[Erp5-report] ERP5 r32262: 3127 Tests, 19 Errors, 21 Failures, 19 Skips
nobody at svn.erp5.org
nobody at svn.erp5.org
Thu Feb 4 16:11:46 CET 2010
Test Suite: ERP5
Revision: 32262
Result: FAIL
All tests: 3127
Failures: 21
Errors: 19
Skips: 19
The following tests failed:
testBusinessTemplate (1 failures, 1 errors)
test_165_checkCopyBuildInstall (testBusinessTemplate.TestBusinessTemplate)
test_164_checkCopyBuild (testBusinessTemplate.TestBusinessTemplate)
testCRM (1 failures)
test_Base_getEntityListFromFromHeader (testCRM.TestCRMMailIngestion)
testERP5Catalog (1 failures, 3 skips)
test_complex_query (testERP5Catalog.TestERP5Catalog)
testERP5Interfaces (17 errors)
test_Products.ERP5.AggregatedAmountList_AggregatedAmountList_implements_IAmountList (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.BusinessPath_BusinessPath_implements_IBusinessPath (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.BusinessPath_BusinessPath_implements_ICategoryAccessProvider (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.Document_Document_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.EmailDocument_EmailDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.Event_Event_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.File_File_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.Image_Image_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.OOoDocument_OOoDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TextDocument_TextDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TradeCondition_TradeCondition_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TradeModelCell_TradeModelCell_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TradeModelLine_TradeModelLine_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TradeModelRule_TradeModelRule_implements_IRule (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.TransformationRule_TransformationRule_implements_IRule (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.Transformation_Transformation_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
test_Products.ERP5Type.Document.Transformation_Transformation_implements_IVariated (testERP5Interfaces.TestERP5Interfaces)
testERP5Simulation (2 failures)
test_01_quantity_unit_copied (testERP5Simulation.TestERP5SimulationInvoice)
test_16a_ManuallyAddedMovementsManyTransactions (testERP5Simulation.TestERP5SimulationInvoice)
testERP5TypeInterfaces (1 errors)
test_Products.ERP5Type.ConsistencyMessage_ConsistencyMessage_implements_IConsistencyMessage (testERP5TypeInterfaces.TestERP5TypeInterfaces)
testFormPrintoutAsODT (1 failures, 1 skips)
test_02_Table_07_CellFormat (testFormPrintoutAsODT.TestFormPrintoutAsODT), 7. Normal case: cell format cetting
testICal (1 failures)
test_01_renderEvent (testICal.TestICal)
testOpenOrder (2 failures)
testOpenOrderRule (testOpenOrder.TestOpenOrder)
testPeriodicityDateList (testOpenOrder.TestOpenOrder)
testPayroll_l10n_fr (1 failures)
test_01_getYearToDateSlice (testPayroll_l10n_fr.TestPayroll_l10n_fr), Check that is possible to calculate the total amount spend on a slice
testProxyField (1 failures)
testSkinSelectionTemplateField (testProxyField.TestProxyField)
testSerializeForm (1 failures)
test checking if the field values are of the proper type.
testTemplate (2 failures)
test_NonDeliveryTemplateNotIndexable (testTemplate.TestTemplate)
test_manyTemplatesWithoutReindexation (testTemplate.TestTemplate), Check what happen when templates are created one by one without reindexation
testTradeModelLine (2 failures)
test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving (testTradeModelLine.TestTradeModelLineSale), Check that after changing invoice line invoice is properly diverged and it is possible to solve
test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio (testTradeModelLine.TestTradeModelLineSale), Check building invoice after splitting packing list using different ratio
testTradeModelLinePurchase (2 failures)
test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check that after changing invoice line invoice is properly diverged and it is possible to solve
test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check building invoice after splitting packing list using different ratio
testXHTML (3 failures)
test_configurationOfFieldLibrary (testXHTML.TestXHTML)
test_erp5_dms_Drawing_OOoDocument_viewAsWeb (testXHTML.TestXHTML)
test_erp5_dms_Presentation_OOoDocument_viewAsWeb (testXHTML.TestXHTML)
The following tests were at least partly skipped:
testBase (3 skips)
testMRP (4 skips)
testSQLCachedWorklist (1 skips)
testSelectionTool (7 skips)
-------------- next part --------------
ERROR: test_165_checkCopyBuildInstall (testBusinessTemplate.TestBusinessTemplate)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 5844, in test_165_checkCopyBuildInstall
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
UseCoreBusinessTemplate
CopyCoreBusinessTemplate
BuildCopyCoreBusinessTemplate
> InstallCopyCoreBusinessTemplate
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 216, in stepInstallCopyCoreBusinessTemplate
bt.install()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/Base.py", line 237, in __call__
result = apply(self.__dict__['_m'], (instance,) + args, kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 5239, in install
return self._install(**kw)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 5175, in _install
item.install(self, force=force, object_to_update=object_to_update, trashbin=trashbin, installed_bt=installed_bt)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/Document/BusinessTemplate.py", line 1827, in install
for wf_id in self._objects[path].split(', '):
AttributeError: 'list' object has no attribute 'split'
FAIL: test_164_checkCopyBuild (testBusinessTemplate.TestBusinessTemplate)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 5828, in test_164_checkCopyBuild
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
UseCoreBusinessTemplate
CopyCoreBusinessTemplate
BuildCopyCoreBusinessTemplate
> CheckOriginalAndCopyBusinessTemplate
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testBusinessTemplate.py", line 230, in stepCheckOriginalAndCopyBusinessTemplate
self.assertEquals(original_obj.getKeys(), copy_obj.getKeys())
AssertionError: ['StandardSecurity', 'DocumentExtraction'] != ['ExtensionTemplateItem/StandardSecurity', 'ExtensionTemplateItem/DocumentExtraction']
FAIL: test_Base_getEntityListFromFromHeader (testCRM.TestCRMMailIngestion)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testCRM.py", line 452, in test_Base_getEntityListFromFromHeader
'%r should return %r, but returned %r' %
AssertionError: '"me at erp5.org,sender at customer.com," <he at erp5.org>' should return ['person_module/he'], but returned ['person_module/sender', 'person_module/he']
FAIL: test_complex_query (testERP5Catalog.TestERP5Catalog)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Catalog/tests/testERP5Catalog.py", line 2323, in test_complex_query
self.assertEqual(len(catalog(query=query)), 3)
AssertionError: 2 != 3
ERROR: test_Products.ERP5.AggregatedAmountList_AggregatedAmountList_implements_IAmountList (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IAmountList.IAmountList>
ERROR: test_Products.ERP5Type.Document.BusinessPath_BusinessPath_implements_IBusinessPath (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IBusinessPath.IBusinessPath>
The getExpectedCompletionDuration attribute was not provided.
ERROR: test_Products.ERP5Type.Document.BusinessPath_BusinessPath_implements_ICategoryAccessProvider (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 85, in _verify
raise BrokenMethodImplementation(n, mess)
BrokenMethodImplementation: The implementation of _getAcquiredCategoryMembershipList violates its contract
because implementation doesn't allow enough arguments.
ERROR: test_Products.ERP5Type.Document.Document_Document_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>
ERROR: test_Products.ERP5Type.Document.EmailDocument_EmailDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>
ERROR: test_Products.ERP5Type.Document.Event_Event_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>
ERROR: test_Products.ERP5Type.Document.File_File_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>
ERROR: test_Products.ERP5Type.Document.Image_Image_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>
ERROR: test_Products.ERP5Type.Document.OOoDocument_OOoDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>
ERROR: test_Products.ERP5Type.Document.TextDocument_TextDocument_implements_IDocument (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 51, in _verify
raise DoesNotImplement(iface)
DoesNotImplement: An object does not implement interface <InterfaceClass IDocument.IDocument>
ERROR: test_Products.ERP5Type.Document.TradeCondition_TradeCondition_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IAmountGenerator.IAmountGenerator>
The getGeneratedAmountList attribute was not provided.
ERROR: test_Products.ERP5Type.Document.TradeModelCell_TradeModelCell_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IAmountGenerator.IAmountGenerator>
The getGeneratedAmountList attribute was not provided.
ERROR: test_Products.ERP5Type.Document.TradeModelLine_TradeModelLine_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IAmountGenerator.IAmountGenerator>
The getGeneratedAmountList attribute was not provided.
ERROR: test_Products.ERP5Type.Document.TradeModelRule_TradeModelRule_implements_IRule (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IRule.IRule>
The updateMovementCollection attribute was not provided.
ERROR: test_Products.ERP5Type.Document.TransformationRule_TransformationRule_implements_IRule (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IRule.IRule>
The updateMovementCollection attribute was not provided.
ERROR: test_Products.ERP5Type.Document.Transformation_Transformation_implements_IAmountGenerator (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass IAmountGenerator.IAmountGenerator>
The getGeneratedAmountList attribute was not provided.
ERROR: test_Products.ERP5Type.Document.Transformation_Transformation_implements_IVariated (testERP5Interfaces.TestERP5Interfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 85, in _verify
raise BrokenMethodImplementation(n, mess)
BrokenMethodImplementation: The implementation of getVariationRangeCategoryItemList violates its contract
because implementation doesn't allow enough arguments.
FAIL: test_01_quantity_unit_copied (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testInvoice.py", line 1434, in test_01_quantity_unit_copied
self.assertEquals(len(movement_list),2)
AssertionError: 1 != 2
FAIL: test_16a_ManuallyAddedMovementsManyTransactions (testERP5Simulation.TestERP5SimulationInvoice)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2943, in test_16a_ManuallyAddedMovementsManyTransactions
sequence_list.play(self, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateEntities
CreateCurrency
CreateSaleInvoiceTransactionRule
CreateOrder
SetOrderProfile
SetOrderPriceCurrency
CreateNotVariatedResource
Tic
CreateOrderLine
SetOrderLineResource
SetOrderLineDefaultValues
OrderOrder
Tic
CheckDeliveryBuilding
ConfirmOrder
Tic
CheckOrderRule
CheckOrderSimulation
CheckDeliveryBuilding
AddPackingListContainer
AddPackingListContainerLine
SetContainerLineFullQuantity
Tic
CheckPackingListIsPacked
SetReadyPackingList
Tic
StartPackingList
CheckInvoicingRule
Tic
CheckInvoiceBuilding
RebuildAndCheckNothingIsCreated
CheckInvoicesConsistency
AddInvoiceLinesManyTransactions
Tic
> CheckInvoiceIsSolved
StartInvoice
Tic
CheckSimulationTrees
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/unit_test/Products/ERP5/tests/testInvoice.py", line 2287, in stepCheckInvoiceIsSolved
invoice.getDivergenceList())
AssertionError: [<DivergenceMessage object at 0x8440bd8
'tested_property': 'quantity'
'prevision_value': -3.0
'mapping': {'value': 0, 'property_name': 'quantity'}
'object_relative_url': 'accounting_module/24/2'
'simulation_movement': <SimulationMovement at /erp5_portal_99149783a620b553467610cb3e8b7b12/portal_simulation/72/2>
'decision_value': 3.0
'message': 'The difference of ${property_name} between decision and prevision is larger than ${value}.'
'tester_relative_url': 'portal_rules/new_invoice_rule/quantity_tester'>, <DivergenceMessage object at 0x8fdf3f8
'tested_property': 'resource'
'prevision_value': ['currency_module/EUR']
'mapping': {'property_name': 'resource'}
'object_relative_url': 'accounting_module/24/2'
'simulation_movement': <SimulationMovement at /erp5_portal_99149783a620b553467610cb3e8b7b12/portal_simulation/72/2>
'decision_value': ['apparel_model_module/54']
'message': 'The values of ${property_name} category are different between decision and prevision.'
'tester_relative_url': 'portal_rules/new_invoice_rule/resource_tester'>, <DivergenceMessage object at 0x945ba70
'tested_property': 'resource'
'prevision_value': ['currency_module/EUR']
'mapping': {'property_name': 'resource'}
'object_relative_url': 'accounting_module/24/2'
'simulation_movement': <SimulationMovement at /erp5_portal_99149783a620b553467610cb3e8b7b12/portal_simulation/72/1>
'decision_value': ['apparel_model_module/54']
'message': 'The values of ${property_name} category are different between decision and prevision.'
'tester_relative_url': 'portal_rules/new_invoice_rule/resource_tester'>]
ERROR: test_Products.ERP5Type.ConsistencyMessage_ConsistencyMessage_implements_IConsistencyMessage (testERP5TypeInterfaces.TestERP5TypeInterfaces)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.3/build/Products/ERP5Type/tests/testERP5TypeInterfaces.py", line 66, in testMethod
verifyClass(Interface, Klass)
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 90, in verifyClass
return _verify(iface, candidate, tentative, vtype='c')
File "/usr/lib/erp5/lib/python/zope/interface/verify.py", line 60, in _verify
raise BrokenImplementation(iface, n)
BrokenImplementation: An object has failed to implement interface <InterfaceClass Products.ERP5Type.interfaces.consistency_message.IConsistencyMessage>
The fix attribute was not provided.
FAIL: test_02_Table_07_CellFormat (testFormPrintoutAsODT.TestFormPrintoutAsODT), 7. Normal case: cell format cetting
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5OOo/tests/testFormPrintoutAsODT.py", line 624, in test_02_Table_07_CellFormat
self.assertEqual(date_column.attrib[date_value_attrib], '2009-04-20')
AssertionError: '2009-04-19' != '2009-04-20'
FAIL: test_01_renderEvent (testICal.TestICal)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testICal.py", line 151, in test_01_renderEvent
self.assertEquals( # if this fail for you, try to set $TZ to Europe/Paris
AssertionError: '20070815T143000Z' != '20070815T083000Z'
FAIL: testOpenOrderRule (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 303, in testOpenOrderRule
[(DateTime(3000,2,10,10,0), DateTime(3000,2,11,10,0)),
AssertionError: [(DateTime('3000/02/10 10:00:00 US/Eastern'), DateTime('3000/02/11 10:00:00 US/Eastern')), (DateTime('3000/02/17 10:00:00 US/Eastern'), DateTime('3000/02/18 10:00:00 US/Eastern')), (DateTime('3000/02/24 10:00:00 US/Eastern'), DateTime('3000/02/25 10:00:00 US/Eastern')), (DateTime('3000/03/03 10:00:00 US/Eastern'), DateTime('3000/03/04 10:00:00 US/Eastern')), (DateTime('3000/03/10 10:00:00 US/Eastern'), DateTime('3000/03/11 10:00:00 US/Eastern'))] != [(DateTime('3000/02/10 10:00:00 US/Eastern'), DateTime('3000/02/11 10:00:00 US/Eastern')), (DateTime('3000/02/17 10:00:00 US/Eastern'), DateTime('3000/02/18 10:00:00 US/Eastern')), (DateTime('3000/02/24 10:00:00 US/Eastern'), DateTime('3000/02/25 10:00:00 US/Eastern')), (DateTime('3000/03/03 10:00:00 US/Eastern'), DateTime('3000/03/04 10:00:00 US/Eastern')), (DateTime('3000/03/10 10:00:00 GMT-4'), DateTime('3000/03/11 10:00:00 GMT-4'))]
FAIL: testPeriodicityDateList (testOpenOrder.TestOpenOrder)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testOpenOrder.py", line 185, in testPeriodicityDateList
[(D(2008,2,1,0,1), DateTime(2008,2,29)),
AssertionError: [(DateTime('2008/02/01 00:01:00 US/Eastern'), DateTime('2008/02/29')), (DateTime('2008/03/01 00:01:00 US/Eastern'), DateTime('2008/03/31')), (DateTime('2008/04/01 00:01:00 US/Eastern'), DateTime('2008/04/30')), (DateTime('2008/05/01 00:01:00 US/Eastern'), DateTime('2008/05/31')), (DateTime('2008/06/01 00:01:00 US/Eastern'), DateTime('2008/06/30')), (DateTime('2008/07/01 00:01:00 US/Eastern'), DateTime('2008/07/31')), (DateTime('2008/08/01 00:01:00 US/Eastern'), DateTime('2008/08/31')), (DateTime('2008/09/01 00:01:00 US/Eastern'), DateTime('2008/09/30')), (DateTime('2008/10/01 00:01:00 US/Eastern'), DateTime('2008/10/31')), (DateTime('2008/11/01 00:01:00 US/Eastern'), DateTime('2008/11/30'))] != [(DateTime('2008/02/01 00:01:00 US/Eastern'), DateTime('2008/02/29')), (DateTime('2008/03/01 00:01:00 US/Eastern'), DateTime('2008/03/31')), (DateTime('2008/04/01 00:01:00 GMT-4'), DateTime('2008/04/30')), (DateTime('2008/05/01 00:01:00 GMT-4'), DateTime('2008/05/31')), (DateTime('2008/06/01 00:01:00 GMT-4'), DateTime('2008/06/30')), (DateTime('2008/07/01 00:01:00 GMT-4'), DateTime('2008/07/31')), (DateTime('2008/08/01 00:01:00 GMT-4'), DateTime('2008/08/31')), (DateTime('2008/09/01 00:01:00 GMT-4'), DateTime('2008/09/30')), (DateTime('2008/10/01 00:01:00 GMT-4'), DateTime('2008/10/31')), (DateTime('2008/11/01 00:01:00 GMT-4'), DateTime('2008/11/30'))]
FAIL: test_01_getYearToDateSlice (testPayroll_l10n_fr.TestPayroll_l10n_fr), Check that is possible to calculate the total amount spend on a slice
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPayroll_l10n_fr.py", line 118, in test_01_getYearToDateSlice
sequence_list.play(self)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateUrssafService
CreateLabourService
CreateEmployer
CreateEmployee
CreatePriceCurrency
CreateModelWithSlices
SetCurrencyOnModel
ModelCreateUrssafModelLineWithSlices
UrssafModelLineWithSlicesCreateMovements
CreateBasicPaysheet
PaysheetSetModelAndApplyIt
PaysheetCreateLabourPaySheetLine
CreateBusinessProcess
CreateBusinessPath
CreateUrssafRoubaixOrganisation
ModifyBusinessPathTradePhase
ModelSpecialiseBusinessProcess
Tic
CheckUpdateAggregatedAmountListReturnUsingSlices
PaysheetApplyTransformation
Tic
CheckPaysheetLineAreCreatedUsingSlices
CheckPaysheetLineAmountsUsingSlices
CheckUpdateAggregatedAmountListReturnNothing
CheckPaysheetLineAmountsUsingSlices
CreateBasicPaysheet
PaysheetSetModelAndApplyIt
PaysheetCreateLabourPaySheetLine
CreateBusinessProcess
CreateBusinessPath
CreateUrssafRoubaixOrganisation
ModifyBusinessPathTradePhase
ModelSpecialiseBusinessProcess
Tic
CheckUpdateAggregatedAmountListReturnUsingSlices
PaysheetApplyTransformation
Tic
CheckPaysheetLineAreCreatedUsingSlices
CheckPaysheetLineAmountsUsingSlices
CheckUpdateAggregatedAmountListReturnNothing
CheckPaysheetLineAmountsUsingSlices
> CheckYearToDateSliceAmount
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testPayroll_l10n_fr.py", line 89, in stepCheckYearToDateSliceAmount
paysheet_list[1].PaySheetTransaction_getYearToDateSlice(\
AssertionError: 400 != 0.0
FAIL: testSkinSelectionTemplateField (testProxyField.TestProxyField)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5Form/tests/testProxyField.py", line 189, in testSkinSelectionTemplateField
self.assertEquals('Customized Title', field.get_value('title'))
AssertionError: 'Customized Title' != 'Generic Title'
FAIL: test checking if the field values are of the proper type.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/Formulator/tests/testSerializeForm.py", line 358, in test_fieldValueTypes
self.assertEquals(field.values, field2.values)
AssertionError: {'alternate_name': '', 'title': 'Test Title', 'date_separator': '', 'editable': 0, 'input_order': 'mdy', 'start_datetime': None, 'description': '', 'default_now': 0, 'allow_empty_time': 0, 'ampm_time_style': 0, 'hide_day': 0, 'date_only': 0, 'time_separator': '$', 'hidden': 0, 'default': None, 'css_class': 'test_css', 'required': 1, 'enabled': 1, 'input_style': 'list', 'external_validator': '', 'hidden_day_is_last_day': 0, 'end_datetime': None, 'timezone_style': 0} != {'alternate_name': '', 'title': 'Test Title', 'date_separator': '', 'editable': 0, 'input_order': 'mdy', 'start_datetime': '', 'description': '', 'default_now': 0, 'allow_empty_time': 0, 'ampm_time_style': 0, 'hide_day': 0, 'date_only': 0, 'time_separator': '$', 'hidden': 0, 'default': '', 'css_class': 'test_css', 'required': 1, 'enabled': 1, 'input_style': 'list', 'external_validator': '', 'hidden_day_is_last_day': 0, 'end_datetime': '', 'timezone_style': 0}
FAIL: test_NonDeliveryTemplateNotIndexable (testTemplate.TestTemplate)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testTemplate.py", line 345, in test_NonDeliveryTemplateNotIndexable
self._testTemplateNotIndexable(document)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testTemplate.py", line 315, in _testTemplateNotIndexable
self.assertEquals(0, len(self.portal.portal_catalog(uid=template.getUid())))
AssertionError: 0 != 1
FAIL: test_manyTemplatesWithoutReindexation (testTemplate.TestTemplate), Check what happen when templates are created one by one without reindexation
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.1/build/unit_test/Products/ERP5/tests/testTemplate.py", line 279, in test_manyTemplatesWithoutReindexation
self.assertEqual(len(preference_id_list) + 1, len(new_preference_id_list))
AssertionError: 1 != 2
FAIL: test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving (testTradeModelLine.TestTradeModelLineSale), Check that after changing invoice line invoice is properly diverged and it is possible to solve
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2104, in test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving
sequence_list.play(self, quiet=True)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateServiceTax
CreateServiceDiscount
CreatePriceCurrency
CreateProductDiscounted
CreateProductTaxed
CreateProductDiscountedTaxed
CreateSource
CreateSourceSection
CreateDestination
CreateDestinationSection
Tic
CreateBusinessProcess
CreateBusinessState
ModifyBusinessStateTaxed
CreateBusinessState
ModifyBusinessStateInvoiced
CreateBusinessPath
ModifyBusinessPathTaxing
CreateBusinessPath
ModifyBusinessPathDiscounting
CreateTradeCondition
SpecialiseTradeConditionWithBusinessProcess
CreateTradeModelLine
ModifyTradeModelLineTax
CreateTradeModelLine
ModifyTradeModelLineDiscount
Tic
CreateOrder
SpecialiseOrderTradeCondition
FillOrder
Tic
CreateOrderLine
ModifyOrderLineTaxed
CreateOrderLine
ModifyOrderLineDiscounted
CreateOrderLine
ModifyOrderLineDiscountedTaxed
Tic
CheckOrderComplexTradeConditionAggregatedAmountList
CheckOrderLineTaxedAggregatedAmountList
CheckOrderLineDiscountedTaxedAggregatedAmountList
CheckOrderLineDiscountedAggregatedAmountList
Tic
PlanOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
ConfirmOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetPackingList
PackPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
StartPackingList
StopPackingList
DeliverPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetInvoice
CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
GetInvoiceLineDiscounted
GetInvoiceLineDiscountedTaxed
GetInvoiceLineTaxed
ModifyQuantityInvoiceLineDiscounted
ModifyQuantityInvoiceLineDiscountedTaxed
ModifyQuantityInvoiceLineTaxed
Tic
CheckInvoiceCausalityStateDiverged
AcceptDecisionQuantityInvoice
Tic
> CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 459, in stepCheckInvoiceCausalityStateSolved
invoice.getDivergenceList())
AssertionError: [<DivergenceMessage object at 0x89aa050
'decision_value': 1.9999999999999998
'divergence_scope': 'quantity'
'prevision_value': 5.0
'mapping': {}
'object_relative_url': 'accounting_module/5/5'
'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/8/3/1/1/2/1>
'tested_property': 'quantity'
'decision_title': '1.9999999999999998'
'message': 'Quantity'>, <DivergenceMessage object at 0x7acd3f8
'decision_value': -0.60000000000000009
'divergence_scope': 'quantity'
'prevision_value': -1.5
'mapping': {}
'object_relative_url': 'accounting_module/5/5'
'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/8/2/1/1/2/2>
'tested_property': 'quantity'
'decision_title': '-0.60000000000000009'
'message': 'Quantity'>, <DivergenceMessage object at 0xa4a7e60
'decision_value': 28.5
'divergence_scope': 'quantity'
'prevision_value': 71.25
'mapping': {}
'object_relative_url': 'accounting_module/5/5'
'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/8/1/1/1/2/2>
'tested_property': 'quantity'
'decision_title': '28.5'
'message': 'Quantity'>, <DivergenceMessage object at 0x7546bd8
'decision_value': 12.0
'divergence_scope': 'quantity'
'prevision_value': 30.0
'mapping': {}
'object_relative_url': 'accounting_module/5/4'
'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/8/2/1/1/2/1>
'tested_property': 'quantity'
'decision_title': '12.0'
'message': 'Quantity'>, <DivergenceMessage object at 0x7844950
'decision_value': 30.0
'divergence_scope': 'quantity'
'prevision_value': 75.0
'mapping': {}
'object_relative_url': 'accounting_module/5/4'
'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/8/1/1/1/2/1>
'tested_property': 'quantity'
'decision_title': '30.0'
'message': 'Quantity'>]
FAIL: test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio (testTradeModelLine.TestTradeModelLineSale), Check building invoice after splitting packing list using different ratio
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2185, in test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio
sequence_list.play(self, quiet=True)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateServiceTax
CreateServiceDiscount
CreatePriceCurrency
CreateProductDiscounted
CreateProductTaxed
CreateProductDiscountedTaxed
CreateSource
CreateSourceSection
CreateDestination
CreateDestinationSection
Tic
CreateBusinessProcess
CreateBusinessState
ModifyBusinessStateTaxed
CreateBusinessState
ModifyBusinessStateInvoiced
CreateBusinessPath
ModifyBusinessPathTaxing
CreateBusinessPath
ModifyBusinessPathDiscounting
CreateTradeCondition
SpecialiseTradeConditionWithBusinessProcess
CreateTradeModelLine
ModifyTradeModelLineTax
CreateTradeModelLine
ModifyTradeModelLineDiscount
Tic
CreateOrder
SpecialiseOrderTradeCondition
FillOrder
Tic
CreateOrderLine
ModifyOrderLineTaxed
CreateOrderLine
ModifyOrderLineDiscounted
CreateOrderLine
ModifyOrderLineDiscountedTaxed
Tic
CheckOrderComplexTradeConditionAggregatedAmountList
CheckOrderLineTaxedAggregatedAmountList
CheckOrderLineDiscountedTaxedAggregatedAmountList
CheckOrderLineDiscountedAggregatedAmountList
Tic
PlanOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
ConfirmOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetPackingList
DecreasePackingListLineListQuantity
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
CheckPackingListDiverged
SplitAndDeferPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetNewPackingList
PackPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
StartPackingList
StopPackingList
DeliverPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetInvoice
> CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
SetNewPackingListAsPackingList
PackPackingList
Tic
StartPackingList
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
StopPackingList
DeliverPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetInvoice
CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.2/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 459, in stepCheckInvoiceCausalityStateSolved
invoice.getDivergenceList())
AssertionError: [<DivergenceMessage object at 0xa6538c0
'decision_value': -0.049999999999999989
'divergence_scope': 'property'
'prevision_value': -0.050000000000000003
'mapping': {}
'object_relative_url': 'accounting_module/12/5'
'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/21/1/1/1/2/1>
'tested_property': 'price'
'message': 'Price'>, <DivergenceMessage object at 0xa614368
'decision_value': -0.049999999999999989
'divergence_scope': 'property'
'prevision_value': -0.050000000000000003
'mapping': {}
'object_relative_url': 'accounting_module/12/5'
'simulation_movement': <SimulationMovement at /erp5_portal_ad634f4ece1810b728855e61e26535eb/portal_simulation/21/2/1/1/2/1>
'tested_property': 'price'
'message': 'Price'>]
FAIL: test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check that after changing invoice line invoice is properly diverged and it is possible to solve
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2104, in test_TradeModelRuleSimulationBuildInvoiceInvoiceLineModifyDivergencyAndSolving
sequence_list.play(self, quiet=True)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateServiceTax
CreateServiceDiscount
CreatePriceCurrency
CreateProductDiscounted
CreateProductTaxed
CreateProductDiscountedTaxed
CreateSource
CreateSourceSection
CreateDestination
CreateDestinationSection
Tic
CreateBusinessProcess
CreateBusinessState
ModifyBusinessStateTaxed
CreateBusinessState
ModifyBusinessStateInvoiced
CreateBusinessPath
ModifyBusinessPathTaxing
CreateBusinessPath
ModifyBusinessPathDiscounting
CreateTradeCondition
SpecialiseTradeConditionWithBusinessProcess
CreateTradeModelLine
ModifyTradeModelLineTax
CreateTradeModelLine
ModifyTradeModelLineDiscount
Tic
CreateOrder
SpecialiseOrderTradeCondition
FillOrder
Tic
CreateOrderLine
ModifyOrderLineTaxed
CreateOrderLine
ModifyOrderLineDiscounted
CreateOrderLine
ModifyOrderLineDiscountedTaxed
Tic
CheckOrderComplexTradeConditionAggregatedAmountList
CheckOrderLineTaxedAggregatedAmountList
CheckOrderLineDiscountedTaxedAggregatedAmountList
CheckOrderLineDiscountedAggregatedAmountList
Tic
PlanOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
ConfirmOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetPackingList
PackPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
StartPackingList
StopPackingList
DeliverPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetInvoice
CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
GetInvoiceLineDiscounted
GetInvoiceLineDiscountedTaxed
GetInvoiceLineTaxed
ModifyQuantityInvoiceLineDiscounted
ModifyQuantityInvoiceLineDiscountedTaxed
ModifyQuantityInvoiceLineTaxed
Tic
CheckInvoiceCausalityStateDiverged
AcceptDecisionQuantityInvoice
Tic
> CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 459, in stepCheckInvoiceCausalityStateSolved
invoice.getDivergenceList())
AssertionError: [<DivergenceMessage object at 0x8c898c0
'decision_value': 1.9999999999999998
'divergence_scope': 'quantity'
'prevision_value': 5.0
'mapping': {}
'object_relative_url': 'accounting_module/5/5'
'simulation_movement': <SimulationMovement at /erp5_portal_f961ca546667fb6832d17eeef19b90b9/portal_simulation/8/3/1/1/2/1>
'tested_property': 'quantity'
'decision_title': '1.9999999999999998'
'message': 'Quantity'>, <DivergenceMessage object at 0x6573b90
'decision_value': -0.60000000000000009
'divergence_scope': 'quantity'
'prevision_value': -1.5
'mapping': {}
'object_relative_url': 'accounting_module/5/5'
'simulation_movement': <SimulationMovement at /erp5_portal_f961ca546667fb6832d17eeef19b90b9/portal_simulation/8/2/1/1/2/2>
'tested_property': 'quantity'
'decision_title': '-0.60000000000000009'
'message': 'Quantity'>, <DivergenceMessage object at 0x85cdea8
'decision_value': 28.5
'divergence_scope': 'quantity'
'prevision_value': 71.25
'mapping': {}
'object_relative_url': 'accounting_module/5/5'
'simulation_movement': <SimulationMovement at /erp5_portal_f961ca546667fb6832d17eeef19b90b9/portal_simulation/8/1/1/1/2/2>
'tested_property': 'quantity'
'decision_title': '28.5'
'message': 'Quantity'>, <DivergenceMessage object at 0x92cfa70
'decision_value': 12.0
'divergence_scope': 'quantity'
'prevision_value': 30.0
'mapping': {}
'object_relative_url': 'accounting_module/5/4'
'simulation_movement': <SimulationMovement at /erp5_portal_f961ca546667fb6832d17eeef19b90b9/portal_simulation/8/2/1/1/2/1>
'tested_property': 'quantity'
'decision_title': '12.0'
'message': 'Quantity'>, <DivergenceMessage object at 0x99bbcf8
'decision_value': 30.0
'divergence_scope': 'quantity'
'prevision_value': 75.0
'mapping': {}
'object_relative_url': 'accounting_module/5/4'
'simulation_movement': <SimulationMovement at /erp5_portal_f961ca546667fb6832d17eeef19b90b9/portal_simulation/8/1/1/1/2/1>
'tested_property': 'quantity'
'decision_title': '30.0'
'message': 'Quantity'>]
FAIL: test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio (testTradeModelLinePurchase.TestTradeModelLinePurchase), Check building invoice after splitting packing list using different ratio
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 2185, in test_TradeModelRuleSimulationPackingListSplitBuildInvoiceBuildDifferentRatio
sequence_list.play(self, quiet=True)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 192, in play
sequence.play(context, sequence_number=i, quiet=quiet)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 113, in play
self._step_list[self._played_index] \
Current Sequence:
CreateServiceTax
CreateServiceDiscount
CreatePriceCurrency
CreateProductDiscounted
CreateProductTaxed
CreateProductDiscountedTaxed
CreateSource
CreateSourceSection
CreateDestination
CreateDestinationSection
Tic
CreateBusinessProcess
CreateBusinessState
ModifyBusinessStateTaxed
CreateBusinessState
ModifyBusinessStateInvoiced
CreateBusinessPath
ModifyBusinessPathTaxing
CreateBusinessPath
ModifyBusinessPathDiscounting
CreateTradeCondition
SpecialiseTradeConditionWithBusinessProcess
CreateTradeModelLine
ModifyTradeModelLineTax
CreateTradeModelLine
ModifyTradeModelLineDiscount
Tic
CreateOrder
SpecialiseOrderTradeCondition
FillOrder
Tic
CreateOrderLine
ModifyOrderLineTaxed
CreateOrderLine
ModifyOrderLineDiscounted
CreateOrderLine
ModifyOrderLineDiscountedTaxed
Tic
CheckOrderComplexTradeConditionAggregatedAmountList
CheckOrderLineTaxedAggregatedAmountList
CheckOrderLineDiscountedTaxedAggregatedAmountList
CheckOrderLineDiscountedAggregatedAmountList
Tic
PlanOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
ConfirmOrder
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetPackingList
DecreasePackingListLineListQuantity
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
CheckPackingListDiverged
SplitAndDeferPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetNewPackingList
PackPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
StartPackingList
StopPackingList
DeliverPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetInvoice
> CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
SetNewPackingListAsPackingList
PackPackingList
Tic
StartPackingList
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
StopPackingList
DeliverPackingList
Tic
CheckOrderLineTaxedSimulation
CheckOrderLineDiscountedSimulation
CheckOrderLineDiscountedTaxedSimulation
GetInvoice
CheckInvoiceCausalityStateSolved
CheckInvoiceNormalMovements
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5Type/tests/Sequence.py", line 96, in play
method(sequence=sequence)
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.6/build/unit_test/Products/ERP5/tests/testTradeModelLine.py", line 459, in stepCheckInvoiceCausalityStateSolved
invoice.getDivergenceList())
AssertionError: [<DivergenceMessage object at 0xaeb1128
'decision_value': -0.049999999999999989
'divergence_scope': 'property'
'prevision_value': -0.050000000000000003
'mapping': {}
'object_relative_url': 'accounting_module/12/5'
'simulation_movement': <SimulationMovement at /erp5_portal_f961ca546667fb6832d17eeef19b90b9/portal_simulation/21/2/1/1/2/1>
'tested_property': 'price'
'message': 'Price'>, <DivergenceMessage object at 0x99eb0e0
'decision_value': -0.049999999999999989
'divergence_scope': 'property'
'prevision_value': -0.050000000000000003
'mapping': {}
'object_relative_url': 'accounting_module/12/5'
'simulation_movement': <SimulationMovement at /erp5_portal_f961ca546667fb6832d17eeef19b90b9/portal_simulation/21/1/1/1/2/1>
'tested_property': 'price'
'message': 'Price'>]
FAIL: test_configurationOfFieldLibrary (testXHTML.TestXHTML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testXHTML.py", line 186, in test_configurationOfFieldLibrary
self.fail(message) # uncomment above for details on each field
AssertionError: 5426 fields to modify
FAIL: test_erp5_dms_Drawing_OOoDocument_viewAsWeb (testXHTML.TestXHTML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testXHTML.py", line 406, in testMethod
bt_name=bt_name))
AssertionError: Using w3c validator to parse the view "OOoDocument_viewAsWeb" (from erp5_dms bt) with warnings displayed :
Error: line 521 column 43 : there is no attribute "class"
Error: line 521 column 63 : there is no attribute "style"
Error: line 521 column 105 : there is no attribute "src"
Error: line 521 column 222 : there is no attribute "onload"
Error: line 521 column 244 : element "iframe" undefined
FAIL: test_erp5_dms_Presentation_OOoDocument_viewAsWeb (testXHTML.TestXHTML)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/products/ERP5Type/tests/backportUnittest.py", line 134, in run
testMethod()
File "/home/buildbot/slave/full.ERP5.blade-nxd1-10.4/build/unit_test/Products/ERP5/tests/testXHTML.py", line 406, in testMethod
bt_name=bt_name))
AssertionError: Using w3c validator to parse the view "OOoDocument_viewAsWeb" (from erp5_dms bt) with warnings displayed :
Error: line 521 column 43 : there is no attribute "class"
Error: line 521 column 63 : there is no attribute "style"
Error: line 521 column 105 : there is no attribute "src"
Error: line 521 column 222 : there is no attribute "onload"
Error: line 521 column 244 : element "iframe" undefined
More information about the Erp5-report
mailing list