[Erp5-report] ERP5 r33185: 3302 Tests, 38 Errors, 104 Failures, 80 Skips

Mon Mar 1 17:15:56 CET 2010

Test Suite: ERP5
Revision: 33185
Result: FAIL

All tests: 3302
Failures: 104
Errors: 38
Skips: 80

The following tests failed:

  testAccountingRules                                (20 failures)
   test_04_SimpleInvoice (testAccountingRules.TestSaleAccountingRules), Simple Invoice.
   test_04b_SimpleInvoiceConfirm (testAccountingRules.TestSaleAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
   test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 lines.
   test_04d_SimpleInvoiceTwoCells (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 cells.
   test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestSaleAccountingRules), Add a new line then updateAppliedRule.
   test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestSaleAccountingRules), Tests that editing a line updates simulation correctly
   test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestSaleAccountingRules), Tests that removing a line updates simulation correctly
   test_05d_SimpleInvoiceReExpandCreateCell (testAccountingRules.TestSaleAccountingRules), Tests that replacing a line by cells updates simulation correctly
   test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestSaleAccountingRules), Tests that updating an applied rule many times doesn't break the
   test_06_MultiLineInvoice (testAccountingRules.TestSaleAccountingRules), Multiple lines invoice.
   test_04_SimpleInvoice (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice.
   test_04b_SimpleInvoiceConfirm (testAccountingRules.TestPurchaseAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
   test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 lines.
   test_04d_SimpleInvoiceTwoCells (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 cells.
   test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestPurchaseAccountingRules), Add a new line then updateAppliedRule.
   test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestPurchaseAccountingRules), Tests that editing a line updates simulation correctly
   test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestPurchaseAccountingRules), Tests that removing a line updates simulation correctly
   test_05d_SimpleInvoiceReExpandCreateCell (testAccountingRules.TestPurchaseAccountingRules), Tests that replacing a line by cells updates simulation correctly
   test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestPurchaseAccountingRules), Tests that updating an applied rule many times doesn't break the
   test_06_MultiLineInvoice (testAccountingRules.TestPurchaseAccountingRules), Multiple lines invoice.

  testAdvancedInvoicing                              (12 failures)
   test_02_InvoiceDeletePackingListLine (testAdvancedInvoicing.TestAdvancedSaleInvoice)
   test_03_InvoiceDecreaseQuantity (testAdvancedInvoicing.TestAdvancedSaleInvoice)
   test_04_InvoiceChangeStartDateFail (testAdvancedInvoicing.TestAdvancedSaleInvoice)
   test_05_AcceptDecisionOnPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
   test_06_AcceptDecisionOnPackingListAndInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
   test_07_SplitAndDeferInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
   test_08_AcceptDecisionOnInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
   test_10_ManuallyAddedMovements (testAdvancedInvoicing.TestAdvancedSaleInvoice)
   test_11_ManuallyAddedMovementsManyTransactions (testAdvancedInvoicing.TestAdvancedSaleInvoice)
   test_12_compareInvoiceAndPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
   test_CreatingAccountingTransactionThroughInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice), test creating simple invoice and accounting transaction
   test_CreatingAccountingTransactionThroughInvoice (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), test creating simple invoice and accounting transaction

  testBusinessTemplate                               (1 failures, 1 errors)
   test_165_checkCopyBuildInstall (testBusinessTemplate.TestBusinessTemplate)
   test_164_checkCopyBuild (testBusinessTemplate.TestBusinessTemplate)

  testCRM                                            (1 failures)
   test_Base_getEntityListFromFromHeader (testCRM.TestCRMMailIngestion)

  testConversionInSimulation                         (1 failures, 4 errors)
   test_01_diverged_purchase_packing_list_source_total_asset_price (testConversionInSimulation.TestConversionInSimulation)
   test_01_diverged_sale_packing_list_destination_total_asset_price (testConversionInSimulation.TestConversionInSimulation)
   test_01_simulation_movement_destination_asset_price (testConversionInSimulation.TestConversionInSimulation)
   test_01_simulation_movement_source_asset_price (testConversionInSimulation.TestConversionInSimulation)
   test_01_delivery_mode_on_sale_packing_list_and_invoice (testConversionInSimulation.TestConversionInSimulation)

  testDeliveryBuilderToSupportMultipleLines          (4 failures)
   test_01_IfNested (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
   test_02_AdoptingPrevision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
   test_03_AcceptingDecision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
   test_04_MergingMultipleSaleOrders (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)

  testDivergenceTester                               (5 errors)
   test_01_QuantityDivergenceTester (testDivergenceTester.TestDivergenceTester)

  testERP5Catalog                                    (1 errors, 3 skips)
   test_56_ActivateDuringClearCatalog (testERP5Catalog.TestERP5Catalog)

  testERP5Interfaces                                 (20 errors)
   test_Products.ERP5.AggregatedAmountList_AggregatedAmountList_implements_IAmountList (testERP5Interfaces.TestERP5Interfaces)
   test_Products.ERP5Type.Document.BusinessPath_BusinessPath_implements_IBusinessPath (testERP5Interfaces.TestERP5Interfaces)
   test_Products.ERP5Type.Document.BusinessPath_BusinessPath_implements_ICategoryAccessProvider (testERP5Interfaces.TestERP5Interfaces)
   test_Products.ERP5Type.Document.Document_Document_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
   test_Products.ERP5Type.Document.EmailDocument_EmailDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
   test_Products.ERP5Type.Document.Event_Event_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
   test_Products.ERP5Type.Document.File_File_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
   test_Products.ERP5Type.Document.Image_Image_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
   test_Products.ERP5Type.Document.OOoDocument_OOoDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
   test_Products.ERP5Type.Document.TextDocument_TextDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
   test_Products.ERP5Type.Document.TradeCondition_TradeCondition_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
   test_Products.ERP5Type.Document.TradeModelCell_TradeModelCell_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
   test_Products.ERP5Type.Document.TradeModelCell_TradeModelCell_implements_IVariated (testERP5Interfaces.TestERP5Interfaces)
   test_Products.ERP5Type.Document.TradeModelLine_TradeModelLine_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
   test_Products.ERP5Type.Document.TradeModelLine_TradeModelLine_implements_IVariated (testERP5Interfaces.TestERP5Interfaces)
   test_Products.ERP5Type.Document.TradeModelRule_TradeModelRule_implements_IRule (testERP5Interfaces.TestERP5Interfaces)
   test_Products.ERP5Type.Document.TransformationRule_TransformationRule_implements_IRule (testERP5Interfaces.TestERP5Interfaces)
   test_Products.ERP5Type.Document.Transformation_Transformation_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
   test_Products.ERP5Type.Document.Transformation_Transformation_implements_IVariated (testERP5Interfaces.TestERP5Interfaces)
   test_Products.ERP5Type.Document.TransformedResource_TransformedResource_implements_IVariated (testERP5Interfaces.TestERP5Interfaces)

  testERP5TypeInterfaces                             (1 errors)
   test_Products.ERP5Type.ConsistencyMessage_ConsistencyMessage_implements_IConsistencyMessage (testERP5TypeInterfaces.TestERP5TypeInterfaces)

  testFormPrintoutAsODT                              (1 failures, 1 skips)
   test_02_Table_07_CellFormat (testFormPrintoutAsODT.TestFormPrintoutAsODT), 7. Normal case: cell format cetting

  testICal                                           (1 failures)
   test_01_renderEvent (testICal.TestICal)

  testInvoice                                        (22 failures, 2 errors)
   test_invoice_transaction_line_resource (testInvoice.TestSaleInvoice)
   test_invoice_transaction_line_resource (testInvoice.TestPurchaseInvoice)
   test_01_SimpleInvoice (testInvoice.TestSaleInvoice)
   test_02_TwoInvoicesFromTwoPackingList (testInvoice.TestSaleInvoice)
   test_03_InvoiceEditAndInvoiceRule (testInvoice.TestSaleInvoice)
   test_05_InvoiceEditPackingListLine (testInvoice.TestSaleInvoice)
   test_06_InvoiceDeletePackingListLine (testInvoice.TestSaleInvoice)
   test_07_InvoiceAddPackingListLine (testInvoice.TestSaleInvoice)
   test_08_InvoiceDecreaseQuantity (testInvoice.TestSaleInvoice)
   test_09_InvoiceChangeStartDateFail (testInvoice.TestSaleInvoice)
   test_09b_InvoiceChangeStartDateSucceed (testInvoice.TestSaleInvoice)
   test_10_AcceptDecisionOnPackingList (testInvoice.TestSaleInvoice)
   test_11_AcceptDecisionOnPackingListAndInvoice (testInvoice.TestSaleInvoice)
   test_12_SplitPackingListAndAcceptInvoice (testInvoice.TestSaleInvoice)
   test_13_SplitAndDeferInvoice (testInvoice.TestSaleInvoice)
   test_14_AcceptDecisionOnInvoice (testInvoice.TestSaleInvoice)
   test_16_ManuallyAddedMovements (testInvoice.TestSaleInvoice)
   test_16a_ManuallyAddedMovementsManyTransactions (testInvoice.TestSaleInvoice)
   test_17_ManuallyAddedWrongMovements (testInvoice.TestSaleInvoice)
   test_18_compareInvoiceAndPackingList (testInvoice.TestSaleInvoice)
   test_delivery_mode_and_incoterm_on_invoice (testInvoice.TestSaleInvoice)
   test_modify_planned_order_invoice_transaction_rule (testInvoice.TestSaleInvoice)
   test_delivery_mode_and_incoterm_on_invoice (testInvoice.TestPurchaseInvoice)
   test_modify_planned_order_invoice_transaction_rule (testInvoice.TestPurchaseInvoice)

  testItem                                           (2 errors)
   test_01_ItemSimpleTest (testItem.TestItem)
   test_02_ItemWithInvoice (testItem.TestItem)

  testLegacyOrder                                    (1 failures)
   test_order_payment_condition_not_copied (testLegacyOrder.TestOrder)

  testNotificationMessageModule                      (4 failures)
   test_safe_substitution_content (testNotificationMessageModule.TestNotificationMessageModule), Tests that 'safe' substitution is performed, unless safe_substitute is
   test_substitution_content (testNotificationMessageModule.TestNotificationMessageModule), Tests that content and subject have string.Template based substitutions
   test_substitution_content_and_convert (testNotificationMessageModule.TestNotificationMessageModule), Tests that substitution also works with different target format.
   test_substitution_content_parameters (testNotificationMessageModule.TestNotificationMessageModule), Tests that we can pass parameters to convert to the substitution method,

  testOpenOrder                                      (2 failures)
   testOpenOrderRule (testOpenOrder.TestOpenOrder)
   testPeriodicityDateList (testOpenOrder.TestOpenOrder)

  testOrder                                          (1 failures)
   test_order_payment_condition_not_copied (testOrder.TestOrder)

  testPayroll                                        (1 failures, 1 errors)
   test_NetSalaryReport (testPayroll.TestPayroll)
   test_AccountingLineGeneration (testPayroll.TestPayroll)

  testPayroll_l10n_fr                                (1 failures)
   test_01_getYearToDateSlice (testPayroll_l10n_fr.TestPayroll_l10n_fr), Check that is possible to calculate the total amount spend on a slice

  testProductionPackingListApparel                   (1 failures)
   test_01_sourcingDelivery (testProductionPackingListApparel.TestProductionDeliveryApparel)

  testProxyField                                     (1 failures)
   testSkinSelectionTemplateField (testProxyField.TestProxyField)

  testPurchaseOrder                                  (1 failures)
   test_order_payment_condition_not_copied (testPurchaseOrder.TestPurchaseOrder)

  testResource                                       (1 errors)
   test_sourceDestinationReferenceOnSupplyLineOnDefaultSupplyLine (testResource.TestResource), Check that it's possible to set and get a source/destination_reference

  testSerializeForm                                  (1 failures)
   test checking if the field values are of the proper type.

  testTaxLineTradeCondition                          (6 failures)
   test_tax_line_build_accounting (testTaxLineTradeCondition.TestTaxLineOrderSimulationSaleOrder)
   test_tax_line_simulation (testTaxLineTradeCondition.TestTaxLineOrderSimulationSaleOrder)
   test_tax_line_build_accounting (testTaxLineTradeCondition.TestTaxLineOrderSimulationPurchaseOrder)
   test_tax_line_simulation (testTaxLineTradeCondition.TestTaxLineOrderSimulationPurchaseOrder)
   test_tax_line_simulation (testTaxLineTradeCondition.TestTaxLineInvoiceSimulationPurchaseInvoice)
   test_tax_line_simulation (testTaxLineTradeCondition.TestTaxLineInvoiceSimulationSaleInvoice)

  testTemplate                                       (2 failures)
   test_NonDeliveryTemplateNotIndexable (testTemplate.TestTemplate)
   test_manyTemplatesWithoutReindexation (testTemplate.TestTemplate), Check what happen when templates are created one by one without reindexation

  testTradeModelLine                                 (6 failures)
   test_BuildTradeModelLineAndAccountingFromInvoice (testTradeModelLine.TestTradeModelLineSale)
   test_BuildTradeModelLineAndAccountingFromOrder (testTradeModelLine.TestTradeModelLineSale)
   test_TradeModelRuleSimulationBuildInvoiceBuildInvoiceTransactionLines (testTradeModelLine.TestTradeModelLineSale), Check that having properly configured invoice transaction rule it invoice transaction lines are nicely generated and have proper amounts
   test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving (testTradeModelLine.TestTradeModelLineSale), Check that after changing invoice line invoice is properly diverged and it is possible to solve
   test_TradeModelRuleSimulationBuildInvoiceNewInvoiceLineSupport (testTradeModelLine.TestTradeModelLineSale), Check how is supported addition of invoice line to invoice build from order
   test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio (testTradeModelLine.TestTradeModelLineSale), Check building invoice after splitting packing list using different ratio

  testTradeModelLinePurchase                         (6 failures)
   test_BuildTradeModelLineAndAccountingFromInvoice (testTradeModelLinePurchase.TestTradeModelLinePurchase)
   test_BuildTradeModelLineAndAccountingFromOrder (testTradeModelLinePurchase.TestTradeModelLinePurchase)
   test_TradeModelRuleSimulationBuildInvoiceBuildInvoiceTransactionLines (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check that having properly configured invoice transaction rule it invoice transaction lines are nicely generated and have proper amounts
   test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check that after changing invoice line invoice is properly diverged and it is possible to solve
   test_TradeModelRuleSimulationBuildInvoiceNewInvoiceLineSupport (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check how is supported addition of invoice line to invoice build from order
   test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check building invoice after splitting packing list using different ratio

  testTradeReports                                   (2 failures)
   testStockReport (testTradeReports.TestTradeReports)
   testStockReportWithPositiveOrNegativeOrZeroStock (testTradeReports.TestTradeReports)

  testXHTML                                          (5 failures)
   test_configurationOfFieldLibrary (testXHTML.TestXHTML)
   test_deadProxyFields (testXHTML.TestXHTML)
   test_erp5_dms_Drawing_OOoDocument_viewAsWeb (testXHTML.TestXHTML)
   test_erp5_dms_Presentation_OOoDocument_viewAsWeb (testXHTML.TestXHTML)
   test_listActionInListbox (testXHTML.TestXHTML)

The following tests were at least partly skipped:

  testBase                                           (3 skips)

  testERP5Simulation                                 (61 skips)

  testMRP                                            (4 skips)

  testSQLCachedWorklist                              (1 skips)

  testSelectionTool                                  (7 skips)

Attached traceback has been truncated to the first 5000 lines
-------------- next part --------------

FAIL: test_04_SimpleInvoice (testAccountingRules.TestSaleAccountingRules), Simple Invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1706, in test_04_SimpleInvoice
    self.playSequence("""
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateAccounts
      CreateEntities
      CreateCurrencies
      CreateProducts
      CreateInvoiceTransactionRule
      UpdateInvoiceTransactionRuleMatrix
      CreatePaymentRule
      UpdatePaymentRuleMatrix
      ValidateInvoiceTransaction
      CreateNotebookFranceCell
      Tic
      ClearSimulation
      ClearAccountingModule
      CreateSimpleInvoice
      PlanInvoice
      Tic
    > CheckFirstRuleIsApplied
      CheckPaymentRuleIsApplied
      ConfirmInvoice
      Tic
      CheckNoAccountingLinesBuiltYet
      StartInvoice
      Tic
      CheckAccountingLinesCoherantWithSimulation
      CheckAccountingLinesCreatedForSimpleInvoice
      CheckPaymentLinesCreatedForSimpleInvoice
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1133, in stepCheckFirstRuleIsApplied
    self.assertEquals( len(applied_rule_list), 2)
AssertionError: 1 != 2

FAIL: test_04b_SimpleInvoiceConfirm (testAccountingRules.TestSaleAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1745, in test_04b_SimpleInvoiceConfirm
    self.playSequence("""
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateAccounts
      CreateEntities
      CreateCurrencies
      CreateProducts
      CreateInvoiceTransactionRule
      UpdateInvoiceTransactionRuleMatrix
      CreatePaymentRule
      UpdatePaymentRuleMatrix
      ValidateInvoiceTransaction
      CreateNotebookFranceCell
      Tic
      ClearSimulation
      ClearAccountingModule
      CreateSimpleInvoice
      ConfirmInvoice
      Tic
      CheckNoAccountingLinesBuiltYet
      StartInvoice
      Tic
    > CheckAccountingLinesCreatedForSimpleInvoice
      CheckPaymentLinesCreatedForSimpleInvoice
      RebuildAndCheckNothingIsCreated
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1365, in stepCheckAccountingLinesCreatedForSimpleInvoice
    self.assertEquals(len(invoice_transaction_line_list), 3)
AssertionError: 0 != 3

FAIL: test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 lines.
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1782, in test_04c_SimpleInvoiceTwoLines
    self.playSequence("""
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateAccounts
      CreateEntities
      CreateCurrencies
      CreateProducts
      CreateInvoiceTransactionRule
      UpdateInvoiceTransactionRuleMatrix
      CreatePaymentRule
      UpdatePaymentRuleMatrix
      ValidateInvoiceTransaction
      CreateNotebookFranceCell
      Tic
      ClearSimulation
      ClearAccountingModule
      CreateSimpleInvoiceTwoLines
      ConfirmInvoice
      Tic
      CheckNoAccountingLinesBuiltYet
      StartInvoice
      Tic
    > CheckAccountingLinesCreatedForSimpleInvoice
      CheckPaymentLinesCreatedForSimpleInvoice
      RebuildAndCheckNothingIsCreated
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1365, in stepCheckAccountingLinesCreatedForSimpleInvoice
    self.assertEquals(len(invoice_transaction_line_list), 3)
AssertionError: 0 != 3

FAIL: test_04d_SimpleInvoiceTwoCells (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 cells.
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1819, in test_04d_SimpleInvoiceTwoCells
    self.playSequence("""
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateAccounts
      CreateEntities
      CreateCurrencies
      CreateProducts
      CreateInvoiceTransactionRule
      UpdateInvoiceTransactionRuleMatrix
      CreatePaymentRule
      UpdatePaymentRuleMatrix
      ValidateInvoiceTransaction
      CreateNotebookFranceCell
      Tic
      ClearSimulation
      ClearAccountingModule
      CreateSimpleInvoiceTwoCells
      ConfirmInvoice
      Tic
      CheckNoAccountingLinesBuiltYet
      StartInvoice
      Tic
    > CheckAccountingLinesCreatedForSimpleInvoice
      CheckPaymentLinesCreatedForSimpleInvoice
      RebuildAndCheckNothingIsCreated
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1365, in stepCheckAccountingLinesCreatedForSimpleInvoice
    self.assertEquals(len(invoice_transaction_line_list), 3)
AssertionError: 0 != 3

FAIL: test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestSaleAccountingRules), Add a new line then updateAppliedRule.
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1859, in test_05a_SimpleInvoiceReExpandAddLine
    self.playSequence("""
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateAccounts
      CreateEntities
      CreateCurrencies
      CreateProducts
      CreateInvoiceTransactionRule
      UpdateInvoiceTransactionRuleMatrix
      CreatePaymentRule
      UpdatePaymentRuleMatrix
      ValidateInvoiceTransaction
      CreateNotebookFranceCell
      Tic
      ClearSimulation
      ClearAccountingModule
      CreateEmptyInvoice
      PlanInvoice
      Tic
      AddInvoiceLine
      ConfirmInvoice
      Tic
      CheckNoAccountingLinesBuiltYet
      StartInvoice
      Tic
    > CheckAccountingLinesCreatedForSimpleInvoice
      CheckPaymentLinesCreatedForSimpleInvoice
      RebuildAndCheckNothingIsCreated
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1365, in stepCheckAccountingLinesCreatedForSimpleInvoice
    self.assertEquals(len(invoice_transaction_line_list), 3)
AssertionError: 0 != 3

FAIL: test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestSaleAccountingRules), Tests that editing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1897, in test_05b_SimpleInvoiceReExpandEditLine
    self.playSequence("""
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateAccounts
      CreateEntities
      CreateCurrencies
      CreateProducts
      CreateInvoiceTransactionRule
      UpdateInvoiceTransactionRuleMatrix
      CreatePaymentRule
      UpdatePaymentRuleMatrix
      ValidateInvoiceTransaction
      CreateNotebookFranceCell
      Tic
      ClearSimulation
      ClearAccountingModule
      CreateOtherSimpleInvoice
      PlanInvoice
      Tic
      EditInvoiceLine
      ConfirmInvoice
      Tic
      CheckNoAccountingLinesBuiltYet
      StartInvoice
      Tic
    > CheckAccountingLinesCreatedForSimpleInvoice
      CheckPaymentLinesCreatedForSimpleInvoice
      RebuildAndCheckNothingIsCreated
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1365, in stepCheckAccountingLinesCreatedForSimpleInvoice
    self.assertEquals(len(invoice_transaction_line_list), 3)
AssertionError: 0 != 3

FAIL: test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestSaleAccountingRules), Tests that removing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1935, in test_05c_SimpleInvoiceReExpandDeleteLine
    self.playSequence("""
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateAccounts
      CreateEntities
      CreateCurrencies
      CreateProducts
      CreateInvoiceTransactionRule
      UpdateInvoiceTransactionRuleMatrix
      CreatePaymentRule
      UpdatePaymentRuleMatrix
      ValidateInvoiceTransaction
      CreateNotebookFranceCell
      Tic
      ClearSimulation
      ClearAccountingModule
      CreateSimpleInvoice
      AddInvoiceLine
      PlanInvoice
      Tic
      DeleteInvoiceLine
      Tic
      ConfirmInvoice
      Tic
      CheckNoAccountingLinesBuiltYet
      StartInvoice
      Tic
    > CheckAccountingLinesCreatedForSimpleInvoice
      CheckPaymentLinesCreatedForSimpleInvoice
      RebuildAndCheckNothingIsCreated
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1365, in stepCheckAccountingLinesCreatedForSimpleInvoice
    self.assertEquals(len(invoice_transaction_line_list), 3)
AssertionError: 0 != 3

FAIL: test_05d_SimpleInvoiceReExpandCreateCell (testAccountingRules.TestSaleAccountingRules), Tests that replacing a line by cells updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1975, in test_05d_SimpleInvoiceReExpandCreateCell
    self.playSequence("""
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateAccounts
      CreateEntities
      CreateCurrencies
      CreateProducts
      CreateInvoiceTransactionRule
      UpdateInvoiceTransactionRuleMatrix
      CreatePaymentRule
      UpdatePaymentRuleMatrix
      ValidateInvoiceTransaction
      CreateNotebookFranceCell
      Tic
      ClearSimulation
      ClearAccountingModule
      CreateOtherSimpleInvoice
      PlanInvoice
      Tic
      AddCellsInInvoiceLine
      ConfirmInvoice
      Tic
      CheckNoAccountingLinesBuiltYet
      StartInvoice
      Tic
    > CheckAccountingLinesCreatedForSimpleInvoice
      CheckPaymentLinesCreatedForSimpleInvoice
      RebuildAndCheckNothingIsCreated
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1365, in stepCheckAccountingLinesCreatedForSimpleInvoice
    self.assertEquals(len(invoice_transaction_line_list), 3)
AssertionError: 0 != 3

FAIL: test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestSaleAccountingRules), Tests that updating an applied rule many times doesn't break the
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2044, in test_05e_SimpleInvoiceExpandManyTimes
    """, quiet=quiet )
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateAccounts
      CreateEntities
      CreateCurrencies
      CreateProducts
      CreateInvoiceTransactionRule
      UpdateInvoiceTransactionRuleMatrix
      CreatePaymentRule
      UpdatePaymentRuleMatrix
      ValidateInvoiceTransaction
      CreateNotebookFranceCell
      Tic
      ClearSimulation
      ClearAccountingModule
      CreateSimpleInvoice
      PlanInvoice
      Tic
      EditInvoiceLine
      UpdateAppliedRule
      Tic
      EditInvoiceLine
      UpdateAppliedRule
      Tic
      EditInvoiceLine
      UpdateAppliedRule
      Tic
      EditInvoiceLine
      UpdateAppliedRule
      Tic
      ConfirmInvoice
      Tic
      CheckNoAccountingLinesBuiltYet
      StartInvoice
      Tic
    > CheckAccountingLinesCreatedForSimpleInvoice
      CheckPaymentLinesCreatedForSimpleInvoice
      RebuildAndCheckNothingIsCreated
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1365, in stepCheckAccountingLinesCreatedForSimpleInvoice
    self.assertEquals(len(invoice_transaction_line_list), 3)
AssertionError: 0 != 3

FAIL: test_06_MultiLineInvoice (testAccountingRules.TestSaleAccountingRules), Multiple lines invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2058, in test_06_MultiLineInvoice
    self.playSequence("""
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateAccounts
      CreateEntities
      CreateCurrencies
      CreateProducts
      CreateInvoiceTransactionRule
      Tic
      UpdateInvoiceTransactionRuleMatrix
      ValidateInvoiceTransaction
      Tic
      CreateNotebookFranceCell
      CreateBareboneFranceCell
      Tic
      ClearSimulation
      ClearAccountingModule
      CreateMultiLineInvoice
      PlanInvoice
      ConfirmInvoice
      Tic
      CheckNoAccountingLinesBuiltYet
      StartInvoice
      Tic
    > CheckAccountingLinesCreatedForMultiLineInvoice
      CheckPaymentLinesCreatedForMultiLineInvoice
      RebuildAndCheckNothingIsCreated
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1447, in stepCheckAccountingLinesCreatedForMultiLineInvoice
    self.assertEquals(len(invoice_transaction_line_list), 4)
AssertionError: 0 != 4

FAIL: test_04_SimpleInvoice (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1706, in test_04_SimpleInvoice
    self.playSequence("""
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateAccounts
      CreateEntities
      CreateCurrencies
      CreateProducts
      CreateInvoiceTransactionRule
      UpdateInvoiceTransactionRuleMatrix
      CreatePaymentRule
      UpdatePaymentRuleMatrix
      ValidateInvoiceTransaction
      CreateNotebookFranceCell
      Tic
      ClearSimulation
      ClearAccountingModule
      CreateSimpleInvoice
      PlanInvoice
      Tic
    > CheckFirstRuleIsApplied
      CheckPaymentRuleIsApplied
      ConfirmInvoice
      Tic
      CheckNoAccountingLinesBuiltYet
      StartInvoice
      Tic
      CheckAccountingLinesCoherantWithSimulation
      CheckAccountingLinesCreatedForSimpleInvoice
      CheckPaymentLinesCreatedForSimpleInvoice
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1133, in stepCheckFirstRuleIsApplied
    self.assertEquals( len(applied_rule_list), 2)
AssertionError: 1 != 2

FAIL: test_04b_SimpleInvoiceConfirm (testAccountingRules.TestPurchaseAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1745, in test_04b_SimpleInvoiceConfirm
    self.playSequence("""
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateAccounts
      CreateEntities
      CreateCurrencies
      CreateProducts
      CreateInvoiceTransactionRule
      UpdateInvoiceTransactionRuleMatrix
      CreatePaymentRule
      UpdatePaymentRuleMatrix
      ValidateInvoiceTransaction
      CreateNotebookFranceCell
      Tic
      ClearSimulation
      ClearAccountingModule
      CreateSimpleInvoice
      ConfirmInvoice
      Tic
      CheckNoAccountingLinesBuiltYet
      StartInvoice
      Tic
    > CheckAccountingLinesCreatedForSimpleInvoice
      CheckPaymentLinesCreatedForSimpleInvoice
      RebuildAndCheckNothingIsCreated
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1365, in stepCheckAccountingLinesCreatedForSimpleInvoice
    self.assertEquals(len(invoice_transaction_line_list), 3)
AssertionError: 0 != 3

FAIL: test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 lines.
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1782, in test_04c_SimpleInvoiceTwoLines
    self.playSequence("""
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateAccounts
      CreateEntities
      CreateCurrencies
      CreateProducts
      CreateInvoiceTransactionRule
      UpdateInvoiceTransactionRuleMatrix
      CreatePaymentRule
      UpdatePaymentRuleMatrix
      ValidateInvoiceTransaction
      CreateNotebookFranceCell
      Tic
      ClearSimulation
      ClearAccountingModule
      CreateSimpleInvoiceTwoLines
      ConfirmInvoice
      Tic
      CheckNoAccountingLinesBuiltYet
      StartInvoice
      Tic
    > CheckAccountingLinesCreatedForSimpleInvoice
      CheckPaymentLinesCreatedForSimpleInvoice
      RebuildAndCheckNothingIsCreated
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1365, in stepCheckAccountingLinesCreatedForSimpleInvoice
    self.assertEquals(len(invoice_transaction_line_list), 3)
AssertionError: 0 != 3

FAIL: test_04d_SimpleInvoiceTwoCells (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 cells.
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1819, in test_04d_SimpleInvoiceTwoCells
    self.playSequence("""
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateAccounts
      CreateEntities
      CreateCurrencies
      CreateProducts
      CreateInvoiceTransactionRule
      UpdateInvoiceTransactionRuleMatrix
      CreatePaymentRule
      UpdatePaymentRuleMatrix
      ValidateInvoiceTransaction
      CreateNotebookFranceCell
      Tic
      ClearSimulation
      ClearAccountingModule
      CreateSimpleInvoiceTwoCells
      ConfirmInvoice
      Tic
      CheckNoAccountingLinesBuiltYet
      StartInvoice
      Tic
    > CheckAccountingLinesCreatedForSimpleInvoice
      CheckPaymentLinesCreatedForSimpleInvoice
      RebuildAndCheckNothingIsCreated
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1365, in stepCheckAccountingLinesCreatedForSimpleInvoice
    self.assertEquals(len(invoice_transaction_line_list), 3)
AssertionError: 0 != 3

FAIL: test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestPurchaseAccountingRules), Add a new line then updateAppliedRule.
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1859, in test_05a_SimpleInvoiceReExpandAddLine
    self.playSequence("""
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateAccounts
      CreateEntities
      CreateCurrencies
      CreateProducts
      CreateInvoiceTransactionRule
      UpdateInvoiceTransactionRuleMatrix
      CreatePaymentRule
      UpdatePaymentRuleMatrix
      ValidateInvoiceTransaction
      CreateNotebookFranceCell
      Tic
      ClearSimulation
      ClearAccountingModule
      CreateEmptyInvoice
      PlanInvoice
      Tic
      AddInvoiceLine
      ConfirmInvoice
      Tic
      CheckNoAccountingLinesBuiltYet
      StartInvoice
      Tic
    > CheckAccountingLinesCreatedForSimpleInvoice
      CheckPaymentLinesCreatedForSimpleInvoice
      RebuildAndCheckNothingIsCreated
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1365, in stepCheckAccountingLinesCreatedForSimpleInvoice
    self.assertEquals(len(invoice_transaction_line_list), 3)
AssertionError: 0 != 3

FAIL: test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestPurchaseAccountingRules), Tests that editing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1897, in test_05b_SimpleInvoiceReExpandEditLine
    self.playSequence("""
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateAccounts
      CreateEntities
      CreateCurrencies
      CreateProducts
      CreateInvoiceTransactionRule
      UpdateInvoiceTransactionRuleMatrix
      CreatePaymentRule
      UpdatePaymentRuleMatrix
      ValidateInvoiceTransaction
      CreateNotebookFranceCell
      Tic
      ClearSimulation
      ClearAccountingModule
      CreateOtherSimpleInvoice
      PlanInvoice
      Tic
      EditInvoiceLine
      ConfirmInvoice
      Tic
      CheckNoAccountingLinesBuiltYet
      StartInvoice
      Tic
    > CheckAccountingLinesCreatedForSimpleInvoice
      CheckPaymentLinesCreatedForSimpleInvoice
      RebuildAndCheckNothingIsCreated
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1365, in stepCheckAccountingLinesCreatedForSimpleInvoice
    self.assertEquals(len(invoice_transaction_line_list), 3)
AssertionError: 0 != 3

FAIL: test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestPurchaseAccountingRules), Tests that removing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1935, in test_05c_SimpleInvoiceReExpandDeleteLine
    self.playSequence("""
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateAccounts
      CreateEntities
      CreateCurrencies
      CreateProducts
      CreateInvoiceTransactionRule
      UpdateInvoiceTransactionRuleMatrix
      CreatePaymentRule
      UpdatePaymentRuleMatrix
      ValidateInvoiceTransaction
      CreateNotebookFranceCell
      Tic
      ClearSimulation
      ClearAccountingModule
      CreateSimpleInvoice
      AddInvoiceLine
      PlanInvoice
      Tic
      DeleteInvoiceLine
      Tic
      ConfirmInvoice
      Tic
      CheckNoAccountingLinesBuiltYet
      StartInvoice
      Tic
    > CheckAccountingLinesCreatedForSimpleInvoice
      CheckPaymentLinesCreatedForSimpleInvoice
      RebuildAndCheckNothingIsCreated
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1365, in stepCheckAccountingLinesCreatedForSimpleInvoice
    self.assertEquals(len(invoice_transaction_line_list), 3)
AssertionError: 0 != 3

FAIL: test_05d_SimpleInvoiceReExpandCreateCell (testAccountingRules.TestPurchaseAccountingRules), Tests that replacing a line by cells updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1975, in test_05d_SimpleInvoiceReExpandCreateCell
    self.playSequence("""
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateAccounts
      CreateEntities
      CreateCurrencies
      CreateProducts
      CreateInvoiceTransactionRule
      UpdateInvoiceTransactionRuleMatrix
      CreatePaymentRule
      UpdatePaymentRuleMatrix
      ValidateInvoiceTransaction
      CreateNotebookFranceCell
      Tic
      ClearSimulation
      ClearAccountingModule
      CreateOtherSimpleInvoice
      PlanInvoice
      Tic
      AddCellsInInvoiceLine
      ConfirmInvoice
      Tic
      CheckNoAccountingLinesBuiltYet
      StartInvoice
      Tic
    > CheckAccountingLinesCreatedForSimpleInvoice
      CheckPaymentLinesCreatedForSimpleInvoice
      RebuildAndCheckNothingIsCreated
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1365, in stepCheckAccountingLinesCreatedForSimpleInvoice
    self.assertEquals(len(invoice_transaction_line_list), 3)
AssertionError: 0 != 3

FAIL: test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestPurchaseAccountingRules), Tests that updating an applied rule many times doesn't break the
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2044, in test_05e_SimpleInvoiceExpandManyTimes
    """, quiet=quiet )
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateAccounts
      CreateEntities
      CreateCurrencies
      CreateProducts
      CreateInvoiceTransactionRule
      UpdateInvoiceTransactionRuleMatrix
      CreatePaymentRule
      UpdatePaymentRuleMatrix
      ValidateInvoiceTransaction
      CreateNotebookFranceCell
      Tic
      ClearSimulation
      ClearAccountingModule
      CreateSimpleInvoice
      PlanInvoice
      Tic
      EditInvoiceLine
      UpdateAppliedRule
      Tic
      EditInvoiceLine
      UpdateAppliedRule
      Tic
      EditInvoiceLine
      UpdateAppliedRule
      Tic
      EditInvoiceLine
      UpdateAppliedRule
      Tic
      ConfirmInvoice
      Tic
      CheckNoAccountingLinesBuiltYet
      StartInvoice
      Tic
    > CheckAccountingLinesCreatedForSimpleInvoice
      CheckPaymentLinesCreatedForSimpleInvoice
      RebuildAndCheckNothingIsCreated
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1365, in stepCheckAccountingLinesCreatedForSimpleInvoice
    self.assertEquals(len(invoice_transaction_line_list), 3)
AssertionError: 0 != 3

FAIL: test_06_MultiLineInvoice (testAccountingRules.TestPurchaseAccountingRules), Multiple lines invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 2058, in test_06_MultiLineInvoice
    self.playSequence("""
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateAccounts
      CreateEntities
      CreateCurrencies
      CreateProducts
      CreateInvoiceTransactionRule
      Tic
      UpdateInvoiceTransactionRuleMatrix
      ValidateInvoiceTransaction
      Tic
      CreateNotebookFranceCell
      CreateBareboneFranceCell
      Tic
      ClearSimulation
      ClearAccountingModule
      CreateMultiLineInvoice
      PlanInvoice
      ConfirmInvoice
      Tic
      CheckNoAccountingLinesBuiltYet
      StartInvoice
      Tic
    > CheckAccountingLinesCreatedForMultiLineInvoice
      CheckPaymentLinesCreatedForMultiLineInvoice
      RebuildAndCheckNothingIsCreated
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1447, in stepCheckAccountingLinesCreatedForMultiLineInvoice
    self.assertEquals(len(invoice_transaction_line_list), 4)
AssertionError: 0 != 4

FAIL: test_02_InvoiceDeletePackingListLine (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 509, in test_02_InvoiceDeletePackingListLine
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      Tic
      SetContainerFullQuantity
      Tic
      CheckPackingListIsPacked
      DeletePackingListLine
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      Tic
      CheckInvoiceBuilding
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_03_InvoiceDecreaseQuantity (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 549, in test_03_InvoiceDecreaseQuantity
    self.playSequence(sequence, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      CheckInvoiceTransactionRule
      Tic
      CheckInvoiceBuilding
      DecreaseInvoiceLineQuantity
      CheckInvoiceIsDivergent
      CheckInvoiceIsCalculating
      Tic
      CheckInvoiceIsDiverged
      SplitAndDeferInvoice
      Tic
      CheckInvoiceIsNotDivergent
      CheckInvoiceIsSolved
      CheckInvoiceSplitted
      CheckPackingListIsNotDivergent
      CheckPackingListIsSolved
      CheckInvoiceTransactionRule
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_04_InvoiceChangeStartDateFail (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 584, in test_04_InvoiceChangeStartDateFail
    self.playSequence(sequence, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      CheckInvoiceTransactionRule
      Tic
      CheckInvoiceBuilding
      ChangeInvoiceStartDate
      CheckInvoiceIsDivergent
      CheckInvoiceIsCalculating
      Tic
      CheckInvoiceIsDiverged
      UnifyStartDateWithDecisionInvoice
      Tic
      CheckInvoiceNotSplitted
      CheckInvoiceIsNotDivergent
      CheckInvoiceIsSolved
      CheckPackingListIsDivergent
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_05_AcceptDecisionOnPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 650, in test_05_AcceptDecisionOnPackingList
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
    > CheckInvoicingRule
      DecreasePackingListLineQuantity
      SetContainerFullQuantity
      CheckPackingListIsCalculating
      Tic
      CheckPackingListIsDiverged
      AcceptDecisionQuantity
      Tic
      CheckPackingListIsSolved
      CheckPackingListNotSplitted
      SetReadyPackingList
      Tic
      StartPackingList
      CheckInvoicingRule
      CheckInvoiceTransactionRule
      Tic
      CheckInvoiceBuilding
      StopPackingList
      Tic
      DeliverPackingList
      Tic
      CheckPackingListIsNotDivergent
      CheckPackingListIsSolved
      CheckInvoiceTransactionRule
      StartInvoice
      Tic
      StopInvoice
      Tic
      DeliverInvoice
      Tic
      CheckInvoiceNotSplitted
      CheckInvoiceIsNotDivergent
      CheckInvoiceIsSolved
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_06_AcceptDecisionOnPackingListAndInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 736, in test_06_AcceptDecisionOnPackingListAndInvoice
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
    > CheckInvoicingRule
      DecreasePackingListLineQuantity
      SetContainerFullQuantity
      CheckPackingListIsCalculating
      Tic
      CheckPackingListIsDiverged
      AcceptDecisionQuantity
      Tic
      CheckPackingListIsSolved
      CheckPackingListNotSplitted
      SetReadyPackingList
      Tic
      StartPackingList
      CheckInvoicingRule
      CheckInvoiceTransactionRule
      Tic
      CheckInvoiceBuilding
      StopPackingList
      Tic
      DeliverPackingList
      Tic
      CheckPackingListIsNotDivergent
      CheckPackingListIsSolved
      CheckInvoiceTransactionRule
      IncreaseInvoiceLineQuantity
      Tic
      CheckInvoiceIsDiverged
      AcceptDecisionQuantityInvoice
      Tic
      CheckInvoiceIsNotDivergent
      CheckInvoiceIsSolved
      StartInvoice
      Tic
      StopInvoice
      Tic
      DeliverInvoice
      Tic
      CheckPackingListIsNotDivergent
      CheckPackingListIsSolved
      CheckInvoiceTransactionRule
      CheckInvoiceNotSplitted
      CheckInvoiceIsNotDivergent
      CheckInvoiceIsSolved
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_07_SplitAndDeferInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 806, in test_07_SplitAndDeferInvoice
    self.playSequence(sequence, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      CheckInvoiceTransactionRule
      Tic
      CheckInvoiceBuilding
      StopPackingList
      Tic
      DeliverPackingList
      Tic
      CheckPackingListIsSolved
      CheckPackingListNotSplitted
      DecreaseInvoiceLineQuantity
      CheckInvoiceIsDivergent
      CheckInvoiceIsCalculating
      Tic
      CheckInvoiceIsDiverged
      SplitAndDeferInvoice
      Tic
      StartInvoice
      Tic
      StopInvoice
      Tic
      DeliverInvoice
      Tic
      CheckInvoiceIsNotDivergent
      CheckInvoiceIsSolved
      CheckInvoiceSplitted
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
      CheckPackingListIsNotDivergent
      CheckPackingListIsSolved
      CheckInvoiceTransactionRule
      SwitchInvoices
      StartInvoice
      Tic
      StopInvoice
      Tic
      DeliverInvoice
      Tic
      CheckInvoiceIsNotDivergent
      CheckInvoiceIsSolved
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_08_AcceptDecisionOnInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 874, in test_08_AcceptDecisionOnInvoice
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      CheckInvoiceTransactionRule
      Tic
      CheckInvoiceBuilding
      StopPackingList
      Tic
      DeliverPackingList
      Tic
      CheckPackingListIsSolved
      CheckPackingListNotSplitted
      DecreaseInvoiceLineQuantity
      CheckInvoiceIsDivergent
      CheckInvoiceIsCalculating
      Tic
      CheckInvoiceIsDiverged
      AcceptDecisionQuantityInvoice
      Tic
      StartInvoice
      Tic
      StopInvoice
      Tic
      DeliverInvoice
      Tic
      CheckPackingListIsNotDivergent
      CheckPackingListIsSolved
      CheckInvoiceTransactionRule
      CheckInvoiceNotSplitted
      CheckInvoiceIsNotDivergent
      CheckInvoiceIsSolved
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_10_ManuallyAddedMovements (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 928, in test_10_ManuallyAddedMovements
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      Tic
      CheckInvoiceBuilding
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
      StartInvoice
      Tic
      AddInvoiceTransactionLines
      Tic
      CheckSimulationTrees
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_11_ManuallyAddedMovementsManyTransactions (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 962, in test_11_ManuallyAddedMovementsManyTransactions
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      Tic
      CheckInvoiceBuilding
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
      Tic
      CheckInvoiceIsSolved
      StartInvoice
      Tic
      AddInvoiceLinesManyTransactions
      Tic
      CheckSimulationTrees
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_12_compareInvoiceAndPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 984, in test_12_compareInvoiceAndPackingList
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      Tic
      CheckInvoiceBuilding
      CheckInvoicesConsistency
      CheckPackingListInvoice
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_CreatingAccountingTransactionThroughInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice), test creating simple invoice and accounting transaction
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 273, in test_CreatingAccountingTransactionThroughInvoice
    self.assertNotEquals(invoice_transaction, None)
AssertionError: None == None

FAIL: test_CreatingAccountingTransactionThroughInvoice (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), test creating simple invoice and accounting transaction
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 273, in test_CreatingAccountingTransactionThroughInvoice
    self.assertNotEquals(invoice_transaction, None)
AssertionError: None == None

ERROR: test_165_checkCopyBuildInstall (testBusinessTemplate.TestBusinessTemplate)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 5909, in test_165_checkCopyBuildInstall
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      UseCoreBusinessTemplate
      CopyCoreBusinessTemplate
      BuildCopyCoreBusinessTemplate
    > InstallCopyCoreBusinessTemplate
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 219, in stepInstallCopyCoreBusinessTemplate
    bt.install()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Base.py", line 237, in __call__
    result = apply(self.__dict__['_m'], (instance,) + args, kw)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 5203, in install
    return self._install(**kw)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 5139, in _install
    trashbin=trashbin, installed_bt=installed_bt)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 1831, in install
    for wf_id in self._objects[path].split(', '):
AttributeError: 'list' object has no attribute 'split'

FAIL: test_164_checkCopyBuild (testBusinessTemplate.TestBusinessTemplate)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 5893, in test_164_checkCopyBuild
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      UseCoreBusinessTemplate
      CopyCoreBusinessTemplate
      BuildCopyCoreBusinessTemplate
    > CheckOriginalAndCopyBusinessTemplate
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 233, in stepCheckOriginalAndCopyBusinessTemplate
    self.assertEquals(original_obj.getKeys(), copy_obj.getKeys())
AssertionError: ['StandardSecurity', 'DocumentExtraction'] != ['ExtensionTemplateItem/StandardSecurity', 'ExtensionTemplateItem/DocumentExtraction']

FAIL: test_Base_getEntityListFromFromHeader (testCRM.TestCRMMailIngestion)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testCRM.py", line 452, in test_Base_getEntityListFromFromHeader
    '%r should return %r, but returned %r' %
AssertionError: '"me at erp5.org,sender at customer.com," <he at erp5.org>' should return ['person_module/he'], but returned ['person_module/sender', 'person_module/he']

ERROR: test_01_diverged_purchase_packing_list_source_total_asset_price (testConversionInSimulation.TestConversionInSimulation)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testConversionInSimulation.py", line 698, in test_01_diverged_purchase_packing_list_source_total_asset_price
    invoice_transaction_movement =\
IndexError: list index out of range

ERROR: test_01_diverged_sale_packing_list_destination_total_asset_price (testConversionInSimulation.TestConversionInSimulation)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testConversionInSimulation.py", line 595, in test_01_diverged_sale_packing_list_destination_total_asset_price
    invoice_transaction_movement =\
IndexError: list index out of range

ERROR: test_01_simulation_movement_destination_asset_price (testConversionInSimulation.TestConversionInSimulation)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testConversionInSimulation.py", line 304, in test_01_simulation_movement_destination_asset_price
    invoice_transaction_movement_1 =\
IndexError: list index out of range

ERROR: test_01_simulation_movement_source_asset_price (testConversionInSimulation.TestConversionInSimulation)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testConversionInSimulation.py", line 397, in test_01_simulation_movement_source_asset_price
    invoice_transaction_movement =\
IndexError: list index out of range

FAIL: test_01_delivery_mode_on_sale_packing_list_and_invoice (testConversionInSimulation.TestConversionInSimulation)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testConversionInSimulation.py", line 775, in test_01_delivery_mode_on_sale_packing_list_and_invoice
    order.getDeliveryMode())
AssertionError: None != 'by_mail'

FAIL: test_01_IfNested (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testDeliveryBuilderToSupportMultipleLines.py", line 227, in test_01_IfNested
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      UpdateBuilderForMultipleLineList
      SetPythonScriptForDeliveryBuilder
      StartPackingList
    > CheckInvoicingRule
      Tic
      GetRelatedInvoiceFromPackingList
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_02_AdoptingPrevision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testDeliveryBuilderToSupportMultipleLines.py", line 267, in test_02_AdoptingPrevision
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      UpdateBuilderForMultipleLineList
      SetPythonScriptForDeliveryBuilder
      StartPackingList
    > CheckInvoicingRule
      Tic
      GetRelatedInvoiceFromPackingList
      UpdatePackingList
      Tic
      AcceptDecisionPackingListQuantity
      Tic
      CheckInvoiceIsDivergent
      CheckInvoiceIsDiverged
      AdoptPrevisionInvoiceQuantity
      Tic
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_03_AcceptingDecision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testDeliveryBuilderToSupportMultipleLines.py", line 304, in test_03_AcceptingDecision
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      UpdateBuilderForMultipleLineList
      SetPythonScriptForDeliveryBuilder
      StartPackingList
    > CheckInvoicingRule
      Tic
      GetRelatedInvoiceFromPackingList
      UpdateInvoice
      Tic
      CheckInvoiceIsDivergent
      AcceptDecisionInvoiceQuantity
      Tic
      CheckInvoiceIsNotDivergent
      CheckPackingListIsDivergent
      AdoptPrevisionPackingListQuantity
      Tic
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_04_MergingMultipleSaleOrders (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testDeliveryBuilderToSupportMultipleLines.py", line 361, in test_04_MergingMultipleSaleOrders
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      UpdateBuilderForMultipleLineList
      SetPythonScriptForDeliveryBuilder
      StartPackingList
    > CheckInvoicingRule
      Tic
      GetRelatedInvoiceFromPackingList
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      Tic
      CreateOrderLine
      SetOrderLineResource
      UpdateOrder
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetFillContainerLine
      Tic
      SetReadyPackingList
      Tic
      StartPackingList
      CheckInvoicingRule
      Tic
      CheckInvoiceIsDivergent
      AdoptPrevisionInvoiceQuantity
      Tic
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

ERROR: test_01_QuantityDivergenceTester (testDivergenceTester.TestDivergenceTester)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 136, in run
    self.setUp()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 510, in setUp
    erp5_catalog_storage=erp5_catalog_storage)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 988, in setUpERP5Site
    setup_once()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testDivergenceTester.py", line 92, in setUpOnce
    self.bootstrapSite()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testDivergenceTester.py", line 83, in bootstrapSite
    sequence_list.play(self, quiet=self.quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
    > RemoveDivergenceTesters
      CreateOrganisation1
      CreateOrganisation2
      CreateOrganisation3
      CreateOrder
      SetOrderProfile
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      ConfirmOrder
      Tic
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testDivergenceTester.py", line 54, in stepRemoveDivergenceTesters
    rule.manage_delObjects(
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/CopySupport.py", line 224, in manage_delObjects
    ob=self.getPortalObject().portal_catalog.getObject(uid)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ZSQLCatalog/ZSQLCatalog.py", line 948, in getobject
    path = self.getpath(uid, sql_catalog_id=sql_catalog_id)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ZSQLCatalog/ZSQLCatalog.py", line 926, in getpath
    object = catalog[uid]
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ZSQLCatalog/SQLCatalog.py", line 860, in __getitem__
    raise KeyError, uid
KeyError: 15L

ERROR: test_56_ActivateDuringClearCatalog (testERP5Catalog.TestERP5Catalog)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Catalog/tests/testERP5Catalog.py", line 1983, in test_56_ActivateDuringClearCatalog
    '*args,**kw', script_content)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/utils.py", line 173, in createZODBPythonScript
    script = container[script_id]
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ZSQLCatalog/SQLCatalog.py", line 857, in __getitem__
    search_result = method(uid = uid)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/patches/DA.py", line 199, in DA__call__
    try:     query=apply(self.template, (p,), argdata)
  File "/usr/lib/erp5/lib/python/DocumentTemplate/DT_String.py", line 476, in __call__
    try: result = render_blocks(self._v_blocks, md)
  File "/usr/lib/erp5/lib/python/Shared/DC/ZRDB/sqltest.py", line 151, in render
    raise ValueError, (
ValueError: Invalid integer value for <em>uid</em>

ERROR: test_Products.ERP5.AggregatedAmountList_AggregatedAmountList_implements_IAmountList (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
    verifyClass(Interface, Klass)
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
    return _verify(iface, candidate, tentative, vtype='c')
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
    raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IAmountList.IAmountList>

ERROR: test_Products.ERP5Type.Document.BusinessPath_BusinessPath_implements_IBusinessPath (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
    verifyClass(Interface, Klass)
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
    return _verify(iface, candidate, tentative, vtype='c')
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
    raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IBusinessPath.IBusinessPath>

        The getExpectedCompletionDuration attribute was not provided.

ERROR: test_Products.ERP5Type.Document.BusinessPath_BusinessPath_implements_ICategoryAccessProvider (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
    verifyClass(Interface, Klass)
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
    return _verify(iface, candidate, tentative, vtype='c')
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 85, in _verify
    raise BrokenMethodImplementation(n, mess)
BrokenMethodImplementation: The implementation of _getAcquiredCategoryMembershipList violates its contract
        because implementation doesn't allow enough arguments.

ERROR: test_Products.ERP5Type.Document.Document_Document_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
    verifyClass(Interface, Klass)
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
    return _verify(iface, candidate, tentative, vtype='c')
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
    raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>

ERROR: test_Products.ERP5Type.Document.EmailDocument_EmailDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
    verifyClass(Interface, Klass)
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
    return _verify(iface, candidate, tentative, vtype='c')
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
    raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>

ERROR: test_Products.ERP5Type.Document.Event_Event_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
    verifyClass(Interface, Klass)
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
    return _verify(iface, candidate, tentative, vtype='c')
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
    raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>

ERROR: test_Products.ERP5Type.Document.File_File_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
    verifyClass(Interface, Klass)
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
    return _verify(iface, candidate, tentative, vtype='c')
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
    raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>

ERROR: test_Products.ERP5Type.Document.Image_Image_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
    verifyClass(Interface, Klass)
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
    return _verify(iface, candidate, tentative, vtype='c')
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
    raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>

ERROR: test_Products.ERP5Type.Document.OOoDocument_OOoDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
    verifyClass(Interface, Klass)
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
    return _verify(iface, candidate, tentative, vtype='c')
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
    raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>

ERROR: test_Products.ERP5Type.Document.TextDocument_TextDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
    verifyClass(Interface, Klass)
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
    return _verify(iface, candidate, tentative, vtype='c')
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
    raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>

ERROR: test_Products.ERP5Type.Document.TradeCondition_TradeCondition_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
    verifyClass(Interface, Klass)
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
    return _verify(iface, candidate, tentative, vtype='c')
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
    raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IAmountGenerator.IAmountGenerator>

        The getGeneratedAmountList attribute was not provided.

ERROR: test_Products.ERP5Type.Document.TradeModelCell_TradeModelCell_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
    verifyClass(Interface, Klass)
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
    return _verify(iface, candidate, tentative, vtype='c')
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
    raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IAmountGenerator.IAmountGenerator>

        The getGeneratedAmountList attribute was not provided.

ERROR: test_Products.ERP5Type.Document.TradeModelCell_TradeModelCell_implements_IVariated (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
    verifyClass(Interface, Klass)
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
    return _verify(iface, candidate, tentative, vtype='c')
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 85, in _verify
    raise BrokenMethodImplementation(n, mess)
BrokenMethodImplementation: The implementation of setVariationCategoryList violates its contract
        because implementation doesn't allow enough arguments.

ERROR: test_Products.ERP5Type.Document.TradeModelLine_TradeModelLine_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
    verifyClass(Interface, Klass)
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
    return _verify(iface, candidate, tentative, vtype='c')
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
    raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IAmountGenerator.IAmountGenerator>

        The getGeneratedAmountList attribute was not provided.

ERROR: test_Products.ERP5Type.Document.TradeModelLine_TradeModelLine_implements_IVariated (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
    verifyClass(Interface, Klass)
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
    return _verify(iface, candidate, tentative, vtype='c')
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 85, in _verify
    raise BrokenMethodImplementation(n, mess)
BrokenMethodImplementation: The implementation of setVariationCategoryList violates its contract
        because implementation doesn't allow enough arguments.

ERROR: test_Products.ERP5Type.Document.TradeModelRule_TradeModelRule_implements_IRule (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
    verifyClass(Interface, Klass)
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
    return _verify(iface, candidate, tentative, vtype='c')
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
    raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IRule.IRule>

        The updateMovementCollection attribute was not provided.

ERROR: test_Products.ERP5Type.Document.TransformationRule_TransformationRule_implements_IRule (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
    verifyClass(Interface, Klass)
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
    return _verify(iface, candidate, tentative, vtype='c')
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
    raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IRule.IRule>

        The updateMovementCollection attribute was not provided.

ERROR: test_Products.ERP5Type.Document.Transformation_Transformation_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
    verifyClass(Interface, Klass)
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
    return _verify(iface, candidate, tentative, vtype='c')
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
    raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IAmountGenerator.IAmountGenerator>

        The getGeneratedAmountList attribute was not provided.

ERROR: test_Products.ERP5Type.Document.Transformation_Transformation_implements_IVariated (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
    verifyClass(Interface, Klass)
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
    return _verify(iface, candidate, tentative, vtype='c')
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 85, in _verify
    raise BrokenMethodImplementation(n, mess)
BrokenMethodImplementation: The implementation of getVariationRangeCategoryItemList violates its contract
        because implementation doesn't allow enough arguments.

ERROR: test_Products.ERP5Type.Document.TransformedResource_TransformedResource_implements_IVariated (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
    verifyClass(Interface, Klass)
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
    return _verify(iface, candidate, tentative, vtype='c')
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 85, in _verify
    raise BrokenMethodImplementation(n, mess)
BrokenMethodImplementation: The implementation of setVariationCategoryList violates its contract
        because implementation doesn't allow enough arguments.

ERROR: test_Products.ERP5Type.ConsistencyMessage_ConsistencyMessage_implements_IConsistencyMessage (testERP5TypeInterfaces.TestERP5TypeInterfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
    verifyClass(Interface, Klass)
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
    return _verify(iface, candidate, tentative, vtype='c')
  File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
    raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass Products.ERP5Type.interfaces.consistency_message.IConsistencyMessage>

        The fix attribute was not provided.

FAIL: test_02_Table_07_CellFormat (testFormPrintoutAsODT.TestFormPrintoutAsODT), 7. Normal case: cell format cetting
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5OOo/tests/testFormPrintoutAsODT.py", line 633, in test_02_Table_07_CellFormat
    self.assertEqual(date_column.attrib[date_value_attrib], '2009-04-20')
AssertionError: '2009-04-19' != '2009-04-20'

FAIL: test_01_renderEvent (testICal.TestICal)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testICal.py", line 151, in test_01_renderEvent
    self.assertEquals( # if this fail for you, try to set $TZ to Europe/Paris
AssertionError: '20070815T143000Z' != '20070815T083000Z'

ERROR: test_invoice_transaction_line_resource (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 1416, in test_invoice_transaction_line_resource
    invoice_transaction_movement =\
IndexError: list index out of range

ERROR: test_invoice_transaction_line_resource (testInvoice.TestPurchaseInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 1416, in test_invoice_transaction_line_resource
    invoice_transaction_movement =\
IndexError: list index out of range

FAIL: test_01_SimpleInvoice (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2778, in test_01_SimpleInvoice
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      Tic
      CheckInvoiceBuilding
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
      CheckInvoiceLineHasReferenceAndIntIndex
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_02_TwoInvoicesFromTwoPackingList (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2810, in test_02_TwoInvoicesFromTwoPackingList
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      DecreasePackingListLineQuantity
      CheckPackingListIsCalculating
      Tic
      CheckPackingListIsDiverged
      SplitAndDeferPackingList
      Tic
      CheckPackingListIsSolved
      CheckPackingListSplitted
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      DefineNewPackingListContainer
      Tic
      CheckNewPackingListIsPacked
      SetReadyPackingList
      SetReadyNewPackingList
      Tic
      StartPackingList
      StartNewPackingList
      Tic
      CheckTwoInvoices
      RemoveDateMovementGroupForTransactionBuilder
      StartTwoInvoices
      Tic
    > CheckTwoInvoicesTransactionLines
      CheckInvoicesConsistency
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 906, in stepCheckTwoInvoicesTransactionLines
    self.assertEquals(3,len(invoice.objectValues(
AssertionError: 3 != 0

FAIL: test_03_InvoiceEditAndInvoiceRule (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2841, in test_03_InvoiceEditAndInvoiceRule
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      Tic
      CheckInvoiceBuilding
      EditInvoice
      CheckInvoiceRuleNotAppliedOnInvoiceEdit
      CheckInvoicesConsistency
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_05_InvoiceEditPackingListLine (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2883, in test_05_InvoiceEditPackingListLine
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      EditPackingListLine
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      Tic
      CheckInvoiceBuilding
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_06_InvoiceDeletePackingListLine (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2907, in test_06_InvoiceDeletePackingListLine
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      Tic
      SetContainerFullQuantity
      Tic
      CheckPackingListIsPacked
      DeletePackingListLine
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      Tic
      CheckInvoiceBuilding
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_07_InvoiceAddPackingListLine (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2934, in test_07_InvoiceAddPackingListLine
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      AddPackingListLine
      SetContainerFullQuantity
      Tic
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      Tic
      CheckInvoiceBuilding
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_08_InvoiceDecreaseQuantity (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2973, in test_08_InvoiceDecreaseQuantity
    self.playSequence(sequence, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      CheckInvoiceTransactionRule
      Tic
      CheckInvoiceBuilding
      DecreaseInvoiceLineQuantity
      CheckInvoiceIsDivergent
      CheckInvoiceIsCalculating
      Tic
      CheckInvoiceIsDiverged
      SplitAndDeferInvoice
      Tic
      CheckInvoiceIsNotDivergent
      CheckInvoiceIsSolved
      CheckInvoiceSplitted
      CheckPackingListIsNotDivergent
      CheckPackingListIsSolved
      CheckInvoiceTransactionRule
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_09_InvoiceChangeStartDateFail (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 3007, in test_09_InvoiceChangeStartDateFail
    self.playSequence(sequence, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      CheckInvoiceTransactionRule
      Tic
      CheckInvoiceBuilding
      ChangeInvoiceStartDate
      CheckInvoiceIsDivergent
      CheckInvoiceIsCalculating
      Tic
      CheckInvoiceIsDiverged
      UnifyStartDateWithDecisionInvoice
      Tic
      CheckInvoiceNotSplitted
      CheckInvoiceIsNotDivergent
      CheckInvoiceIsSolved
      CheckPackingListIsDivergent
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_09b_InvoiceChangeStartDateSucceed (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 3051, in test_09b_InvoiceChangeStartDateSucceed
    self.playSequence(sequence, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      CheckInvoiceTransactionRule
      Tic
      CheckInvoiceBuilding
      StopPackingList
      Tic
      DeliverPackingList
      Tic
      ChangeInvoiceStartDate
      CheckInvoiceIsDivergent
      CheckInvoiceIsCalculating
      Tic
      CheckInvoiceIsDiverged
      UnifyStartDateWithDecisionInvoice
      Tic
      CheckInvoiceNotSplitted
      CheckInvoiceIsNotDivergent
      CheckInvoiceIsSolved
      CheckPackingListIsNotDivergent
      CheckPackingListIsSolved
      CheckInvoiceTransactionRule
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_10_AcceptDecisionOnPackingList (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 3118, in test_10_AcceptDecisionOnPackingList
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
    > CheckInvoicingRule
      DecreasePackingListLineQuantity
      SetContainerFullQuantity
      CheckPackingListIsCalculating
      Tic
      CheckPackingListIsDiverged
      AcceptDecisionQuantity
      Tic
      CheckPackingListIsSolved
      CheckPackingListNotSplitted
      SetReadyPackingList
      Tic
      StartPackingList
      CheckInvoicingRule
      CheckInvoiceTransactionRule
      Tic
      CheckInvoiceBuilding
      CheckPaymentBuilding
      StopPackingList
      Tic
      DeliverPackingList
      Tic
      CheckPackingListIsNotDivergent
      CheckPackingListIsSolved
      CheckInvoiceTransactionRule
      StartInvoice
      Tic
      CheckPaymentBuilding
      StopInvoice
      Tic
      DeliverInvoice
      Tic
      CheckInvoiceNotSplitted
      CheckInvoiceIsNotDivergent
      CheckInvoiceIsSolved
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_11_AcceptDecisionOnPackingListAndInvoice (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 3236, in test_11_AcceptDecisionOnPackingListAndInvoice
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
    > CheckInvoicingRule
      DecreasePackingListLineQuantity
      SetContainerFullQuantity
      CheckPackingListIsCalculating
      Tic
      CheckPackingListIsDiverged
      AcceptDecisionQuantity
      Tic
      CheckPackingListIsSolved
      CheckPackingListNotSplitted
      SetReadyPackingList
      Tic
      StartPackingList
      CheckInvoicingRule
      CheckInvoiceTransactionRule
      Tic
      CheckInvoiceBuilding
      StopPackingList
      Tic
      DeliverPackingList
      Tic
      CheckPackingListIsNotDivergent
      CheckPackingListIsSolved
      CheckInvoiceTransactionRule
      IncreaseInvoiceLineQuantity
      Tic
      CheckInvoiceIsDiverged
      AcceptDecisionQuantityInvoice
      Tic
      CheckInvoiceIsNotDivergent
      CheckInvoiceIsSolved
      StartInvoice
      Tic
      CheckPaymentBuilding
      StopInvoice
      Tic
      DeliverInvoice
      Tic
      CheckPackingListIsNotDivergent
      CheckPackingListIsSolved
      CheckInvoiceTransactionRule
      CheckInvoiceNotSplitted
      CheckInvoiceIsNotDivergent
      CheckInvoiceIsSolved
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_12_SplitPackingListAndAcceptInvoice (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 3350, in test_12_SplitPackingListAndAcceptInvoice
    self.playSequence(sequence, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
    > CheckInvoicingRule
      DecreasePackingListLineQuantity
      SetContainerFullQuantity
      CheckPackingListIsCalculating
      Tic
      CheckPackingListIsDiverged
      SplitAndDeferPackingList
      Tic
      CheckPackingListIsSolved
      CheckPackingListSplitted
      SetReadyPackingList
      Tic
      StartPackingList
      CheckInvoicingRule
      CheckInvoiceTransactionRule
      Tic
      CheckInvoiceBuilding
      StopPackingList
      Tic
      DeliverPackingList
      Tic
      CheckPackingListIsSolved
      CheckPackingListSplitted
      IncreaseInvoiceLineQuantity
      CheckInvoiceIsCalculating
      Tic
      CheckInvoiceIsDiverged
      AcceptDecisionQuantityInvoice
      Tic
      StartInvoice
      Tic
      CheckPaymentBuilding
      StopInvoice
      Tic
      DeliverInvoice
      Tic
      CheckInvoiceIsSolved
      CheckInvoiceNotSplitted
      CheckPackingListIsNotDivergent
      CheckPackingListIsSolved
      CheckInvoiceTransactionRule
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
      SwitchPackingLists
      AddPackingListContainer
      SetContainerFullQuantity
      Tic
      CheckPackingListIsSolved
      SetReadyPackingList
      Tic
      StartPackingList
      CheckInvoicingRule
      CheckInvoiceTransactionRule
      Tic
      CheckInvoiceBuilding
      StopPackingList
      Tic
      DeliverPackingList
      Tic
      CheckPackingListIsSolved
      SetInvoiceLineQuantityToZero
      CheckInvoiceIsCalculating
      Tic
      CheckInvoiceIsDiverged
      AcceptDecisionQuantityInvoice
      Tic
      StartInvoice
      Tic
      CheckPaymentBuilding
      StopInvoice
      Tic
      DeliverInvoice
      Tic
      CheckInvoiceIsSolved
      CheckInvoiceNotSplitted
      CheckPackingListIsNotDivergent
      CheckPackingListIsSolved
      CheckInvoiceTransactionRule
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_13_SplitAndDeferInvoice (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 3421, in test_13_SplitAndDeferInvoice
    self.playSequence(sequence, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 115, in playSequence
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      CheckInvoiceTransactionRule
      Tic
      CheckInvoiceBuilding
      StopPackingList
      Tic
      DeliverPackingList
      Tic
      CheckPackingListIsSolved
      CheckPackingListNotSplitted
      DecreaseInvoiceLineQuantity
      CheckInvoiceIsDivergent
      CheckInvoiceIsCalculating
      Tic
      CheckInvoiceIsDiverged
      SplitAndDeferInvoice
      Tic
      StartInvoice
      Tic
      CheckPaymentBuilding
      StopInvoice
      Tic
      DeliverInvoice
      Tic
      CheckInvoiceIsNotDivergent
      CheckInvoiceIsSolved
      CheckInvoiceSplitted
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
      CheckPackingListIsNotDivergent
      CheckPackingListIsSolved
      CheckInvoiceTransactionRule
      SwitchInvoices
      StartInvoice
      Tic
      CheckPaymentBuilding
      StopInvoice
      Tic
      DeliverInvoice
      Tic
      CheckInvoiceIsNotDivergent
      CheckInvoiceIsSolved
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_14_AcceptDecisionOnInvoice (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 3489, in test_14_AcceptDecisionOnInvoice
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      CheckInvoiceTransactionRule
      Tic
      CheckInvoiceBuilding
      StopPackingList
      Tic
      DeliverPackingList
      Tic
      CheckPackingListIsSolved
      CheckPackingListNotSplitted
      DecreaseInvoiceLineQuantity
      CheckInvoiceIsDivergent
      CheckInvoiceIsCalculating
      Tic
      CheckInvoiceIsDiverged
      AcceptDecisionQuantityInvoice
      Tic
      StartInvoice
      Tic
      CheckPaymentBuilding
      StopInvoice
      Tic
      DeliverInvoice
      Tic
      CheckPackingListIsNotDivergent
      CheckPackingListIsSolved
      CheckInvoiceTransactionRule
      CheckInvoiceNotSplitted
      CheckInvoiceIsNotDivergent
      CheckInvoiceIsSolved
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_16_ManuallyAddedMovements (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 3540, in test_16_ManuallyAddedMovements
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      Tic
      CheckInvoiceBuilding
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
      AddInvoiceLines
      Tic
      StartInvoice
      Tic
      CheckSimulationTrees
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_16a_ManuallyAddedMovementsManyTransactions (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 3150, in test_16a_ManuallyAddedMovementsManyTransactions
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      Tic
      CheckInvoiceBuilding
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
      AddInvoiceLinesManyTransactions
      Tic
      CheckInvoiceIsSolved
      StartInvoice
      Tic
      CheckSimulationTrees
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_17_ManuallyAddedWrongMovements (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 3566, in test_17_ManuallyAddedWrongMovements
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      Tic
      CheckInvoiceBuilding
      AddWrongInvoiceLines
      Tic
      StartInvoice
      CheckStartInvoiceFail
      CheckSimulationTrees
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_18_compareInvoiceAndPackingList (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 3588, in test_18_compareInvoiceAndPackingList
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderOrder
      Tic
      CheckDeliveryBuilding
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderSimulation
      CheckDeliveryBuilding
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      StartPackingList
    > CheckInvoicingRule
      Tic
      CheckInvoiceBuilding
      CheckInvoicesConsistency
      CheckPackingListInvoice
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 345, in stepCheckInvoicingRule
    self.assertEquals(len(temp_invoicing_rule_list), 1)
AssertionError: 0 != 1

FAIL: test_delivery_mode_and_incoterm_on_invoice (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2389, in test_delivery_mode_and_incoterm_on_invoice
    order.getDeliveryMode())
AssertionError: None != 'by_mail'

FAIL: test_modify_planned_order_invoice_transaction_rule (testInvoice.TestSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 1693, in test_modify_planned_order_invoice_transaction_rule
    self.assertEquals(3, len(invoice_transaction_applied_rule))
AssertionError: 3 != 0

FAIL: test_delivery_mode_and_incoterm_on_invoice (testInvoice.TestPurchaseInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2389, in test_delivery_mode_and_incoterm_on_invoice
    order.getDeliveryMode())
AssertionError: None != 'by_mail'

FAIL: test_modify_planned_order_invoice_transaction_rule (testInvoice.TestPurchaseInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testInvoice.py", line 1693, in test_modify_planned_order_invoice_transaction_rule
    self.assertEquals(3, len(invoice_transaction_applied_rule))
AssertionError: 3 != 0

ERROR: test_01_ItemSimpleTest (testItem.TestItem)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testItem.py", line 221, in test_01_ItemSimpleTest
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateOrganisation1
      CreateOrganisation2
      CreateOrganisation3
      CreateItemList
      CreateOrder
      SetOrderProfile
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderLineSetAggregationList
      ConfirmOrder
      Tic
      CheckOrderLineAggregate
      CheckOrderSimulation
    > CheckSimulationAggregate
      CheckDeliveryBuilding
      CheckPackingListLineAggregate
      CheckPackingListIsNotDivergent
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testItem.py", line 165, in stepCheckSimulationAggregate
    self.checkAggregate(line=simulation_movement, sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testItem.py", line 184, in checkAggregate
    self.assertEquals(len(line.getAggregateList()),1)
AttributeError: 'NoneType' object has no attribute 'getAggregateList'

ERROR: test_02_ItemWithInvoice (testItem.TestItem)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testItem.py", line 265, in test_02_ItemWithInvoice
    sequence_list.play(self, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateEntities
      CreateCurrency
      CreateItemList
      CreateSaleInvoiceTransactionRule
      CreateOrder
      SetOrderProfile
      SetOrderPriceCurrency
      CreateNotVariatedResource
      Tic
      CreateOrderLine
      SetOrderLineResource
      SetOrderLineDefaultValues
      OrderLineSetAggregationList
      ConfirmOrder
      Tic
      CheckOrderRule
      CheckOrderLineAggregate
      CheckOrderSimulation
    > CheckSimulationAggregate
      CheckDeliveryBuilding
      CheckPackingListLineAggregate
      AddPackingListContainer
      AddPackingListContainerLine
      SetContainerLineFullQuantity
      Tic
      CheckPackingListIsPacked
      SetReadyPackingList
      Tic
      StartPackingList
      CheckInvoicingRule
      Tic
      CheckInvoiceBuilding
      RebuildAndCheckNothingIsCreated
      CheckInvoicesConsistency
      CheckInvoiceLineAggregate
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testItem.py", line 165, in stepCheckSimulationAggregate
    self.checkAggregate(line=simulation_movement, sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testItem.py", line 184, in checkAggregate
    self.assertEquals(len(line.getAggregateList()),1)
AttributeError: 'NoneType' object has no attribute 'getAggregateList'

FAIL: test_order_payment_condition_not_copied (testLegacyOrder.TestOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testLegacyOrder.py", line 2576, in test_order_payment_condition_not_copied
    self.assertEquals(0, len(related_packing_list.contentValues(
AssertionError: 0 != 1

FAIL: test_safe_substitution_content (testNotificationMessageModule.TestNotificationMessageModule), Tests that 'safe' substitution is performed, unless safe_substitute is
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testNotificationMessageModule.py", line 186, in test_safe_substitution_content
    self.assertEqual('substitution text: ${b}', text)
AssertionError: 'substitution text: ${b}' != 'substitution text: ${b}\n'

FAIL: test_substitution_content (testNotificationMessageModule.TestNotificationMessageModule), Tests that content and subject have string.Template based substitutions
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testNotificationMessageModule.py", line 129, in test_substitution_content
    self.assertEqual('substitution text: b', text)
AssertionError: 'substitution text: b' != 'substitution text: b\n'

FAIL: test_substitution_content_and_convert (testNotificationMessageModule.TestNotificationMessageModule), Tests that substitution also works with different target format.
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testNotificationMessageModule.py", line 168, in test_substitution_content_and_convert
    self.assertEqual('substitution text: b', text)
AssertionError: 'substitution text: b' != 'substitution text: b\n'

FAIL: test_substitution_content_parameters (testNotificationMessageModule.TestNotificationMessageModule), Tests that we can pass parameters to convert to the substitution method,
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testNotificationMessageModule.py", line 150, in test_substitution_content_parameters
    self.assertEqual('substitution text: b', text)
AssertionError: 'substitution text: b' != 'substitution text: b\n'

FAIL: testOpenOrderRule (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 303, in testOpenOrderRule
    [(DateTime(3000,2,10,10,0), DateTime(3000,2,11,10,0)),
AssertionError: [(DateTime('3000/02/10 10:00:00 US/Eastern'), DateTime('3000/02/11 10:00:00 US/Eastern')), (DateTime('3000/02/17 10:00:00 US/Eastern'), DateTime('3000/02/18 10:00:00 US/Eastern')), (DateTime('3000/02/24 10:00:00 US/Eastern'), DateTime('3000/02/25 10:00:00 US/Eastern')), (DateTime('3000/03/03 10:00:00 US/Eastern'), DateTime('3000/03/04 10:00:00 US/Eastern')), (DateTime('3000/03/10 10:00:00 US/Eastern'), DateTime('3000/03/11 10:00:00 US/Eastern'))] != [(DateTime('3000/02/10 10:00:00 US/Eastern'), DateTime('3000/02/11 10:00:00 US/Eastern')), (DateTime('3000/02/17 10:00:00 US/Eastern'), DateTime('3000/02/18 10:00:00 US/Eastern')), (DateTime('3000/02/24 10:00:00 US/Eastern'), DateTime('3000/02/25 10:00:00 US/Eastern')), (DateTime('3000/03/03 10:00:00 US/Eastern'), DateTime('3000/03/04 10:00:00 US/Eastern')), (DateTime('3000/03/10 10:00:00 GMT-4'), DateTime('3000/03/11 10:00:00 GMT-4'))]

FAIL: testPeriodicityDateList (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 185, in testPeriodicityDateList
    [(D(2008,2,1,0,1), DateTime(2008,2,29)),
AssertionError: [(DateTime('2008/02/01 00:01:00 US/Eastern'), DateTime('2008/02/29')), (DateTime('2008/03/01 00:01:00 US/Eastern'), DateTime('2008/03/31')), (DateTime('2008/04/01 00:01:00 US/Eastern'), DateTime('2008/04/30')), (DateTime('2008/05/01 00:01:00 US/Eastern'), DateTime('2008/05/31')), (DateTime('2008/06/01 00:01:00 US/Eastern'), DateTime('2008/06/30')), (DateTime('2008/07/01 00:01:00 US/Eastern'), DateTime('2008/07/31')), (DateTime('2008/08/01 00:01:00 US/Eastern'), DateTime('2008/08/31')), (DateTime('2008/09/01 00:01:00 US/Eastern'), DateTime('2008/09/30')), (DateTime('2008/10/01 00:01:00 US/Eastern'), DateTime('2008/10/31')), (DateTime('2008/11/01 00:01:00 US/Eastern'), DateTime('2008/11/30'))] != [(DateTime('2008/02/01 00:01:00 US/Eastern'), DateTime('2008/02/29')), (DateTime('2008/03/01 00:01:00 US/Eastern'), DateTime('2008/03/31')), (DateTime('2008/04/01 00:01:00 GMT-4'), DateTime('2008/04/30')), (DateTime('2008/05/01 00:01:00 GMT-4'), DateTime('2008/05/31')), (DateTime('2008/06/01 00:01:00 GMT-4'), DateTime('2008/06/30')), (DateTime('2008/07/01 00:01:00 GMT-4'), DateTime('2008/07/31')), (DateTime('2008/08/01 00:01:00 GMT-4'), DateTime('2008/08/31')), (DateTime('2008/09/01 00:01:00 GMT-4'), DateTime('2008/09/30')), (DateTime('2008/10/01 00:01:00 GMT-4'), DateTime('2008/10/31')), (DateTime('2008/11/01 00:01:00 GMT-4'), DateTime('2008/11/30'))]

FAIL: test_order_payment_condition_not_copied (testOrder.TestOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testOrder.py", line 2578, in test_order_payment_condition_not_copied
    self.assertEquals(0, len(related_packing_list.contentValues(
AssertionError: 0 != 1

ERROR: test_NetSalaryReport (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testPayroll.py", line 2915, in test_NetSalaryReport
    line_list = self.getListBoxLineList(report_section_list[0])
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1200, in getListBoxLineList
    REQUEST=self.portal.REQUEST)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/ProxyField.py", line 742, in get_value
    return proxy_field.get_value(id, **kw)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/ProxyField.py", line 742, in get_value
    return proxy_field.get_value(id, **kw)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/ListBox.py", line 2758, in get_value
    render_prefix=kw.get('render_prefix'))
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/ListBox.py", line 448, in render
    return renderer()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/ListBox.py", line 1949, in __call__
    return self.render(**kw)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/ListBox.py", line 2493, in render
    for line in self.query():
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/ListBox.py", line 1870, in query
    report_section_list = self.getReportSectionList()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/ListBox.py", line 1845, in getReportSectionList
    object_list = selection(method=domain_list_method, context=domain_context, REQUEST=self.request)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Form/Selection.py", line 238, in __call__
    result = method(**kw)
  File "/usr/lib/erp5/lib/python/Shared/DC/Scripts/Bindings.py", line 311, in __call__
    return self._bindAndExec(args, kw, None)
  File "/usr/lib/erp5/lib/python/Shared/DC/Scripts/Bindings.py", line 348, in _bindAndExec
    return self._exec(bound_data, args, kw)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1263, in _exec
    return PythonScript_exec(self, *args)
  File "/usr/lib/erp5/lib/python/Products/PythonScripts/PythonScript.py", line 325, in _exec
    result = f(*args, **kw)
  File "Script (Python)", line 9, in AccountingTransactionModule_getNetSalaryReportSectionLineList
AttributeError: report

FAIL: test_AccountingLineGeneration (testPayroll.TestPayroll)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testPayroll.py", line 3186, in test_AccountingLineGeneration
    self.assertEquals(len(accounting_line_list), 4)
AssertionError: 0 != 4

FAIL: test_01_getYearToDateSlice (testPayroll_l10n_fr.TestPayroll_l10n_fr), Check that is possible to calculate the total amount spend on a slice
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll_l10n_fr.py", line 118, in test_01_getYearToDateSlice
    sequence_list.play(self)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateUrssafService
      CreateLabourService
      CreateEmployer
      CreateEmployee
      CreatePriceCurrency
      CreateModelWithSlices
      SetCurrencyOnModel
      ModelCreateUrssafModelLineWithSlices
      UrssafModelLineWithSlicesCreateMovements
      CreateBasicPaysheet
      PaysheetSetModelAndApplyIt
      PaysheetCreateLabourPaySheetLine
      CreateBusinessProcess
      CreateBusinessPath
      CreateUrssafRoubaixOrganisation
      ModifyBusinessPathTradePhase
      ModelSpecialiseBusinessProcess
      Tic
      CheckUpdateAggregatedAmountListReturnUsingSlices
      PaysheetApplyTransformation
      Tic
      CheckPaysheetLineAreCreatedUsingSlices
      CheckPaysheetLineAmountsUsingSlices
      CheckUpdateAggregatedAmountListReturnNothing
      CheckPaysheetLineAmountsUsingSlices
      CreateBasicPaysheet
      PaysheetSetModelAndApplyIt
      PaysheetCreateLabourPaySheetLine
      CreateBusinessProcess
      CreateBusinessPath
      CreateUrssafRoubaixOrganisation
      ModifyBusinessPathTradePhase
      ModelSpecialiseBusinessProcess
      Tic
      CheckUpdateAggregatedAmountListReturnUsingSlices
      PaysheetApplyTransformation
      Tic
      CheckPaysheetLineAreCreatedUsingSlices
      CheckPaysheetLineAmountsUsingSlices
      CheckUpdateAggregatedAmountListReturnNothing
      CheckPaysheetLineAmountsUsingSlices
    > CheckYearToDateSliceAmount
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testPayroll_l10n_fr.py", line 89, in stepCheckYearToDateSliceAmount
    paysheet_list[1].PaySheetTransaction_getYearToDateSlice(\
AssertionError: 400 != 0.0

FAIL: test_01_sourcingDelivery (testProductionPackingListApparel.TestProductionDeliveryApparel)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testProductionPackingList.py", line 776, in test_01_sourcingDelivery
    sequence_list.play(self)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      ClearActivities
      CreateProductionOrganisation1
      CreateSupplyOrganisation1
      CreateSourcingSC
      CreateVariatedResource
      CreateComponent1
      CreateTransformation
      CreateOrganisation
      CreateOrder
      CreateOrderLine
      Tic
      OrderOrder
      Tic
    > CheckSourcingSimulation
      ConfirmOrder
      Tic
      CheckSourcingSimulation
      CheckSourcingDeliverySimulation
      CheckProducedDeliveryPackingListIsConfirmed
      CheckProducedDeliveryPackingListIsSolved
      CheckSupplyDeliveryPackingListIsConfirmed
      CheckSupplyDeliveryPackingListIsSolved
      CheckProducedReportIsConfirmed
      CheckProducedReportIsSolved
      CheckConsumedReportIsConfirmed
      CheckConsumedReportIsSolved
      DecreaseProducedDeliveryPackingListQuantity
      CheckProducedDeliveryPackingListIsCalculating
      Tic
      CheckProducedDeliveryPackingListIsDiverged
      AcceptDecisionProducedDeliveryPackingList
      Tic
      CheckProducedDeliveryPackingListIsSolved
      CheckSourcingDeliverySimulationDecreasedQuantity
      CheckSupplyDeliveryPackingListIsConfirmed
      CheckSupplyDeliveryPackingListIsDiverged
      CheckProducedReportIsConfirmed
      CheckProducedReportIsDiverged
      CheckConsumedReportIsConfirmed
      CheckConsumedReportIsDiverged
      SetReadyProducedDeliveryPackingList
      StartProducedDeliveryPackingList
      StopProducedDeliveryPackingList
      DeliverProducedDeliveryPackingList
      Tic
      CheckSourcingDeliverySimulationDecreasedQuantity
      CheckProducedDeliveryPackingListIsDelivered
      CheckProducedDeliveryPackingListIsSolved
      CheckSupplyDeliveryPackingListIsConfirmed
      CheckSupplyDeliveryPackingListIsDiverged
      CheckProducedReportIsConfirmed
      CheckProducedReportIsDiverged
      CheckConsumedReportIsConfirmed
      CheckConsumedReportIsDiverged
      AdoptPrevisionSupplyDeliveryPackingList
      Tic
      CheckSupplyDeliveryPackingListIsSolved
      CheckProducedReportIsConfirmed
      CheckProducedReportIsDiverged
      CheckConsumedReportIsConfirmed
      CheckConsumedReportIsDiverged
      SetReadySupplyDeliveryPackingList
      StartSupplyDeliveryPackingList
      StopSupplyDeliveryPackingList
      DeliverSupplyDeliveryPackingList
      Tic
      CheckSourcingDeliverySimulationDecreasedQuantity
      CheckProducedDeliveryPackingListIsDelivered
      CheckProducedDeliveryPackingListIsSolved
      CheckSupplyDeliveryPackingListIsDelivered
      CheckSupplyDeliveryPackingListIsSolved
      CheckProducedReportIsConfirmed
      CheckProducedReportIsDiverged
      CheckConsumedReportIsConfirmed
      CheckConsumedReportIsDiverged
      AdoptPrevisionProducedReport
      Tic
      CheckProducedReportIsSolved
      CheckConsumedReportIsConfirmed
      CheckConsumedReportIsDiverged
      SetReadyProducedReport
      StartProducedReport
      StopProducedReport
      DeliverProducedReport
      Tic
      CheckSourcingDeliverySimulationDecreasedQuantity
      CheckProducedDeliveryPackingListIsDelivered
      CheckProducedDeliveryPackingListIsSolved
      CheckSupplyDeliveryPackingListIsDelivered
      CheckSupplyDeliveryPackingListIsSolved
      CheckProducedReportIsDelivered
      CheckProducedReportIsSolved
      CheckConsumedReportIsConfirmed
      CheckConsumedReportIsDiverged
      AdoptPrevisionConsumedReport
      Tic
      CheckProducedReportIsSolved
      SetReadyConsumedReport
      StartConsumedReport
      StopConsumedReport
      DeliverConsumedReport
      Tic
      CheckSourcingDeliverySimulationDecreasedQuantity
      CheckProducedDeliveryPackingListIsDelivered
      CheckProducedDeliveryPackingListIsSolved
      CheckSupplyDeliveryPackingListIsDelivered
      CheckSupplyDeliveryPackingListIsSolved
      CheckProducedReportIsDelivered
      CheckProducedReportIsSolved
      CheckConsumedReportIsDelivered
      CheckConsumedReportIsSolved
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testProductionOrderApparel.py", line 477, in stepCheckSourcingSimulation
    self.assertEquals(1, len(related_simulation_movement_list))
AssertionError: 1 != 0

FAIL: testSkinSelectionTemplateField (testProxyField.TestProxyField)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Form/tests/testProxyField.py", line 189, in testSkinSelectionTemplateField
    self.assertEquals('Customized Title', field.get_value('title'))
AssertionError: 'Customized Title' != 'Generic Title'

FAIL: test_order_payment_condition_not_copied (testPurchaseOrder.TestPurchaseOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testOrder.py", line 2578, in test_order_payment_condition_not_copied
    self.assertEquals(0, len(related_packing_list.contentValues(
AssertionError: 0 != 1

ERROR: test_sourceDestinationReferenceOnSupplyLineOnDefaultSupplyLine (testResource.TestResource), Check that it's possible to set and get a source/destination_reference
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testResource.py", line 1115, in test_sourceDestinationReferenceOnSupplyLineOnDefaultSupplyLine
    self.assertEquals(resource.getPurchaseSupplyLineDestinationReference(),
AttributeError: getPurchaseSupplyLineDestinationReference

FAIL: test checking if the field values are of the proper type.
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/Formulator/tests/testSerializeForm.py", line 358, in test_fieldValueTypes
    self.assertEquals(field.values, field2.values)
AssertionError: {'alternate_name': '', 'title': 'Test Title', 'date_separator': '', 'editable': 0, 'input_order': 'mdy', 'start_datetime': None, 'description': '', 'default_now': 0, 'allow_empty_time': 0, 'ampm_time_style': 0, 'hide_day': 0, 'date_only': 0, 'time_separator': '$', 'hidden': 0, 'default': None, 'css_class': 'test_css', 'required': 1, 'enabled': 1, 'input_style': 'list', 'external_validator': '', 'hidden_day_is_last_day': 0, 'end_datetime': None, 'timezone_style': 0} != {'alternate_name': '', 'title': 'Test Title', 'date_separator': '', 'editable': 0, 'input_order': 'mdy', 'start_datetime': '', 'description': '', 'default_now': 0, 'allow_empty_time': 0, 'ampm_time_style': 0, 'hide_day': 0, 'date_only': 0, 'time_separator': '$', 'hidden': 0, 'default': '', 'css_class': 'test_css', 'required': 1, 'enabled': 1, 'input_style': 'list', 'external_validator': '', 'hidden_day_is_last_day': 0, 'end_datetime': '', 'timezone_style': 0}

FAIL: test_tax_line_build_accounting (testTaxLineTradeCondition.TestTaxLineOrderSimulationSaleOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testTaxLineTradeCondition.py", line 947, in test_tax_line_build_accounting
    self.assertEquals(3, len(accounting_line_list))
AssertionError: 3 != 0

FAIL: test_tax_line_simulation (testTaxLineTradeCondition.TestTaxLineOrderSimulationSaleOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testTaxLineTradeCondition.py", line 699, in test_tax_line_simulation
    self.assertEquals(1, len(invoice_rule_list))
AssertionError: 1 != 0

FAIL: test_tax_line_build_accounting (testTaxLineTradeCondition.TestTaxLineOrderSimulationPurchaseOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testTaxLineTradeCondition.py", line 947, in test_tax_line_build_accounting
    self.assertEquals(3, len(accounting_line_list))
AssertionError: 3 != 0

FAIL: test_tax_line_simulation (testTaxLineTradeCondition.TestTaxLineOrderSimulationPurchaseOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testTaxLineTradeCondition.py", line 699, in test_tax_line_simulation
    self.assertEquals(1, len(invoice_rule_list))
AssertionError: 1 != 0

FAIL: test_tax_line_simulation (testTaxLineTradeCondition.TestTaxLineInvoiceSimulationPurchaseInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testTaxLineTradeCondition.py", line 1202, in test_tax_line_simulation
    self.assertEquals(3, len(accounting_line_list))
AssertionError: 3 != 0

FAIL: test_tax_line_simulation (testTaxLineTradeCondition.TestTaxLineInvoiceSimulationSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testTaxLineTradeCondition.py", line 1202, in test_tax_line_simulation
    self.assertEquals(3, len(accounting_line_list))
AssertionError: 3 != 0

FAIL: test_NonDeliveryTemplateNotIndexable (testTemplate.TestTemplate)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testTemplate.py", line 345, in test_NonDeliveryTemplateNotIndexable
    self._testTemplateNotIndexable(document)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testTemplate.py", line 315, in _testTemplateNotIndexable
    self.assertEquals(0, len(self.portal.portal_catalog(uid=template.getUid())))
AssertionError: 0 != 1

FAIL: test_manyTemplatesWithoutReindexation (testTemplate.TestTemplate), Check what happen when templates are created one by one without reindexation
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.5/build/unit_test/Products/ERP5/tests/testTemplate.py", line 279, in test_manyTemplatesWithoutReindexation
    self.assertEqual(len(preference_id_list) + 1, len(new_preference_id_list))
AssertionError: 1 != 2

FAIL: test_BuildTradeModelLineAndAccountingFromInvoice (testTradeModelLine.TestTradeModelLineSale)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2482, in test_BuildTradeModelLineAndAccountingFromInvoice
    self.assertEquals(3, len(accounting_line_list))
AssertionError: 3 != 0

FAIL: test_BuildTradeModelLineAndAccountingFromOrder (testTradeModelLine.TestTradeModelLineSale)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2395, in test_BuildTradeModelLineAndAccountingFromOrder
    self.assertEquals(3, len(accounting_line_list))
AssertionError: 3 != 0

FAIL: test_TradeModelRuleSimulationBuildInvoiceBuildInvoiceTransactionLines (testTradeModelLine.TestTradeModelLineSale), Check that having properly configured invoice transaction rule it invoice transaction lines are nicely generated and have proper amounts
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2137, in test_TradeModelRuleSimulationBuildInvoiceBuildInvoiceTransactionLines
    sequence_list.play(self, quiet=True)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateServiceTax
      CreateServiceDiscount
      CreatePriceCurrency
      CreateProductDiscounted
      CreateProductTaxed
      CreateProductDiscountedTaxed
      CreateSource
      CreateSourceSection
      CreateDestination
      CreateDestinationSection
      Tic
      CreateBusinessProcess
      CreateBusinessState
      ModifyBusinessStateTaxed
      CreateBusinessState
      ModifyBusinessStateInvoiced
      CreateBusinessPath
      ModifyBusinessPathTaxing
      CreateBusinessPath
      ModifyBusinessPathDiscounting
      CreateTradeCondition
      SpecialiseTradeConditionWithBusinessProcess
      CreateTradeModelLine
      ModifyTradeModelLineTax
      CreateTradeModelLine
      ModifyTradeModelLineDiscount
      Tic
      CreateOrder
      SpecialiseOrderTradeCondition
      FillOrder
      Tic
      CreateOrderLine
      ModifyOrderLineTaxed
      CreateOrderLine
      ModifyOrderLineDiscounted
      CreateOrderLine
      ModifyOrderLineDiscountedTaxed
      Tic
      CheckOrderComplexTradeConditionAggregatedAmountList
      CheckOrderLineTaxedAggregatedAmountList
      CheckOrderLineDiscountedTaxedAggregatedAmountList
      CheckOrderLineDiscountedAggregatedAmountList
      Tic
      PlanOrder
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      ConfirmOrder
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      GetPackingList
      PackPackingList
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      StartPackingList
      StopPackingList
      DeliverPackingList
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      GetInvoice
      CheckInvoiceCausalityStateSolved
      CheckInvoiceNormalMovements
      StartInvoice
      Tic
      CheckInvoiceCausalityStateSolved
      CheckInvoiceNormalMovements
    > CheckInvoiceAccountingMovements
      StopInvoice
      DeliverInvoice
      Tic
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 382, in stepCheckInvoiceAccountingMovements
    self.assertEqual(3, len(movement_list))
AssertionError: 3 != 0

FAIL: test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving (testTradeModelLine.TestTradeModelLineSale), Check that after changing invoice line invoice is properly diverged and it is possible to solve
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2104, in test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving
    sequence_list.play(self, quiet=True)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateServiceTax
      CreateServiceDiscount
      CreatePriceCurrency
      CreateProductDiscounted
      CreateProductTaxed
      CreateProductDiscountedTaxed
      CreateSource
      CreateSourceSection
      CreateDestination
      CreateDestinationSection
      Tic
      CreateBusinessProcess
      CreateBusinessState
      ModifyBusinessStateTaxed
      CreateBusinessState
      ModifyBusinessStateInvoiced
      CreateBusinessPath
      ModifyBusinessPathTaxing
      CreateBusinessPath
      ModifyBusinessPathDiscounting
      CreateTradeCondition
      SpecialiseTradeConditionWithBusinessProcess
      CreateTradeModelLine
      ModifyTradeModelLineTax
      CreateTradeModelLine
      ModifyTradeModelLineDiscount
      Tic
      CreateOrder
      SpecialiseOrderTradeCondition
      FillOrder
      Tic
      CreateOrderLine
      ModifyOrderLineTaxed
      CreateOrderLine
      ModifyOrderLineDiscounted
      CreateOrderLine
      ModifyOrderLineDiscountedTaxed
      Tic
      CheckOrderComplexTradeConditionAggregatedAmountList
      CheckOrderLineTaxedAggregatedAmountList
      CheckOrderLineDiscountedTaxedAggregatedAmountList
      CheckOrderLineDiscountedAggregatedAmountList
      Tic
      PlanOrder
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      ConfirmOrder
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      GetPackingList
      PackPackingList
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      StartPackingList
      StopPackingList
      DeliverPackingList
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      GetInvoice
      CheckInvoiceCausalityStateSolved
      CheckInvoiceNormalMovements
      GetInvoiceLineDiscounted
      GetInvoiceLineDiscountedTaxed
      GetInvoiceLineTaxed
      ModifyQuantityInvoiceLineDiscounted
      ModifyQuantityInvoiceLineDiscountedTaxed
      ModifyQuantityInvoiceLineTaxed
      Tic
      CheckInvoiceCausalityStateDiverged
      AcceptDecisionQuantityInvoice
      Tic
    > CheckInvoiceCausalityStateSolved
      CheckInvoiceNormalMovements
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 459, in stepCheckInvoiceCausalityStateSolved
    invoice.getDivergenceList())
AssertionError: [<DivergenceMessage object at 0xa3caf80
  'decision_value': 1.9999999999999998
  'divergence_scope': 'quantity'
  'prevision_value': 5.0
  'mapping': {}
  'object_relative_url': 'accounting_module/5/5'
  'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/8/3/1/1/1/1/1/1>
  'tested_property': 'quantity'
  'decision_title': '1.9999999999999998'
  'message': 'Quantity'>, <DivergenceMessage object at 0x97adf80
  'decision_value': -0.60000000000000009
  'divergence_scope': 'quantity'
  'prevision_value': -1.5
  'mapping': {}
  'object_relative_url': 'accounting_module/5/5'
  'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/8/2/1/1/1/1/1/2>
  'tested_property': 'quantity'
  'decision_title': '-0.60000000000000009'
  'message': 'Quantity'>, <DivergenceMessage object at 0x8e94f80
  'decision_value': 28.5
  'divergence_scope': 'quantity'
  'prevision_value': 71.25
  'mapping': {}
  'object_relative_url': 'accounting_module/5/5'
  'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/8/1/1/1/1/1/1/2>
  'tested_property': 'quantity'
  'decision_title': '28.5'
  'message': 'Quantity'>, <DivergenceMessage object at 0xadd3a70
  'decision_value': 12.0
  'divergence_scope': 'quantity'
  'prevision_value': 30.0
  'mapping': {}
  'object_relative_url': 'accounting_module/5/4'
  'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/8/2/1/1/1/1/1/1>
  'tested_property': 'quantity'
  'decision_title': '12.0'
  'message': 'Quantity'>, <DivergenceMessage object at 0x66f44d0
  'decision_value': 30.0
  'divergence_scope': 'quantity'
  'prevision_value': 75.0
  'mapping': {}
  'object_relative_url': 'accounting_module/5/4'
  'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/8/1/1/1/1/1/1/1>
  'tested_property': 'quantity'
  'decision_title': '30.0'
  'message': 'Quantity'>]

FAIL: test_TradeModelRuleSimulationBuildInvoiceNewInvoiceLineSupport (testTradeModelLine.TestTradeModelLineSale), Check how is supported addition of invoice line to invoice build from order
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2066, in test_TradeModelRuleSimulationBuildInvoiceNewInvoiceLineSupport
    sequence_list.play(self, quiet=True)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateServiceTax
      CreateServiceDiscount
      CreatePriceCurrency
      CreateProductDiscounted
      CreateProductTaxed
      CreateProductDiscountedTaxed
      CreateSource
      CreateSourceSection
      CreateDestination
      CreateDestinationSection
      Tic
      CreateBusinessProcess
      CreateBusinessState
      ModifyBusinessStateTaxed
      CreateBusinessState
      ModifyBusinessStateInvoiced
      CreateBusinessPath
      ModifyBusinessPathTaxing
      CreateBusinessPath
      ModifyBusinessPathDiscounting
      CreateTradeCondition
      SpecialiseTradeConditionWithBusinessProcess
      CreateTradeModelLine
      ModifyTradeModelLineTax
      CreateTradeModelLine
      ModifyTradeModelLineDiscount
      Tic
      CreateOrder
      SpecialiseOrderTradeCondition
      FillOrder
      Tic
      CreateOrderLine
      ModifyOrderLineTaxed
      CreateOrderLine
      ModifyOrderLineDiscounted
      CreateOrderLine
      ModifyOrderLineDiscountedTaxed
      Tic
      CheckOrderComplexTradeConditionAggregatedAmountList
      CheckOrderLineTaxedAggregatedAmountList
      CheckOrderLineDiscountedTaxedAggregatedAmountList
      CheckOrderLineDiscountedAggregatedAmountList
      Tic
      PlanOrder
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      ConfirmOrder
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      GetPackingList
      PackPackingList
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      StartPackingList
      StopPackingList
      DeliverPackingList
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      GetInvoice
      CheckInvoiceCausalityStateSolved
      CheckInvoiceNormalMovements
      CreateInvoiceLine
      ModifyInvoiceLineDiscounted
      CreateInvoiceLine
      ModifyInvoiceLineDiscountedTaxed
      CreateInvoiceLine
      ModifyInvoiceLineTaxed
      Tic
      CheckInvoiceCausalityStateSolved
      StartInvoice
      Tic
      CheckInvoiceCausalityStateSolved
      CheckInvoiceNormalMovements
    > CheckInvoiceAccountingMovements
      StopInvoice
      DeliverInvoice
      Tic
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 382, in stepCheckInvoiceAccountingMovements
    self.assertEqual(3, len(movement_list))
AssertionError: 3 != 0

FAIL: test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio (testTradeModelLine.TestTradeModelLineSale), Check building invoice after splitting packing list using different ratio
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2185, in test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio
    sequence_list.play(self, quiet=True)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateServiceTax
      CreateServiceDiscount
      CreatePriceCurrency
      CreateProductDiscounted
      CreateProductTaxed
      CreateProductDiscountedTaxed
      CreateSource
      CreateSourceSection
      CreateDestination
      CreateDestinationSection
      Tic
      CreateBusinessProcess
      CreateBusinessState
      ModifyBusinessStateTaxed
      CreateBusinessState
      ModifyBusinessStateInvoiced
      CreateBusinessPath
      ModifyBusinessPathTaxing
      CreateBusinessPath
      ModifyBusinessPathDiscounting
      CreateTradeCondition
      SpecialiseTradeConditionWithBusinessProcess
      CreateTradeModelLine
      ModifyTradeModelLineTax
      CreateTradeModelLine
      ModifyTradeModelLineDiscount
      Tic
      CreateOrder
      SpecialiseOrderTradeCondition
      FillOrder
      Tic
      CreateOrderLine
      ModifyOrderLineTaxed
      CreateOrderLine
      ModifyOrderLineDiscounted
      CreateOrderLine
      ModifyOrderLineDiscountedTaxed
      Tic
      CheckOrderComplexTradeConditionAggregatedAmountList
      CheckOrderLineTaxedAggregatedAmountList
      CheckOrderLineDiscountedTaxedAggregatedAmountList
      CheckOrderLineDiscountedAggregatedAmountList
      Tic
      PlanOrder
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      ConfirmOrder
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      GetPackingList
      DecreasePackingListLineListQuantity
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      CheckPackingListDiverged
      SplitAndDeferPackingList
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      GetNewPackingList
      PackPackingList
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      StartPackingList
      StopPackingList
      DeliverPackingList
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      GetInvoice
    > CheckInvoiceCausalityStateSolved
      CheckInvoiceNormalMovements
      SetNewPackingListAsPackingList
      PackPackingList
      Tic
      StartPackingList
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      StopPackingList
      DeliverPackingList
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      GetInvoice
      CheckInvoiceCausalityStateSolved
      CheckInvoiceNormalMovements
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 459, in stepCheckInvoiceCausalityStateSolved
    invoice.getDivergenceList())
AssertionError: [<DivergenceMessage object at 0x6587440
  'decision_value': -0.049999999999999989
  'divergence_scope': 'property'
  'prevision_value': -0.050000000000000003
  'mapping': {}
  'object_relative_url': 'accounting_module/12/5'
  'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/21/2/1/1/1/1/1/1>
  'tested_property': 'price'
  'message': 'Price'>, <DivergenceMessage object at 0xb550560
  'decision_value': -0.049999999999999989
  'divergence_scope': 'property'
  'prevision_value': -0.050000000000000003
  'mapping': {}
  'object_relative_url': 'accounting_module/12/5'
  'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/21/1/1/1/1/1/1/1>
  'tested_property': 'price'
  'message': 'Price'>]

FAIL: test_BuildTradeModelLineAndAccountingFromInvoice (testTradeModelLinePurchase.TestTradeModelLinePurchase)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2482, in test_BuildTradeModelLineAndAccountingFromInvoice
    self.assertEquals(3, len(accounting_line_list))
AssertionError: 3 != 0

FAIL: test_BuildTradeModelLineAndAccountingFromOrder (testTradeModelLinePurchase.TestTradeModelLinePurchase)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2395, in test_BuildTradeModelLineAndAccountingFromOrder
    self.assertEquals(3, len(accounting_line_list))
AssertionError: 3 != 0

FAIL: test_TradeModelRuleSimulationBuildInvoiceBuildInvoiceTransactionLines (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check that having properly configured invoice transaction rule it invoice transaction lines are nicely generated and have proper amounts
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2137, in test_TradeModelRuleSimulationBuildInvoiceBuildInvoiceTransactionLines
    sequence_list.play(self, quiet=True)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateServiceTax
      CreateServiceDiscount
      CreatePriceCurrency
      CreateProductDiscounted
      CreateProductTaxed
      CreateProductDiscountedTaxed
      CreateSource
      CreateSourceSection
      CreateDestination
      CreateDestinationSection
      Tic
      CreateBusinessProcess
      CreateBusinessState
      ModifyBusinessStateTaxed
      CreateBusinessState
      ModifyBusinessStateInvoiced
      CreateBusinessPath
      ModifyBusinessPathTaxing
      CreateBusinessPath
      ModifyBusinessPathDiscounting
      CreateTradeCondition
      SpecialiseTradeConditionWithBusinessProcess
      CreateTradeModelLine
      ModifyTradeModelLineTax
      CreateTradeModelLine
      ModifyTradeModelLineDiscount
      Tic
      CreateOrder
      SpecialiseOrderTradeCondition
      FillOrder
      Tic
      CreateOrderLine
      ModifyOrderLineTaxed
      CreateOrderLine
      ModifyOrderLineDiscounted
      CreateOrderLine
      ModifyOrderLineDiscountedTaxed
      Tic
      CheckOrderComplexTradeConditionAggregatedAmountList
      CheckOrderLineTaxedAggregatedAmountList
      CheckOrderLineDiscountedTaxedAggregatedAmountList
      CheckOrderLineDiscountedAggregatedAmountList
      Tic
      PlanOrder
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      ConfirmOrder
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      GetPackingList
      PackPackingList
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      StartPackingList
      StopPackingList
      DeliverPackingList
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      GetInvoice
      CheckInvoiceCausalityStateSolved
      CheckInvoiceNormalMovements
      StartInvoice
      Tic
      CheckInvoiceCausalityStateSolved
      CheckInvoiceNormalMovements
    > CheckInvoiceAccountingMovements
      StopInvoice
      DeliverInvoice
      Tic
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 382, in stepCheckInvoiceAccountingMovements
    self.assertEqual(3, len(movement_list))
AssertionError: 3 != 0

FAIL: test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check that after changing invoice line invoice is properly diverged and it is possible to solve
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 145, in run
    testMethod()
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2104, in test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving
    sequence_list.play(self, quiet=True)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
    sequence.play(context, sequence_number=i, quiet=quiet)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
    self._step_list[self._played_index] \
    Current Sequence:
      CreateServiceTax
      CreateServiceDiscount
      CreatePriceCurrency
      CreateProductDiscounted
      CreateProductTaxed
      CreateProductDiscountedTaxed
      CreateSource
      CreateSourceSection
      CreateDestination
      CreateDestinationSection
      Tic
      CreateBusinessProcess
      CreateBusinessState
      ModifyBusinessStateTaxed
      CreateBusinessState
      ModifyBusinessStateInvoiced
      CreateBusinessPath
      ModifyBusinessPathTaxing
      CreateBusinessPath
      ModifyBusinessPathDiscounting
      CreateTradeCondition
      SpecialiseTradeConditionWithBusinessProcess
      CreateTradeModelLine
      ModifyTradeModelLineTax
      CreateTradeModelLine
      ModifyTradeModelLineDiscount
      Tic
      CreateOrder
      SpecialiseOrderTradeCondition
      FillOrder
      Tic
      CreateOrderLine
      ModifyOrderLineTaxed
      CreateOrderLine
      ModifyOrderLineDiscounted
      CreateOrderLine
      ModifyOrderLineDiscountedTaxed
      Tic
      CheckOrderComplexTradeConditionAggregatedAmountList
      CheckOrderLineTaxedAggregatedAmountList
      CheckOrderLineDiscountedTaxedAggregatedAmountList
      CheckOrderLineDiscountedAggregatedAmountList
      Tic
      PlanOrder
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      ConfirmOrder
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      GetPackingList
      PackPackingList
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      StartPackingList
      StopPackingList
      DeliverPackingList
      Tic
      CheckOrderLineTaxedSimulation
      CheckOrderLineDiscountedSimulation
      CheckOrderLineDiscountedTaxedSimulation
      GetInvoice
      CheckInvoiceCausalityStateSolved
      CheckInvoiceNormalMovements
      GetInvoiceLineDiscounted
      GetInvoiceLineDiscountedTaxed
      GetInvoiceLineTaxed
      ModifyQuantityInvoiceLineDiscounted
      ModifyQuantityInvoiceLineDiscountedTaxed
      ModifyQuantityInvoiceLineTaxed
      Tic
      CheckInvoiceCausalityStateDiverged
      AcceptDecisionQuantityInvoice
      Tic
    > CheckInvoiceCausalityStateSolved
      CheckInvoiceNormalMovements
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
    method(sequence=sequence)
  File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 459, in stepCheckInvoiceCausalityStateSolved
    invoice.getDivergenceList())
AssertionError: [<DivergenceMessage object at 0x762c200
  'decision_value': 1.9999999999999998
  'divergence_scope': 'quantity'
  'prevision_value': 5.0
  'mapping': {}
  'object_relative_url': 'accounting_module/5/5'
  'simulation_movement': <SimulationMovement at /erp5_portal_f961ca546667fb6832d17eeef19b90b9/portal_simulation/8/3/1/1/1/1/1/1>
  'tested_property': 'quantity'
  'decision_title': '1.9999999999999998'
  'message': 'Quantity'>, <DivergenceMessage object at 0x9295e60
  'decision_value': -0.60000000000000009
  'divergence_scope': 'quantity'
  'prevision_value': -1.5
  'mapping': {}
  'object_relative_url': 'accounting_module/5/5'
  'simulation_movement': <SimulationMovement at /erp5_portal_f961ca546667fb6832d17eeef19b90b9/portal_simulation/8/2/1/1/1/1/1/2>
  'tested_property': 'quantity'
  'decision_title': '-0.60000000000000009'
  'message': 'Quantity'>, <DivergenceMessage object at 0x6f67e18
  'decision_value': 28.5
  'divergence_scope': 'quantity'
  'prevision_value': 71.25
  'mapping': {}
  'object_relative_url': 'accounting_module/5/5'
  'simulation_movement': <SimulationMovement at /erp5_portal_f961ca546667fb6832d17eeef19b90b9/portal_simulation/8/1/1/1/1/1/1/2>
  'tested_property': 'quantity'
  'decision_title': '28.5'
  'message': 'Quantity'>, <DivergenceMessage object at 0x7360f38
  'decision_value': 12.0
  'divergence_scope': 'quantity'
  'prevision_value': 30.0
  'mapping': {}
  'object_relative_url': 'accounting_module/5/4'
  'simulation_movement': <SimulationMovement at /erp5_portal_f961ca546667fb6832d17eeef19b90b9/portal_simulation/8/2/1/1/1/1/1/1>
  'tested_property': 'quantity'
  'decision_title': '12.0'
  'message': 'Quantity'>, <DivergenceMessage object at 0x92cdd88
  'decision_value': 30.0
  'divergence_scope': 'quantity'
  'prevision_value': 75.0
  'mapping': {}
  'object_relative_url': 'accounting_module/5/4'
  'simulation_movement': <SimulationMovement at /erp5_portal_f961ca546667fb6832d17eeef19b90b9/portal_simulation/8/1/1/1/1/1/1/1>
  'tested_property': 'quantity'
  'decision_title': '30.0'
  'message': 'Quantity'>]

(truncated) ...