[Erp5-report] ERP5 r32456: 3131 Tests, 641 Errors, 18 Failures, 19 Skips
nobody at svn.erp5.org
nobody at svn.erp5.org
Fri Feb 12 05:34:04 CET 2010
Test Suite: ERP5
Revision: 32456
Result: FAIL
All tests: 3131
Failures: 18
Errors: 641
Skips: 19
The following tests failed:
testAccountingRules (22 errors)
test_04_SimpleInvoice (testAccountingRules.TestSaleAccountingRules), Simple Invoice.
test_04b_SimpleInvoiceConfirm (testAccountingRules.TestSaleAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 lines.
test_04d_SimpleInvoiceTwoCells (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 cells.
test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestSaleAccountingRules), Add a new line then updateAppliedRule.
test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestSaleAccountingRules), Tests that editing a line updates simulation correctly
test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestSaleAccountingRules), Tests that removing a line updates simulation correctly
test_05d_SimpleInvoiceReExpandCreateCell (testAccountingRules.TestSaleAccountingRules), Tests that replacing a line by cells updates simulation correctly
test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestSaleAccountingRules), Tests that updating an applied rule many times doesn't break the
test_06_MultiLineInvoice (testAccountingRules.TestSaleAccountingRules), Multiple lines invoice.
test_planning_invoice_creates_simulation (testAccountingRules.TestSaleAccountingRules)
test_04_SimpleInvoice (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice.
test_04b_SimpleInvoiceConfirm (testAccountingRules.TestPurchaseAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 lines.
test_04d_SimpleInvoiceTwoCells (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 cells.
test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestPurchaseAccountingRules), Add a new line then updateAppliedRule.
test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestPurchaseAccountingRules), Tests that editing a line updates simulation correctly
test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestPurchaseAccountingRules), Tests that removing a line updates simulation correctly
test_05d_SimpleInvoiceReExpandCreateCell (testAccountingRules.TestPurchaseAccountingRules), Tests that replacing a line by cells updates simulation correctly
test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestPurchaseAccountingRules), Tests that updating an applied rule many times doesn't break the
test_06_MultiLineInvoice (testAccountingRules.TestPurchaseAccountingRules), Multiple lines invoice.
test_planning_invoice_creates_simulation (testAccountingRules.TestPurchaseAccountingRules)
testAdvancedInvoicing (45 errors)
test_01_TwoInvoicesFromTwoPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_01_TwoInvoicesFromTwoPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_02_InvoiceDeletePackingListLine (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_02_InvoiceDeletePackingListLine (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_03_InvoiceDecreaseQuantity (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_03_InvoiceDecreaseQuantity (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_04_InvoiceChangeStartDateFail (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_04_InvoiceChangeStartDateFail (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_05_AcceptDecisionOnPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_05_AcceptDecisionOnPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_06_AcceptDecisionOnPackingListAndInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_06_AcceptDecisionOnPackingListAndInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_07_SplitAndDeferInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_07_SplitAndDeferInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_08_AcceptDecisionOnInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_08_AcceptDecisionOnInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_09_Reference (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_10_ManuallyAddedMovements (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_10_ManuallyAddedMovements (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_11_ManuallyAddedMovementsManyTransactions (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_11_ManuallyAddedMovementsManyTransactions (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_12_compareInvoiceAndPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_12_compareInvoiceAndPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_13_acceptQuantityDivergenceOnInvoiceWithStartedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_13_acceptQuantityDivergenceOnInvoiceWithStartedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_AcceptQuantityDivergenceOnInvoiceWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice), Accept divergence with stopped packing list
test_AcceptQuantityDivergenceOnInvoiceWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice), Accept divergence with stopped packing list
test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice), Adopt quantity with stopped packing list
test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice), Adopt quantity with stopped packing list
test_CreatingAccountingTransactionThroughInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice), test creating simple invoice and accounting transaction
test_CreatingAccountingTransactionThroughInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice), test creating simple invoice and accounting transaction
test_InvoiceViewAsODT (testAdvancedInvoicing.TestAdvancedSaleInvoice), Create ODT printout
test_InvoiceViewAsODT (testAdvancedInvoicing.TestAdvancedSaleInvoice), Create ODT printout
test_PackingListEditAndInvoiceRule (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_PackingListEditAndInvoiceRule (testAdvancedInvoicing.TestAdvancedSaleInvoice)
test_AcceptQuantityDivergenceOnInvoiceWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), Accept divergence with stopped packing list
test_AcceptQuantityDivergenceOnInvoiceWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), Accept divergence with stopped packing list
test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), Adopt quantity with stopped packing list
test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), Adopt quantity with stopped packing list
test_CreatingAccountingTransactionThroughInvoice (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), test creating simple invoice and accounting transaction
test_CreatingAccountingTransactionThroughInvoice (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), test creating simple invoice and accounting transaction
test_InvoiceViewAsODT (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), Create ODT printout
test_InvoiceViewAsODT (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), Create ODT printout
test_PackingListEditAndInvoiceRule (testAdvancedInvoicing.TestAdvancedPurchaseInvoice)
test_PackingListEditAndInvoiceRule (testAdvancedInvoicing.TestAdvancedPurchaseInvoice)
testBPMCore (1 errors)
test_BusinessState_getRemainingTradePhaseList (testBPMCore.TestBPMImplementation)
testBusinessTemplate (1 failures, 2 errors)
test_165_checkCopyBuildInstall (testBusinessTemplate.TestBusinessTemplate)
test_166_checkXHtmlCopyBuildInstall (testBusinessTemplate.TestBusinessTemplate)
test_164_checkCopyBuild (testBusinessTemplate.TestBusinessTemplate)
testCRM (1 failures)
test_Base_getEntityListFromFromHeader (testCRM.TestCRMMailIngestion)
testConversionInSimulation (8 errors)
test_01_delivery_mode_on_sale_packing_list_and_invoice (testConversionInSimulation.TestConversionInSimulation)
test_01_delivery_mode_on_sale_packing_list_and_invoice (testConversionInSimulation.TestConversionInSimulation)
test_01_destination_total_asset_price_on_accounting_lines (testConversionInSimulation.TestConversionInSimulation)
test_01_diverged_purchase_packing_list_source_total_asset_price (testConversionInSimulation.TestConversionInSimulation)
test_01_diverged_sale_packing_list_destination_total_asset_price (testConversionInSimulation.TestConversionInSimulation)
test_01_quantity_unit_on_sale_packing_list (testConversionInSimulation.TestConversionInSimulation)
test_01_simulation_movement_destination_asset_price (testConversionInSimulation.TestConversionInSimulation)
test_01_simulation_movement_source_asset_price (testConversionInSimulation.TestConversionInSimulation)
testDeliveryBuilderToSupportMultipleLines (8 errors)
test_01_IfNested (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
test_01_IfNested (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
test_02_AdoptingPrevision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
test_02_AdoptingPrevision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
test_03_AcceptingDecision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
test_03_AcceptingDecision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
test_04_MergingMultipleSaleOrders (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
test_04_MergingMultipleSaleOrders (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
testDivergenceTester (3 failures, 1 errors)
test_01_QuantityDivergenceTester (testDivergenceTester.TestDivergenceTester)
test_02_CategoryDivergenceTester (testDivergenceTester.TestDivergenceTester)
test_03_PropertyDivergenceTester (testDivergenceTester.TestDivergenceTester)
test_04_CategoryDivergenceTester (testDivergenceTester.TestDivergenceTester)
testERP5Catalog (1 failures, 3 skips)
test_complex_query (testERP5Catalog.TestERP5Catalog)
testERP5Commerce (19 errors)
test_11_finalizeShopping (testERP5Commerce.TestCommerce)
test_11_finalizeShopping (testERP5Commerce.TestCommerce)
test_12_getAvailableShippingResourceList (testERP5Commerce.TestCommerce)
test_13_getFormatedData (testERP5Commerce.TestCommerce)
test_14_getSelectedShippingResource (testERP5Commerce.TestCommerce)
test_15_getShoppingCartDefaultCurrency (testERP5Commerce.TestCommerce)
test_16_simulatePaypalPayment (testERP5Commerce.TestCommerce)
test_17_getProductListFromWebSection (testERP5Commerce.TestCommerce)
test_18_editShoppingCardWithABlankShippingMethod (testERP5Commerce.TestCommerce)
test_19_editShoppingCardWithShippingMethodWithoutPrice (testERP5Commerce.TestCommerce)
test_20_getProductListFromWebSite (testERP5Commerce.TestCommerce)
test_21_AddResourceToShoppingCartWithAnonymousUser (testERP5Commerce.TestCommerce)
test_22_createShoppingCartWithAnonymousAndLogin (testERP5Commerce.TestCommerce)
test_23_getShoppingCartCustomer (testERP5Commerce.TestCommerce)
test_24_getImageDataWithAnonymousUser (testERP5Commerce.TestCommerce)
test_25_getSaleOrderModuleAbsoluteUrlWithAnonymousUser (testERP5Commerce.TestCommerce)
test_26_getShoppingCartDefaultCurrencyWithAnonymousUser (testERP5Commerce.TestCommerce)
test_27_ResourceGetShopUrl (testERP5Commerce.TestCommerce)
test_28_finalizeShoppingWithComment (testERP5Commerce.TestCommerce)
testERP5Interfaces (17 errors)
test_Products.ERP5.AggregatedAmountList_AggregatedAmountList_implements_IAmountList (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.BusinessPath_BusinessPath_implements_IBusinessPath (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.BusinessPath_BusinessPath_implements_ICategoryAccessProvider (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.Document_Document_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.EmailDocument_EmailDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.Event_Event_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.File_File_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.Image_Image_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.OOoDocument_OOoDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TextDocument_TextDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TradeCondition_TradeCondition_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TradeModelCell_TradeModelCell_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TradeModelLine_TradeModelLine_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TradeModelRule_TradeModelRule_implements_IRule (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TransformationRule_TransformationRule_implements_IRule (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.Transformation_Transformation_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.Transformation_Transformation_implements_IVariated (testERP5Interfaces.TestERP5Interfaces)
testERP5Simulation (113 errors)
test_03_PackingListChangeStartDate (testERP5Simulation.TestERP5SimulationPackingList)
test_03_PackingListChangeStartDate (testERP5Simulation.TestERP5SimulationPackingList)
test_04_PackingListDeleteLine (testERP5Simulation.TestERP5SimulationPackingList)
test_04_PackingListDeleteLine (testERP5Simulation.TestERP5SimulationPackingList)
test_05_SimulationChangeQuantity (testERP5Simulation.TestERP5SimulationPackingList)
test_05_SimulationChangeQuantity (testERP5Simulation.TestERP5SimulationPackingList)
test_05a_SimulationChangeQuantityAndAcceptDecision (testERP5Simulation.TestERP5SimulationPackingList)
test_05a_SimulationChangeQuantityAndAcceptDecision (testERP5Simulation.TestERP5SimulationPackingList)
test_05b_SimulationChangeQuantityForMergedLine (testERP5Simulation.TestERP5SimulationPackingList)
test_05b_SimulationChangeQuantityForMergedLine (testERP5Simulation.TestERP5SimulationPackingList)
test_05c_SimulationChangeQuantityAndAcceptDecisionForMergedLine (testERP5Simulation.TestERP5SimulationPackingList)
test_05c_SimulationChangeQuantityAndAcceptDecisionForMergedLine (testERP5Simulation.TestERP5SimulationPackingList)
test_05d_SimulationChangeResourceOnOneSimulationMovementForMergedLine (testERP5Simulation.TestERP5SimulationPackingList)
test_05d_SimulationChangeResourceOnOneSimulationMovementForMergedLine (testERP5Simulation.TestERP5SimulationPackingList)
test_05e_SimulationUnifyResourceOnSimulationMovementsForNonMergedLines (testERP5Simulation.TestERP5SimulationPackingList)
test_05e_SimulationUnifyResourceOnSimulationMovementsForNonMergedLines (testERP5Simulation.TestERP5SimulationPackingList)
test_05f_SimulationChangeAndPartialAcceptDecision (testERP5Simulation.TestERP5SimulationPackingList)
test_05f_SimulationChangeAndPartialAcceptDecision (testERP5Simulation.TestERP5SimulationPackingList)
test_06_SimulationChangeStartDate (testERP5Simulation.TestERP5SimulationPackingList)
test_06_SimulationChangeStartDate (testERP5Simulation.TestERP5SimulationPackingList)
test_07_SimulationChangeStartDateWithTwoOrderLine (testERP5Simulation.TestERP5SimulationPackingList)
test_07_SimulationChangeStartDateWithTwoOrderLine (testERP5Simulation.TestERP5SimulationPackingList)
test_07a_SimulationChangeStartDateWithTwoOrderLine (testERP5Simulation.TestERP5SimulationPackingList)
test_07a_SimulationChangeStartDateWithTwoOrderLine (testERP5Simulation.TestERP5SimulationPackingList)
test_08_AddContainers (testERP5Simulation.TestERP5SimulationPackingList)
test_08_AddContainers (testERP5Simulation.TestERP5SimulationPackingList)
test_09_AddContainersWithVariatedResources (testERP5Simulation.TestERP5SimulationPackingList)
test_09_AddContainersWithVariatedResources (testERP5Simulation.TestERP5SimulationPackingList)
test_10_PackingListIncreaseQuantity (testERP5Simulation.TestERP5SimulationPackingList)
test_10_PackingListIncreaseQuantity (testERP5Simulation.TestERP5SimulationPackingList)
test_11_PackingListDecreaseTwoTimesQuantityAndUpdateDelivery (testERP5Simulation.TestERP5SimulationPackingList)
test_11_PackingListDecreaseTwoTimesQuantityAndUpdateDelivery (testERP5Simulation.TestERP5SimulationPackingList)
test_12_PackingListLineChangeResource (testERP5Simulation.TestERP5SimulationPackingList)
test_12_PackingListLineChangeResource (testERP5Simulation.TestERP5SimulationPackingList)
test_14_PackingListHavePriceCurrencyCategory (testERP5Simulation.TestERP5SimulationPackingList), Deliveries must have a price currency category. #252
test_15_CheckBuilderCanBeCalledTwiceSafely (testERP5Simulation.TestERP5SimulationPackingList)
test_15_CheckBuilderCanBeCalledTwiceSafely (testERP5Simulation.TestERP5SimulationPackingList)
test_16_simulation_reindexation_on_cancel (testERP5Simulation.TestERP5SimulationPackingList)
test_16_simulation_reindexation_on_cancel (testERP5Simulation.TestERP5SimulationPackingList)
test_PackingList_viewAsODT (testERP5Simulation.TestERP5SimulationPackingList)
test_PackingList_viewAsODT (testERP5Simulation.TestERP5SimulationPackingList)
test_SplitAndDeferDoNothing (testERP5Simulation.TestERP5SimulationPackingList)
test_SplitAndDeferDoNothing (testERP5Simulation.TestERP5SimulationPackingList)
test_01_SimpleInvoice (testERP5Simulation.TestERP5SimulationInvoice)
test_01_SimpleInvoice (testERP5Simulation.TestERP5SimulationInvoice)
test_01_quantity_unit_copied (testERP5Simulation.TestERP5SimulationInvoice)
test_01_quantity_unit_copied (testERP5Simulation.TestERP5SimulationInvoice)
test_02_TwoInvoicesFromTwoPackingList (testERP5Simulation.TestERP5SimulationInvoice)
test_02_TwoInvoicesFromTwoPackingList (testERP5Simulation.TestERP5SimulationInvoice)
test_03_InvoiceEditAndInvoiceRule (testERP5Simulation.TestERP5SimulationInvoice)
test_03_InvoiceEditAndInvoiceRule (testERP5Simulation.TestERP5SimulationInvoice)
test_04_PackingListEditAndInvoiceRule (testERP5Simulation.TestERP5SimulationInvoice)
test_04_PackingListEditAndInvoiceRule (testERP5Simulation.TestERP5SimulationInvoice)
test_05_InvoiceEditPackingListLine (testERP5Simulation.TestERP5SimulationInvoice)
test_05_InvoiceEditPackingListLine (testERP5Simulation.TestERP5SimulationInvoice)
test_06_InvoiceDeletePackingListLine (testERP5Simulation.TestERP5SimulationInvoice)
test_06_InvoiceDeletePackingListLine (testERP5Simulation.TestERP5SimulationInvoice)
test_07_InvoiceAddPackingListLine (testERP5Simulation.TestERP5SimulationInvoice)
test_07_InvoiceAddPackingListLine (testERP5Simulation.TestERP5SimulationInvoice)
test_08_InvoiceDecreaseQuantity (testERP5Simulation.TestERP5SimulationInvoice)
test_08_InvoiceDecreaseQuantity (testERP5Simulation.TestERP5SimulationInvoice)
test_09_InvoiceChangeStartDateFail (testERP5Simulation.TestERP5SimulationInvoice)
test_09_InvoiceChangeStartDateFail (testERP5Simulation.TestERP5SimulationInvoice)
test_09b_InvoiceChangeStartDateSucceed (testERP5Simulation.TestERP5SimulationInvoice)
test_09b_InvoiceChangeStartDateSucceed (testERP5Simulation.TestERP5SimulationInvoice)
test_10_AcceptDecisionOnPackingList (testERP5Simulation.TestERP5SimulationInvoice)
test_10_AcceptDecisionOnPackingList (testERP5Simulation.TestERP5SimulationInvoice)
test_11_AcceptDecisionOnPackingListAndInvoice (testERP5Simulation.TestERP5SimulationInvoice)
test_11_AcceptDecisionOnPackingListAndInvoice (testERP5Simulation.TestERP5SimulationInvoice)
test_12_SplitPackingListAndAcceptInvoice (testERP5Simulation.TestERP5SimulationInvoice)
test_12_SplitPackingListAndAcceptInvoice (testERP5Simulation.TestERP5SimulationInvoice)
test_13_SplitAndDeferInvoice (testERP5Simulation.TestERP5SimulationInvoice)
test_13_SplitAndDeferInvoice (testERP5Simulation.TestERP5SimulationInvoice)
test_14_AcceptDecisionOnInvoice (testERP5Simulation.TestERP5SimulationInvoice)
test_14_AcceptDecisionOnInvoice (testERP5Simulation.TestERP5SimulationInvoice)
test_16_ManuallyAddedMovements (testERP5Simulation.TestERP5SimulationInvoice)
test_16_ManuallyAddedMovements (testERP5Simulation.TestERP5SimulationInvoice)
test_16a_ManuallyAddedMovementsManyTransactions (testERP5Simulation.TestERP5SimulationInvoice)
test_16a_ManuallyAddedMovementsManyTransactions (testERP5Simulation.TestERP5SimulationInvoice)
test_17_ManuallyAddedWrongMovements (testERP5Simulation.TestERP5SimulationInvoice)
test_17_ManuallyAddedWrongMovements (testERP5Simulation.TestERP5SimulationInvoice)
test_18_compareInvoiceAndPackingList (testERP5Simulation.TestERP5SimulationInvoice)
test_18_compareInvoiceAndPackingList (testERP5Simulation.TestERP5SimulationInvoice)
test_CopyAndPaste (testERP5Simulation.TestERP5SimulationInvoice), Test copy on paste on Invoice.
test_Invoice_viewAsODT (testERP5Simulation.TestERP5SimulationInvoice)
test_Invoice_viewAsODT (testERP5Simulation.TestERP5SimulationInvoice)
test_Invoice_viewAsODT_empty_image (testERP5Simulation.TestERP5SimulationInvoice)
test_Invoice_viewAsODT_empty_image (testERP5Simulation.TestERP5SimulationInvoice)
test_Invoice_viewAsODT_invalid_image (testERP5Simulation.TestERP5SimulationInvoice)
test_Invoice_viewAsODT_invalid_image (testERP5Simulation.TestERP5SimulationInvoice)
test_Reference (testERP5Simulation.TestERP5SimulationInvoice)
test_accept_quantity_divergence_on_invoice_with_started_packing_list (testERP5Simulation.TestERP5SimulationInvoice)
test_accept_quantity_divergence_on_invoice_with_started_packing_list (testERP5Simulation.TestERP5SimulationInvoice)
test_accept_quantity_divergence_on_invoice_with_stopped_packing_list (testERP5Simulation.TestERP5SimulationInvoice)
test_accept_quantity_divergence_on_invoice_with_stopped_packing_list (testERP5Simulation.TestERP5SimulationInvoice)
test_adopt_quantity_divergence_on_invoice_line_with_stopped_packing_list (testERP5Simulation.TestERP5SimulationInvoice)
test_adopt_quantity_divergence_on_invoice_line_with_stopped_packing_list (testERP5Simulation.TestERP5SimulationInvoice)
test_delivery_mode_and_incoterm_on_invoice (testERP5Simulation.TestERP5SimulationInvoice)
test_delivery_mode_and_incoterm_on_invoice (testERP5Simulation.TestERP5SimulationInvoice)
test_description_copied_on_lines (testERP5Simulation.TestERP5SimulationInvoice)
test_description_copied_on_lines (testERP5Simulation.TestERP5SimulationInvoice)
test_invoice_building_with_cells (testERP5Simulation.TestERP5SimulationInvoice)
test_invoice_building_with_cells (testERP5Simulation.TestERP5SimulationInvoice)
test_invoice_building_with_cells_and_aggregate (testERP5Simulation.TestERP5SimulationInvoice)
test_invoice_building_with_cells_and_aggregate (testERP5Simulation.TestERP5SimulationInvoice)
test_invoice_created_from_packing_list_with_no_order (testERP5Simulation.TestERP5SimulationInvoice)
test_invoice_created_from_packing_list_with_no_order (testERP5Simulation.TestERP5SimulationInvoice)
test_invoice_transaction_line_resource (testERP5Simulation.TestERP5SimulationInvoice)
test_invoice_transaction_line_resource (testERP5Simulation.TestERP5SimulationInvoice)
test_modify_planned_order_invoice_transaction_rule (testERP5Simulation.TestERP5SimulationInvoice)
test_modify_planned_order_invoice_transaction_rule (testERP5Simulation.TestERP5SimulationInvoice)
test_modify_planned_order_invoicing_rule (testERP5Simulation.TestERP5SimulationInvoice)
test_modify_planned_order_invoicing_rule (testERP5Simulation.TestERP5SimulationInvoice)
testERP5TypeInterfaces (1 errors)
test_Products.ERP5Type.ConsistencyMessage_ConsistencyMessage_implements_IConsistencyMessage (testERP5TypeInterfaces.TestERP5TypeInterfaces)
testFormPrintoutAsODT (1 failures, 1 skips)
test_02_Table_07_CellFormat (testFormPrintoutAsODT.TestFormPrintoutAsODT), 7. Normal case: cell format cetting
testICal (1 failures)
test_01_renderEvent (testICal.TestICal)
testImmobilisation (1 failures, 38 errors)
test_03_complexItemStructureImmobilisationStateChange (testImmobilisation.TestImmobilisation)
test_03_complexItemStructureImmobilisationStateChange (testImmobilisation.TestImmobilisation)
test_04_TestContinuousMethodMovementValidity (testImmobilisation.TestImmobilisation)
test_04_TestContinuousMethodMovementValidity (testImmobilisation.TestImmobilisation)
test_05_TestImmobilisationPeriodsWithContinuousMethodDuringContinuousTime (testImmobilisation.TestImmobilisation)
test_05_TestImmobilisationPeriodsWithContinuousMethodDuringContinuousTime (testImmobilisation.TestImmobilisation)
test_06_TestImmobilisationPeriodsWithContinuousMethodDuringUncontinuousTime (testImmobilisation.TestImmobilisation)
test_06_TestImmobilisationPeriodsWithContinuousMethodDuringUncontinuousTime (testImmobilisation.TestImmobilisation)
test_07_TestImmobilisationPeriodsWithUncontinuousMethodDuringContinuousTime (testImmobilisation.TestImmobilisation)
test_07_TestImmobilisationPeriodsWithUncontinuousMethodDuringContinuousTime (testImmobilisation.TestImmobilisation)
test_08_TestImmobilisationPeriodsWithUncontinuousMethodDuringUncontinuousTime (testImmobilisation.TestImmobilisation)
test_08_TestImmobilisationPeriodsWithUncontinuousMethodDuringUncontinuousTime (testImmobilisation.TestImmobilisation)
test_09_TestAmortisationPriceAndSimulationForLinearAmortisation (testImmobilisation.TestImmobilisation)
test_09_TestAmortisationPriceAndSimulationForLinearAmortisation (testImmobilisation.TestImmobilisation)
test_10_TestAmortisationPriceForDegressiveAmortisation (testImmobilisation.TestImmobilisation)
test_10_TestAmortisationPriceForDegressiveAmortisation (testImmobilisation.TestImmobilisation)
test_11_TestAmortisationPriceAndSimulationForUncontinuousDegressiveAmortisation (testImmobilisation.TestImmobilisation)
test_11_TestAmortisationPriceAndSimulationForUncontinuousDegressiveAmortisation (testImmobilisation.TestImmobilisation)
test_12_TestAmortisationPriceForActualUseDegressiveAmortisation (testImmobilisation.TestImmobilisation)
test_12_TestAmortisationPriceForActualUseDegressiveAmortisation (testImmobilisation.TestImmobilisation)
test_13_TestAmortisationPriceForNoAmortisationMethod (testImmobilisation.TestImmobilisation)
test_13_TestAmortisationPriceForNoAmortisationMethod (testImmobilisation.TestImmobilisation)
test_14_TestOwnerChangeSimulationForContinuousAmortisationMethod (testImmobilisation.TestImmobilisation)
test_14_TestOwnerChangeSimulationForContinuousAmortisationMethod (testImmobilisation.TestImmobilisation)
test_15_TestOwnerChangeSimulationForUnContinuousAmortisationMethod (testImmobilisation.TestImmobilisation)
test_15_TestOwnerChangeSimulationForUnContinuousAmortisationMethod (testImmobilisation.TestImmobilisation)
test_16_TestOwnerChangeSimulationForContinuousAmortisationMethod (testImmobilisation.TestImmobilisation)
test_16_TestOwnerChangeSimulationForContinuousAmortisationMethod (testImmobilisation.TestImmobilisation)
test_17_TestMonthlyAmortisation (testImmobilisation.TestImmobilisation)
test_17_TestMonthlyAmortisation (testImmobilisation.TestImmobilisation)
test_18_TestAccountingBuilding (testImmobilisation.TestImmobilisation)
test_18_TestAccountingBuilding (testImmobilisation.TestImmobilisation)
test_19BIS_TestAccountingBuildAndOwngerChange (testImmobilisation.TestImmobilisation)
test_19BIS_TestAccountingBuildAndOwngerChange (testImmobilisation.TestImmobilisation)
test_19_TestAccountingBuildingAndDivergence (testImmobilisation.TestImmobilisation)
test_19_TestAccountingBuildingAndDivergence (testImmobilisation.TestImmobilisation)
test_21_TestSimulationBuildingWithValidatedTransactions (testImmobilisation.TestImmobilisation)
test_21_TestSimulationBuildingWithValidatedTransactions (testImmobilisation.TestImmobilisation)
test_20_TestAccountingAcceptDecisionSolver (testImmobilisation.TestImmobilisation)
testInventory (3 errors)
test_01_getInventory (testInventory.TestInventory)
test_02_InventoryModule (testInventory.TestInventory)
test_03_InventoryModuleWithVariation (testInventory.TestInventory)
testInventoryAPI (1 errors)
testBackwardCompatibility (testInventoryAPI.TestUnitConversionBackwardCompatibility)
testInventoryModule (4 errors)
test_01_NotVariatedInventory (testInventoryModule.TestInventoryModule)
test_02_VariatedInventory (testInventoryModule.TestInventoryModule)
test_03_VariatedAggregatedInventory (testInventoryModule.TestInventoryModule)
test_04_VariatedAggregatedInventoryGetInventoryList (testInventoryModule.TestInventoryModule)
testInvoice (99 errors)
test_01_SimpleInvoice (testInvoice.TestSaleInvoice)
test_01_SimpleInvoice (testInvoice.TestSaleInvoice)
test_01_quantity_unit_copied (testInvoice.TestSaleInvoice)
test_01_quantity_unit_copied (testInvoice.TestSaleInvoice)
test_02_TwoInvoicesFromTwoPackingList (testInvoice.TestSaleInvoice)
test_02_TwoInvoicesFromTwoPackingList (testInvoice.TestSaleInvoice)
test_03_InvoiceEditAndInvoiceRule (testInvoice.TestSaleInvoice)
test_03_InvoiceEditAndInvoiceRule (testInvoice.TestSaleInvoice)
test_04_PackingListEditAndInvoiceRule (testInvoice.TestSaleInvoice)
test_04_PackingListEditAndInvoiceRule (testInvoice.TestSaleInvoice)
test_05_InvoiceEditPackingListLine (testInvoice.TestSaleInvoice)
test_05_InvoiceEditPackingListLine (testInvoice.TestSaleInvoice)
test_06_InvoiceDeletePackingListLine (testInvoice.TestSaleInvoice)
test_06_InvoiceDeletePackingListLine (testInvoice.TestSaleInvoice)
test_07_InvoiceAddPackingListLine (testInvoice.TestSaleInvoice)
test_07_InvoiceAddPackingListLine (testInvoice.TestSaleInvoice)
test_08_InvoiceDecreaseQuantity (testInvoice.TestSaleInvoice)
test_08_InvoiceDecreaseQuantity (testInvoice.TestSaleInvoice)
test_09_InvoiceChangeStartDateFail (testInvoice.TestSaleInvoice)
test_09_InvoiceChangeStartDateFail (testInvoice.TestSaleInvoice)
test_09b_InvoiceChangeStartDateSucceed (testInvoice.TestSaleInvoice)
test_09b_InvoiceChangeStartDateSucceed (testInvoice.TestSaleInvoice)
test_10_AcceptDecisionOnPackingList (testInvoice.TestSaleInvoice)
test_10_AcceptDecisionOnPackingList (testInvoice.TestSaleInvoice)
test_11_AcceptDecisionOnPackingListAndInvoice (testInvoice.TestSaleInvoice)
test_11_AcceptDecisionOnPackingListAndInvoice (testInvoice.TestSaleInvoice)
test_12_SplitPackingListAndAcceptInvoice (testInvoice.TestSaleInvoice)
test_12_SplitPackingListAndAcceptInvoice (testInvoice.TestSaleInvoice)
test_13_SplitAndDeferInvoice (testInvoice.TestSaleInvoice)
test_13_SplitAndDeferInvoice (testInvoice.TestSaleInvoice)
test_14_AcceptDecisionOnInvoice (testInvoice.TestSaleInvoice)
test_14_AcceptDecisionOnInvoice (testInvoice.TestSaleInvoice)
test_16_ManuallyAddedMovements (testInvoice.TestSaleInvoice)
test_16_ManuallyAddedMovements (testInvoice.TestSaleInvoice)
test_16a_ManuallyAddedMovementsManyTransactions (testInvoice.TestSaleInvoice)
test_16a_ManuallyAddedMovementsManyTransactions (testInvoice.TestSaleInvoice)
test_17_ManuallyAddedWrongMovements (testInvoice.TestSaleInvoice)
test_17_ManuallyAddedWrongMovements (testInvoice.TestSaleInvoice)
test_18_compareInvoiceAndPackingList (testInvoice.TestSaleInvoice)
test_18_compareInvoiceAndPackingList (testInvoice.TestSaleInvoice)
test_CopyAndPaste (testInvoice.TestSaleInvoice), Test copy on paste on Invoice.
test_Invoice_viewAsODT (testInvoice.TestSaleInvoice)
test_Invoice_viewAsODT (testInvoice.TestSaleInvoice)
test_Invoice_viewAsODT_empty_image (testInvoice.TestSaleInvoice)
test_Invoice_viewAsODT_empty_image (testInvoice.TestSaleInvoice)
test_Invoice_viewAsODT_invalid_image (testInvoice.TestSaleInvoice)
test_Invoice_viewAsODT_invalid_image (testInvoice.TestSaleInvoice)
test_Reference (testInvoice.TestSaleInvoice)
test_accept_quantity_divergence_on_invoice_with_started_packing_list (testInvoice.TestSaleInvoice)
test_accept_quantity_divergence_on_invoice_with_started_packing_list (testInvoice.TestSaleInvoice)
test_accept_quantity_divergence_on_invoice_with_stopped_packing_list (testInvoice.TestSaleInvoice)
test_accept_quantity_divergence_on_invoice_with_stopped_packing_list (testInvoice.TestSaleInvoice)
test_adopt_quantity_divergence_on_invoice_line_with_stopped_packing_list (testInvoice.TestSaleInvoice)
test_adopt_quantity_divergence_on_invoice_line_with_stopped_packing_list (testInvoice.TestSaleInvoice)
test_delivery_mode_and_incoterm_on_invoice (testInvoice.TestSaleInvoice)
test_delivery_mode_and_incoterm_on_invoice (testInvoice.TestSaleInvoice)
test_description_copied_on_lines (testInvoice.TestSaleInvoice)
test_description_copied_on_lines (testInvoice.TestSaleInvoice)
test_invoice_building_with_cells (testInvoice.TestSaleInvoice)
test_invoice_building_with_cells (testInvoice.TestSaleInvoice)
test_invoice_building_with_cells_and_aggregate (testInvoice.TestSaleInvoice)
test_invoice_building_with_cells_and_aggregate (testInvoice.TestSaleInvoice)
test_invoice_created_from_packing_list_with_no_order (testInvoice.TestSaleInvoice)
test_invoice_created_from_packing_list_with_no_order (testInvoice.TestSaleInvoice)
test_invoice_transaction_line_resource (testInvoice.TestSaleInvoice)
test_invoice_transaction_line_resource (testInvoice.TestSaleInvoice)
test_modify_planned_order_invoice_transaction_rule (testInvoice.TestSaleInvoice)
test_modify_planned_order_invoice_transaction_rule (testInvoice.TestSaleInvoice)
test_modify_planned_order_invoicing_rule (testInvoice.TestSaleInvoice)
test_modify_planned_order_invoicing_rule (testInvoice.TestSaleInvoice)
test_01_quantity_unit_copied (testInvoice.TestPurchaseInvoice)
test_01_quantity_unit_copied (testInvoice.TestPurchaseInvoice)
test_CopyAndPaste (testInvoice.TestPurchaseInvoice), Test copy on paste on Invoice.
test_Invoice_viewAsODT (testInvoice.TestPurchaseInvoice)
test_Invoice_viewAsODT (testInvoice.TestPurchaseInvoice)
test_Invoice_viewAsODT_empty_image (testInvoice.TestPurchaseInvoice)
test_Invoice_viewAsODT_empty_image (testInvoice.TestPurchaseInvoice)
test_Invoice_viewAsODT_invalid_image (testInvoice.TestPurchaseInvoice)
test_Invoice_viewAsODT_invalid_image (testInvoice.TestPurchaseInvoice)
test_accept_quantity_divergence_on_invoice_with_stopped_packing_list (testInvoice.TestPurchaseInvoice)
test_accept_quantity_divergence_on_invoice_with_stopped_packing_list (testInvoice.TestPurchaseInvoice)
test_adopt_quantity_divergence_on_invoice_line_with_stopped_packing_list (testInvoice.TestPurchaseInvoice)
test_adopt_quantity_divergence_on_invoice_line_with_stopped_packing_list (testInvoice.TestPurchaseInvoice)
test_delivery_mode_and_incoterm_on_invoice (testInvoice.TestPurchaseInvoice)
test_delivery_mode_and_incoterm_on_invoice (testInvoice.TestPurchaseInvoice)
test_description_copied_on_lines (testInvoice.TestPurchaseInvoice)
test_description_copied_on_lines (testInvoice.TestPurchaseInvoice)
test_invoice_building_with_cells (testInvoice.TestPurchaseInvoice)
test_invoice_building_with_cells (testInvoice.TestPurchaseInvoice)
test_invoice_building_with_cells_and_aggregate (testInvoice.TestPurchaseInvoice)
test_invoice_building_with_cells_and_aggregate (testInvoice.TestPurchaseInvoice)
test_invoice_created_from_packing_list_with_no_order (testInvoice.TestPurchaseInvoice)
test_invoice_created_from_packing_list_with_no_order (testInvoice.TestPurchaseInvoice)
test_invoice_transaction_line_resource (testInvoice.TestPurchaseInvoice)
test_invoice_transaction_line_resource (testInvoice.TestPurchaseInvoice)
test_modify_planned_order_invoice_transaction_rule (testInvoice.TestPurchaseInvoice)
test_modify_planned_order_invoice_transaction_rule (testInvoice.TestPurchaseInvoice)
test_modify_planned_order_invoicing_rule (testInvoice.TestPurchaseInvoice)
test_modify_planned_order_invoicing_rule (testInvoice.TestPurchaseInvoice)
testItem (24 errors)
test_01_ItemSimpleTest (testItem.TestItem)
test_01_ItemSimpleTest (testItem.TestItem)
test_02_ItemWithInvoice (testItem.TestItem)
test_02_ItemWithInvoice (testItem.TestItem)
test_03_CreateItemsFromPackingListLine (testItem.TestItem)
test_03_CreateItemsFromPackingListLine (testItem.TestItem)
test_04_CreateItemsFromPackingListLineWithVariationDefined (testItem.TestItem)
test_04_CreateItemsFromPackingListLineWithVariationDefined (testItem.TestItem)
test_05_CreateItemsFromPackingListLineWithNotVariatedResource (testItem.TestItem)
test_05_CreateItemsFromPackingListLineWithNotVariatedResource (testItem.TestItem)
test_06_VerifyHavingSameItemTwiceOnMovementCausesNoBug (testItem.TestItem)
test_06_VerifyHavingSameItemTwiceOnMovementCausesNoBug (testItem.TestItem)
test_select_item_dialog_no_variation (testItem.TestItem)
test_select_item_dialog_no_variation (testItem.TestItem)
test_select_item_dialog_variation (testItem.TestItem)
test_select_item_dialog_variation (testItem.TestItem)
test_Item_getCurrentOwnerTitle (testItem.TestItemScripts)
test_Item_getCurrentOwnerValue (testItem.TestItemScripts)
test_Item_getCurrentSiteTitle (testItem.TestItemScripts)
test_Item_getCurrentSiteValue (testItem.TestItemScripts)
test_Item_getResourceTitle (testItem.TestItemScripts)
test_Item_getResourceValue (testItem.TestItemScripts)
test_Item_getVariationCategoryList (testItem.TestItemScripts)
test_Item_getVariationRangeCategoryItemList (testItem.TestItemScripts)
testOpenOrder (2 failures)
testOpenOrderRule (testOpenOrder.TestOpenOrder)
testPeriodicityDateList (testOpenOrder.TestOpenOrder)
testOrder (19 errors)
test_10_Order_testSimulationState (testOrder.TestOrder)
test_11_testPropertiesAcquisition (testOrder.TestOrder)
test_12_testAppliedRuleGeneration (testOrder.TestOrder)
test_13_testAppliedRuleUpdate (testOrder.TestOrder)
test_15_deliveryBuilder (testOrder.TestOrder)
test_16_deliveryBuilderWithNoTic (testOrder.TestOrder)
test_17_orderExpand (testOrder.TestOrder)
test_18_SimulationStateIndexation (testOrder.TestOrder)
test_19_getMovementList (testOrder.TestOrder)
test_19b_getTotalQuantityAndPrice (testOrder.TestOrder)
test_20_testHierarchicalOrderAppliedRuleGeneration (testOrder.TestOrder)
test_Order_viewAsODT (testOrder.TestOrder)
test_Order_viewAsODT_big_image (testOrder.TestOrder)
test_Order_viewAsODT_hierarchical (testOrder.TestOrder)
test_Order_viewAsODT_image (testOrder.TestOrder)
test_Order_viewAsODT_non_ascii (testOrder.TestOrder)
test_Order_viewAsODT_person (testOrder.TestOrder)
test_order_cell_getTotalPrice (testOrder.TestOrder)
test_order_payment_condition_not_copied (testOrder.TestOrder)
testOrderBuilder (4 errors)
test_01_simpleOrderBuilder (testOrderBuilder.TestOrderBuilder)
test_01a_simpleOrderBuilderVariatedResource (testOrderBuilder.TestOrderBuilder)
test_02_maxDelayResourceOrderBuilder (testOrderBuilder.TestOrderBuilder)
test_03_minFlowResourceOrderBuilder (testOrderBuilder.TestOrderBuilder)
testPackingList (48 errors)
test_01_PackingListDecreaseQuantity (testPackingList.TestPackingList)
test_02_PackingListChangeDestination (testPackingList.TestPackingList)
test_03_PackingListChangeStartDate (testPackingList.TestPackingList)
test_04_PackingListDeleteLine (testPackingList.TestPackingList)
test_05_SimulationChangeQuantity (testPackingList.TestPackingList)
test_05a_SimulationChangeQuantityAndAcceptDecision (testPackingList.TestPackingList)
test_05b_SimulationChangeQuantityForMergedLine (testPackingList.TestPackingList)
test_05c_SimulationChangeQuantityAndAcceptDecisionForMergedLine (testPackingList.TestPackingList)
test_05d_SimulationChangeResourceOnOneSimulationMovementForMergedLine (testPackingList.TestPackingList)
test_05e_SimulationUnifyResourceOnSimulationMovementsForNonMergedLines (testPackingList.TestPackingList)
test_05f_SimulationChangeAndPartialAcceptDecision (testPackingList.TestPackingList)
test_06_SimulationChangeStartDate (testPackingList.TestPackingList)
test_07_SimulationChangeStartDateWithTwoOrderLine (testPackingList.TestPackingList)
test_07a_SimulationChangeStartDateWithTwoOrderLine (testPackingList.TestPackingList)
test_08_AddContainers (testPackingList.TestPackingList)
test_09_AddContainersWithVariatedResources (testPackingList.TestPackingList)
test_10_PackingListIncreaseQuantity (testPackingList.TestPackingList)
test_11_PackingListDecreaseTwoTimesQuantityAndUpdateDelivery (testPackingList.TestPackingList)
test_12_PackingListLineChangeResource (testPackingList.TestPackingList)
test_14_PackingListHavePriceCurrencyCategory (testPackingList.TestPackingList), Deliveries must have a price currency category. #252
test_15_CheckBuilderCanBeCalledTwiceSafely (testPackingList.TestPackingList)
test_16_simulation_reindexation_on_cancel (testPackingList.TestPackingList)
test_PackingList_viewAsODT (testPackingList.TestPackingList)
test_SplitAndDeferDoNothing (testPackingList.TestPackingList)
test_01_PackingListDecreaseQuantity (testPackingList.TestPurchasePackingList)
test_02_PackingListChangeDestination (testPackingList.TestPurchasePackingList)
test_03_PackingListChangeStartDate (testPackingList.TestPurchasePackingList)
test_04_PackingListDeleteLine (testPackingList.TestPurchasePackingList)
test_05_SimulationChangeQuantity (testPackingList.TestPurchasePackingList)
test_05a_SimulationChangeQuantityAndAcceptDecision (testPackingList.TestPurchasePackingList)
test_05b_SimulationChangeQuantityForMergedLine (testPackingList.TestPurchasePackingList)
test_05c_SimulationChangeQuantityAndAcceptDecisionForMergedLine (testPackingList.TestPurchasePackingList)
test_05d_SimulationChangeResourceOnOneSimulationMovementForMergedLine (testPackingList.TestPurchasePackingList)
test_05e_SimulationUnifyResourceOnSimulationMovementsForNonMergedLines (testPackingList.TestPurchasePackingList)
test_05f_SimulationChangeAndPartialAcceptDecision (testPackingList.TestPurchasePackingList)
test_06_SimulationChangeStartDate (testPackingList.TestPurchasePackingList)
test_07_SimulationChangeStartDateWithTwoOrderLine (testPackingList.TestPurchasePackingList)
test_07a_SimulationChangeStartDateWithTwoOrderLine (testPackingList.TestPurchasePackingList)
test_08_AddContainers (testPackingList.TestPurchasePackingList)
test_09_AddContainersWithVariatedResources (testPackingList.TestPurchasePackingList)
test_10_PackingListIncreaseQuantity (testPackingList.TestPurchasePackingList)
test_11_PackingListDecreaseTwoTimesQuantityAndUpdateDelivery (testPackingList.TestPurchasePackingList)
test_12_PackingListLineChangeResource (testPackingList.TestPurchasePackingList)
test_14_PackingListHavePriceCurrencyCategory (testPackingList.TestPurchasePackingList), Deliveries must have a price currency category. #252
test_15_CheckBuilderCanBeCalledTwiceSafely (testPackingList.TestPurchasePackingList)
test_16_simulation_reindexation_on_cancel (testPackingList.TestPurchasePackingList)
test_PackingList_viewAsODT (testPackingList.TestPurchasePackingList)
test_SplitAndDeferDoNothing (testPackingList.TestPurchasePackingList)
testPackingListRoundingPrecision (24 errors)
test_01_PackingListDecreaseQuantity (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_02_PackingListChangeDestination (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_03_PackingListChangeStartDate (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_04_PackingListDeleteLine (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_05_SimulationChangeQuantity (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_05a_SimulationChangeQuantityAndAcceptDecision (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_05b_SimulationChangeQuantityForMergedLine (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_05c_SimulationChangeQuantityAndAcceptDecisionForMergedLine (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_05d_SimulationChangeResourceOnOneSimulationMovementForMergedLine (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_05e_SimulationUnifyResourceOnSimulationMovementsForNonMergedLines (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_05f_SimulationChangeAndPartialAcceptDecision (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_06_SimulationChangeStartDate (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_07_SimulationChangeStartDateWithTwoOrderLine (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_07a_SimulationChangeStartDateWithTwoOrderLine (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_08_AddContainers (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_09_AddContainersWithVariatedResources (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_10_PackingListIncreaseQuantity (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_11_PackingListDecreaseTwoTimesQuantityAndUpdateDelivery (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_12_PackingListLineChangeResource (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_14_PackingListHavePriceCurrencyCategory (testPackingListRoundingPrecision.TestPackingListRoundingPrecision), Deliveries must have a price currency category. #252
test_15_CheckBuilderCanBeCalledTwiceSafely (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_16_simulation_reindexation_on_cancel (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_PackingList_viewAsODT (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
test_SplitAndDeferDoNothing (testPackingListRoundingPrecision.TestPackingListRoundingPrecision)
testPayroll (4 errors)
test_AccountingLineGeneration (testPayroll.TestPayroll)
test_NetSalaryReport (testPayroll.TestPayroll)
test_PayrollTaxesReport (testPayroll.TestPayroll)
test_PayrollTaxesReportDifferentSalaryRange (testPayroll.TestPayroll)
testPayroll_l10n_fr (1 errors)
test_01_getYearToDateSlice (testPayroll_l10n_fr.TestPayroll_l10n_fr), Check that is possible to calculate the total amount spend on a slice
testProject (1 errors)
testProject_getSourceProjectRelatedTaskReportList (testProject.TestProject)
testProxyField (1 failures)
testSkinSelectionTemplateField (testProxyField.TestProxyField)
testPurchaseOrder (19 errors)
test_10_Order_testSimulationState (testPurchaseOrder.TestPurchaseOrder)
test_11_testPropertiesAcquisition (testPurchaseOrder.TestPurchaseOrder)
test_12_testAppliedRuleGeneration (testPurchaseOrder.TestPurchaseOrder)
test_13_testAppliedRuleUpdate (testPurchaseOrder.TestPurchaseOrder)
test_15_deliveryBuilder (testPurchaseOrder.TestPurchaseOrder)
test_16_deliveryBuilderWithNoTic (testPurchaseOrder.TestPurchaseOrder)
test_17_orderExpand (testPurchaseOrder.TestPurchaseOrder)
test_18_SimulationStateIndexation (testPurchaseOrder.TestPurchaseOrder)
test_19_getMovementList (testPurchaseOrder.TestPurchaseOrder)
test_19b_getTotalQuantityAndPrice (testPurchaseOrder.TestPurchaseOrder)
test_20_testHierarchicalOrderAppliedRuleGeneration (testPurchaseOrder.TestPurchaseOrder)
test_Order_viewAsODT (testPurchaseOrder.TestPurchaseOrder)
test_Order_viewAsODT_big_image (testPurchaseOrder.TestPurchaseOrder)
test_Order_viewAsODT_hierarchical (testPurchaseOrder.TestPurchaseOrder)
test_Order_viewAsODT_image (testPurchaseOrder.TestPurchaseOrder)
test_Order_viewAsODT_non_ascii (testPurchaseOrder.TestPurchaseOrder)
test_Order_viewAsODT_person (testPurchaseOrder.TestPurchaseOrder)
test_order_cell_getTotalPrice (testPurchaseOrder.TestPurchaseOrder)
test_order_payment_condition_not_copied (testPurchaseOrder.TestPurchaseOrder)
testReturnedSalePackingList (8 errors)
test_01_ReturnedSalePackingListWithInventory (testReturnedSalePackingList.TestReturnedSalePackingList)
test_01_ReturnedSalePackingListWithInventory (testReturnedSalePackingList.TestReturnedSalePackingList)
test_02_ReturnedSalePackingListWorkflow (testReturnedSalePackingList.TestReturnedSalePackingList)
test_03_ReturnedSalePackingListWorkflowFail (testReturnedSalePackingList.TestReturnedSalePackingList)
test_04_ReturnedSalePackingListCreating (testReturnedSalePackingList.TestReturnedSalePackingList)
test_05_ReturnedSalePackingListDeleting (testReturnedSalePackingList.TestReturnedSalePackingList)
test_06_ReturnedSalePackingListWithCell (testReturnedSalePackingList.TestReturnedSalePackingList)
test_07_ReturnedSalePackingListWithCellDeleting (testReturnedSalePackingList.TestReturnedSalePackingList)
testRule (11 errors)
test_01_ValidatedRuleWithNoScript (testRule.TestRule)
test_02_WrongTestMethod (testRule.TestRule)
test_03_GoodTestMethod (testRule.TestRule)
test_04_NotValidatedRule (testRule.TestRule)
test_06_WrongDateRange (testRule.TestRule)
test_07_GoodDateRange (testRule.TestRule)
test_08_updateAppliedRule (testRule.TestRule)
test_09_expandTwoRules (testRule.TestRule)
test_10_expandAddsRule (testRule.TestRule)
test_11_expandRemovesRule (testRule.TestRule)
test_12_expandReplacesRule (testRule.TestRule)
testSerializeForm (1 failures)
test checking if the field values are of the proper type.
testTask (6 errors)
test_01_testTaskBasicUseCase (testTask.TestTask)
test_01_testTaskNoPrice (testTask.TestTask)
test_02_testMultipleLineTaskBasicUseCase (testTask.TestTask)
test_03_testTaskReportBasicUseCase (testTask.TestTask)
test_04_checkNotMergedTaskReportLine (testTask.TestTask)
test_05_testStrictSimulationSecurity (testTask.TestTask), Test creation of task and (automatic) task_report with strict
testTaskReportDivergence (3 errors)
test_01_TestReportLineChangeQuantity (testTaskReportDivergence.TestTaskReportDivergence)
test_02_TestReportListChangeDestination (testTaskReportDivergence.TestTaskReportDivergence)
test_03_TaskReportChangeStartDate (testTaskReportDivergence.TestTaskReportDivergence)
testTaskReporting (1 errors)
testProjectMontlyReport (testTaskReporting.TestTaskReporting)
testTemplate (2 failures)
test_NonDeliveryTemplateNotIndexable (testTemplate.TestTemplate)
test_manyTemplatesWithoutReindexation (testTemplate.TestTemplate), Check what happen when templates are created one by one without reindexation
testTestTaxLineTradeCondition (14 errors)
test_2_tax_lines_simulation (testTestTaxLineTradeCondition.TestTaxLineOrderSimulationSaleOrder)
test_tax_line_build (testTestTaxLineTradeCondition.TestTaxLineOrderSimulationSaleOrder)
test_tax_line_build_accounting (testTestTaxLineTradeCondition.TestTaxLineOrderSimulationSaleOrder)
test_tax_line_merged_build (testTestTaxLineTradeCondition.TestTaxLineOrderSimulationSaleOrder)
test_tax_line_simulation (testTestTaxLineTradeCondition.TestTaxLineOrderSimulationSaleOrder)
test_tax_line_updated_on_invoice_line_change (testTestTaxLineTradeCondition.TestTaxLineOrderSimulationSaleOrder)
test_2_tax_lines_simulation (testTestTaxLineTradeCondition.TestTaxLineOrderSimulationPurchaseOrder)
test_tax_line_build (testTestTaxLineTradeCondition.TestTaxLineOrderSimulationPurchaseOrder)
test_tax_line_build_accounting (testTestTaxLineTradeCondition.TestTaxLineOrderSimulationPurchaseOrder)
test_tax_line_merged_build (testTestTaxLineTradeCondition.TestTaxLineOrderSimulationPurchaseOrder)
test_tax_line_simulation (testTestTaxLineTradeCondition.TestTaxLineOrderSimulationPurchaseOrder)
test_tax_line_updated_on_invoice_line_change (testTestTaxLineTradeCondition.TestTaxLineOrderSimulationPurchaseOrder)
test_tax_line_simulation (testTestTaxLineTradeCondition.TestTaxLineInvoiceSimulationPurchaseInvoice)
test_tax_line_simulation (testTestTaxLineTradeCondition.TestTaxLineInvoiceSimulationSaleInvoice)
testTradeModelLine (36 errors)
test_BuildTradeModelLineAndAccountingFromInvoice (testTradeModelLine.TestTradeModelLineSale)
test_BuildTradeModelLineAndAccountingFromOrder (testTradeModelLine.TestTradeModelLineSale)
test_BuildTradeModelLineAndAccountingFromOrder (testTradeModelLine.TestTradeModelLineSale)
test_TradeConditionCircularCompositionIsSafe (testTradeModelLine.TestTradeModelLineSale)
test_TradeConditionTradeModelLineBasicComposition (testTradeModelLine.TestTradeModelLineSale)
test_TradeConditionTradeModelLineBasicCompositionWithOrder (testTradeModelLine.TestTradeModelLineSale)
test_TradeConditionTradeModelLineReferenceIsShadowingComposition (testTradeModelLine.TestTradeModelLineSale)
test_TradeConditionTradeModelLineReferenceIsShadowingCompositionWithOrder (testTradeModelLine.TestTradeModelLineSale)
test_TradeModelRuleSimulationBuildInvoice (testTradeModelLine.TestTradeModelLineSale)
test_TradeModelRuleSimulationBuildInvoiceBuildInvoiceTransactionLines (testTradeModelLine.TestTradeModelLineSale), Check that having properly configured invoice transaction rule it invoice transaction lines are nicely generated and have proper amounts
test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving (testTradeModelLine.TestTradeModelLineSale), Check that after changing invoice line invoice is properly diverged and it is possible to solve
test_TradeModelRuleSimulationBuildInvoiceNewInvoiceLineSupport (testTradeModelLine.TestTradeModelLineSale), Check how is supported addition of invoice line to invoice build from order
test_TradeModelRuleSimulationBuildInvoiceNewTradeCondition (testTradeModelLine.TestTradeModelLineSale), Check that after changing trade condition invoice is diverged
test_TradeModelRuleSimulationBuildInvoiceOrderSpecialise (testTradeModelLine.TestTradeModelLineSale)
test_TradeModelRuleSimulationExpand (testTradeModelLine.TestTradeModelLineSale), Tests tree of simulations from Trade Model Rule
test_TradeModelRuleSimulationExpandOrderSpecialise (testTradeModelLine.TestTradeModelLineSale)
test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuild (testTradeModelLine.TestTradeModelLineSale), Check building invoice after splitting packing list
test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio (testTradeModelLine.TestTradeModelLineSale), Check building invoice after splitting packing list using different ratio
test_TradeModelRuleSimulationReexpand (testTradeModelLine.TestTradeModelLineSale), Tests tree of simulations from Trade Model Rule with reexpanding
test_TradeModelRuleSimulationReexpandOrderSpecialise (testTradeModelLine.TestTradeModelLineSale)
test_TradeModelRuleSimulationReexpandResourceChange (testTradeModelLine.TestTradeModelLineSale), Tests tree of simulations from Trade Model Rule with reexpanding when resource changes on model
test_TradeModelRuleSimulationWithoutBPM (testTradeModelLine.TestTradeModelLineSale), Tests tree of simulations from Trade Model Rule when there is no BPM
test_TradeModelRuleSimulationWithoutTradeCondition (testTradeModelLine.TestTradeModelLineSale), Tests tree of simulations from Trade Model Rule when there is no Trade Condition
test_findSpecialiseValueList (testTradeModelLine.TestTradeModelLineSale)
test_findSpecialiseValueListWithPortalType (testTradeModelLine.TestTradeModelLineSale)
test_getAggregatedAmountList (testTradeModelLine.TestTradeModelLineSale)
test_getAggregatedAmountListOrderSpecialise (testTradeModelLine.TestTradeModelLineSale)
test_getAggregatedAmountListWithComplexModelLinesCreateInEasyOrder (testTradeModelLine.TestTradeModelLineSale)
test_getAggregatedAmountListWithComplexModelLinesCreateInRandomOrder (testTradeModelLine.TestTradeModelLineSale)
test_getAggregatedAmountList_afterUpdateAggregatedAmountList (testTradeModelLine.TestTradeModelLineSale)
test_getComplexTradeModelLineComposedList (testTradeModelLine.TestTradeModelLineSale), Test that list of contribution/application relations is sorted to do easy traversal
test_getTradeModelLineComposedList (testTradeModelLine.TestTradeModelLineSale), Test that list of contribution/application relations is sorted to do easy traversal
test_simpleGetTradeModelLineComposedList (testTradeModelLine.TestTradeModelLineSale)
test_tradeModelLineWithFixedPrice (testTradeModelLine.TestTradeModelLineSale)
test_tradeModelLineWithRounding (testTradeModelLine.TestTradeModelLineSale)
test_tradeModelLineWithTargetLevelSetting (testTradeModelLine.TestTradeModelLineSale)
testTradeModelLinePurchase (36 errors)
test_BuildTradeModelLineAndAccountingFromInvoice (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_BuildTradeModelLineAndAccountingFromOrder (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_BuildTradeModelLineAndAccountingFromOrder (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_TradeConditionCircularCompositionIsSafe (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_TradeConditionTradeModelLineBasicComposition (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_TradeConditionTradeModelLineBasicCompositionWithOrder (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_TradeConditionTradeModelLineReferenceIsShadowingComposition (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_TradeConditionTradeModelLineReferenceIsShadowingCompositionWithOrder (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_TradeModelRuleSimulationBuildInvoice (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_TradeModelRuleSimulationBuildInvoiceBuildInvoiceTransactionLines (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check that having properly configured invoice transaction rule it invoice transaction lines are nicely generated and have proper amounts
test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check that after changing invoice line invoice is properly diverged and it is possible to solve
test_TradeModelRuleSimulationBuildInvoiceNewInvoiceLineSupport (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check how is supported addition of invoice line to invoice build from order
test_TradeModelRuleSimulationBuildInvoiceNewTradeCondition (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check that after changing trade condition invoice is diverged
test_TradeModelRuleSimulationBuildInvoiceOrderSpecialise (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_TradeModelRuleSimulationExpand (testTradeModelLinePurchase.TestTradeModelLinePurchase), Tests tree of simulations from Trade Model Rule
test_TradeModelRuleSimulationExpandOrderSpecialise (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuild (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check building invoice after splitting packing list
test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check building invoice after splitting packing list using different ratio
test_TradeModelRuleSimulationReexpand (testTradeModelLinePurchase.TestTradeModelLinePurchase), Tests tree of simulations from Trade Model Rule with reexpanding
test_TradeModelRuleSimulationReexpandOrderSpecialise (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_TradeModelRuleSimulationReexpandResourceChange (testTradeModelLinePurchase.TestTradeModelLinePurchase), Tests tree of simulations from Trade Model Rule with reexpanding when resource changes on model
test_TradeModelRuleSimulationWithoutBPM (testTradeModelLinePurchase.TestTradeModelLinePurchase), Tests tree of simulations from Trade Model Rule when there is no BPM
test_TradeModelRuleSimulationWithoutTradeCondition (testTradeModelLinePurchase.TestTradeModelLinePurchase), Tests tree of simulations from Trade Model Rule when there is no Trade Condition
test_findSpecialiseValueList (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_findSpecialiseValueListWithPortalType (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_getAggregatedAmountList (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_getAggregatedAmountListOrderSpecialise (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_getAggregatedAmountListWithComplexModelLinesCreateInEasyOrder (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_getAggregatedAmountListWithComplexModelLinesCreateInRandomOrder (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_getAggregatedAmountList_afterUpdateAggregatedAmountList (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_getComplexTradeModelLineComposedList (testTradeModelLinePurchase.TestTradeModelLinePurchase), Test that list of contribution/application relations is sorted to do easy traversal
test_getTradeModelLineComposedList (testTradeModelLinePurchase.TestTradeModelLinePurchase), Test that list of contribution/application relations is sorted to do easy traversal
test_simpleGetTradeModelLineComposedList (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_tradeModelLineWithFixedPrice (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_tradeModelLineWithRounding (testTradeModelLinePurchase.TestTradeModelLinePurchase)
test_tradeModelLineWithTargetLevelSetting (testTradeModelLinePurchase.TestTradeModelLinePurchase)
testXHTML (3 failures)
test_configurationOfFieldLibrary (testXHTML.TestXHTML)
test_erp5_dms_Drawing_OOoDocument_viewAsWeb (testXHTML.TestXHTML)
test_erp5_dms_Presentation_OOoDocument_viewAsWeb (testXHTML.TestXHTML)
The following tests were at least partly skipped:
testBase (3 skips)
testMRP (4 skips)
testSQLCachedWorklist (1 skips)
testSelectionTool (7 skips)
Attached traceback has been truncated to the first 5000 lines
-------------- next part --------------
ERROR: test_04_SimpleInvoice (testAccountingRules.TestSaleAccountingRules), Simple Invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1549, in test_04_SimpleInvoice
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
PlanInvoice
> Tic
CheckFirstRuleIsApplied
CheckPaymentRuleIsApplied
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCoherantWithSimulation
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1058, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_04b_SimpleInvoiceConfirm (testAccountingRules.TestSaleAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1584, in test_04b_SimpleInvoiceConfirm
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 203, in stepCreateInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 lines.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1618, in test_04c_SimpleInvoiceTwoLines
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoiceTwoLines
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 203, in stepCreateInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_04d_SimpleInvoiceTwoCells (testAccountingRules.TestSaleAccountingRules), Simple Invoice, 2 cells.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1652, in test_04d_SimpleInvoiceTwoCells
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoiceTwoCells
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 203, in stepCreateInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestSaleAccountingRules), Add a new line then updateAppliedRule.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1689, in test_05a_SimpleInvoiceReExpandAddLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateEmptyInvoice
PlanInvoice
Tic
AddInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 203, in stepCreateInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestSaleAccountingRules), Tests that editing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1724, in test_05b_SimpleInvoiceReExpandEditLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateOtherSimpleInvoice
PlanInvoice
Tic
EditInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 203, in stepCreateInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestSaleAccountingRules), Tests that removing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1759, in test_05c_SimpleInvoiceReExpandDeleteLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
AddInvoiceLine
PlanInvoice
Tic
DeleteInvoiceLine
Tic
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 203, in stepCreateInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_05d_SimpleInvoiceReExpandCreateCell (testAccountingRules.TestSaleAccountingRules), Tests that replacing a line by cells updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1796, in test_05d_SimpleInvoiceReExpandCreateCell
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateOtherSimpleInvoice
PlanInvoice
Tic
AddCellsInInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 203, in stepCreateInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestSaleAccountingRules), Tests that updating an applied rule many times doesn't break the
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1859, in test_05e_SimpleInvoiceExpandManyTimes
""", quiet=quiet )
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
PlanInvoice
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 203, in stepCreateInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_06_MultiLineInvoice (testAccountingRules.TestSaleAccountingRules), Multiple lines invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1873, in test_06_MultiLineInvoice
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
Tic
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
Tic
CreateNotebookFranceCell
CreateBareboneFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateMultiLineInvoice
PlanInvoice
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForMultiLineInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 203, in stepCreateInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_planning_invoice_creates_simulation (testAccountingRules.TestSaleAccountingRules)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1910, in test_planning_invoice_creates_simulation
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
Tic
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
Tic
CreateNotebookFranceCell
CreateBareboneFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
Tic
PlanInvoice
Tic
CheckInvoiceSimulation
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 203, in stepCreateInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_04_SimpleInvoice (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1549, in test_04_SimpleInvoice
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
PlanInvoice
> Tic
CheckFirstRuleIsApplied
CheckPaymentRuleIsApplied
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCoherantWithSimulation
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1058, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_04b_SimpleInvoiceConfirm (testAccountingRules.TestPurchaseAccountingRules), Same test as SimpleInvoice but directly confirm the invoice
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1584, in test_04b_SimpleInvoiceConfirm
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 203, in stepCreateInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_04c_SimpleInvoiceTwoLines (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 lines.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1618, in test_04c_SimpleInvoiceTwoLines
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoiceTwoLines
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 203, in stepCreateInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_04d_SimpleInvoiceTwoCells (testAccountingRules.TestPurchaseAccountingRules), Simple Invoice, 2 cells.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1652, in test_04d_SimpleInvoiceTwoCells
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoiceTwoCells
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 203, in stepCreateInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_05a_SimpleInvoiceReExpandAddLine (testAccountingRules.TestPurchaseAccountingRules), Add a new line then updateAppliedRule.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1689, in test_05a_SimpleInvoiceReExpandAddLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateEmptyInvoice
PlanInvoice
Tic
AddInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 203, in stepCreateInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_05b_SimpleInvoiceReExpandEditLine (testAccountingRules.TestPurchaseAccountingRules), Tests that editing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1724, in test_05b_SimpleInvoiceReExpandEditLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateOtherSimpleInvoice
PlanInvoice
Tic
EditInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 203, in stepCreateInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_05c_SimpleInvoiceReExpandDeleteLine (testAccountingRules.TestPurchaseAccountingRules), Tests that removing a line updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1759, in test_05c_SimpleInvoiceReExpandDeleteLine
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
AddInvoiceLine
PlanInvoice
Tic
DeleteInvoiceLine
Tic
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 203, in stepCreateInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_05d_SimpleInvoiceReExpandCreateCell (testAccountingRules.TestPurchaseAccountingRules), Tests that replacing a line by cells updates simulation correctly
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1796, in test_05d_SimpleInvoiceReExpandCreateCell
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateOtherSimpleInvoice
PlanInvoice
Tic
AddCellsInInvoiceLine
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 203, in stepCreateInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_05e_SimpleInvoiceExpandManyTimes (testAccountingRules.TestPurchaseAccountingRules), Tests that updating an applied rule many times doesn't break the
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1859, in test_05e_SimpleInvoiceExpandManyTimes
""", quiet=quiet )
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
CreateNotebookFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
PlanInvoice
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
EditInvoiceLine
UpdateAppliedRule
Tic
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForSimpleInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 203, in stepCreateInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_06_MultiLineInvoice (testAccountingRules.TestPurchaseAccountingRules), Multiple lines invoice.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1873, in test_06_MultiLineInvoice
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
Tic
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
Tic
CreateNotebookFranceCell
CreateBareboneFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateMultiLineInvoice
PlanInvoice
ConfirmInvoice
Tic
CheckNoAccountingLinesBuiltYet
StartInvoice
Tic
CheckAccountingLinesCreatedForMultiLineInvoice
RebuildAndCheckNothingIsCreated
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 203, in stepCreateInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_planning_invoice_creates_simulation (testAccountingRules.TestPurchaseAccountingRules)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 1910, in test_planning_invoice_creates_simulation
self.playSequence("""
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateAccounts
CreateEntities
CreateCurrencies
CreateProducts
> CreateInvoiceTransactionRule
Tic
UpdateInvoiceTransactionRuleMatrix
ValidateInvoiceTransaction
Tic
CreateNotebookFranceCell
CreateBareboneFranceCell
Tic
ClearSimulation
ClearAccountingModule
CreateSimpleInvoice
Tic
PlanInvoice
Tic
CheckInvoiceSimulation
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 203, in stepCreateInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_65e6fa9e363739ef33a11ad15a3c2d99/accounting_module/simple_invoice', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_01_TwoInvoicesFromTwoPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 483, in test_01_TwoInvoicesFromTwoPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
> Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
DecreasePackingListLineQuantity
CheckPackingListIsCalculating
Tic
CheckPackingListIsDiverged
SplitAndDeferPackingList
Tic
CheckPackingListIsSolved
CheckPackingListSplitted
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
DefineNewPackingListContainer
Tic
CheckNewPackingListIsPacked
SetReadyPackingList
SetReadyNewPackingList
Tic
StartPackingList
StartNewPackingList
Tic
CheckTwoInvoices
RemoveDateMovementGroupForAdvancedTransactionBuilder
StartTwoInvoices
Tic
CheckInvoicesAndTransactionsConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1058, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_01_TwoInvoicesFromTwoPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_02_InvoiceDeletePackingListLine (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 509, in test_02_InvoiceDeletePackingListLine
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
Tic
SetContainerFullQuantity
Tic
CheckPackingListIsPacked
DeletePackingListLine
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_02_InvoiceDeletePackingListLine (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_03_InvoiceDecreaseQuantity (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 549, in test_03_InvoiceDecreaseQuantity
self.playSequence(sequence, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
DecreaseInvoiceLineQuantity
CheckInvoiceIsDivergent
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
SplitAndDeferInvoice
Tic
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
CheckInvoiceSplitted
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckInvoiceTransactionRule
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_03_InvoiceDecreaseQuantity (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_04_InvoiceChangeStartDateFail (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 584, in test_04_InvoiceChangeStartDateFail
self.playSequence(sequence, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
ChangeInvoiceStartDate
CheckInvoiceIsDivergent
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
UnifyStartDateWithDecisionInvoice
Tic
CheckInvoiceNotSplitted
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
CheckPackingListIsDivergent
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_04_InvoiceChangeStartDateFail (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_05_AcceptDecisionOnPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 650, in test_05_AcceptDecisionOnPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
CheckInvoicingRule
DecreasePackingListLineQuantity
SetContainerFullQuantity
CheckPackingListIsCalculating
Tic
CheckPackingListIsDiverged
AcceptDecisionQuantity
Tic
CheckPackingListIsSolved
CheckPackingListNotSplitted
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
StopPackingList
Tic
DeliverPackingList
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckInvoiceTransactionRule
StartInvoice
Tic
StopInvoice
Tic
DeliverInvoice
Tic
CheckInvoiceNotSplitted
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_05_AcceptDecisionOnPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_06_AcceptDecisionOnPackingListAndInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 736, in test_06_AcceptDecisionOnPackingListAndInvoice
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
CheckInvoicingRule
DecreasePackingListLineQuantity
SetContainerFullQuantity
CheckPackingListIsCalculating
Tic
CheckPackingListIsDiverged
AcceptDecisionQuantity
Tic
CheckPackingListIsSolved
CheckPackingListNotSplitted
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
StopPackingList
Tic
DeliverPackingList
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckInvoiceTransactionRule
IncreaseInvoiceLineQuantity
Tic
CheckInvoiceIsDiverged
AcceptDecisionQuantityInvoice
Tic
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
StartInvoice
Tic
StopInvoice
Tic
DeliverInvoice
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckInvoiceTransactionRule
CheckInvoiceNotSplitted
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_06_AcceptDecisionOnPackingListAndInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_07_SplitAndDeferInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 806, in test_07_SplitAndDeferInvoice
self.playSequence(sequence, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAccountingRules.py", line 112, in playSequence
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
StopPackingList
Tic
DeliverPackingList
Tic
CheckPackingListIsSolved
CheckPackingListNotSplitted
DecreaseInvoiceLineQuantity
CheckInvoiceIsDivergent
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
SplitAndDeferInvoice
Tic
StartInvoice
Tic
StopInvoice
Tic
DeliverInvoice
Tic
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
CheckInvoiceSplitted
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckInvoiceTransactionRule
SwitchInvoices
StartInvoice
Tic
StopInvoice
Tic
DeliverInvoice
Tic
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_07_SplitAndDeferInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_08_AcceptDecisionOnInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 874, in test_08_AcceptDecisionOnInvoice
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
CheckInvoiceTransactionRule
Tic
CheckInvoiceBuilding
StopPackingList
Tic
DeliverPackingList
Tic
CheckPackingListIsSolved
CheckPackingListNotSplitted
DecreaseInvoiceLineQuantity
CheckInvoiceIsDivergent
CheckInvoiceIsCalculating
Tic
CheckInvoiceIsDiverged
AcceptDecisionQuantityInvoice
Tic
StartInvoice
Tic
StopInvoice
Tic
DeliverInvoice
Tic
CheckPackingListIsNotDivergent
CheckPackingListIsSolved
CheckInvoiceTransactionRule
CheckInvoiceNotSplitted
CheckInvoiceIsNotDivergent
CheckInvoiceIsSolved
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_08_AcceptDecisionOnInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_09_Reference (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_10_ManuallyAddedMovements (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 928, in test_10_ManuallyAddedMovements
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
StartInvoice
Tic
AddInvoiceTransactionLines
Tic
CheckSimulationTrees
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_10_ManuallyAddedMovements (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_11_ManuallyAddedMovementsManyTransactions (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 962, in test_11_ManuallyAddedMovementsManyTransactions
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
Tic
CheckInvoiceIsSolved
StartInvoice
Tic
AddInvoiceLinesManyTransactions
Tic
CheckSimulationTrees
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_11_ManuallyAddedMovementsManyTransactions (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_12_compareInvoiceAndPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 984, in test_12_compareInvoiceAndPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
CheckInvoicesConsistency
CheckPackingListInvoice
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_12_compareInvoiceAndPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_13_acceptQuantityDivergenceOnInvoiceWithStartedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 1013, in test_13_acceptQuantityDivergenceOnInvoiceWithStartedPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
Tic
ChangeQuantityDoubledOnInvoice
Tic
CheckDivergedQuantityOnInvoice
AcceptDecisionOnInvoice
Tic
CheckDivergenceOnInvoice
CheckDivergedOnPackingList
CheckDivergedQuantityOnPackingList
AdoptPrevisionOnPackingList
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_13_acceptQuantityDivergenceOnInvoiceWithStartedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_AcceptQuantityDivergenceOnInvoiceWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice), Accept divergence with stopped packing list
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 298, in test_AcceptQuantityDivergenceOnInvoiceWithStoppedPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
Tic
SetReadyPackingList
Tic
StartPackingList
StopPackingList
Tic
ChangeQuantityDoubledOnInvoice
Tic
CheckDivergedQuantityOnInvoice
AcceptDecisionOnInvoice
Tic
CheckDivergenceOnInvoice
CheckSolvedOnPackingList
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_AcceptQuantityDivergenceOnInvoiceWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice), Accept divergence with stopped packing list
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice), Adopt quantity with stopped packing list
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 320, in test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
StartPackingList
StopPackingList
Tic
ChangeQuantityDoubledOnInvoice
Tic
CheckDivergedQuantityOnInvoice
AdoptPrevisionOnInvoice
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedSaleInvoice), Adopt quantity with stopped packing list
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_CreatingAccountingTransactionThroughInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice), test creating simple invoice and accounting transaction
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 263, in test_CreatingAccountingTransactionThroughInvoice
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
StartPackingList
Tic
StartRelatedInvoice
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_CreatingAccountingTransactionThroughInvoice (testAdvancedInvoicing.TestAdvancedSaleInvoice), test creating simple invoice and accounting transaction
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_InvoiceViewAsODT (testAdvancedInvoicing.TestAdvancedSaleInvoice), Create ODT printout
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 379, in test_InvoiceViewAsODT
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6), ('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_invoice_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_InvoiceViewAsODT (testAdvancedInvoicing.TestAdvancedSaleInvoice), Create ODT printout
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6), ('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_invoice_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_PackingListEditAndInvoiceRule (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 353, in test_PackingListEditAndInvoiceRule
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
EditPackingList
CheckDeliveryRuleNotAppliedOnPackingListEdit
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6), ('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_invoice_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_PackingListEditAndInvoiceRule (testAdvancedInvoicing.TestAdvancedSaleInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6), ('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_invoice_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_AcceptQuantityDivergenceOnInvoiceWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), Accept divergence with stopped packing list
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 298, in test_AcceptQuantityDivergenceOnInvoiceWithStoppedPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
Tic
Tic
SetReadyPackingList
Tic
StartPackingList
StopPackingList
Tic
ChangeQuantityDoubledOnInvoice
Tic
CheckDivergedQuantityOnInvoice
AcceptDecisionOnInvoice
Tic
CheckDivergenceOnInvoice
CheckSolvedOnPackingList
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6), ('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_invoice_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_AcceptQuantityDivergenceOnInvoiceWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), Accept divergence with stopped packing list
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6), ('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_invoice_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), Adopt quantity with stopped packing list
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 320, in test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
Tic
StartPackingList
StopPackingList
Tic
ChangeQuantityDoubledOnInvoice
Tic
CheckDivergedQuantityOnInvoice
AdoptPrevisionOnInvoice
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6), ('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_invoice_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_AdoptQuantityDivergenceOnInvoiceLineWithStoppedPackingList (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), Adopt quantity with stopped packing list
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6), ('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_invoice_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_CreatingAccountingTransactionThroughInvoice (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), test creating simple invoice and accounting transaction
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 263, in test_CreatingAccountingTransactionThroughInvoice
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
Tic
ReceivePackingList
Tic
StartRelatedInvoice
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6), ('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_invoice_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_CreatingAccountingTransactionThroughInvoice (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), test creating simple invoice and accounting transaction
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6), ('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_invoice_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_InvoiceViewAsODT (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), Create ODT printout
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 379, in test_InvoiceViewAsODT
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6), ('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_invoice_module/1', 'expand', -2, 6), ('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/purchase_invoice_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_InvoiceViewAsODT (testAdvancedInvoicing.TestAdvancedPurchaseInvoice), Create ODT printout
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6), ('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_invoice_module/1', 'expand', -2, 6), ('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/purchase_invoice_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_PackingListEditAndInvoiceRule (testAdvancedInvoicing.TestAdvancedPurchaseInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testAdvancedInvoicing.py", line 353, in test_PackingListEditAndInvoiceRule
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
Tic
EditPackingList
CheckDeliveryRuleNotAppliedOnPackingListEdit
CheckInvoicesConsistency
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6), ('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_invoice_module/1', 'expand', -2, 6), ('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/purchase_invoice_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_PackingListEditAndInvoiceRule (testAdvancedInvoicing.TestAdvancedPurchaseInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_order_module/1', 'expand', -2, 6), ('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/sale_invoice_module/1', 'expand', -2, 6), ('/erp5_portal_4817a4f44c6a9ddbef8b6fbe4dbe5933/purchase_invoice_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.InvoiceRule, line 70, in expand
Module Products.ERP5.Document.DeliveryRule, line 105, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_BusinessState_getRemainingTradePhaseList (testBPMCore.TestBPMImplementation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testBPMCore.py", line 402, in test_BusinessState_getRemainingTradePhaseList
self.stepTic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1058, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_f0cd414da2d9e3af83e3ad3f3fa340b8/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_165_checkCopyBuildInstall (testBusinessTemplate.TestBusinessTemplate)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 5889, in test_165_checkCopyBuildInstall
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
UseCoreBusinessTemplate
CopyCoreBusinessTemplate
BuildCopyCoreBusinessTemplate
> InstallCopyCoreBusinessTemplate
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 259, in stepInstallCopyCoreBusinessTemplate
bt.install()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Base.py", line 237, in __call__
result = apply(self.__dict__['_m'], (instance,) + args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 5272, in install
return self._install(**kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 5208, in _install
trashbin=trashbin, installed_bt=installed_bt)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 1834, in install
for wf_id in self._objects[path].split(', '):
AttributeError: 'list' object has no attribute 'split'
ERROR: test_166_checkXHtmlCopyBuildInstall (testBusinessTemplate.TestBusinessTemplate)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 5906, in test_166_checkXHtmlCopyBuildInstall
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
UseXHtmlBusinessTemplate
CopyXHtmlBusinessTemplate
UseCopyXHtmlBusinessTemplate
BuildCopyXHtmlBusinessTemplate
> InstallCurrentBusinessTemplate
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 2348, in stepInstallCurrentBusinessTemplate
import_bt.install(force=1)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Base.py", line 237, in __call__
result = apply(self.__dict__['_m'], (instance,) + args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 5272, in install
return self._install(**kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 5208, in _install
trashbin=trashbin, installed_bt=installed_bt)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 1494, in install
selection_string += ' %s' % \
AttributeError: 'list' object has no attribute 'replace'
FAIL: test_164_checkCopyBuild (testBusinessTemplate.TestBusinessTemplate)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 5873, in test_164_checkCopyBuild
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
UseCoreBusinessTemplate
CopyCoreBusinessTemplate
BuildCopyCoreBusinessTemplate
> CheckOriginalAndCopyBusinessTemplate
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 273, in stepCheckOriginalAndCopyBusinessTemplate
self.assertEquals(original_obj.getKeys(), copy_obj.getKeys())
AssertionError: ['StandardSecurity', 'DocumentExtraction'] != ['ExtensionTemplateItem/StandardSecurity', 'ExtensionTemplateItem/DocumentExtraction']
FAIL: test_Base_getEntityListFromFromHeader (testCRM.TestCRMMailIngestion)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testCRM.py", line 452, in test_Base_getEntityListFromFromHeader
'%r should return %r, but returned %r' %
AssertionError: '"me at erp5.org,sender at customer.com," <he at erp5.org>' should return ['person_module/he'], but returned ['person_module/sender', 'person_module/he']
ERROR: test_01_delivery_mode_on_sale_packing_list_and_invoice (testConversionInSimulation.TestConversionInSimulation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testConversionInSimulation.py", line 762, in test_01_delivery_mode_on_sale_packing_list_and_invoice
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_7ca2b36fb48f47ee846348288da87eec/portal_deliveries/sale_packing_list_builder', 'build', -1, 1), ('/erp5_portal_7ca2b36fb48f47ee846348288da87eec/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_01_delivery_mode_on_sale_packing_list_and_invoice (testConversionInSimulation.TestConversionInSimulation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 235, in tearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_7ca2b36fb48f47ee846348288da87eec/portal_deliveries/sale_packing_list_builder', 'build', -1, 1), ('/erp5_portal_7ca2b36fb48f47ee846348288da87eec/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_01_destination_total_asset_price_on_accounting_lines (testConversionInSimulation.TestConversionInSimulation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 127, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 201, in setUp
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_7ca2b36fb48f47ee846348288da87eec/portal_deliveries/sale_packing_list_builder', 'build', -1, 1), ('/erp5_portal_7ca2b36fb48f47ee846348288da87eec/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_01_diverged_purchase_packing_list_source_total_asset_price (testConversionInSimulation.TestConversionInSimulation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 127, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 201, in setUp
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_7ca2b36fb48f47ee846348288da87eec/portal_deliveries/sale_packing_list_builder', 'build', -1, 1), ('/erp5_portal_7ca2b36fb48f47ee846348288da87eec/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_01_diverged_sale_packing_list_destination_total_asset_price (testConversionInSimulation.TestConversionInSimulation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 127, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 201, in setUp
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_7ca2b36fb48f47ee846348288da87eec/portal_deliveries/sale_packing_list_builder', 'build', -1, 1), ('/erp5_portal_7ca2b36fb48f47ee846348288da87eec/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_01_quantity_unit_on_sale_packing_list (testConversionInSimulation.TestConversionInSimulation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 127, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 201, in setUp
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_7ca2b36fb48f47ee846348288da87eec/portal_deliveries/sale_packing_list_builder', 'build', -1, 1), ('/erp5_portal_7ca2b36fb48f47ee846348288da87eec/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_01_simulation_movement_destination_asset_price (testConversionInSimulation.TestConversionInSimulation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 127, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 201, in setUp
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_7ca2b36fb48f47ee846348288da87eec/portal_deliveries/sale_packing_list_builder', 'build', -1, 1), ('/erp5_portal_7ca2b36fb48f47ee846348288da87eec/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_01_simulation_movement_source_asset_price (testConversionInSimulation.TestConversionInSimulation)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 127, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testAccounting.py", line 201, in setUp
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_7ca2b36fb48f47ee846348288da87eec/portal_deliveries/sale_packing_list_builder', 'build', -1, 1), ('/erp5_portal_7ca2b36fb48f47ee846348288da87eec/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_01_IfNested (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testDeliveryBuilderToSupportMultipleLines.py", line 227, in test_01_IfNested
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
> Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
UpdateBuilderForMultipleLineList
SetPythonScriptForDeliveryBuilder
StartPackingList
CheckInvoicingRule
Tic
GetRelatedInvoiceFromPackingList
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1058, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_a6499ed6772253b806bc09e1b3375a67/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_01_IfNested (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_a6499ed6772253b806bc09e1b3375a67/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_02_AdoptingPrevision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testDeliveryBuilderToSupportMultipleLines.py", line 265, in test_02_AdoptingPrevision
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
UpdateBuilderForMultipleLineList
SetPythonScriptForDeliveryBuilder
StartPackingList
CheckInvoicingRule
Tic
GetRelatedInvoiceFromPackingList
UpdatePackingList
Tic
AcceptDecisionPackingListQuantity
Tic
CheckInvoiceIsDivergent
CheckInvoiceIsDiverged
AdoptPrevisionInvoiceQuantity
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_a6499ed6772253b806bc09e1b3375a67/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_02_AdoptingPrevision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_a6499ed6772253b806bc09e1b3375a67/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_03_AcceptingDecision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testDeliveryBuilderToSupportMultipleLines.py", line 300, in test_03_AcceptingDecision
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
UpdateBuilderForMultipleLineList
SetPythonScriptForDeliveryBuilder
StartPackingList
CheckInvoicingRule
Tic
GetRelatedInvoiceFromPackingList
UpdateInvoice
Tic
CheckInvoiceIsDivergent
AcceptDecisionInvoiceQuantity
Tic
CheckInvoiceIsNotDivergent
CheckPackingListIsDivergent
AdoptPrevisionPackingListQuantity
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_a6499ed6772253b806bc09e1b3375a67/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_03_AcceptingDecision (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_a6499ed6772253b806bc09e1b3375a67/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_04_MergingMultipleSaleOrders (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testDeliveryBuilderToSupportMultipleLines.py", line 355, in test_04_MergingMultipleSaleOrders
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
> CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
UpdateBuilderForMultipleLineList
SetPythonScriptForDeliveryBuilder
StartPackingList
CheckInvoicingRule
Tic
GetRelatedInvoiceFromPackingList
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
Tic
CreateOrderLine
SetOrderLineResource
UpdateOrder
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetFillContainerLine
Tic
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceIsDivergent
AdoptPrevisionInvoiceQuantity
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 161, in stepCreateSaleInvoiceTransactionRule
self.createInvoiceTransactionRule(resource=sequence.get('resource'))
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 69, in <lambda>
wrapper = lambda *args, **kw: unrestricted_apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/UnrestrictedMethod.py", line 105, in unrestricted_apply
return apply(function, args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 185, in createInvoiceTransactionRule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_a6499ed6772253b806bc09e1b3375a67/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_04_MergingMultipleSaleOrders (testDeliveryBuilderToSupportMultipleLines.TestNestedLine)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testInvoice.py", line 133, in beforeTearDown
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_a6499ed6772253b806bc09e1b3375a67/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_01_QuantityDivergenceTester (testDivergenceTester.TestDivergenceTester)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 127, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 496, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testDivergenceTester.py", line 96, in afterSetUp
self.bootstrapSite()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testDivergenceTester.py", line 83, in bootstrapSite
sequence_list.play(self, quiet=self.quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
RemoveDivergenceTesters
CreateOrganisation1
CreateOrganisation2
CreateOrganisation3
CreateOrder
SetOrderProfile
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
> Tic
ConfirmOrder
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1058, in stepTic
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_033e79206e19bc7642a0aab22adcaaad/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
FAIL: test_02_CategoryDivergenceTester (testDivergenceTester.TestDivergenceTester)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testDivergenceTester.py", line 229, in test_02_CategoryDivergenceTester
sequence_list.play(self, quiet=self.quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
> GetPackingList
CheckPackingListIsNotDivergent
SetNewSource
CheckPackingListIsNotDivergent
AddCategoryDivergenceTester
CheckPackingListIsNotDivergent
ConfigureCategoryDivergenceTesterForSource
CheckPackingListIsDivergent
SetPreviousSource
CheckPackingListIsNotDivergent
Tic
RemoveDivergenceTesters
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testDivergenceTester.py", line 104, in stepGetPackingList
self.assertEquals(1, len(sql_result))
AssertionError: 1 != 0
FAIL: test_03_PropertyDivergenceTester (testDivergenceTester.TestDivergenceTester)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testDivergenceTester.py", line 288, in test_03_PropertyDivergenceTester
sequence_list.play(self, quiet=self.quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
> GetPackingList
CheckPackingListIsNotDivergent
SetNewStartDate
CheckPackingListIsNotDivergent
AddPropertyDivergenceTester
CheckPackingListIsNotDivergent
ConfigurePropertyDivergenceTesterForStartDate
CheckPackingListIsDivergent
SetPreviousStartDate
CheckPackingListIsNotDivergent
Tic
RemoveDivergenceTesters
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testDivergenceTester.py", line 104, in stepGetPackingList
self.assertEquals(1, len(sql_result))
AssertionError: 1 != 0
FAIL: test_04_CategoryDivergenceTester (testDivergenceTester.TestDivergenceTester)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testDivergenceTester.py", line 339, in test_04_CategoryDivergenceTester
sequence_list.play(self, quiet=self.quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
> GetPackingList
CheckPackingListIsNotDivergent
SetNewAggregate
CheckPackingListIsNotDivergent
AddCategoryDivergenceTester
CheckPackingListIsNotDivergent
ConfigureCategoryDivergenceTesterForAggregate
CheckPackingListIsDivergent
SetPreviousAggregate
CheckPackingListIsNotDivergent
Tic
RemoveDivergenceTesters
Tic
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testDivergenceTester.py", line 104, in stepGetPackingList
self.assertEquals(1, len(sql_result))
AssertionError: 1 != 0
FAIL: test_complex_query (testERP5Catalog.TestERP5Catalog)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Catalog/tests/testERP5Catalog.py", line 2321, in test_complex_query
self.assertEqual(len(catalog(query=query)), 3)
AssertionError: 2 != 3
ERROR: test_11_finalizeShopping (testERP5Commerce.TestCommerce)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testERP5Commerce.py", line 604, in test_11_finalizeShopping
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_016dc8c80e30da7776272ee5bd30bf9c/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_11_finalizeShopping (testERP5Commerce.TestCommerce)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 149, in run
self.tearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 1018, in tearDown
return PortalTestCase.tearDown(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/base.py", line 102, in tearDown
self.beforeTearDown()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testERP5Commerce.py", line 180, in beforeTearDown
self.clearModule(self.portal.web_site_module)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testERP5Commerce.py", line 177, in clearModule
self.tic()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 698, in tic
raise RuntimeError,\
RuntimeError: tic is looping forever. These messages are pending: [('/erp5_portal_016dc8c80e30da7776272ee5bd30bf9c/sale_order_module/1', 'expand', -2, 6)]
Last error message:
TypeError
_getExpandablePropertyDict() takes exactly 4 arguments (3 given)
Traceback (innermost last):
Module Products.CMFActivity.ActivityTool, line 293, in __call__
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5.Document.Delivery, line 790, in expand
Module Products.ERP5Type.UnrestrictedMethod, line 69, in <lambda>
Module Products.ERP5Type.UnrestrictedMethod, line 105, in unrestricted_apply
Module Products.ERP5Type.Document.AppliedRule, line 115, in expand
Module Products.ERP5Type.Document.OrderRule, line 104, in expand
TypeError: _getExpandablePropertyDict() takes exactly 4 arguments (3 given)
ERROR: test_12_getAvailableShippingResourceList (testERP5Commerce.TestCommerce)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 127, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 496, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testERP5Commerce.py", line 129, in afterSetUp
id='EUR')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 455, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 163, in newContent
is_indexable=is_indexable
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/ERP5Type.py", line 357, in constructInstance
ob = m(id, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Utils.py", line 459, in __call__
folder._setObject(id, o)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 884, in _setObject
return CMFBTreeFolder._setObject(self, *args, **kw)
File "/usr/lib/erp5/lib/python/Products/BTreeFolder2/BTreeFolder2.py", line 408, in _setObject
v=self._checkId(id)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 878, in _checkId
return CMFBTreeFolder._checkId(self, id, allow_dup)
File "/usr/lib/erp5/lib/python/Products/CMFCore/CMFBTreeFolder.py", line 65, in _checkId
PortalFolderBase._checkId(self, id, allow_dup)
File "/usr/lib/erp5/lib/python/Products/CMFCore/PortalFolder.py", line 426, in _checkId
PortalFolderBase.inheritedAttribute('_checkId')(self, id, allow_dup)
File "/usr/lib/erp5/lib/python/OFS/ObjectManager.py", line 84, in checkValidId
raise BadRequest, (
BadRequest: The id "EUR" is invalid - it is already in use.
ERROR: test_13_getFormatedData (testERP5Commerce.TestCommerce)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 127, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 496, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testERP5Commerce.py", line 129, in afterSetUp
id='EUR')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 455, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 163, in newContent
is_indexable=is_indexable
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/ERP5Type.py", line 357, in constructInstance
ob = m(id, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Utils.py", line 459, in __call__
folder._setObject(id, o)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 884, in _setObject
return CMFBTreeFolder._setObject(self, *args, **kw)
File "/usr/lib/erp5/lib/python/Products/BTreeFolder2/BTreeFolder2.py", line 408, in _setObject
v=self._checkId(id)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 878, in _checkId
return CMFBTreeFolder._checkId(self, id, allow_dup)
File "/usr/lib/erp5/lib/python/Products/CMFCore/CMFBTreeFolder.py", line 65, in _checkId
PortalFolderBase._checkId(self, id, allow_dup)
File "/usr/lib/erp5/lib/python/Products/CMFCore/PortalFolder.py", line 426, in _checkId
PortalFolderBase.inheritedAttribute('_checkId')(self, id, allow_dup)
File "/usr/lib/erp5/lib/python/OFS/ObjectManager.py", line 84, in checkValidId
raise BadRequest, (
BadRequest: The id "EUR" is invalid - it is already in use.
ERROR: test_14_getSelectedShippingResource (testERP5Commerce.TestCommerce)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 127, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 496, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testERP5Commerce.py", line 129, in afterSetUp
id='EUR')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 455, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 163, in newContent
is_indexable=is_indexable
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/ERP5Type.py", line 357, in constructInstance
ob = m(id, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Utils.py", line 459, in __call__
folder._setObject(id, o)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 884, in _setObject
return CMFBTreeFolder._setObject(self, *args, **kw)
File "/usr/lib/erp5/lib/python/Products/BTreeFolder2/BTreeFolder2.py", line 408, in _setObject
v=self._checkId(id)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 878, in _checkId
return CMFBTreeFolder._checkId(self, id, allow_dup)
File "/usr/lib/erp5/lib/python/Products/CMFCore/CMFBTreeFolder.py", line 65, in _checkId
PortalFolderBase._checkId(self, id, allow_dup)
File "/usr/lib/erp5/lib/python/Products/CMFCore/PortalFolder.py", line 426, in _checkId
PortalFolderBase.inheritedAttribute('_checkId')(self, id, allow_dup)
File "/usr/lib/erp5/lib/python/OFS/ObjectManager.py", line 84, in checkValidId
raise BadRequest, (
BadRequest: The id "EUR" is invalid - it is already in use.
ERROR: test_15_getShoppingCartDefaultCurrency (testERP5Commerce.TestCommerce)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 127, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 496, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testERP5Commerce.py", line 129, in afterSetUp
id='EUR')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 455, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 163, in newContent
is_indexable=is_indexable
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/ERP5Type.py", line 357, in constructInstance
ob = m(id, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Utils.py", line 459, in __call__
folder._setObject(id, o)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 884, in _setObject
return CMFBTreeFolder._setObject(self, *args, **kw)
File "/usr/lib/erp5/lib/python/Products/BTreeFolder2/BTreeFolder2.py", line 408, in _setObject
v=self._checkId(id)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 878, in _checkId
return CMFBTreeFolder._checkId(self, id, allow_dup)
File "/usr/lib/erp5/lib/python/Products/CMFCore/CMFBTreeFolder.py", line 65, in _checkId
PortalFolderBase._checkId(self, id, allow_dup)
File "/usr/lib/erp5/lib/python/Products/CMFCore/PortalFolder.py", line 426, in _checkId
PortalFolderBase.inheritedAttribute('_checkId')(self, id, allow_dup)
File "/usr/lib/erp5/lib/python/OFS/ObjectManager.py", line 84, in checkValidId
raise BadRequest, (
BadRequest: The id "EUR" is invalid - it is already in use.
ERROR: test_16_simulatePaypalPayment (testERP5Commerce.TestCommerce)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 127, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 496, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testERP5Commerce.py", line 129, in afterSetUp
id='EUR')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 455, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 163, in newContent
is_indexable=is_indexable
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/ERP5Type.py", line 357, in constructInstance
ob = m(id, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Utils.py", line 459, in __call__
folder._setObject(id, o)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 884, in _setObject
return CMFBTreeFolder._setObject(self, *args, **kw)
File "/usr/lib/erp5/lib/python/Products/BTreeFolder2/BTreeFolder2.py", line 408, in _setObject
v=self._checkId(id)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 878, in _checkId
return CMFBTreeFolder._checkId(self, id, allow_dup)
File "/usr/lib/erp5/lib/python/Products/CMFCore/CMFBTreeFolder.py", line 65, in _checkId
PortalFolderBase._checkId(self, id, allow_dup)
File "/usr/lib/erp5/lib/python/Products/CMFCore/PortalFolder.py", line 426, in _checkId
PortalFolderBase.inheritedAttribute('_checkId')(self, id, allow_dup)
File "/usr/lib/erp5/lib/python/OFS/ObjectManager.py", line 84, in checkValidId
raise BadRequest, (
BadRequest: The id "EUR" is invalid - it is already in use.
ERROR: test_17_getProductListFromWebSection (testERP5Commerce.TestCommerce)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 127, in run
self.setUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/tests/ERP5TypeTestCase.py", line 496, in setUp
PortalTestCase.setUp(self)
File "/usr/lib/erp5/lib/python/Testing/ZopeTestCase/PortalTestCase.py", line 62, in setUp
self.afterSetUp()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testERP5Commerce.py", line 129, in afterSetUp
id='EUR')
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 455, in newContent
return FolderMixIn.newContent(self, *args, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 163, in newContent
is_indexable=is_indexable
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/ERP5Type.py", line 357, in constructInstance
ob = m(id, **kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Utils.py", line 459, in __call__
folder._setObject(id, o)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 884, in _setObject
return CMFBTreeFolder._setObject(self, *args, **kw)
File "/usr/lib/erp5/lib/python/Products/BTreeFolder2/BTreeFolder2.py", line 408, in _setObject
v=self._checkId(id)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Type/Core/Folder.py", line 878, in _checkId
return CMFBTreeFolder._checkId(self, id, allow_dup)
File "/usr/lib/erp5/lib/python/Products/CMFCore/CMFBTreeFolder.py", line 65, in _checkId
PortalFolderBase._checkId(self, id, allow_dup)
File "/usr/lib/erp5/lib/python/Products/CMFCore/PortalFolder.py", line 426, in _checkId
PortalFolderBase.inheritedAttribute('_checkId')(self, id, allow_dup)
File "/usr/lib/erp5/lib/python/OFS/ObjectManager.py", line 84, in checkValidId
raise BadRequest, (
BadRequest: The id "EUR" is invalid - it is already in use.
(truncated) ...
More information about the Erp5-report
mailing list