariationCategories
SetOrderLineQuantityMatrix
Tic
OrderOrder
Tic
CheckVariationSimulation
ConfirmOrder
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Legacy/tests/testLegacyProductionOrder.py", line 325, in stepSetTransformationTransformedResourceQuantityMatrix
quantity = self.colour_size_quantity_dict[colour][size],
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 455, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 150, in newContent
raise ValueError('Disallowed subobject type: %s' % portal_type)
ValueError: Disallowed subobject type: Mapped Value
FAIL: Make sure that _separate method works if argument is an empty list.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testMovementGroup.py", line 446, in test_separateMethod
self.assertEqual(instance._separate([]), [])
AssertionError: [[[], {}]] != []
FAIL: test_safe_substitution_content (testNotificationMessageModule.TestNotificationMessageModule), Tests that 'safe' substitution is performed, unless safe_substitute is
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testNotificationMessageModule.py", line 186, in test_safe_substitution_content
self.assertEqual('substitution text: ${b}', text)
AssertionError: 'substitution text: ${b}' != 'substitution text: ${b}\n'
FAIL: test_substitution_content (testNotificationMessageModule.TestNotificationMessageModule), Tests that content and subject have string.Template based substitutions
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testNotificationMessageModule.py", line 129, in test_substitution_content
self.assertEqual('substitution text: b', text)
AssertionError: 'substitution text: b' != 'substitution text: b\n'
FAIL: test_substitution_content_and_convert (testNotificationMessageModule.TestNotificationMessageModule), Tests that substitution also works with different target format.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testNotificationMessageModule.py", line 168, in test_substitution_content_and_convert
self.assertEqual('substitution text: b', text)
AssertionError: 'substitution text: b' != 'substitution text: b\n'
FAIL: test_substitution_content_parameters (testNotificationMessageModule.TestNotificationMessageModule), Tests that we can pass parameters to convert to the substitution method,
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testNotificationMessageModule.py", line 150, in test_substitution_content_parameters
self.assertEqual('substitution text: b', text)
AssertionError: 'substitution text: b' != 'substitution text: b\n'
FAIL: testOpenOrderRule (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 303, in testOpenOrderRule
[(DateTime(3000,2,10,10,0), DateTime(3000,2,11,10,0)),
AssertionError: [(DateTime('3000/02/10 10:00:00 US/Eastern'), DateTime('3000/02/11 10:00:00 US/Eastern')), (DateTime('3000/02/17 10:00:00 US/Eastern'), DateTime('3000/02/18 10:00:00 US/Eastern')), (DateTime('3000/02/24 10:00:00 US/Eastern'), DateTime('3000/02/25 10:00:00 US/Eastern')), (DateTime('3000/03/03 10:00:00 US/Eastern'), DateTime('3000/03/04 10:00:00 US/Eastern')), (DateTime('3000/03/10 10:00:00 US/Eastern'), DateTime('3000/03/11 10:00:00 US/Eastern'))] != [(DateTime('3000/02/10 10:00:00 US/Eastern'), DateTime('3000/02/11 10:00:00 US/Eastern')), (DateTime('3000/02/17 10:00:00 US/Eastern'), DateTime('3000/02/18 10:00:00 US/Eastern')), (DateTime('3000/02/24 10:00:00 US/Eastern'), DateTime('3000/02/25 10:00:00 US/Eastern')), (DateTime('3000/03/03 10:00:00 US/Eastern'), DateTime('3000/03/04 10:00:00 US/Eastern')), (DateTime('3000/03/10 10:00:00 GMT-4'), DateTime('3000/03/11 10:00:00 GMT-4'))]
FAIL: testPeriodicityDateList (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 185, in testPeriodicityDateList
[(D(2008,2,1,0,1), DateTime(2008,2,29)),
AssertionError: [(DateTime('2008/02/01 00:01:00 US/Eastern'), DateTime('2008/02/29')), (DateTime('2008/03/01 00:01:00 US/Eastern'), DateTime('2008/03/31')), (DateTime('2008/04/01 00:01:00 US/Eastern'), DateTime('2008/04/30')), (DateTime('2008/05/01 00:01:00 US/Eastern'), DateTime('2008/05/31')), (DateTime('2008/06/01 00:01:00 US/Eastern'), DateTime('2008/06/30')), (DateTime('2008/07/01 00:01:00 US/Eastern'), DateTime('2008/07/31')), (DateTime('2008/08/01 00:01:00 US/Eastern'), DateTime('2008/08/31')), (DateTime('2008/09/01 00:01:00 US/Eastern'), DateTime('2008/09/30')), (DateTime('2008/10/01 00:01:00 US/Eastern'), DateTime('2008/10/31')), (DateTime('2008/11/01 00:01:00 US/Eastern'), DateTime('2008/11/30'))] != [(DateTime('2008/02/01 00:01:00 US/Eastern'), DateTime('2008/02/29')), (DateTime('2008/03/01 00:01:00 US/Eastern'), DateTime('2008/03/31')), (DateTime('2008/04/01 00:01:00 GMT-4'), DateTime('2008/04/30')), (DateTime('2008/05/01 00:01:00 GMT-4'), DateTime('2008/05/31')), (DateTime('2008/06/01 00:01:00 GMT-4'), DateTime('2008/06/30')), (DateTime('2008/07/01 00:01:00 GMT-4'), DateTime('2008/07/31')), (DateTime('2008/08/01 00:01:00 GMT-4'), DateTime('2008/08/31')), (DateTime('2008/09/01 00:01:00 GMT-4'), DateTime('2008/09/30')), (DateTime('2008/10/01 00:01:00 GMT-4'), DateTime('2008/10/31')), (DateTime('2008/11/01 00:01:00 GMT-4'), DateTime('2008/11/30'))]
FAIL: test_order_payment_condition_not_copied (testOrder.TestOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testOrder.py", line 2578, in test_order_payment_condition_not_copied
self.assertEquals(0, len(related_packing_list.contentValues(
AssertionError: 0 != 1
ERROR: test_01_simpleOrderBuilder (testOrderBuilder.TestOrderBuilder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 401, in test_01_simpleOrderBuilder
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateOrganisation
CreateNotVariatedResource
SetMaxDelayOnResource
SetMinFlowOnResource
Tic
DecreaseOrganisationResourceQuantity
Tic
CreateOrderBuilder
FillOrderBuilder
Tic
> BuildOrderBuilder
Tic
CheckGeneratedDocumentList
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 265, in stepBuildOrderBuilder
generated_document_list = order_builder.build()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/OrderBuilder.py", line 131, in build
root_group_node = self.collectMovement(movement_list)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/OrderBuilder.py", line 268, in collectMovement
root_group_node.append(movement_list)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/MovementGroup.py", line 65, in append
for separate_movement_list, property_dict in \
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/MovementGroup.py", line 102, in separate
return sorted([[sorted(x[0], key=lambda x: x.getId()), x[1]] \
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/MovementGroup.py", line 89, in _separate
property_dict = self._getPropertyDict(movement)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/CategoryMovementGroup.py", line 43, in _getPropertyDict
getProperty = movement.getMappedProperty
AttributeError: getMappedProperty
ERROR: test_01a_simpleOrderBuilderVariatedResource (testOrderBuilder.TestOrderBuilder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 442, in test_01a_simpleOrderBuilderVariatedResource
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateOrganisation
CreateVariatedResource
SetMaxDelayOnResource
SetMinFlowOnResource
Tic
DecreaseOrganisationResourceQuantityVariated
Tic
CreateOrderBuilder
FillOrderBuilder
Tic
> BuildOrderBuilder
Tic
CheckGeneratedDocumentListVariated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 265, in stepBuildOrderBuilder
generated_document_list = order_builder.build()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/OrderBuilder.py", line 131, in build
root_group_node = self.collectMovement(movement_list)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/OrderBuilder.py", line 268, in collectMovement
root_group_node.append(movement_list)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/MovementGroup.py", line 65, in append
for separate_movement_list, property_dict in \
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/MovementGroup.py", line 102, in separate
return sorted([[sorted(x[0], key=lambda x: x.getId()), x[1]] \
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/MovementGroup.py", line 89, in _separate
property_dict = self._getPropertyDict(movement)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/CategoryMovementGroup.py", line 43, in _getPropertyDict
getProperty = movement.getMappedProperty
AttributeError: getMappedProperty
ERROR: test_02_maxDelayResourceOrderBuilder (testOrderBuilder.TestOrderBuilder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 464, in test_02_maxDelayResourceOrderBuilder
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateOrganisation
CreateNotVariatedResource
SetMaxDelayOnResource
SetMinFlowOnResource
Tic
DecreaseOrganisationResourceQuantity
Tic
CreateOrderBuilder
FillOrderBuilder
Tic
> BuildOrderBuilder
Tic
CheckGeneratedDocumentList
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 265, in stepBuildOrderBuilder
generated_document_list = order_builder.build()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/OrderBuilder.py", line 131, in build
root_group_node = self.collectMovement(movement_list)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/OrderBuilder.py", line 268, in collectMovement
root_group_node.append(movement_list)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/MovementGroup.py", line 65, in append
for separate_movement_list, property_dict in \
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/MovementGroup.py", line 102, in separate
return sorted([[sorted(x[0], key=lambda x: x.getId()), x[1]] \
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/MovementGroup.py", line 89, in _separate
property_dict = self._getPropertyDict(movement)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/CategoryMovementGroup.py", line 43, in _getPropertyDict
getProperty = movement.getMappedProperty
AttributeError: getMappedProperty
ERROR: test_03_minFlowResourceOrderBuilder (testOrderBuilder.TestOrderBuilder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 488, in test_03_minFlowResourceOrderBuilder
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateOrganisation
CreateNotVariatedResource
SetMaxDelayOnResource
SetMinFlowOnResource
Tic
DecreaseOrganisationResourceQuantity
Tic
CreateOrderBuilder
FillOrderBuilder
Tic
> BuildOrderBuilder
Tic
CheckGeneratedDocumentList
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testOrderBuilder.py", line 265, in stepBuildOrderBuilder
generated_document_list = order_builder.build()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/OrderBuilder.py", line 131, in build
root_group_node = self.collectMovement(movement_list)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/OrderBuilder.py", line 268, in collectMovement
root_group_node.append(movement_list)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/MovementGroup.py", line 65, in append
for separate_movement_list, property_dict in \
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/MovementGroup.py", line 102, in separate
return sorted([[sorted(x[0], key=lambda x: x.getId()), x[1]] \
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/MovementGroup.py", line 89, in _separate
property_dict = self._getPropertyDict(movement)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/Document/CategoryMovementGroup.py", line 43, in _getPropertyDict
getProperty = movement.getMappedProperty
AttributeError: getMappedProperty
FAIL: test_AccountingLineGeneration (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testPayroll.py", line 3187, in test_AccountingLineGeneration
self.assertEquals(len(accounting_line_list), 4)
AssertionError: 0 != 4
ERROR: test_01_testProductionSimulationExpand (testProductionOrder.TestProductionOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 1357, in test_01_testProductionSimulationExpand
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateProductionSC
CreateNotVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
Tic
> CheckProductionSimulation
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 780, in stepCheckProductionSimulation
consumed_movement = applied_rule[consumed_movement_id]
File "/usr/lib/erp5/lib/python/OFS/ObjectManager.py", line 715, in __getitem__
raise KeyError, key
KeyError: 'cr_1_1'
ERROR: test_08_testTransformationWithEfficiency (testProductionOrder.TestProductionOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 1638, in test_08_testTransformationWithEfficiency
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateSupplyOrganisation1
CreateSourcingSC
Tic
CreateNotVariatedResource
CreateComponent1
CreateEmptyTransformation
FillTransformationWithResource
Tic
CreateTransformationTransformedResource
FillTransformationTransformedResourceWithComponent1
SetTransformationTransformedResourceQuantity
SetTransformationTransformedResourceEfficiency
SetTransformationTransformedResourceIndustrialPhaseList
Tic
CreateOrganisation
CreateOrder
CreateOrderLine
SetOrderLineQuantity
Tic
OrderOrder
Tic
> CheckEfficiencySimulation
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 647, in stepCheckEfficiencySimulation
consumed_movement = [q for q in transformation_applied_rule.contentValues() \
IndexError: list index out of range
ERROR: test_09_testTransformationWithVariation (testProductionOrder.TestProductionOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 1769, in test_09_testTransformationWithVariation
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateSupplyOrganisation1
CreateSourcingSC
Tic
CreateColourSizeVariatedResource
CreateColourSizeVariatedComponent1
Tic
CreateEmptyTransformation
FillTransformationWithResource
SetTransformationVariation
Tic
CreateTransformationTransformedResource
FillTransformationTransformedResourceWithComponent1
SetTransformationTransformedResourceVariation
SetTransformationTransformedResourceIndustrialPhaseList
Tic
> SetTransformationTransformedResourceQuantityMatrix
SetTransformationTransformedResourceVariationMatrix
Tic
CreateOrganisation
CreateOrder
CreateOrderLine
SetOrderLineVariationCategories
SetOrderLineQuantityMatrix
Tic
OrderOrder
Tic
CheckVariationSimulation
ConfirmOrder
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 325, in stepSetTransformationTransformedResourceQuantityMatrix
quantity = self.colour_size_quantity_dict[colour][size],
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/Core/Folder.py", line 455, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/Core/Folder.py", line 150, in newContent
raise ValueError('Disallowed subobject type: %s' % portal_type)
ValueError: Disallowed subobject type: Mapped Value
ERROR: test_01_testProductionSimulationExpand (testProductionOrderApparel.TestProductionOrderApparel)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testProductionOrderApparel.py", line 969, in test_01_testProductionSimulationExpand
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateProductionSC
CreateVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
Tic
> CheckProductionSimulation
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testProductionOrderApparel.py", line 398, in stepCheckProductionSimulation
consumed_movement = applied_rule[consumed_movement_id]
File "/usr/lib/erp5/lib/python/OFS/ObjectManager.py", line 715, in __getitem__
raise KeyError, key
KeyError: 'cr_1_1'
FAIL: test_01_sourcingDelivery (testProductionPackingList.TestProductionDelivery)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testProductionPackingList.py", line 776, in test_01_sourcingDelivery
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateSupplyOrganisation1
CreateSourcingSC
CreateNotVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
Tic
> CheckSourcingSimulation
ConfirmOrder
Tic
CheckSourcingSimulation
CheckSourcingDeliverySimulation
CheckProducedDeliveryPackingListIsConfirmed
CheckProducedDeliveryPackingListIsSolved
CheckSupplyDeliveryPackingListIsConfirmed
CheckSupplyDeliveryPackingListIsSolved
CheckProducedReportIsConfirmed
CheckProducedReportIsSolved
CheckConsumedReportIsConfirmed
CheckConsumedReportIsSolved
DecreaseProducedDeliveryPackingListQuantity
CheckProducedDeliveryPackingListIsCalculating
Tic
CheckProducedDeliveryPackingListIsDiverged
AcceptDecisionProducedDeliveryPackingList
Tic
CheckProducedDeliveryPackingListIsSolved
CheckSourcingDeliverySimulationDecreasedQuantity
CheckSupplyDeliveryPackingListIsConfirmed
CheckSupplyDeliveryPackingListIsDiverged
CheckProducedReportIsConfirmed
CheckProducedReportIsDiverged
CheckConsumedReportIsConfirmed
CheckConsumedReportIsDiverged
SetReadyProducedDeliveryPackingList
StartProducedDeliveryPackingList
StopProducedDeliveryPackingList
DeliverProducedDeliveryPackingList
Tic
CheckSourcingDeliverySimulationDecreasedQuantity
CheckProducedDeliveryPackingListIsDelivered
CheckProducedDeliveryPackingListIsSolved
CheckSupplyDeliveryPackingListIsConfirmed
CheckSupplyDeliveryPackingListIsDiverged
CheckProducedReportIsConfirmed
CheckProducedReportIsDiverged
CheckConsumedReportIsConfirmed
CheckConsumedReportIsDiverged
AdoptPrevisionSupplyDeliveryPackingList
Tic
CheckSupplyDeliveryPackingListIsSolved
CheckProducedReportIsConfirmed
CheckProducedReportIsDiverged
CheckConsumedReportIsConfirmed
CheckConsumedReportIsDiverged
SetReadySupplyDeliveryPackingList
StartSupplyDeliveryPackingList
StopSupplyDeliveryPackingList
DeliverSupplyDeliveryPackingList
Tic
CheckSourcingDeliverySimulationDecreasedQuantity
CheckProducedDeliveryPackingListIsDelivered
CheckProducedDeliveryPackingListIsSolved
CheckSupplyDeliveryPackingListIsDelivered
CheckSupplyDeliveryPackingListIsSolved
CheckProducedReportIsConfirmed
CheckProducedReportIsDiverged
CheckConsumedReportIsConfirmed
CheckConsumedReportIsDiverged
AdoptPrevisionProducedReport
Tic
CheckProducedReportIsSolved
CheckConsumedReportIsConfirmed
CheckConsumedReportIsDiverged
SetReadyProducedReport
StartProducedReport
StopProducedReport
DeliverProducedReport
Tic
CheckSourcingDeliverySimulationDecreasedQuantity
CheckProducedDeliveryPackingListIsDelivered
CheckProducedDeliveryPackingListIsSolved
CheckSupplyDeliveryPackingListIsDelivered
CheckSupplyDeliveryPackingListIsSolved
CheckProducedReportIsDelivered
CheckProducedReportIsSolved
CheckConsumedReportIsConfirmed
CheckConsumedReportIsDiverged
AdoptPrevisionConsumedReport
Tic
CheckProducedReportIsSolved
SetReadyConsumedReport
StartConsumedReport
StopConsumedReport
DeliverConsumedReport
Tic
CheckSourcingDeliverySimulationDecreasedQuantity
CheckProducedDeliveryPackingListIsDelivered
CheckProducedDeliveryPackingListIsSolved
CheckSupplyDeliveryPackingListIsDelivered
CheckSupplyDeliveryPackingListIsSolved
CheckProducedReportIsDelivered
CheckProducedReportIsSolved
CheckConsumedReportIsDelivered
CheckConsumedReportIsSolved
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testProductionOrder.py", line 862, in stepCheckSourcingSimulation
self.assertEquals(1, len(related_simulation_movement_list))
AssertionError: 1 != 0
FAIL: test_01_sourcingDelivery (testProductionPackingListApparel.TestProductionDeliveryApparel)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testProductionPackingList.py", line 776, in test_01_sourcingDelivery
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
ClearActivities
CreateProductionOrganisation1
CreateSupplyOrganisation1
CreateSourcingSC
CreateVariatedResource
CreateComponent1
CreateTransformation
CreateOrganisation
CreateOrder
CreateOrderLine
Tic
OrderOrder
Tic
> CheckSourcingSimulation
ConfirmOrder
Tic
CheckSourcingSimulation
CheckSourcingDeliverySimulation
CheckProducedDeliveryPackingListIsConfirmed
CheckProducedDeliveryPackingListIsSolved
CheckSupplyDeliveryPackingListIsConfirmed
CheckSupplyDeliveryPackingListIsSolved
CheckProducedReportIsConfirmed
CheckProducedReportIsSolved
CheckConsumedReportIsConfirmed
CheckConsumedReportIsSolved
DecreaseProducedDeliveryPackingListQuantity
CheckProducedDeliveryPackingListIsCalculating
Tic
CheckProducedDeliveryPackingListIsDiverged
AcceptDecisionProducedDeliveryPackingList
Tic
CheckProducedDeliveryPackingListIsSolved
CheckSourcingDeliverySimulationDecreasedQuantity
CheckSupplyDeliveryPackingListIsConfirmed
CheckSupplyDeliveryPackingListIsDiverged
CheckProducedReportIsConfirmed
CheckProducedReportIsDiverged
CheckConsumedReportIsConfirmed
CheckConsumedReportIsDiverged
SetReadyProducedDeliveryPackingList
StartProducedDeliveryPackingList
StopProducedDeliveryPackingList
DeliverProducedDeliveryPackingList
Tic
CheckSourcingDeliverySimulationDecreasedQuantity
CheckProducedDeliveryPackingListIsDelivered
CheckProducedDeliveryPackingListIsSolved
CheckSupplyDeliveryPackingListIsConfirmed
CheckSupplyDeliveryPackingListIsDiverged
CheckProducedReportIsConfirmed
CheckProducedReportIsDiverged
CheckConsumedReportIsConfirmed
CheckConsumedReportIsDiverged
AdoptPrevisionSupplyDeliveryPackingList
Tic
CheckSupplyDeliveryPackingListIsSolved
CheckProducedReportIsConfirmed
CheckProducedReportIsDiverged
CheckConsumedReportIsConfirmed
CheckConsumedReportIsDiverged
SetReadySupplyDeliveryPackingList
StartSupplyDeliveryPackingList
StopSupplyDeliveryPackingList
DeliverSupplyDeliveryPackingList
Tic
CheckSourcingDeliverySimulationDecreasedQuantity
CheckProducedDeliveryPackingListIsDelivered
CheckProducedDeliveryPackingListIsSolved
CheckSupplyDeliveryPackingListIsDelivered
CheckSupplyDeliveryPackingListIsSolved
CheckProducedReportIsConfirmed
CheckProducedReportIsDiverged
CheckConsumedReportIsConfirmed
CheckConsumedReportIsDiverged
AdoptPrevisionProducedReport
Tic
CheckProducedReportIsSolved
CheckConsumedReportIsConfirmed
CheckConsumedReportIsDiverged
SetReadyProducedReport
StartProducedReport
StopProducedReport
DeliverProducedReport
Tic
CheckSourcingDeliverySimulationDecreasedQuantity
CheckProducedDeliveryPackingListIsDelivered
CheckProducedDeliveryPackingListIsSolved
CheckSupplyDeliveryPackingListIsDelivered
CheckSupplyDeliveryPackingListIsSolved
CheckProducedReportIsDelivered
CheckProducedReportIsSolved
CheckConsumedReportIsConfirmed
CheckConsumedReportIsDiverged
AdoptPrevisionConsumedReport
Tic
CheckProducedReportIsSolved
SetReadyConsumedReport
StartConsumedReport
StopConsumedReport
DeliverConsumedReport
Tic
CheckSourcingDeliverySimulationDecreasedQuantity
CheckProducedDeliveryPackingListIsDelivered
CheckProducedDeliveryPackingListIsSolved
CheckSupplyDeliveryPackingListIsDelivered
CheckSupplyDeliveryPackingListIsSolved
CheckProducedReportIsDelivered
CheckProducedReportIsSolved
CheckConsumedReportIsDelivered
CheckConsumedReportIsSolved
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testProductionOrderApparel.py", line 477, in stepCheckSourcingSimulation
self.assertEquals(1, len(related_simulation_movement_list))
AssertionError: 1 != 0
FAIL: testSkinSelectionTemplateField (testProxyField.TestProxyField)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/tests/testProxyField.py", line 189, in testSkinSelectionTemplateField
self.assertEquals('Customized Title', field.get_value('title'))
AssertionError: 'Customized Title' != 'Generic Title'
FAIL: test_order_payment_condition_not_copied (testPurchaseOrder.TestPurchaseOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testOrder.py", line 2578, in test_order_payment_condition_not_copied
self.assertEquals(0, len(related_packing_list.contentValues(
AssertionError: 0 != 1
ERROR: testGetPriceWithPriceCurrency (testResource.TestResource)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 1037, in testGetPriceWithPriceCurrency
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_11168acb17e5ee22093b7f163496420e/currency_module/1', 'immediateReindexObject', -2, 5), ('/erp5_portal_11168acb17e5ee22093b7f163496420e/currency_module/2', 'immediateReindexObject', -2, 5), ('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1', 'immediateReindexObject', -2, 5), ('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1/1', 'immediateReindexObject', -2, 5)]
Last error message:
KeyError
'quantity_unit'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1229, in invokeGroup
Module Products.ZSQLCatalog.ZSQLCatalog, line 835, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1271, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1502, in _catalogObjectList
Module Products.ERP5Type.patches.DA, line 199, in DA__call__
- <SQL at /erp5_portal_11168acb17e5ee22093b7f163496420e/portal_catalog/erp5_mysql_innodb/z_catalog_quantity_unit_conversion_list>
Module DocumentTemplate.DT_String, line 476, in __call__
Module DocumentTemplate.DT_Let, line 76, in render
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_Util, line 196, in eval
- __traceback_info__: quantity_unit_conversion_dict
Module <string>, line 1, in <expression>
Module AccessControl.ZopeGuards, line 67, in guarded_getitem
KeyError: 'quantity_unit'
ERROR: testGetPriceWithPriceCurrency (testResource.TestResource)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 160, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1037, in tearDown
PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 115, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1', 'immediateReindexObject', -2, 5), ('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1/1', 'immediateReindexObject', -2, 5)]
Last error message:
KeyError
'quantity_unit'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1229, in invokeGroup
Module Products.ZSQLCatalog.ZSQLCatalog, line 835, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1271, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1502, in _catalogObjectList
Module Products.ERP5Type.patches.DA, line 199, in DA__call__
- <SQL at /erp5_portal_11168acb17e5ee22093b7f163496420e/portal_catalog/erp5_mysql_innodb/z_catalog_quantity_unit_conversion_list>
Module DocumentTemplate.DT_String, line 476, in __call__
Module DocumentTemplate.DT_Let, line 76, in render
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_Util, line 196, in eval
- __traceback_info__: quantity_unit_conversion_dict
Module <string>, line 1, in <expression>
Module AccessControl.ZopeGuards, line 67, in guarded_getitem
KeyError: 'quantity_unit'
ERROR: testGetPriceWithQuantityUnit (testResource.TestResource)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 517, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 102, in afterSetUp
self.setUpPreferences()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 95, in setUpPreferences
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1', 'immediateReindexObject', -2, 5), ('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1/1', 'immediateReindexObject', -2, 5)]
Last error message:
KeyError
'quantity_unit'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1229, in invokeGroup
Module Products.ZSQLCatalog.ZSQLCatalog, line 835, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1271, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1502, in _catalogObjectList
Module Products.ERP5Type.patches.DA, line 199, in DA__call__
- <SQL at /erp5_portal_11168acb17e5ee22093b7f163496420e/portal_catalog/erp5_mysql_innodb/z_catalog_quantity_unit_conversion_list>
Module DocumentTemplate.DT_String, line 476, in __call__
Module DocumentTemplate.DT_Let, line 76, in render
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_Util, line 196, in eval
- __traceback_info__: quantity_unit_conversion_dict
Module <string>, line 1, in <expression>
Module AccessControl.ZopeGuards, line 67, in guarded_getitem
KeyError: 'quantity_unit'
ERROR: testQuantityPrecision (testResource.TestResource), test how to define quantity precision on resources.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 517, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 102, in afterSetUp
self.setUpPreferences()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 95, in setUpPreferences
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1', 'immediateReindexObject', -2, 5), ('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1/1', 'immediateReindexObject', -2, 5)]
Last error message:
KeyError
'quantity_unit'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1229, in invokeGroup
Module Products.ZSQLCatalog.ZSQLCatalog, line 835, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1271, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1502, in _catalogObjectList
Module Products.ERP5Type.patches.DA, line 199, in DA__call__
- <SQL at /erp5_portal_11168acb17e5ee22093b7f163496420e/portal_catalog/erp5_mysql_innodb/z_catalog_quantity_unit_conversion_list>
Module DocumentTemplate.DT_String, line 476, in __call__
Module DocumentTemplate.DT_Let, line 76, in render
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_Util, line 196, in eval
- __traceback_info__: quantity_unit_conversion_dict
Module <string>, line 1, in <expression>
Module AccessControl.ZopeGuards, line 67, in guarded_getitem
KeyError: 'quantity_unit'
ERROR: test_01_getVariationBaseCategoryList (testResource.TestResource)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 517, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 102, in afterSetUp
self.setUpPreferences()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 95, in setUpPreferences
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1', 'immediateReindexObject', -2, 5), ('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1/1', 'immediateReindexObject', -2, 5)]
Last error message:
KeyError
'quantity_unit'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1229, in invokeGroup
Module Products.ZSQLCatalog.ZSQLCatalog, line 835, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1271, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1502, in _catalogObjectList
Module Products.ERP5Type.patches.DA, line 199, in DA__call__
- <SQL at /erp5_portal_11168acb17e5ee22093b7f163496420e/portal_catalog/erp5_mysql_innodb/z_catalog_quantity_unit_conversion_list>
Module DocumentTemplate.DT_String, line 476, in __call__
Module DocumentTemplate.DT_Let, line 76, in render
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_Util, line 196, in eval
- __traceback_info__: quantity_unit_conversion_dict
Module <string>, line 1, in <expression>
Module AccessControl.ZopeGuards, line 67, in guarded_getitem
KeyError: 'quantity_unit'
ERROR: test_02_getVariationRangeCategoryList (testResource.TestResource)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 517, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 102, in afterSetUp
self.setUpPreferences()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 95, in setUpPreferences
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1', 'immediateReindexObject', -2, 5), ('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1/1', 'immediateReindexObject', -2, 5)]
Last error message:
KeyError
'quantity_unit'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1229, in invokeGroup
Module Products.ZSQLCatalog.ZSQLCatalog, line 835, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1271, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1502, in _catalogObjectList
Module Products.ERP5Type.patches.DA, line 199, in DA__call__
- <SQL at /erp5_portal_11168acb17e5ee22093b7f163496420e/portal_catalog/erp5_mysql_innodb/z_catalog_quantity_unit_conversion_list>
Module DocumentTemplate.DT_String, line 476, in __call__
Module DocumentTemplate.DT_Let, line 76, in render
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_Util, line 196, in eval
- __traceback_info__: quantity_unit_conversion_dict
Module <string>, line 1, in <expression>
Module AccessControl.ZopeGuards, line 67, in guarded_getitem
KeyError: 'quantity_unit'
ERROR: test_03_getVariationRangeCategoryItemList (testResource.TestResource)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 517, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 102, in afterSetUp
self.setUpPreferences()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 95, in setUpPreferences
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1', 'immediateReindexObject', -2, 5), ('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1/1', 'immediateReindexObject', -2, 5)]
Last error message:
KeyError
'quantity_unit'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1229, in invokeGroup
Module Products.ZSQLCatalog.ZSQLCatalog, line 835, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1271, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1502, in _catalogObjectList
Module Products.ERP5Type.patches.DA, line 199, in DA__call__
- <SQL at /erp5_portal_11168acb17e5ee22093b7f163496420e/portal_catalog/erp5_mysql_innodb/z_catalog_quantity_unit_conversion_list>
Module DocumentTemplate.DT_String, line 476, in __call__
Module DocumentTemplate.DT_Let, line 76, in render
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_Util, line 196, in eval
- __traceback_info__: quantity_unit_conversion_dict
Module <string>, line 1, in <expression>
Module AccessControl.ZopeGuards, line 67, in guarded_getitem
KeyError: 'quantity_unit'
ERROR: test_04_getVariationCategoryList (testResource.TestResource)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 517, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 102, in afterSetUp
self.setUpPreferences()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 95, in setUpPreferences
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1', 'immediateReindexObject', -2, 5), ('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1/1', 'immediateReindexObject', -2, 5)]
Last error message:
KeyError
'quantity_unit'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1229, in invokeGroup
Module Products.ZSQLCatalog.ZSQLCatalog, line 835, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1271, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1502, in _catalogObjectList
Module Products.ERP5Type.patches.DA, line 199, in DA__call__
- <SQL at /erp5_portal_11168acb17e5ee22093b7f163496420e/portal_catalog/erp5_mysql_innodb/z_catalog_quantity_unit_conversion_list>
Module DocumentTemplate.DT_String, line 476, in __call__
Module DocumentTemplate.DT_Let, line 76, in render
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_Util, line 196, in eval
- __traceback_info__: quantity_unit_conversion_dict
Module <string>, line 1, in <expression>
Module AccessControl.ZopeGuards, line 67, in guarded_getitem
KeyError: 'quantity_unit'
ERROR: test_05_getVariationCategoryList (testResource.TestResource)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 517, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 102, in afterSetUp
self.setUpPreferences()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 95, in setUpPreferences
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1', 'immediateReindexObject', -2, 5), ('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1/1', 'immediateReindexObject', -2, 5)]
Last error message:
KeyError
'quantity_unit'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1229, in invokeGroup
Module Products.ZSQLCatalog.ZSQLCatalog, line 835, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1271, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1502, in _catalogObjectList
Module Products.ERP5Type.patches.DA, line 199, in DA__call__
- <SQL at /erp5_portal_11168acb17e5ee22093b7f163496420e/portal_catalog/erp5_mysql_innodb/z_catalog_quantity_unit_conversion_list>
Module DocumentTemplate.DT_String, line 476, in __call__
Module DocumentTemplate.DT_Let, line 76, in render
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_Util, line 196, in eval
- __traceback_info__: quantity_unit_conversion_dict
Module <string>, line 1, in <expression>
Module AccessControl.ZopeGuards, line 67, in guarded_getitem
KeyError: 'quantity_unit'
ERROR: test_06_getVariationCategoryItemList (testResource.TestResource)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 517, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 102, in afterSetUp
self.setUpPreferences()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 95, in setUpPreferences
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1', 'immediateReindexObject', -2, 5), ('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1/1', 'immediateReindexObject', -2, 5)]
Last error message:
KeyError
'quantity_unit'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1229, in invokeGroup
Module Products.ZSQLCatalog.ZSQLCatalog, line 835, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1271, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1502, in _catalogObjectList
Module Products.ERP5Type.patches.DA, line 199, in DA__call__
- <SQL at /erp5_portal_11168acb17e5ee22093b7f163496420e/portal_catalog/erp5_mysql_innodb/z_catalog_quantity_unit_conversion_list>
Module DocumentTemplate.DT_String, line 476, in __call__
Module DocumentTemplate.DT_Let, line 76, in render
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_Util, line 196, in eval
- __traceback_info__: quantity_unit_conversion_dict
Module <string>, line 1, in <expression>
Module AccessControl.ZopeGuards, line 67, in guarded_getitem
KeyError: 'quantity_unit'
ERROR: test_07_getVariationCategoryItemList (testResource.TestResource)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 517, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 102, in afterSetUp
self.setUpPreferences()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 95, in setUpPreferences
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1', 'immediateReindexObject', -2, 5), ('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1/1', 'immediateReindexObject', -2, 5)]
Last error message:
KeyError
'quantity_unit'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1229, in invokeGroup
Module Products.ZSQLCatalog.ZSQLCatalog, line 835, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1271, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1502, in _catalogObjectList
Module Products.ERP5Type.patches.DA, line 199, in DA__call__
- <SQL at /erp5_portal_11168acb17e5ee22093b7f163496420e/portal_catalog/erp5_mysql_innodb/z_catalog_quantity_unit_conversion_list>
Module DocumentTemplate.DT_String, line 476, in __call__
Module DocumentTemplate.DT_Let, line 76, in render
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_Util, line 196, in eval
- __traceback_info__: quantity_unit_conversion_dict
Module <string>, line 1, in <expression>
Module AccessControl.ZopeGuards, line 67, in guarded_getitem
KeyError: 'quantity_unit'
ERROR: test_08_variationPropertyList (testResource.TestResource)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 517, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 102, in afterSetUp
self.setUpPreferences()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 95, in setUpPreferences
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1', 'immediateReindexObject', -2, 5), ('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1/1', 'immediateReindexObject', -2, 5)]
Last error message:
KeyError
'quantity_unit'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1229, in invokeGroup
Module Products.ZSQLCatalog.ZSQLCatalog, line 835, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1271, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1502, in _catalogObjectList
Module Products.ERP5Type.patches.DA, line 199, in DA__call__
- <SQL at /erp5_portal_11168acb17e5ee22093b7f163496420e/portal_catalog/erp5_mysql_innodb/z_catalog_quantity_unit_conversion_list>
Module DocumentTemplate.DT_String, line 476, in __call__
Module DocumentTemplate.DT_Let, line 76, in render
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_Util, line 196, in eval
- __traceback_info__: quantity_unit_conversion_dict
Module <string>, line 1, in <expression>
Module AccessControl.ZopeGuards, line 67, in guarded_getitem
KeyError: 'quantity_unit'
ERROR: test_09_getPrice (testResource.TestResource)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 517, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 102, in afterSetUp
self.setUpPreferences()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 95, in setUpPreferences
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1', 'immediateReindexObject', -2, 5), ('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1/1', 'immediateReindexObject', -2, 5)]
Last error message:
KeyError
'quantity_unit'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1229, in invokeGroup
Module Products.ZSQLCatalog.ZSQLCatalog, line 835, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1271, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1502, in _catalogObjectList
Module Products.ERP5Type.patches.DA, line 199, in DA__call__
- <SQL at /erp5_portal_11168acb17e5ee22093b7f163496420e/portal_catalog/erp5_mysql_innodb/z_catalog_quantity_unit_conversion_list>
Module DocumentTemplate.DT_String, line 476, in __call__
Module DocumentTemplate.DT_Let, line 76, in render
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_Util, line 196, in eval
- __traceback_info__: quantity_unit_conversion_dict
Module <string>, line 1, in <expression>
Module AccessControl.ZopeGuards, line 67, in guarded_getitem
KeyError: 'quantity_unit'
ERROR: test_10_getPriceWithOptions (testResource.TestResource)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 517, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 102, in afterSetUp
self.setUpPreferences()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 95, in setUpPreferences
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1', 'immediateReindexObject', -2, 5), ('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1/1', 'immediateReindexObject', -2, 5)]
Last error message:
KeyError
'quantity_unit'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1229, in invokeGroup
Module Products.ZSQLCatalog.ZSQLCatalog, line 835, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1271, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1502, in _catalogObjectList
Module Products.ERP5Type.patches.DA, line 199, in DA__call__
- <SQL at /erp5_portal_11168acb17e5ee22093b7f163496420e/portal_catalog/erp5_mysql_innodb/z_catalog_quantity_unit_conversion_list>
Module DocumentTemplate.DT_String, line 476, in __call__
Module DocumentTemplate.DT_Let, line 76, in render
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_Util, line 196, in eval
- __traceback_info__: quantity_unit_conversion_dict
Module <string>, line 1, in <expression>
Module AccessControl.ZopeGuards, line 67, in guarded_getitem
KeyError: 'quantity_unit'
ERROR: test_11_getPriceWithDestinationSection (testResource.TestResource)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 517, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 102, in afterSetUp
self.setUpPreferences()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 95, in setUpPreferences
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1', 'immediateReindexObject', -2, 5), ('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1/1', 'immediateReindexObject', -2, 5)]
Last error message:
KeyError
'quantity_unit'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1229, in invokeGroup
Module Products.ZSQLCatalog.ZSQLCatalog, line 835, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1271, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1502, in _catalogObjectList
Module Products.ERP5Type.patches.DA, line 199, in DA__call__
- <SQL at /erp5_portal_11168acb17e5ee22093b7f163496420e/portal_catalog/erp5_mysql_innodb/z_catalog_quantity_unit_conversion_list>
Module DocumentTemplate.DT_String, line 476, in __call__
Module DocumentTemplate.DT_Let, line 76, in render
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_Util, line 196, in eval
- __traceback_info__: quantity_unit_conversion_dict
Module <string>, line 1, in <expression>
Module AccessControl.ZopeGuards, line 67, in guarded_getitem
KeyError: 'quantity_unit'
ERROR: test_11b_getPriceWithCells (testResource.TestResource)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 517, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 102, in afterSetUp
self.setUpPreferences()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 95, in setUpPreferences
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1', 'immediateReindexObject', -2, 5), ('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1/1', 'immediateReindexObject', -2, 5)]
Last error message:
KeyError
'quantity_unit'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1229, in invokeGroup
Module Products.ZSQLCatalog.ZSQLCatalog, line 835, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1271, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1502, in _catalogObjectList
Module Products.ERP5Type.patches.DA, line 199, in DA__call__
- <SQL at /erp5_portal_11168acb17e5ee22093b7f163496420e/portal_catalog/erp5_mysql_innodb/z_catalog_quantity_unit_conversion_list>
Module DocumentTemplate.DT_String, line 476, in __call__
Module DocumentTemplate.DT_Let, line 76, in render
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_Util, line 196, in eval
- __traceback_info__: quantity_unit_conversion_dict
Module <string>, line 1, in <expression>
Module AccessControl.ZopeGuards, line 67, in guarded_getitem
KeyError: 'quantity_unit'
ERROR: test_12_getInternalVsPurchaseVsSalePrice (testResource.TestResource)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 517, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 102, in afterSetUp
self.setUpPreferences()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 95, in setUpPreferences
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1', 'immediateReindexObject', -2, 5), ('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1/1', 'immediateReindexObject', -2, 5)]
Last error message:
KeyError
'quantity_unit'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1229, in invokeGroup
Module Products.ZSQLCatalog.ZSQLCatalog, line 835, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1271, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1502, in _catalogObjectList
Module Products.ERP5Type.patches.DA, line 199, in DA__call__
- <SQL at /erp5_portal_11168acb17e5ee22093b7f163496420e/portal_catalog/erp5_mysql_innodb/z_catalog_quantity_unit_conversion_list>
Module DocumentTemplate.DT_String, line 476, in __call__
Module DocumentTemplate.DT_Let, line 76, in render
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_Util, line 196, in eval
- __traceback_info__: quantity_unit_conversion_dict
Module <string>, line 1, in <expression>
Module AccessControl.ZopeGuards, line 67, in guarded_getitem
KeyError: 'quantity_unit'
ERROR: test_defaultSupplyLineAfterClone (testResource.TestResource), Check that default supply line is properly set up after clone
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 517, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 102, in afterSetUp
self.setUpPreferences()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 95, in setUpPreferences
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1', 'immediateReindexObject', -2, 5), ('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1/1', 'immediateReindexObject', -2, 5)]
Last error message:
KeyError
'quantity_unit'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1229, in invokeGroup
Module Products.ZSQLCatalog.ZSQLCatalog, line 835, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1271, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1502, in _catalogObjectList
Module Products.ERP5Type.patches.DA, line 199, in DA__call__
- <SQL at /erp5_portal_11168acb17e5ee22093b7f163496420e/portal_catalog/erp5_mysql_innodb/z_catalog_quantity_unit_conversion_list>
Module DocumentTemplate.DT_String, line 476, in __call__
Module DocumentTemplate.DT_Let, line 76, in render
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_Util, line 196, in eval
- __traceback_info__: quantity_unit_conversion_dict
Module <string>, line 1, in <expression>
Module AccessControl.ZopeGuards, line 67, in guarded_getitem
KeyError: 'quantity_unit'
ERROR: test_sourceDestinationReferenceOnSupplyLineOnDefaultSupplyLine (testResource.TestResource), Check that it's possible to set and get a source/destination_reference
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 517, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 102, in afterSetUp
self.setUpPreferences()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testResource.py", line 95, in setUpPreferences
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 719, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1', 'immediateReindexObject', -2, 5), ('/erp5_portal_11168acb17e5ee22093b7f163496420e/product_module/1/1', 'immediateReindexObject', -2, 5)]
Last error message:
KeyError
'quantity_unit'
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 1229, in invokeGroup
Module Products.ZSQLCatalog.ZSQLCatalog, line 835, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1271, in catalogObjectList
Module Products.ZSQLCatalog.SQLCatalog, line 1502, in _catalogObjectList
Module Products.ERP5Type.patches.DA, line 199, in DA__call__
- <SQL at /erp5_portal_11168acb17e5ee22093b7f163496420e/portal_catalog/erp5_mysql_innodb/z_catalog_quantity_unit_conversion_list>
Module DocumentTemplate.DT_String, line 476, in __call__
Module DocumentTemplate.DT_Let, line 76, in render
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_In, line 703, in renderwob
Module DocumentTemplate.DT_Util, line 196, in eval
- __traceback_info__: quantity_unit_conversion_dict
Module <string>, line 1, in <expression>
Module AccessControl.ZopeGuards, line 67, in guarded_getitem
KeyError: 'quantity_unit'
FAIL: test checking if the field values are of the proper type.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/Formulator/tests/testSerializeForm.py", line 358, in test_fieldValueTypes
self.assertEquals(field.values, field2.values)
AssertionError: {'alternate_name': '', 'title': 'Test Title', 'date_separator': '', 'editable': 0, 'input_order': 'mdy', 'start_datetime': None, 'description': '', 'default_now': 0, 'allow_empty_time': 0, 'ampm_time_style': 0, 'hide_day': 0, 'date_only': 0, 'time_separator': '$', 'hidden': 0, 'default': None, 'css_class': 'test_css', 'required': 1, 'enabled': 1, 'input_style': 'list', 'external_validator': '', 'hidden_day_is_last_day': 0, 'end_datetime': None, 'timezone_style': 0} != {'alternate_name': '', 'title': 'Test Title', 'date_separator': '', 'editable': 0, 'input_order': 'mdy', 'start_datetime': '', 'description': '', 'default_now': 0, 'allow_empty_time': 0, 'ampm_time_style': 0, 'hide_day': 0, 'date_only': 0, 'time_separator': '$', 'hidden': 0, 'default': '', 'css_class': 'test_css', 'required': 1, 'enabled': 1, 'input_style': 'list', 'external_validator': '', 'hidden_day_is_last_day': 0, 'end_datetime': '', 'timezone_style': 0}
FAIL: test_tax_line_build_accounting (testTaxLineTradeCondition.TestTaxLineOrderSimulationSaleOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testTaxLineTradeCondition.py", line 947, in test_tax_line_build_accounting
self.assertEquals(3, len(accounting_line_list))
AssertionError: 3 != 0
FAIL: test_tax_line_simulation (testTaxLineTradeCondition.TestTaxLineOrderSimulationSaleOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testTaxLineTradeCondition.py", line 699, in test_tax_line_simulation
self.assertEquals(1, len(invoice_rule_list))
AssertionError: 1 != 0
FAIL: test_tax_line_build_accounting (testTaxLineTradeCondition.TestTaxLineOrderSimulationPurchaseOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testTaxLineTradeCondition.py", line 947, in test_tax_line_build_accounting
self.assertEquals(3, len(accounting_line_list))
AssertionError: 3 != 0
FAIL: test_tax_line_simulation (testTaxLineTradeCondition.TestTaxLineOrderSimulationPurchaseOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testTaxLineTradeCondition.py", line 699, in test_tax_line_simulation
self.assertEquals(1, len(invoice_rule_list))
AssertionError: 1 != 0
FAIL: test_tax_line_simulation (testTaxLineTradeCondition.TestTaxLineInvoiceSimulationPurchaseInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testTaxLineTradeCondition.py", line 1202, in test_tax_line_simulation
self.assertEquals(3, len(accounting_line_list))
AssertionError: 3 != 0
FAIL: test_tax_line_simulation (testTaxLineTradeCondition.TestTaxLineInvoiceSimulationSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testTaxLineTradeCondition.py", line 1202, in test_tax_line_simulation
self.assertEquals(3, len(accounting_line_list))
AssertionError: 3 != 0
FAIL: test_NonDeliveryTemplateNotIndexable (testTemplate.TestTemplate)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testTemplate.py", line 345, in test_NonDeliveryTemplateNotIndexable
self._testTemplateNotIndexable(document)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testTemplate.py", line 315, in _testTemplateNotIndexable
self.assertEquals(0, len(self.portal.portal_catalog(uid=template.getUid())))
AssertionError: 0 != 1
FAIL: test_manyTemplatesWithoutReindexation (testTemplate.TestTemplate), Check what happen when templates are created one by one without reindexation
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testTemplate.py", line 279, in test_manyTemplatesWithoutReindexation
self.assertEqual(len(preference_id_list) + 1, len(new_preference_id_list))
AssertionError: 1 != 2
FAIL: test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving (testTradeModelLine.TestTradeModelLineSale), Check that after changing invoice line invoice is properly diverged and it is possible to solve
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2104, in test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving
sequence_list.play(self, quiet=True)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateServiceTax
CreateServiceDiscount
CreatePriceCurrency
CreateProductDiscounted
CreateProductTaxed
CreateProductDiscountedTaxed
CreateSource
CreateSourceSection
CreateDestination
CreateDestinationSection
Tic
CreateBusinessProcess
CreateBusinessState
ModifyBusinessStateTaxed
CreateBusinessState
ModifyBusinessStateInvoiced
CreateBusinessPath
ModifyBusinessPathTaxing
CreateBusinessPath
ModifyBusinessPathDiscounting
CreateTradeCondition
SpecialiseTradeConditionWithBusinessProcess
CreateTradeModelLine
ModifyTradeModelLineTax
CreateTradeModelLine
ModifyTradeModelLineDiscount
Tic
CreateOrder
SpecialiseOrderTradeCondition
FillOrder
Tic
CreateOrderLine
ModifyOrderLineTaxed
CreateOrderLine
ModifyOrderLineDiscounted
CreateOrderLine
ModifyOrderLineDiscountedTaxed
Tic
CheckOrderComplexTradeConditionAggregatedAmountList
CheckOrderLineTaxedAggregatedAmountList
CheckOrderLineDiscountedTaxedAggregatedAmountList
CheckOrderLineDiscountedAggregatedAmountList
Tic
PlanOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
ConfirmOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetPackingList
PackPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
StartPackingList
StopPackingList
DeliverPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetInvoice
CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
GetInvoiceLineDiscounted
GetInvoiceLineDiscountedTaxed
GetInvoiceLineTaxed
ModifyQuantityInvoiceLineDiscounted
ModifyQuantityInvoiceLineDiscountedTaxed
ModifyQuantityInvoiceLineTaxed
Tic
CheckInvoiceCausalityStateDiverged
AcceptDecisionQuantityInvoice
Tic
> CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 459, in stepCheckInvoiceCausalityStateSolved
invoice.getDivergenceList())
AssertionError: [<DivergenceMessage object at 0x5c66b48
'decision_value': 1.9999999999999998
'divergence_scope': 'quantity'
'prevision_value': 5.0
'mapping': {}
'object_relative_url': 'accounting_module/5/5'
'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/8/3/1/1/1/1/2/1>
'tested_property': 'quantity'
'decision_title': '1.9999999999999998'
'message': 'Quantity'>, <DivergenceMessage object at 0x5fd5950
'decision_value': -0.60000000000000009
'divergence_scope': 'quantity'
'prevision_value': -1.5
'mapping': {}
'object_relative_url': 'accounting_module/5/5'
'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/8/2/1/1/1/1/2/2>
'tested_property': 'quantity'
'decision_title': '-0.60000000000000009'
'message': 'Quantity'>, <DivergenceMessage object at 0x7bb23b0
'decision_value': 28.5
'divergence_scope': 'quantity'
'prevision_value': 71.25
'mapping': {}
'object_relative_url': 'accounting_module/5/5'
'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/8/1/1/1/1/1/2/2>
'tested_property': 'quantity'
'decision_title': '28.5'
'message': 'Quantity'>, <DivergenceMessage object at 0x968a1b8
'decision_value': 12.0
'divergence_scope': 'quantity'
'prevision_value': 30.0
'mapping': {}
'object_relative_url': 'accounting_module/5/4'
'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/8/2/1/1/1/1/2/1>
'tested_property': 'quantity'
'decision_title': '12.0'
'message': 'Quantity'>, <DivergenceMessage object at 0x7373cb0
'decision_value': 30.0
'divergence_scope': 'quantity'
'prevision_value': 75.0
'mapping': {}
'object_relative_url': 'accounting_module/5/4'
'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/8/1/1/1/1/1/2/1>
'tested_property': 'quantity'
'decision_title': '30.0'
'message': 'Quantity'>]
FAIL: test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio (testTradeModelLine.TestTradeModelLineSale), Check building invoice after splitting packing list using different ratio
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2185, in test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio
sequence_list.play(self, quiet=True)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateServiceTax
CreateServiceDiscount
CreatePriceCurrency
CreateProductDiscounted
CreateProductTaxed
CreateProductDiscountedTaxed
CreateSource
CreateSourceSection
CreateDestination
CreateDestinationSection
Tic
CreateBusinessProcess
CreateBusinessState
ModifyBusinessStateTaxed
CreateBusinessState
ModifyBusinessStateInvoiced
CreateBusinessPath
ModifyBusinessPathTaxing
CreateBusinessPath
ModifyBusinessPathDiscounting
CreateTradeCondition
SpecialiseTradeConditionWithBusinessProcess
CreateTradeModelLine
ModifyTradeModelLineTax
CreateTradeModelLine
ModifyTradeModelLineDiscount
Tic
CreateOrder
SpecialiseOrderTradeCondition
FillOrder
Tic
CreateOrderLine
ModifyOrderLineTaxed
CreateOrderLine
ModifyOrderLineDiscounted
CreateOrderLine
ModifyOrderLineDiscountedTaxed
Tic
CheckOrderComplexTradeConditionAggregatedAmountList
CheckOrderLineTaxedAggregatedAmountList
CheckOrderLineDiscountedTaxedAggregatedAmountList
CheckOrderLineDiscountedAggregatedAmountList
Tic
PlanOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
ConfirmOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetPackingList
DecreasePackingListLineListQuantity
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
CheckPackingListDiverged
SplitAndDeferPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetNewPackingList
PackPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
StartPackingList
StopPackingList
DeliverPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetInvoice
> CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
SetNewPackingListAsPackingList
PackPackingList
Tic
StartPackingList
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
StopPackingList
DeliverPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetInvoice
CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 459, in stepCheckInvoiceCausalityStateSolved
invoice.getDivergenceList())
AssertionError: [<DivergenceMessage object at 0x99c5878
'decision_value': -0.049999999999999989
'divergence_scope': 'property'
'prevision_value': -0.050000000000000003
'mapping': {}
'object_relative_url': 'accounting_module/12/5'
'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/21/2/1/1/1/1/2/1>
'tested_property': 'price'
'message': 'Price'>, <DivergenceMessage object at 0x7a10950
'decision_value': -0.049999999999999989
'divergence_scope': 'property'
'prevision_value': -0.050000000000000003
'mapping': {}
'object_relative_url': 'accounting_module/12/5'
'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/21/1/1/1/1/1/2/1>
'tested_property': 'price'
'message': 'Price'>]
FAIL: test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check that after changing invoice line invoice is properly diverged and it is possible to solve
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2104, in test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving
sequence_list.play(self, quiet=True)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateServiceTax
CreateServiceDiscount
CreatePriceCurrency
CreateProductDiscounted
CreateProductTaxed
CreateProductDiscountedTaxed
CreateSource
CreateSourceSection
CreateDestination
CreateDestinationSection
Tic
CreateBusinessProcess
CreateBusinessState
ModifyBusinessStateTaxed
CreateBusinessState
ModifyBusinessStateInvoiced
CreateBusinessPath
ModifyBusinessPathTaxing
CreateBusinessPath
ModifyBusinessPathDiscounting
CreateTradeCondition
SpecialiseTradeConditionWithBusinessProcess
CreateTradeModelLine
ModifyTradeModelLineTax
CreateTradeModelLine
ModifyTradeModelLineDiscount
Tic
CreateOrder
SpecialiseOrderTradeCondition
FillOrder
Tic
CreateOrderLine
ModifyOrderLineTaxed
CreateOrderLine
ModifyOrderLineDiscounted
CreateOrderLine
ModifyOrderLineDiscountedTaxed
Tic
CheckOrderComplexTradeConditionAggregatedAmountList
CheckOrderLineTaxedAggregatedAmountList
CheckOrderLineDiscountedTaxedAggregatedAmountList
CheckOrderLineDiscountedAggregatedAmountList
Tic
PlanOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
ConfirmOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetPackingList
PackPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
StartPackingList
StopPackingList
DeliverPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetInvoice
CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
GetInvoiceLineDiscounted
GetInvoiceLineDiscountedTaxed
GetInvoiceLineTaxed
ModifyQuantityInvoiceLineDiscounted
ModifyQuantityInvoiceLineDiscountedTaxed
ModifyQuantityInvoiceLineTaxed
Tic
CheckInvoiceCausalityStateDiverged
AcceptDecisionQuantityInvoice
Tic
> CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 459, in stepCheckInvoiceCausalityStateSolved
invoice.getDivergenceList())
AssertionError: [<DivergenceMessage object at 0x71c3638
'decision_value': 1.9999999999999998
'divergence_scope': 'quantity'
'prevision_value': 5.0
'mapping': {}
'object_relative_url': 'accounting_module/5/5'
'simulation_movement': <SimulationMovement at /erp5_portal_f961ca546667fb6832d17eeef19b90b9/portal_simulation/8/3/1/1/1/1/2/1>
'tested_property': 'quantity'
'decision_title': '1.9999999999999998'
'message': 'Quantity'>, <DivergenceMessage object at 0x8c7b050
'decision_value': -0.60000000000000009
'divergence_scope': 'quantity'
'prevision_value': -1.5
'mapping': {}
'object_relative_url': 'accounting_module/5/5'
'simulation_movement': <SimulationMovement at /erp5_portal_f961ca546667fb6832d17eeef19b90b9/portal_simulation/8/2/1/1/1/1/2/2>
'tested_property': 'quantity'
'decision_title': '-0.60000000000000009'
'message': 'Quantity'>, <DivergenceMessage object at 0x788de18
'decision_value': 28.5
'divergence_scope': 'quantity'
'prevision_value': 71.25
'mapping': {}
'object_relative_url': 'accounting_module/5/5'
'simulation_movement': <SimulationMovement at /erp5_portal_f961ca546667fb6832d17eeef19b90b9/portal_simulation/8/1/1/1/1/1/2/2>
'tested_property': 'quantity'
'decision_title': '28.5'
'message': 'Quantity'>, <DivergenceMessage object at 0x72aaa70
'decision_value': 12.0
'divergence_scope': 'quantity'
'prevision_value': 30.0
'mapping': {}
'object_relative_url': 'accounting_module/5/4'
'simulation_movement': <SimulationMovement at /erp5_portal_f961ca546667fb6832d17eeef19b90b9/portal_simulation/8/2/1/1/1/1/2/1>
'tested_property': 'quantity'
'decision_title': '12.0'
'message': 'Quantity'>, <DivergenceMessage object at 0x81df0e0
'decision_value': 30.0
'divergence_scope': 'quantity'
'prevision_value': 75.0
'mapping': {}
'object_relative_url': 'accounting_module/5/4'
'simulation_movement': <SimulationMovement at /erp5_portal_f961ca546667fb6832d17eeef19b90b9/portal_simulation/8/1/1/1/1/1/2/1>
'tested_property': 'quantity'
'decision_title': '30.0'
'message': 'Quantity'>]
FAIL: test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check building invoice after splitting packing list using different ratio
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2185, in test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio
sequence_list.play(self, quiet=True)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateServiceTax
CreateServiceDiscount
CreatePriceCurrency
CreateProductDiscounted
CreateProductTaxed
CreateProductDiscountedTaxed
CreateSource
CreateSourceSection
CreateDestination
CreateDestinationSection
Tic
CreateBusinessProcess
CreateBusinessState
ModifyBusinessStateTaxed
CreateBusinessState
ModifyBusinessStateInvoiced
CreateBusinessPath
ModifyBusinessPathTaxing
CreateBusinessPath
ModifyBusinessPathDiscounting
CreateTradeCondition
SpecialiseTradeConditionWithBusinessProcess
CreateTradeModelLine
ModifyTradeModelLineTax
CreateTradeModelLine
ModifyTradeModelLineDiscount
Tic
CreateOrder
SpecialiseOrderTradeCondition
FillOrder
Tic
CreateOrderLine
ModifyOrderLineTaxed
CreateOrderLine
ModifyOrderLineDiscounted
CreateOrderLine
ModifyOrderLineDiscountedTaxed
Tic
CheckOrderComplexTradeConditionAggregatedAmountList
CheckOrderLineTaxedAggregatedAmountList
CheckOrderLineDiscountedTaxedAggregatedAmountList
CheckOrderLineDiscountedAggregatedAmountList
Tic
PlanOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
ConfirmOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetPackingList
DecreasePackingListLineListQuantity
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
CheckPackingListDiverged
SplitAndDeferPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetNewPackingList
PackPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
StartPackingList
StopPackingList
DeliverPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetInvoice
> CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
SetNewPackingListAsPackingList
PackPackingList
Tic
StartPackingList
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
StopPackingList
DeliverPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetInvoice
CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 459, in stepCheckInvoiceCausalityStateSolved
invoice.getDivergenceList())
AssertionError: [<DivergenceMessage object at 0xa050d88
'decision_value': -0.049999999999999989
'divergence_scope': 'property'
'prevision_value': -0.050000000000000003
'mapping': {}
'object_relative_url': 'accounting_module/12/5'
'simulation_movement': <SimulationMovement at /erp5_portal_f961ca546667fb6832d17eeef19b90b9/portal_simulation/21/2/1/1/1/1/2/1>
'tested_property': 'price'
'message': 'Price'>, <DivergenceMessage object at 0xa0583b0
'decision_value': -0.049999999999999989
'divergence_scope': 'property'
'prevision_value': -0.050000000000000003
'mapping': {}
'object_relative_url': 'accounting_module/12/5'
'simulation_movement': <SimulationMovement at /erp5_portal_f961ca546667fb6832d17eeef19b90b9/portal_simulation/21/1/1/1/1/1/2/1>
'tested_property': 'price'
'message': 'Price'>]
FAIL: test_configurationOfFieldLibrary (testXHTML.TestXHTML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testXHTML.py", line 186, in test_configurationOfFieldLibrary
self.fail(message) # uncomment above for details on each field
AssertionError: 5417 fields to modify
FAIL: test_deadProxyFields (testXHTML.TestXHTML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testXHTML.py", line 172, in test_deadProxyFields
self.fail(message)
AssertionError:
Dead proxy field list('Print', 'Base_viewTradeFieldLibrary/my_report_mode_at_date', 'Base_viewFieldLibrary', 'my_report_mode_at_date')
('View', 'Base_viewTradeFieldLibrary/my_report_mode_at_date', 'Base_viewFieldLibrary', 'my_report_mode_at_date')
FAIL: test_erp5_dms_Drawing_OOoDocument_viewAsWeb (testXHTML.TestXHTML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testXHTML.py", line 425, in testMethod
bt_name=bt_name))
AssertionError: Using w3c validator to parse the view "OOoDocument_viewAsWeb" (from erp5_dms bt) with warnings displayed :
Error: line 520 column 43 : there is no attribute "class"
Error: line 520 column 63 : there is no attribute "style"
Error: line 520 column 105 : there is no attribute "src"
Error: line 520 column 222 : there is no attribute "onload"
Error: line 520 column 244 : element "iframe" undefined
FAIL: test_erp5_dms_Presentation_OOoDocument_viewAsWeb (testXHTML.TestXHTML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testXHTML.py", line 425, in testMethod
bt_name=bt_name))
AssertionError: Using w3c validator to parse the view "OOoDocument_viewAsWeb" (from erp5_dms bt) with warnings displayed :
Error: line 520 column 43 : there is no attribute "class"
Error: line 520 column 63 : there is no attribute "style"
Error: line 520 column 105 : there is no attribute "src"
Error: line 520 column 222 : there is no attribute "onload"
Error: line 520 column 244 : element "iframe" undefined
FAIL: test_listActionInListbox (testXHTML.TestXHTML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testXHTML.py", line 254, in test_listActionInListbox
self.assertEquals(error_list, [])
AssertionError: [('erp5_core/Documentation_view/my_dynamic_accessor_list', 'bla'), ('erp5_core/Documentation_view/my_dynamic_category_list', 'bla'), ('erp5_core/Documentation_view/my_static_property_list', 'bla'), ('erp5_core/Documentation_view/my_static_method_list', 'bla'), ('erp5_core/Documentation_view/my_dynamic_property_list', 'bla'), ('erp5_core/Documentation_view/my_dynamic_method_list', 'bla'), ('erp5_web_widget_library/WebSection_viewLatestDocumentListGadget/listbox', 'WebSite_viewLatestAdditionList'), ('erp5_project/Project_viewQuantityReport/listbox', 'Folder_viewContent')] != []
More information about the Erp5-report
mailing list